<html> <head> <base href="https://bugs.freedesktop.org/"> </head> <body> <div> <a class="bz_bug_link bz_status_ASSIGNED " title="ASSIGNED - 12bpc deep color not supported by repeater" href="https://bugs.freedesktop.org/show_bug.cgi?id=99869#c10">Comment # 10</a> on <a class="bz_bug_link bz_status_ASSIGNED " title="ASSIGNED - 12bpc deep color not supported by repeater" href="https://bugs.freedesktop.org/show_bug.cgi?id=99869">bug 99869</a> from <a class="email" href="mailto:matt@matthoran.com" title="Matt Horan <matt@matthoran.com>"> Matt Horan</a> <pre>(In reply to Tomeu Vizoso from <a href="show_bug.cgi?id=99869#c9">comment #9</a>) > Reducing the priority to medium because there's a workaround that restores > the previous behavior (replacing the edid with > drm_kms_helper.edid_firmware), and my understanding is that the Highest > priority is reserved for regressions that don't have a known workaround. Same behavior either way, and identical EDID. I have seen similar behavior to what you're describing with audio, however. I sometimes have to power cycle the receiver, TV, or both, to get audio to play from the receiver. Also, when I shut off the TV just to listen to music from my PC, audio stops completely. Turning the TV back on, then off again resolves the issue. This receiver has had many quirks since the beginning, and I'm amazed that any proprietary devices work with it at all. I appreciate your efforts in looking at this, though -- as I realize this is a pretty specific set of circumstances!</pre> </div> <hr> You are receiving this mail because: <ul> <li>You are the QA Contact for the bug.</li> <li>You are on the CC list for the bug.</li> </ul> </body> </html>