<html> <head> <base href="https://bugs.freedesktop.org/"> </head> <body> <div> <a class="bz_bug_link bz_status_ASSIGNED " title="ASSIGNED - [SLK] Screen freezes with PSR enabled" href="https://bugs.freedesktop.org/show_bug.cgi?id=111088#c11">Comment # 11</a> on <a class="bz_bug_link bz_status_ASSIGNED " title="ASSIGNED - [SLK] Screen freezes with PSR enabled" href="https://bugs.freedesktop.org/show_bug.cgi?id=111088">bug 111088</a> from <a class="email" href="mailto:kubrick@fgv6.net" title="François Guerraz <kubrick@fgv6.net>"> François Guerraz</a> <pre>In case that's still helpful: # cat /sys/kernel/debug/dri/0/i915_display_info CRTC info --------- CRTC 48: pipe: A, active=yes, (size=3200x1800), dither=no, bpp=24 fb: 87, pos: 0x0, size: 3200x1800 encoder 85: type: DDI A, connectors: connector 86: type: eDP-1, status: connected, mode: "3200x1800": 60 373250 3200 3248 3280 3360 1800 1803 1808 1852 0x48 0xa cursor visible? yes, position (450, 1196), size 256x256, addr 0x077c0000 num_scalers=2, scaler_users=0 scaler_id=-1, scalers[0]: use=no, mode=0, scalers[1]: use=no, mode=0 --Plane id 31: type=PRI, crtc_pos= 0x 0, crtc_size=3200x1800, src_pos=0.0000x0.0000, src_size=3200.0000x1800.0000, format=XR24 little-endian (0x34325258), rotation=0 (0x00000001) --Plane id 38: type=OVL, crtc_pos= 0x 0, crtc_size= 0x 0, src_pos=0.0000x0.0000, src_size=0.0000x0.0000, format=N/A, rotation=0 (0x00000001) --Plane id 45: type=CUR, crtc_pos= 450x1196, crtc_size= 256x 256, src_pos=0.0000x0.0000, src_size=256.0000x256.0000, format=AR24 little-endian (0x34325241), rotation=0 (0x00000001) underrun reporting: cpu=yes pch=yes CRTC 66: pipe: B, active=no, (size=1920x1080), dither=no, bpp=24 underrun reporting: cpu=yes pch=yes CRTC 84: pipe: C, active=no, (size=0x0), dither=no, bpp=0 underrun reporting: cpu=yes pch=yes Connector info -------------- connector 86: type eDP-1, status: connected physical dimensions: 290x170mm subpixel order: Unknown CEA rev: 0 DPCD rev: 12 audio support: no fixed mode: "3200x1800": 60 373250 3200 3248 3280 3360 1800 1803 1808 1852 0x48 0xa DP branch device present: no modes: "3200x1800": 60 373250 3200 3248 3280 3360 1800 1803 1808 1852 0x48 0xa "3200x1800": 48 298600 3200 3248 3280 3360 1800 1803 1808 1852 0x40 0xa connector 92: type DP-1, status: disconnected connector 99: type HDMI-A-1, status: disconnected connector 105: type DP-2, status: disconnected connector 110: type HDMI-A-2, status: disconnected # cat /sys/kernel/debug/dri/0/i915_edp_psr_status Sink support: yes [0x01] PSR mode: PSR1 enabled Source PSR ctl: enabled [0x81f00626] Source PSR status: IDLE [0x04050006] Busy frontbuffer bits: 0x00000000 # cat /sys/kernel/debug/dri/0/i915_dmc_info fw loaded: yes path: i915/skl_dmc_ver1_27.bin version: 1.27 DC3 -> DC5 count: 6 DC5 -> DC6 count: 0 program base: 0x09004040 ssp base: 0x00002fc0 htp: 0x00b40068 # cat /sys/kernel/debug/dri/0/eDP-1/i915_psr_sink_status Sink PSR status: 0x2 [active, display from RFB]</pre> </div> <hr> You are receiving this mail because: <ul> <li>You are on the CC list for the bug.</li> <li>You are the QA Contact for the bug.</li> </ul> </body> </html>