<html> <head> <base href="https://bugs.freedesktop.org/"> </head> <body> <div> <a class="bz_bug_link bz_status_NEEDINFO " title="NEEDINFO - [SKL][bisected] Screen regularly returns from power save mode" href="https://bugs.freedesktop.org/show_bug.cgi?id=99578#c13">Comment # 13</a> on <a class="bz_bug_link bz_status_NEEDINFO " title="NEEDINFO - [SKL][bisected] Screen regularly returns from power save mode" href="https://bugs.freedesktop.org/show_bug.cgi?id=99578">bug 99578</a> from <a class="email" href="mailto:ps@pks.im" title="Patrick Steinhardt <ps@pks.im>"> Patrick Steinhardt</a> <pre>No, I use `i915/skl_dmc_ver1_26.bin`. I retrieve the file via the linux-firmware package from Gentoo. Most of the other firmware files are filtered, so the following files remain: ``` /lib/firmware/ /lib/firmware/iwlwifi-7265D-21.ucode /lib/firmware/i915 /lib/firmware/i915/skl_guc_ver6_1.bin /lib/firmware/i915/skl_guc_ver6.bin /lib/firmware/i915/skl_dmc_ver1.bin /lib/firmware/i915/skl_dmc_ver1_26.bin /lib/firmware/i915/skl_guc_ver4.bin ``` As the firmware is provided by the distribution and I compile it directly into the kernel via `CONFIG_EXTRA_FIRMWARE`, I do not run any additional scripts to have them updated (besides re-compiling the kernel on changed firmware, obviously). Just to avoid any misunderstandings: the error loading `skl_dmc_ver1_26.bin` was only caused by directly trying to load `i915/skl_dmc_ver1.bin` instead of `i915/skl_dmc_ver1_26.bin`, as was proposed by Elio. Otherwise, the firmware file loads correctly.</pre> </div> <hr> You are receiving this mail because: <ul> <li>You are on the CC list for the bug.</li> <li>You are the assignee for the bug.</li> <li>You are the QA Contact for the bug.</li> </ul> </body> </html>