<html> <head> <base href="https://bugs.freedesktop.org/"> </head> <body> <div> <a class="bz_bug_link bz_status_ASSIGNED " title="ASSIGNED - [GLK] no signal after switch resolution from 1080p@23.98" href="https://bugs.freedesktop.org/show_bug.cgi?id=105887#c108">Comment # 108</a> on <a class="bz_bug_link bz_status_ASSIGNED " title="ASSIGNED - [GLK] no signal after switch resolution from 1080p@23.98" href="https://bugs.freedesktop.org/show_bug.cgi?id=105887">bug 105887</a> from <a class="email" href="mailto:clinton.a.taylor@intel.com" title="Clinton Taylor <clinton.a.taylor@intel.com>"> Clinton Taylor</a> <pre>> Thanks for the updated patch. Though, this iteration brings the issue back > at least during boot when i915.ko is loaded: My J5005-ITX prints it's boot > messages after powering on the system. Then, when i915 first initialises the > hardware and switches the FB to 1080p50 (forced via > "video=HDMI-A-1:1920x1080@50" on the kernel command line), I get the "No > signal" problem. Shortly after, when X and Kodi are started, the picture > returns due to some "xset" commands that are run. From within Kodi, playing > a 23.976p movie and stopping (thus switching to 1080p50 again), picture > remains and there are no more issues. Maybe the connector check causes the > initial issue here? Thanks for the test. Glad we found this early. Let me see what other connector type checks I need to add. My guess is INTEL_OUTPUT_UNUSED for the first boot issue.</pre> </div> <hr> You are receiving this mail because: <ul> <li>You are the QA Contact for the bug.</li> <li>You are on the CC list for the bug.</li> </ul> </body> </html>