[PATCH 11/13] drm/i915: Consolidate legacy semaphore initialization
Tvrtko Ursulin
tvrtko.ursulin at linux.intel.com
Fri Jun 24 13:01:11 UTC 2016
From: Tvrtko Ursulin <tvrtko.ursulin at intel.com>
Replace per-engine initialization with a common half-programatic,
half-data driven code for ease of maintenance and compactness.
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin at intel.com>
---
drivers/gpu/drm/i915/intel_ringbuffer.c | 110 ++++++++++++++------------------
1 file changed, 48 insertions(+), 62 deletions(-)
diff --git a/drivers/gpu/drm/i915/intel_ringbuffer.c b/drivers/gpu/drm/i915/intel_ringbuffer.c
index b59eafce125c..309dc7bebabc 100644
--- a/drivers/gpu/drm/i915/intel_ringbuffer.c
+++ b/drivers/gpu/drm/i915/intel_ringbuffer.c
@@ -2834,6 +2834,54 @@ static void intel_ring_init_semaphores(struct intel_engine_cs *engine)
} else if (INTEL_GEN(dev_priv) >= 6) {
engine->semaphore.sync_to = gen6_ring_sync;
engine->semaphore.signal = gen6_signal;
+
+ /*
+ * The current semaphore is only applied on pre-gen8
+ * platform. And there is no VCS2 ring on the pre-gen8
+ * platform. So the semaphore between RCS and VCS2 is
+ * initialized as INVALID. Gen8 will initialize the
+ * sema between VCS2 and RCS later.
+ */
+ for (i = 0; i < I915_NUM_ENGINES; i++) {
+ static const struct {
+ u32 wait_mbox;
+ i915_reg_t mbox_reg;
+ } sem_data[I915_NUM_ENGINES][I915_NUM_ENGINES] = {
+ [RCS] = {
+ [VCS] = { .wait_mbox = MI_SEMAPHORE_SYNC_RV, .mbox_reg = GEN6_VRSYNC },
+ [BCS] = { .wait_mbox = MI_SEMAPHORE_SYNC_RB, .mbox_reg = GEN6_BRSYNC },
+ [VECS] = { .wait_mbox = MI_SEMAPHORE_SYNC_RVE, .mbox_reg = GEN6_VERSYNC },
+ },
+ [VCS] = {
+ [RCS] = { .wait_mbox = MI_SEMAPHORE_SYNC_VR, .mbox_reg = GEN6_RVSYNC },
+ [BCS] = { .wait_mbox = MI_SEMAPHORE_SYNC_VB, .mbox_reg = GEN6_BVSYNC },
+ [VECS] = { .wait_mbox = MI_SEMAPHORE_SYNC_VVE, .mbox_reg = GEN6_VEVSYNC },
+ },
+ [BCS] = {
+ [RCS] = { .wait_mbox = MI_SEMAPHORE_SYNC_BR, .mbox_reg = GEN6_RBSYNC },
+ [VCS] = { .wait_mbox = MI_SEMAPHORE_SYNC_BV, .mbox_reg = GEN6_VBSYNC },
+ [VECS] = { .wait_mbox = MI_SEMAPHORE_SYNC_BVE, .mbox_reg = GEN6_VEBSYNC },
+ },
+ [VECS] = {
+ [RCS] = { .wait_mbox = MI_SEMAPHORE_SYNC_VER, .mbox_reg = GEN6_RVESYNC },
+ [VCS] = { .wait_mbox = MI_SEMAPHORE_SYNC_VEV, .mbox_reg = GEN6_VVESYNC },
+ [BCS] = { .wait_mbox = MI_SEMAPHORE_SYNC_VEB, .mbox_reg = GEN6_BVESYNC },
+ },
+ };
+ u32 wait_mbox;
+ i915_reg_t mbox_reg;
+
+ if (i == engine->id || i == VCS2) {
+ wait_mbox = MI_SEMAPHORE_SYNC_INVALID;
+ mbox_reg = GEN6_NOSYNC;
+ } else {
+ wait_mbox = sem_data[engine->id][i].wait_mbox;
+ mbox_reg = sem_data[engine->id][i].mbox_reg;
+ }
+
+ engine->semaphore.mbox.wait[i] = wait_mbox;
+ engine->semaphore.mbox.signal[i] = mbox_reg;
+ }
}
}
@@ -2924,25 +2972,6 @@ int intel_init_render_ring_buffer(struct drm_device *dev)
if (IS_GEN6(dev_priv))
engine->flush = gen6_render_ring_flush;
engine->irq_enable_mask = GT_RENDER_USER_INTERRUPT;
- if (i915_semaphore_is_enabled(dev_priv)) {
- /*
- * The current semaphore is only applied on pre-gen8
- * platform. And there is no VCS2 ring on the pre-gen8
- * platform. So the semaphore between RCS and VCS2 is
- * initialized as INVALID. Gen8 will initialize the
- * sema between VCS2 and RCS later.
- */
- engine->semaphore.mbox.wait[RCS] = MI_SEMAPHORE_SYNC_INVALID;
- engine->semaphore.mbox.wait[VCS] = MI_SEMAPHORE_SYNC_RV;
- engine->semaphore.mbox.wait[BCS] = MI_SEMAPHORE_SYNC_RB;
- engine->semaphore.mbox.wait[VECS] = MI_SEMAPHORE_SYNC_RVE;
- engine->semaphore.mbox.wait[VCS2] = MI_SEMAPHORE_SYNC_INVALID;
- engine->semaphore.mbox.signal[RCS] = GEN6_NOSYNC;
- engine->semaphore.mbox.signal[VCS] = GEN6_VRSYNC;
- engine->semaphore.mbox.signal[BCS] = GEN6_BRSYNC;
- engine->semaphore.mbox.signal[VECS] = GEN6_VERSYNC;
- engine->semaphore.mbox.signal[VCS2] = GEN6_NOSYNC;
- }
} else if (IS_GEN5(dev_priv)) {
engine->add_request = pc_render_add_request;
engine->flush = gen4_render_ring_flush;
@@ -3022,18 +3051,6 @@ int intel_init_bsd_ring_buffer(struct drm_device *dev)
GT_RENDER_USER_INTERRUPT << GEN8_VCS1_IRQ_SHIFT;
} else {
engine->irq_enable_mask = GT_BSD_USER_INTERRUPT;
- if (i915_semaphore_is_enabled(dev_priv)) {
- engine->semaphore.mbox.wait[RCS] = MI_SEMAPHORE_SYNC_VR;
- engine->semaphore.mbox.wait[VCS] = MI_SEMAPHORE_SYNC_INVALID;
- engine->semaphore.mbox.wait[BCS] = MI_SEMAPHORE_SYNC_VB;
- engine->semaphore.mbox.wait[VECS] = MI_SEMAPHORE_SYNC_VVE;
- engine->semaphore.mbox.wait[VCS2] = MI_SEMAPHORE_SYNC_INVALID;
- engine->semaphore.mbox.signal[RCS] = GEN6_RVSYNC;
- engine->semaphore.mbox.signal[VCS] = GEN6_NOSYNC;
- engine->semaphore.mbox.signal[BCS] = GEN6_BVSYNC;
- engine->semaphore.mbox.signal[VECS] = GEN6_VEVSYNC;
- engine->semaphore.mbox.signal[VCS2] = GEN6_NOSYNC;
- }
}
} else {
engine->mmio_base = BSD_RING_BASE;
@@ -3090,25 +3107,6 @@ int intel_init_blt_ring_buffer(struct drm_device *dev)
GT_RENDER_USER_INTERRUPT << GEN8_BCS_IRQ_SHIFT;
} else {
engine->irq_enable_mask = GT_BLT_USER_INTERRUPT;
- if (i915_semaphore_is_enabled(dev_priv)) {
- /*
- * The current semaphore is only applied on pre-gen8
- * platform. And there is no VCS2 ring on the pre-gen8
- * platform. So the semaphore between BCS and VCS2 is
- * initialized as INVALID. Gen8 will initialize the
- * sema between BCS and VCS2 later.
- */
- engine->semaphore.mbox.wait[RCS] = MI_SEMAPHORE_SYNC_BR;
- engine->semaphore.mbox.wait[VCS] = MI_SEMAPHORE_SYNC_BV;
- engine->semaphore.mbox.wait[BCS] = MI_SEMAPHORE_SYNC_INVALID;
- engine->semaphore.mbox.wait[VECS] = MI_SEMAPHORE_SYNC_BVE;
- engine->semaphore.mbox.wait[VCS2] = MI_SEMAPHORE_SYNC_INVALID;
- engine->semaphore.mbox.signal[RCS] = GEN6_RBSYNC;
- engine->semaphore.mbox.signal[VCS] = GEN6_VBSYNC;
- engine->semaphore.mbox.signal[BCS] = GEN6_NOSYNC;
- engine->semaphore.mbox.signal[VECS] = GEN6_VEBSYNC;
- engine->semaphore.mbox.signal[VCS2] = GEN6_NOSYNC;
- }
}
return intel_init_ring_buffer(dev, engine);
@@ -3136,18 +3134,6 @@ int intel_init_vebox_ring_buffer(struct drm_device *dev)
engine->irq_enable_mask = PM_VEBOX_USER_INTERRUPT;
engine->irq_get = hsw_vebox_get_irq;
engine->irq_put = hsw_vebox_put_irq;
- if (i915_semaphore_is_enabled(dev_priv)) {
- engine->semaphore.mbox.wait[RCS] = MI_SEMAPHORE_SYNC_VER;
- engine->semaphore.mbox.wait[VCS] = MI_SEMAPHORE_SYNC_VEV;
- engine->semaphore.mbox.wait[BCS] = MI_SEMAPHORE_SYNC_VEB;
- engine->semaphore.mbox.wait[VECS] = MI_SEMAPHORE_SYNC_INVALID;
- engine->semaphore.mbox.wait[VCS2] = MI_SEMAPHORE_SYNC_INVALID;
- engine->semaphore.mbox.signal[RCS] = GEN6_RVESYNC;
- engine->semaphore.mbox.signal[VCS] = GEN6_VVESYNC;
- engine->semaphore.mbox.signal[BCS] = GEN6_BVESYNC;
- engine->semaphore.mbox.signal[VECS] = GEN6_NOSYNC;
- engine->semaphore.mbox.signal[VCS2] = GEN6_NOSYNC;
- }
}
return intel_init_ring_buffer(dev, engine);
--
1.9.1
More information about the Intel-gfx-trybot
mailing list