<html> <head> <base href="https://bugs.freedesktop.org/"> </head> <body> <div> <a class="bz_bug_link bz_status_NEEDINFO " title="NEEDINFO - Link layer compliance doesn't passes on WHL" href="https://bugs.freedesktop.org/show_bug.cgi?id=109296#c4">Comment # 4</a> on <a class="bz_bug_link bz_status_NEEDINFO " title="NEEDINFO - Link layer compliance doesn't passes on WHL" href="https://bugs.freedesktop.org/show_bug.cgi?id=109296">bug 109296</a> from <a class="email" href="mailto:nathan.d.ciobanu@linux.intel.com" title="nathan.d.ciobanu@linux.intel.com">nathan.d.ciobanu@linux.intel.com</a> <pre>Created <a href="attachment.cgi?id=143216" name="attach_143216" title="Test report of WHL board">attachment 143216</a> <a href="attachment.cgi?id=143216&action=edit" title="Test report of WHL board">[details]</a> Test report of WHL board Test on an identical WHL board as reported originally resulted in 7 failures. We believe the original test results reported here in "143063: Link layer test result." were caused by a bad test setup (DRM master was probably not released before test was started). Since we know there are many hardware differences between the WHL board DUT and WHL RVP reference board we will next retest with drm-tip on the WHL DUT and depending on the results we will share further details.</pre> </div> <hr> You are receiving this mail because: <ul> <li>You are on the CC list for the bug.</li> <li>You are the QA Contact for the bug.</li> </ul> </body> </html>