[PATCH 2/4] drm/i915: Deduplicate PPS register retrieval
Imre Deak
imre.deak at intel.com
Wed Jun 22 15:34:11 UTC 2016
No functional change.
Signed-off-by: Imre Deak <imre.deak at intel.com>
---
drivers/gpu/drm/i915/intel_dp.c | 131 ++++++++++++++++++++--------------------
1 file changed, 65 insertions(+), 66 deletions(-)
diff --git a/drivers/gpu/drm/i915/intel_dp.c b/drivers/gpu/drm/i915/intel_dp.c
index 35aab72..866d037 100644
--- a/drivers/gpu/drm/i915/intel_dp.c
+++ b/drivers/gpu/drm/i915/intel_dp.c
@@ -571,30 +571,64 @@ void intel_power_sequencer_reset(struct drm_i915_private *dev_priv)
}
}
+struct pps_registers {
+ i915_reg_t pp_ctrl;
+ i915_reg_t pp_stat;
+ i915_reg_t pp_on;
+ i915_reg_t pp_off;
+ i915_reg_t pp_div;
+};
+
+static void intel_pps_get_registers(struct drm_i915_private *dev_priv,
+ struct intel_dp *intel_dp,
+ struct pps_registers *regs)
+{
+ memset(regs, 0, sizeof(*regs));
+
+ if (IS_BROXTON(dev_priv)) {
+ int idx = bxt_power_sequencer_idx(intel_dp);
+
+ regs->pp_ctrl = BXT_PP_CONTROL(idx);
+ regs->pp_stat = BXT_PP_STATUS(idx);
+ regs->pp_on = BXT_PP_ON_DELAYS(idx);
+ regs->pp_off = BXT_PP_OFF_DELAYS(idx);
+ } else if (HAS_PCH_SPLIT(dev_priv)) {
+ regs->pp_ctrl = PCH_PP_CONTROL;
+ regs->pp_stat = PCH_PP_STATUS;
+ regs->pp_on = PCH_PP_ON_DELAYS;
+ regs->pp_off = PCH_PP_OFF_DELAYS;
+ regs->pp_div = PCH_PP_DIVISOR;
+ } else {
+ enum pipe pipe = vlv_power_sequencer_pipe(intel_dp);
+
+ regs->pp_ctrl = VLV_PIPE_PP_CONTROL(pipe);
+ regs->pp_stat = VLV_PIPE_PP_STATUS(pipe);
+ regs->pp_on = VLV_PIPE_PP_ON_DELAYS(pipe);
+ regs->pp_off = VLV_PIPE_PP_OFF_DELAYS(pipe);
+ regs->pp_div = VLV_PIPE_PP_DIVISOR(pipe);
+ }
+}
+
static i915_reg_t
_pp_ctrl_reg(struct intel_dp *intel_dp)
{
- struct drm_device *dev = intel_dp_to_dev(intel_dp);
+ struct pps_registers regs;
- if (IS_BROXTON(dev))
- return BXT_PP_CONTROL(bxt_power_sequencer_idx(intel_dp));
- else if (HAS_PCH_SPLIT(dev))
- return PCH_PP_CONTROL;
- else
- return VLV_PIPE_PP_CONTROL(vlv_power_sequencer_pipe(intel_dp));
+ intel_pps_get_registers(to_i915(intel_dp_to_dev(intel_dp)), intel_dp,
+ ®s);
+
+ return regs.pp_ctrl;
}
static i915_reg_t
_pp_stat_reg(struct intel_dp *intel_dp)
{
- struct drm_device *dev = intel_dp_to_dev(intel_dp);
+ struct pps_registers regs;
- if (IS_BROXTON(dev))
- return BXT_PP_STATUS(bxt_power_sequencer_idx(intel_dp));
- else if (HAS_PCH_SPLIT(dev))
- return PCH_PP_STATUS;
- else
- return VLV_PIPE_PP_STATUS(vlv_power_sequencer_pipe(intel_dp));
+ intel_pps_get_registers(to_i915(intel_dp_to_dev(intel_dp)), intel_dp,
+ ®s);
+
+ return regs.pp_stat;
}
/* Reboot notifier handler to shutdown panel power to guarantee T12 timing
@@ -4746,7 +4780,7 @@ intel_dp_init_panel_power_sequencer(struct drm_device *dev,
struct edp_power_seq cur, vbt, spec,
*final = &intel_dp->pps_delays;
u32 pp_on, pp_off, pp_div = 0, pp_ctl = 0;
- i915_reg_t pp_ctrl_reg, pp_on_reg, pp_off_reg, pp_div_reg;
+ struct pps_registers regs;
lockdep_assert_held(&dev_priv->pps_mutex);
@@ -4754,35 +4788,17 @@ intel_dp_init_panel_power_sequencer(struct drm_device *dev,
if (final->t11_t12 != 0)
return;
- if (IS_BROXTON(dev)) {
- int idx = bxt_power_sequencer_idx(intel_dp);
-
- pp_ctrl_reg = BXT_PP_CONTROL(idx);
- pp_on_reg = BXT_PP_ON_DELAYS(idx);
- pp_off_reg = BXT_PP_OFF_DELAYS(idx);
- } else if (HAS_PCH_SPLIT(dev)) {
- pp_ctrl_reg = PCH_PP_CONTROL;
- pp_on_reg = PCH_PP_ON_DELAYS;
- pp_off_reg = PCH_PP_OFF_DELAYS;
- pp_div_reg = PCH_PP_DIVISOR;
- } else {
- enum pipe pipe = vlv_power_sequencer_pipe(intel_dp);
-
- pp_ctrl_reg = VLV_PIPE_PP_CONTROL(pipe);
- pp_on_reg = VLV_PIPE_PP_ON_DELAYS(pipe);
- pp_off_reg = VLV_PIPE_PP_OFF_DELAYS(pipe);
- pp_div_reg = VLV_PIPE_PP_DIVISOR(pipe);
- }
+ intel_pps_get_registers(dev_priv, intel_dp, ®s);
/* Workaround: Need to write PP_CONTROL with the unlock key as
* the very first thing. */
pp_ctl = ironlake_get_pp_control(intel_dp);
- pp_on = I915_READ(pp_on_reg);
- pp_off = I915_READ(pp_off_reg);
+ pp_on = I915_READ(regs.pp_on);
+ pp_off = I915_READ(regs.pp_off);
if (!IS_BROXTON(dev)) {
- I915_WRITE(pp_ctrl_reg, pp_ctl);
- pp_div = I915_READ(pp_div_reg);
+ I915_WRITE(regs.pp_ctrl, pp_ctl);
+ pp_div = I915_READ(regs.pp_div);
}
/* Pull timing values out of registers */
@@ -4865,30 +4881,13 @@ intel_dp_init_panel_power_sequencer_registers(struct drm_device *dev,
struct drm_i915_private *dev_priv = dev->dev_private;
u32 pp_on, pp_off, pp_div, port_sel = 0;
int div = dev_priv->rawclk_freq / 1000;
- i915_reg_t pp_on_reg, pp_off_reg, pp_div_reg, pp_ctrl_reg;
+ struct pps_registers regs;
enum port port = dp_to_dig_port(intel_dp)->port;
const struct edp_power_seq *seq = &intel_dp->pps_delays;
lockdep_assert_held(&dev_priv->pps_mutex);
- if (IS_BROXTON(dev)) {
- int idx = bxt_power_sequencer_idx(intel_dp);
-
- pp_ctrl_reg = BXT_PP_CONTROL(idx);
- pp_on_reg = BXT_PP_ON_DELAYS(idx);
- pp_off_reg = BXT_PP_OFF_DELAYS(idx);
-
- } else if (HAS_PCH_SPLIT(dev)) {
- pp_on_reg = PCH_PP_ON_DELAYS;
- pp_off_reg = PCH_PP_OFF_DELAYS;
- pp_div_reg = PCH_PP_DIVISOR;
- } else {
- enum pipe pipe = vlv_power_sequencer_pipe(intel_dp);
-
- pp_on_reg = VLV_PIPE_PP_ON_DELAYS(pipe);
- pp_off_reg = VLV_PIPE_PP_OFF_DELAYS(pipe);
- pp_div_reg = VLV_PIPE_PP_DIVISOR(pipe);
- }
+ intel_pps_get_registers(dev_priv, intel_dp, ®s);
/*
* And finally store the new values in the power sequencer. The
@@ -4905,7 +4904,7 @@ intel_dp_init_panel_power_sequencer_registers(struct drm_device *dev,
/* Compute the divisor for the pp clock, simply match the Bspec
* formula. */
if (IS_BROXTON(dev)) {
- pp_div = I915_READ(pp_ctrl_reg);
+ pp_div = I915_READ(regs.pp_ctrl);
pp_div &= ~BXT_POWER_CYCLE_DELAY_MASK;
pp_div |= (DIV_ROUND_UP((seq->t11_t12 + 1), 1000)
<< BXT_POWER_CYCLE_DELAY_SHIFT);
@@ -4928,19 +4927,19 @@ intel_dp_init_panel_power_sequencer_registers(struct drm_device *dev,
pp_on |= port_sel;
- I915_WRITE(pp_on_reg, pp_on);
- I915_WRITE(pp_off_reg, pp_off);
+ I915_WRITE(regs.pp_on, pp_on);
+ I915_WRITE(regs.pp_off, pp_off);
if (IS_BROXTON(dev))
- I915_WRITE(pp_ctrl_reg, pp_div);
+ I915_WRITE(regs.pp_ctrl, pp_div);
else
- I915_WRITE(pp_div_reg, pp_div);
+ I915_WRITE(regs.pp_div, pp_div);
DRM_DEBUG_KMS("panel power sequencer register settings: PP_ON %#x, PP_OFF %#x, PP_DIV %#x\n",
- I915_READ(pp_on_reg),
- I915_READ(pp_off_reg),
+ I915_READ(regs.pp_on),
+ I915_READ(regs.pp_off),
IS_BROXTON(dev) ?
- (I915_READ(pp_ctrl_reg) & BXT_POWER_CYCLE_DELAY_MASK) :
- I915_READ(pp_div_reg));
+ (I915_READ(regs.pp_ctrl) & BXT_POWER_CYCLE_DELAY_MASK) :
+ I915_READ(regs.pp_div));
}
/**
--
2.5.0
More information about the Intel-gfx-trybot
mailing list