<html> <head> <base href="https://bugs.freedesktop.org/"> </head> <body> <div> <a class="bz_bug_link bz_status_NEW " title="NEW - [CI] igt@kms* - dmesg-warn - *ERROR* Failed to read TMDS config: -6 &| *ERROR* Set TMDS ratio failed &| *ERROR* [CONNECTOR:101:HDMI-A-1] Failed to configure sink scrambling/TMDS bit clock ratio" href="https://bugs.freedesktop.org/show_bug.cgi?id=105644#c9">Comment # 9</a> on <a class="bz_bug_link bz_status_NEW " title="NEW - [CI] igt@kms* - dmesg-warn - *ERROR* Failed to read TMDS config: -6 &| *ERROR* Set TMDS ratio failed &| *ERROR* [CONNECTOR:101:HDMI-A-1] Failed to configure sink scrambling/TMDS bit clock ratio" href="https://bugs.freedesktop.org/show_bug.cgi?id=105644">bug 105644</a> from <a class="email" href="mailto:marta.lofstedt@intel.com" title="Marta Löfstedt <marta.lofstedt@intel.com>"> Marta Löfstedt</a> <pre>From IRC: <marta_> tsa, drmtip_7 has 549 issues, it is basically the fi-glk-j4005 dmesg-warn: <marta_> <marta_> [ 108.873403] [drm:drm_scdc_set_high_tmds_clock_ratio] *ERROR* Failed to read TMDS config: -6 <marta_> [ 108.900365] [drm:drm_scdc_set_high_tmds_clock_ratio] *ERROR* Failed to read TMDS config: -6 <marta_> [ 108.900422] [drm:intel_enable_ddi [i915]] *ERROR* [CONNECTOR:101:HDMI-A-1] Failed to configure sink scrambling/TMDS bit clock ratio * Notify: jsaa is online (Ubuntu Servers (freenode)) * jsaa (~<a href="mailto:jsaa@134.134.139.76">jsaa@134.134.139.76</a>) has joined <tsa> marta_: ahah :) so hdmi2.0 again? <tsa> CI back to testing <mupuf> tsa, marta_ we started looking into that with vsyrjala and imre on Friday. We tried rebooting the screen <tsa> oh pooh, that hdmi issue makes the html much larger -SaslServ- <Unknown user (via SASL):165.176.37.188.rev.vodafone.pt> failed to login to marta. There have been 19 failed login attempts since your last successful login. <marta_> mupuf, tsa, vsyrjala see comments in: <a class="bz_bug_link bz_status_NEW " title="NEW - [CI] igt@kms* - dmesg-warn - *ERROR* Failed to read TMDS config: -6 &| *ERROR* Set TMDS ratio failed &| *ERROR* [CONNECTOR:101:HDMI-A-1] Failed to configure sink scrambling/TMDS bit clock ratio" href="show_bug.cgi?id=105644">https://bugs.freedesktop.org/show_bug.cgi?id=105644</a> <vsyrjala> so far my conclusion is that the display gets confused and stops responding to scdc <vsyrjala> maybe try connecting only one source to it and see if it fares any better <marta_> tsa, do we have any other option to get real HDMI 2.0 on HDMI 2.0 display? <marta_> tsa, is that display on KVM? Is KVM HDMI 2.0? <tsa> marta_: no hdmi2.0 kvm here <tsa> marta_: we separated GLK to its own monitor (also hdmi 2.0), cnl is alone now on the old HDMI2.0 <tsa> real monitors both, we don't have HDMI2.0 dongles I think <tsa> vsyrjala too ^ <marta_> tsa, so then we could swap the HDMI 2.0 monitors and check vsyrjala theory of broken display <tsa> yes, as soon as we get some results from this setup</pre> </div> <hr> You are receiving this mail because: <ul> <li>You are on the CC list for the bug.</li> <li>You are the QA Contact for the bug.</li> </ul> </body> </html>