[PATCH 05/18] drm/i915: Move dpio code of VLV/CHV dpll enabling to intel_dpio_phy.c
Ander Conselvan de Oliveira
ander.conselvan.de.oliveira at intel.com
Wed May 4 09:12:44 UTC 2016
Hide the dpio details of setting up the dplls on VLV/CHV to
intel_dpio_phy.c. This will allow the prepare and enable pll functions
to be merged in a follow up. It also creates a better split of the code
where most of the dpio access are concentrated in one place.
---
drivers/gpu/drm/i915/i915_drv.h | 6 +
drivers/gpu/drm/i915/intel_display.c | 207 ++--------------------------------
drivers/gpu/drm/i915/intel_dpio_phy.c | 202 +++++++++++++++++++++++++++++++++
3 files changed, 217 insertions(+), 198 deletions(-)
diff --git a/drivers/gpu/drm/i915/i915_drv.h b/drivers/gpu/drm/i915/i915_drv.h
index ff6aaf0..29d9946 100644
--- a/drivers/gpu/drm/i915/i915_drv.h
+++ b/drivers/gpu/drm/i915/i915_drv.h
@@ -3602,6 +3602,9 @@ void chv_phy_pre_pll_enable(struct intel_encoder *encoder);
void chv_phy_pre_encoder_enable(struct intel_encoder *encoder);
void chv_phy_release_cl2_override(struct intel_encoder *encoder);
void chv_phy_post_pll_disable(struct intel_encoder *encoder);
+void chv_phy_prepare_pll(struct intel_crtc *crtc, u32 bestn,
+ u32 bestm1, u32 bestm2, u32 bestp1, u32 bestp2,
+ int vco);
void vlv_set_phy_signal_level(struct intel_encoder *encoder,
u32 demph_reg_value, u32 preemph_reg_value,
@@ -3609,6 +3612,9 @@ void vlv_set_phy_signal_level(struct intel_encoder *encoder,
void vlv_phy_pre_pll_enable(struct intel_encoder *encoder);
void vlv_phy_pre_encoder_enable(struct intel_encoder *encoder);
void vlv_phy_reset_lanes(struct intel_encoder *encoder);
+void vlv_phy_prepare_pll(struct intel_crtc *crtc, u32 bestn,
+ u32 bestm1, u32 bestm2, u32 bestp1, u32 bestp2,
+ int port_clock, bool dp);
int intel_gpu_freq(struct drm_i915_private *dev_priv, int val);
int intel_freq_opcode(struct drm_i915_private *dev_priv, int val);
diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c
index a1e589e..c2f9b66 100644
--- a/drivers/gpu/drm/i915/intel_display.c
+++ b/drivers/gpu/drm/i915/intel_display.c
@@ -7085,35 +7085,6 @@ static void i9xx_update_pll_dividers(struct intel_crtc *crtc,
}
}
-static void vlv_pllb_recal_opamp(struct drm_i915_private *dev_priv, enum pipe
- pipe)
-{
- u32 reg_val;
-
- /*
- * PLLB opamp always calibrates to max value of 0x3f, force enable it
- * and set it to a reasonable value instead.
- */
- reg_val = vlv_dpio_read(dev_priv, pipe, VLV_PLL_DW9(1));
- reg_val &= 0xffffff00;
- reg_val |= 0x00000030;
- vlv_dpio_write(dev_priv, pipe, VLV_PLL_DW9(1), reg_val);
-
- reg_val = vlv_dpio_read(dev_priv, pipe, VLV_REF_DW13);
- reg_val &= 0x8cffffff;
- reg_val = 0x8c000000;
- vlv_dpio_write(dev_priv, pipe, VLV_REF_DW13, reg_val);
-
- reg_val = vlv_dpio_read(dev_priv, pipe, VLV_PLL_DW9(1));
- reg_val &= 0xffffff00;
- vlv_dpio_write(dev_priv, pipe, VLV_PLL_DW9(1), reg_val);
-
- reg_val = vlv_dpio_read(dev_priv, pipe, VLV_REF_DW13);
- reg_val &= 0x00ffffff;
- reg_val |= 0xb0000000;
- vlv_dpio_write(dev_priv, pipe, VLV_REF_DW13, reg_val);
-}
-
static void intel_pch_transcoder_set_m_n(struct intel_crtc *crtc,
struct intel_link_m_n *m_n)
{
@@ -7225,9 +7196,6 @@ static void vlv_prepare_pll(struct intel_crtc *crtc,
struct drm_device *dev = crtc->base.dev;
struct drm_i915_private *dev_priv = dev->dev_private;
enum pipe pipe = crtc->pipe;
- u32 mdiv;
- u32 bestn, bestm1, bestm2, bestp1, bestp2;
- u32 coreclk, reg_val;
/* Enable Refclk */
I915_WRITE(DPLL(pipe),
@@ -7238,85 +7206,12 @@ static void vlv_prepare_pll(struct intel_crtc *crtc,
if ((pipe_config->dpll_hw_state.dpll & DPLL_VCO_ENABLE) == 0)
return;
- mutex_lock(&dev_priv->sb_lock);
-
- bestn = pipe_config->dpll.n;
- bestm1 = pipe_config->dpll.m1;
- bestm2 = pipe_config->dpll.m2;
- bestp1 = pipe_config->dpll.p1;
- bestp2 = pipe_config->dpll.p2;
-
- /* See eDP HDMI DPIO driver vbios notes doc */
-
- /* PLL B needs special handling */
- if (pipe == PIPE_B)
- vlv_pllb_recal_opamp(dev_priv, pipe);
-
- /* Set up Tx target for periodic Rcomp update */
- vlv_dpio_write(dev_priv, pipe, VLV_PLL_DW9_BCAST, 0x0100000f);
+ vlv_phy_prepare_pll(crtc, pipe_config->dpll.n,
+ pipe_config->dpll.m1, pipe_config->dpll.m2,
+ pipe_config->dpll.p1, pipe_config->dpll.p2,
+ pipe_config->port_clock,
+ pipe_config->has_dp_encoder);
- /* Disable target IRef on PLL */
- reg_val = vlv_dpio_read(dev_priv, pipe, VLV_PLL_DW8(pipe));
- reg_val &= 0x00ffffff;
- vlv_dpio_write(dev_priv, pipe, VLV_PLL_DW8(pipe), reg_val);
-
- /* Disable fast lock */
- vlv_dpio_write(dev_priv, pipe, VLV_CMN_DW0, 0x610);
-
- /* Set idtafcrecal before PLL is enabled */
- mdiv = ((bestm1 << DPIO_M1DIV_SHIFT) | (bestm2 & DPIO_M2DIV_MASK));
- mdiv |= ((bestp1 << DPIO_P1_SHIFT) | (bestp2 << DPIO_P2_SHIFT));
- mdiv |= ((bestn << DPIO_N_SHIFT));
- mdiv |= (1 << DPIO_K_SHIFT);
-
- /*
- * Post divider depends on pixel clock rate, DAC vs digital (and LVDS,
- * but we don't support that).
- * Note: don't use the DAC post divider as it seems unstable.
- */
- mdiv |= (DPIO_POST_DIV_HDMIDP << DPIO_POST_DIV_SHIFT);
- vlv_dpio_write(dev_priv, pipe, VLV_PLL_DW3(pipe), mdiv);
-
- mdiv |= DPIO_ENABLE_CALIBRATION;
- vlv_dpio_write(dev_priv, pipe, VLV_PLL_DW3(pipe), mdiv);
-
- /* Set HBR and RBR LPF coefficients */
- if (pipe_config->port_clock == 162000 ||
- intel_pipe_has_type(crtc, INTEL_OUTPUT_ANALOG) ||
- intel_pipe_has_type(crtc, INTEL_OUTPUT_HDMI))
- vlv_dpio_write(dev_priv, pipe, VLV_PLL_DW10(pipe),
- 0x009f0003);
- else
- vlv_dpio_write(dev_priv, pipe, VLV_PLL_DW10(pipe),
- 0x00d0000f);
-
- if (pipe_config->has_dp_encoder) {
- /* Use SSC source */
- if (pipe == PIPE_A)
- vlv_dpio_write(dev_priv, pipe, VLV_PLL_DW5(pipe),
- 0x0df40000);
- else
- vlv_dpio_write(dev_priv, pipe, VLV_PLL_DW5(pipe),
- 0x0df70000);
- } else { /* HDMI or VGA */
- /* Use bend source */
- if (pipe == PIPE_A)
- vlv_dpio_write(dev_priv, pipe, VLV_PLL_DW5(pipe),
- 0x0df70000);
- else
- vlv_dpio_write(dev_priv, pipe, VLV_PLL_DW5(pipe),
- 0x0df40000);
- }
-
- coreclk = vlv_dpio_read(dev_priv, pipe, VLV_PLL_DW7(pipe));
- coreclk = (coreclk & 0x0000ff00) | 0x01c00000;
- if (intel_pipe_has_type(crtc, INTEL_OUTPUT_DISPLAYPORT) ||
- intel_pipe_has_type(crtc, INTEL_OUTPUT_EDP))
- coreclk |= 0x01000000;
- vlv_dpio_write(dev_priv, pipe, VLV_PLL_DW7(pipe), coreclk);
-
- vlv_dpio_write(dev_priv, pipe, VLV_PLL_DW11(pipe), 0x87871000);
- mutex_unlock(&dev_priv->sb_lock);
}
static void chv_prepare_pll(struct intel_crtc *crtc,
@@ -7325,11 +7220,6 @@ static void chv_prepare_pll(struct intel_crtc *crtc,
struct drm_device *dev = crtc->base.dev;
struct drm_i915_private *dev_priv = dev->dev_private;
enum pipe pipe = crtc->pipe;
- enum dpio_channel port = vlv_pipe_to_channel(pipe);
- u32 loopfilter, tribuf_calcntr;
- u32 bestn, bestm1, bestm2, bestp1, bestp2, bestm2_frac;
- u32 dpio_val;
- int vco;
/* Enable Refclk and SSC */
I915_WRITE(DPLL(pipe),
@@ -7339,89 +7229,10 @@ static void chv_prepare_pll(struct intel_crtc *crtc,
if ((pipe_config->dpll_hw_state.dpll & DPLL_VCO_ENABLE) == 0)
return;
- bestn = pipe_config->dpll.n;
- bestm2_frac = pipe_config->dpll.m2 & 0x3fffff;
- bestm1 = pipe_config->dpll.m1;
- bestm2 = pipe_config->dpll.m2 >> 22;
- bestp1 = pipe_config->dpll.p1;
- bestp2 = pipe_config->dpll.p2;
- vco = pipe_config->dpll.vco;
- dpio_val = 0;
- loopfilter = 0;
-
- mutex_lock(&dev_priv->sb_lock);
-
- /* p1 and p2 divider */
- vlv_dpio_write(dev_priv, pipe, CHV_CMN_DW13(port),
- 5 << DPIO_CHV_S1_DIV_SHIFT |
- bestp1 << DPIO_CHV_P1_DIV_SHIFT |
- bestp2 << DPIO_CHV_P2_DIV_SHIFT |
- 1 << DPIO_CHV_K_DIV_SHIFT);
-
- /* Feedback post-divider - m2 */
- vlv_dpio_write(dev_priv, pipe, CHV_PLL_DW0(port), bestm2);
-
- /* Feedback refclk divider - n and m1 */
- vlv_dpio_write(dev_priv, pipe, CHV_PLL_DW1(port),
- DPIO_CHV_M1_DIV_BY_2 |
- 1 << DPIO_CHV_N_DIV_SHIFT);
-
- /* M2 fraction division */
- vlv_dpio_write(dev_priv, pipe, CHV_PLL_DW2(port), bestm2_frac);
-
- /* M2 fraction division enable */
- dpio_val = vlv_dpio_read(dev_priv, pipe, CHV_PLL_DW3(port));
- dpio_val &= ~(DPIO_CHV_FEEDFWD_GAIN_MASK | DPIO_CHV_FRAC_DIV_EN);
- dpio_val |= (2 << DPIO_CHV_FEEDFWD_GAIN_SHIFT);
- if (bestm2_frac)
- dpio_val |= DPIO_CHV_FRAC_DIV_EN;
- vlv_dpio_write(dev_priv, pipe, CHV_PLL_DW3(port), dpio_val);
-
- /* Program digital lock detect threshold */
- dpio_val = vlv_dpio_read(dev_priv, pipe, CHV_PLL_DW9(port));
- dpio_val &= ~(DPIO_CHV_INT_LOCK_THRESHOLD_MASK |
- DPIO_CHV_INT_LOCK_THRESHOLD_SEL_COARSE);
- dpio_val |= (0x5 << DPIO_CHV_INT_LOCK_THRESHOLD_SHIFT);
- if (!bestm2_frac)
- dpio_val |= DPIO_CHV_INT_LOCK_THRESHOLD_SEL_COARSE;
- vlv_dpio_write(dev_priv, pipe, CHV_PLL_DW9(port), dpio_val);
-
- /* Loop filter */
- if (vco == 5400000) {
- loopfilter |= (0x3 << DPIO_CHV_PROP_COEFF_SHIFT);
- loopfilter |= (0x8 << DPIO_CHV_INT_COEFF_SHIFT);
- loopfilter |= (0x1 << DPIO_CHV_GAIN_CTRL_SHIFT);
- tribuf_calcntr = 0x9;
- } else if (vco <= 6200000) {
- loopfilter |= (0x5 << DPIO_CHV_PROP_COEFF_SHIFT);
- loopfilter |= (0xB << DPIO_CHV_INT_COEFF_SHIFT);
- loopfilter |= (0x3 << DPIO_CHV_GAIN_CTRL_SHIFT);
- tribuf_calcntr = 0x9;
- } else if (vco <= 6480000) {
- loopfilter |= (0x4 << DPIO_CHV_PROP_COEFF_SHIFT);
- loopfilter |= (0x9 << DPIO_CHV_INT_COEFF_SHIFT);
- loopfilter |= (0x3 << DPIO_CHV_GAIN_CTRL_SHIFT);
- tribuf_calcntr = 0x8;
- } else {
- /* Not supported. Apply the same limits as in the max case */
- loopfilter |= (0x4 << DPIO_CHV_PROP_COEFF_SHIFT);
- loopfilter |= (0x9 << DPIO_CHV_INT_COEFF_SHIFT);
- loopfilter |= (0x3 << DPIO_CHV_GAIN_CTRL_SHIFT);
- tribuf_calcntr = 0;
- }
- vlv_dpio_write(dev_priv, pipe, CHV_PLL_DW6(port), loopfilter);
-
- dpio_val = vlv_dpio_read(dev_priv, pipe, CHV_PLL_DW8(port));
- dpio_val &= ~DPIO_CHV_TDC_TARGET_CNT_MASK;
- dpio_val |= (tribuf_calcntr << DPIO_CHV_TDC_TARGET_CNT_SHIFT);
- vlv_dpio_write(dev_priv, pipe, CHV_PLL_DW8(port), dpio_val);
-
- /* AFC Recal */
- vlv_dpio_write(dev_priv, pipe, CHV_CMN_DW14(port),
- vlv_dpio_read(dev_priv, pipe, CHV_CMN_DW14(port)) |
- DPIO_AFC_RECAL);
-
- mutex_unlock(&dev_priv->sb_lock);
+ chv_phy_prepare_pll(crtc, pipe_config->dpll.n,
+ pipe_config->dpll.m1, pipe_config->dpll.m2,
+ pipe_config->dpll.p1, pipe_config->dpll.p2,
+ pipe_config->dpll.vco);
}
/**
diff --git a/drivers/gpu/drm/i915/intel_dpio_phy.c b/drivers/gpu/drm/i915/intel_dpio_phy.c
index 288da35..fcadc92 100644
--- a/drivers/gpu/drm/i915/intel_dpio_phy.c
+++ b/drivers/gpu/drm/i915/intel_dpio_phy.c
@@ -370,6 +370,97 @@ void chv_phy_post_pll_disable(struct intel_encoder *encoder)
chv_phy_powergate_lanes(encoder, false, 0x0);
}
+void chv_phy_prepare_pll(struct intel_crtc *crtc, u32 bestn,
+ u32 bestm1, u32 bestm2, u32 bestp1, u32 bestp2,
+ int vco)
+{
+ struct drm_i915_private *dev_priv = to_i915(crtc->base.dev);
+ enum pipe pipe = crtc->pipe;
+ enum dpio_channel port = vlv_pipe_to_channel(pipe);
+ u32 loopfilter, tribuf_calcntr;
+ u32 bestm2_frac;
+ u32 dpio_val;
+
+ bestm2_frac = bestm2 & 0x3fffff;
+ bestm2 = bestm2 >> 22;
+ dpio_val = 0;
+ loopfilter = 0;
+
+ mutex_lock(&dev_priv->sb_lock);
+
+ /* p1 and p2 divider */
+ vlv_dpio_write(dev_priv, pipe, CHV_CMN_DW13(port),
+ 5 << DPIO_CHV_S1_DIV_SHIFT |
+ bestp1 << DPIO_CHV_P1_DIV_SHIFT |
+ bestp2 << DPIO_CHV_P2_DIV_SHIFT |
+ 1 << DPIO_CHV_K_DIV_SHIFT);
+
+ /* Feedback post-divider - m2 */
+ vlv_dpio_write(dev_priv, pipe, CHV_PLL_DW0(port), bestm2);
+
+ /* Feedback refclk divider - n and m1 */
+ vlv_dpio_write(dev_priv, pipe, CHV_PLL_DW1(port),
+ DPIO_CHV_M1_DIV_BY_2 |
+ 1 << DPIO_CHV_N_DIV_SHIFT);
+
+ /* M2 fraction division */
+ vlv_dpio_write(dev_priv, pipe, CHV_PLL_DW2(port), bestm2_frac);
+
+ /* M2 fraction division enable */
+ dpio_val = vlv_dpio_read(dev_priv, pipe, CHV_PLL_DW3(port));
+ dpio_val &= ~(DPIO_CHV_FEEDFWD_GAIN_MASK | DPIO_CHV_FRAC_DIV_EN);
+ dpio_val |= (2 << DPIO_CHV_FEEDFWD_GAIN_SHIFT);
+ if (bestm2_frac)
+ dpio_val |= DPIO_CHV_FRAC_DIV_EN;
+ vlv_dpio_write(dev_priv, pipe, CHV_PLL_DW3(port), dpio_val);
+
+ /* Program digital lock detect threshold */
+ dpio_val = vlv_dpio_read(dev_priv, pipe, CHV_PLL_DW9(port));
+ dpio_val &= ~(DPIO_CHV_INT_LOCK_THRESHOLD_MASK |
+ DPIO_CHV_INT_LOCK_THRESHOLD_SEL_COARSE);
+ dpio_val |= (0x5 << DPIO_CHV_INT_LOCK_THRESHOLD_SHIFT);
+ if (!bestm2_frac)
+ dpio_val |= DPIO_CHV_INT_LOCK_THRESHOLD_SEL_COARSE;
+ vlv_dpio_write(dev_priv, pipe, CHV_PLL_DW9(port), dpio_val);
+
+ /* Loop filter */
+ if (vco == 5400000) {
+ loopfilter |= (0x3 << DPIO_CHV_PROP_COEFF_SHIFT);
+ loopfilter |= (0x8 << DPIO_CHV_INT_COEFF_SHIFT);
+ loopfilter |= (0x1 << DPIO_CHV_GAIN_CTRL_SHIFT);
+ tribuf_calcntr = 0x9;
+ } else if (vco <= 6200000) {
+ loopfilter |= (0x5 << DPIO_CHV_PROP_COEFF_SHIFT);
+ loopfilter |= (0xB << DPIO_CHV_INT_COEFF_SHIFT);
+ loopfilter |= (0x3 << DPIO_CHV_GAIN_CTRL_SHIFT);
+ tribuf_calcntr = 0x9;
+ } else if (vco <= 6480000) {
+ loopfilter |= (0x4 << DPIO_CHV_PROP_COEFF_SHIFT);
+ loopfilter |= (0x9 << DPIO_CHV_INT_COEFF_SHIFT);
+ loopfilter |= (0x3 << DPIO_CHV_GAIN_CTRL_SHIFT);
+ tribuf_calcntr = 0x8;
+ } else {
+ /* Not supported. Apply the same limits as in the max case */
+ loopfilter |= (0x4 << DPIO_CHV_PROP_COEFF_SHIFT);
+ loopfilter |= (0x9 << DPIO_CHV_INT_COEFF_SHIFT);
+ loopfilter |= (0x3 << DPIO_CHV_GAIN_CTRL_SHIFT);
+ tribuf_calcntr = 0;
+ }
+ vlv_dpio_write(dev_priv, pipe, CHV_PLL_DW6(port), loopfilter);
+
+ dpio_val = vlv_dpio_read(dev_priv, pipe, CHV_PLL_DW8(port));
+ dpio_val &= ~DPIO_CHV_TDC_TARGET_CNT_MASK;
+ dpio_val |= (tribuf_calcntr << DPIO_CHV_TDC_TARGET_CNT_SHIFT);
+ vlv_dpio_write(dev_priv, pipe, CHV_PLL_DW8(port), dpio_val);
+
+ /* AFC Recal */
+ vlv_dpio_write(dev_priv, pipe, CHV_CMN_DW14(port),
+ vlv_dpio_read(dev_priv, pipe, CHV_CMN_DW14(port)) |
+ DPIO_AFC_RECAL);
+
+ mutex_unlock(&dev_priv->sb_lock);
+}
+
void vlv_set_phy_signal_level(struct intel_encoder *encoder,
u32 demph_reg_value, u32 preemph_reg_value,
u32 uniqtranscale_reg_value, u32 tx3_demph)
@@ -468,3 +559,114 @@ void vlv_phy_reset_lanes(struct intel_encoder *encoder)
vlv_dpio_write(dev_priv, pipe, VLV_PCS_DW1(port), 0x00e00060);
mutex_unlock(&dev_priv->sb_lock);
}
+
+static void vlv_pllb_recal_opamp(struct drm_i915_private *dev_priv,
+ enum pipe pipe)
+{
+ u32 reg_val;
+
+ /*
+ * PLLB opamp always calibrates to max value of 0x3f, force enable it
+ * and set it to a reasonable value instead.
+ */
+ reg_val = vlv_dpio_read(dev_priv, pipe, VLV_PLL_DW9(1));
+ reg_val &= 0xffffff00;
+ reg_val |= 0x00000030;
+ vlv_dpio_write(dev_priv, pipe, VLV_PLL_DW9(1), reg_val);
+
+ reg_val = vlv_dpio_read(dev_priv, pipe, VLV_REF_DW13);
+ reg_val &= 0x8cffffff;
+ reg_val = 0x8c000000;
+ vlv_dpio_write(dev_priv, pipe, VLV_REF_DW13, reg_val);
+
+ reg_val = vlv_dpio_read(dev_priv, pipe, VLV_PLL_DW9(1));
+ reg_val &= 0xffffff00;
+ vlv_dpio_write(dev_priv, pipe, VLV_PLL_DW9(1), reg_val);
+
+ reg_val = vlv_dpio_read(dev_priv, pipe, VLV_REF_DW13);
+ reg_val &= 0x00ffffff;
+ reg_val |= 0xb0000000;
+ vlv_dpio_write(dev_priv, pipe, VLV_REF_DW13, reg_val);
+}
+
+void vlv_phy_prepare_pll(struct intel_crtc *crtc, u32 bestn,
+ u32 bestm1, u32 bestm2, u32 bestp1, u32 bestp2,
+ int port_clock, bool dp)
+{
+ struct drm_i915_private *dev_priv = to_i915(crtc->base.dev);
+ int pipe = crtc->pipe;
+ u32 mdiv;
+ u32 coreclk, reg_val;
+
+ mutex_lock(&dev_priv->sb_lock);
+
+ /* See eDP HDMI DPIO driver vbios notes doc */
+
+ /* PLL B needs special handling */
+ if (pipe == PIPE_B)
+ vlv_pllb_recal_opamp(dev_priv, pipe);
+
+ /* Set up Tx target for periodic Rcomp update */
+ vlv_dpio_write(dev_priv, pipe, VLV_PLL_DW9_BCAST, 0x0100000f);
+
+ /* Disable target IRef on PLL */
+ reg_val = vlv_dpio_read(dev_priv, pipe, VLV_PLL_DW8(pipe));
+ reg_val &= 0x00ffffff;
+ vlv_dpio_write(dev_priv, pipe, VLV_PLL_DW8(pipe), reg_val);
+
+ /* Disable fast lock */
+ vlv_dpio_write(dev_priv, pipe, VLV_CMN_DW0, 0x610);
+
+ /* Set idtafcrecal before PLL is enabled */
+ mdiv = ((bestm1 << DPIO_M1DIV_SHIFT) | (bestm2 & DPIO_M2DIV_MASK));
+ mdiv |= ((bestp1 << DPIO_P1_SHIFT) | (bestp2 << DPIO_P2_SHIFT));
+ mdiv |= ((bestn << DPIO_N_SHIFT));
+ mdiv |= (1 << DPIO_K_SHIFT);
+
+ /*
+ * Post divider depends on pixel clock rate, DAC vs digital (and LVDS,
+ * but we don't support that).
+ * Note: don't use the DAC post divider as it seems unstable.
+ */
+ mdiv |= (DPIO_POST_DIV_HDMIDP << DPIO_POST_DIV_SHIFT);
+ vlv_dpio_write(dev_priv, pipe, VLV_PLL_DW3(pipe), mdiv);
+
+ mdiv |= DPIO_ENABLE_CALIBRATION;
+ vlv_dpio_write(dev_priv, pipe, VLV_PLL_DW3(pipe), mdiv);
+
+ /* Set HBR and RBR LPF coefficients */
+ if (port_clock == 162000 || !dp)
+ vlv_dpio_write(dev_priv, pipe, VLV_PLL_DW10(pipe),
+ 0x009f0003);
+ else
+ vlv_dpio_write(dev_priv, pipe, VLV_PLL_DW10(pipe),
+ 0x00d0000f);
+
+ if (dp) {
+ /* Use SSC source */
+ if (pipe == PIPE_A)
+ vlv_dpio_write(dev_priv, pipe, VLV_PLL_DW5(pipe),
+ 0x0df40000);
+ else
+ vlv_dpio_write(dev_priv, pipe, VLV_PLL_DW5(pipe),
+ 0x0df70000);
+ } else { /* HDMI or VGA */
+ /* Use bend source */
+ if (pipe == PIPE_A)
+ vlv_dpio_write(dev_priv, pipe, VLV_PLL_DW5(pipe),
+ 0x0df70000);
+ else
+ vlv_dpio_write(dev_priv, pipe, VLV_PLL_DW5(pipe),
+ 0x0df40000);
+ }
+
+ coreclk = vlv_dpio_read(dev_priv, pipe, VLV_PLL_DW7(pipe));
+ coreclk = (coreclk & 0x0000ff00) | 0x01c00000;
+ if (intel_pipe_has_type(crtc, INTEL_OUTPUT_DISPLAYPORT) ||
+ intel_pipe_has_type(crtc, INTEL_OUTPUT_EDP))
+ coreclk |= 0x01000000;
+ vlv_dpio_write(dev_priv, pipe, VLV_PLL_DW7(pipe), coreclk);
+
+ vlv_dpio_write(dev_priv, pipe, VLV_PLL_DW11(pipe), 0x87871000);
+ mutex_unlock(&dev_priv->sb_lock);
+}
--
2.4.11
More information about the Intel-gfx-trybot
mailing list