[Bug 112173] New: GPU HANG: ecode 9:0:0x00000000, hang on rcs0

bugzilla-daemon at freedesktop.org bugzilla-daemon at freedesktop.org
Wed Oct 30 07:44:03 UTC 2019


https://bugs.freedesktop.org/show_bug.cgi?id=112173

            Bug ID: 112173
           Summary: GPU HANG: ecode 9:0:0x00000000, hang on rcs0
           Product: DRI
           Version: XOrg git
          Hardware: x86-64 (AMD64)
                OS: Linux (All)
            Status: NEW
          Severity: normal
          Priority: not set
         Component: DRM/Intel
          Assignee: intel-gfx-bugs at lists.freedesktop.org
          Reporter: patrik.simons at neotide.fi
        QA Contact: intel-gfx-bugs at lists.freedesktop.org
                CC: intel-gfx-bugs at lists.freedesktop.org

Created attachment 145840
  --> https://bugs.freedesktop.org/attachment.cgi?id=145840&action=edit
GPU crash dump saved to /sys/class/drm/card0/error

The display stopped responding for a little while, so I checked dmesg
and the drm system asked for a bug report. Hasn't happened before.
First boot of kernel 5.3.8.

~ $ uname -m
x86_64
~ $ uname -r
5.3.8
~ $ cat /etc/debian_version 
bullseye/sid

Machine: Lenovo T460s
Display connector: HDMI

~ $ dmesg|tail -n 13
[    3.083590] broken atomic modeset userspace detected, disabling atomic
[    3.179853] psmouse serio2: trackpoint: IBM TrackPoint firmware: 0x0e,
buttons: 3/3
[    3.373863] input: TPPS/2 IBM TrackPoint as
/devices/platform/i8042/serio1/serio2/input/input18
[    6.819680] e1000e: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control:
Rx/Tx
[    6.819798] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[   63.504767] [drm:intel_cpu_fifo_underrun_irq_handler] *ERROR* CPU pipe B
FIFO underrun
[   73.208311] i915 0000:00:02.0: GPU HANG: ecode 9:0:0x00000000, hang on rcs0
[   73.208312] [drm] GPU hangs can indicate a bug anywhere in the entire gfx
stack, including userspace.
[   73.208312] [drm] Please file a _new_ bug report on bugs.freedesktop.org
against DRI -> DRM/Intel
[   73.208312] [drm] drm/i915 developers can then reassign to the right
component if it's not a kernel issue.
[   73.208313] [drm] The gpu crash dump is required to analyze gpu hangs, so
please always attach it.
[   73.208313] [drm] GPU crash dump saved to /sys/class/drm/card0/error
[   73.209322] i915 0000:00:02.0: Resetting rcs0 for hang on rcs0

-- 
You are receiving this mail because:
You are the QA Contact for the bug.
You are the assignee for the bug.
You are on the CC list for the bug.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://lists.freedesktop.org/archives/intel-gfx-bugs/attachments/20191030/2feef88a/attachment.html>


More information about the intel-gfx-bugs mailing list