[PATCH 09/11] drm/i915: Merge i915_dma.c into i915_drv.c

Chris Wilson chris at chris-wilson.co.uk
Fri May 27 13:32:57 UTC 2016


i915_dma.c used to contain the DRI1/UMS horror show, but now all that
remains are the out-of-place driver level interfaces (such as
allocating, initialising and registering the driver). These should be in
i915_drv.c alongside similar routines for suspend/resume.

Signed-off-by: Chris Wilson <chris at chris-wilson.co.uk>
Cc: Daniel Vetter <daniel.vetter at ffwll.ch>
---
 drivers/gpu/drm/i915/Makefile   |    3 -
 drivers/gpu/drm/i915/i915_dma.c | 1680 --------------------------------
 drivers/gpu/drm/i915/i915_drv.c | 2026 +++++++++++++++++++++++++++++++++++----
 drivers/gpu/drm/i915/i915_drv.h |   16 +-
 4 files changed, 1837 insertions(+), 1888 deletions(-)
 delete mode 100644 drivers/gpu/drm/i915/i915_dma.c

diff --git a/drivers/gpu/drm/i915/Makefile b/drivers/gpu/drm/i915/Makefile
index 7e2944406b8f..2ea7c245923e 100644
--- a/drivers/gpu/drm/i915/Makefile
+++ b/drivers/gpu/drm/i915/Makefile
@@ -101,9 +101,6 @@ i915-y += dvo_ch7017.o \
 # virtual gpu code
 i915-y += i915_vgpu.o
 
-# legacy horrors
-i915-y += i915_dma.o
-
 obj-$(CONFIG_DRM_I915)  += i915.o
 
 CFLAGS_i915_trace_points.o := -I$(src)
diff --git a/drivers/gpu/drm/i915/i915_dma.c b/drivers/gpu/drm/i915/i915_dma.c
deleted file mode 100644
index 0ec785d4505e..000000000000
--- a/drivers/gpu/drm/i915/i915_dma.c
+++ /dev/null
@@ -1,1680 +0,0 @@
-/* i915_dma.c -- DMA support for the I915 -*- linux-c -*-
- */
-/*
- * Copyright 2003 Tungsten Graphics, Inc., Cedar Park, Texas.
- * All Rights Reserved.
- *
- * Permission is hereby granted, free of charge, to any person obtaining a
- * copy of this software and associated documentation files (the
- * "Software"), to deal in the Software without restriction, including
- * without limitation the rights to use, copy, modify, merge, publish,
- * distribute, sub license, and/or sell copies of the Software, and to
- * permit persons to whom the Software is furnished to do so, subject to
- * the following conditions:
- *
- * The above copyright notice and this permission notice (including the
- * next paragraph) shall be included in all copies or substantial portions
- * of the Software.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS
- * OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
- * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT.
- * IN NO EVENT SHALL TUNGSTEN GRAPHICS AND/OR ITS SUPPLIERS BE LIABLE FOR
- * ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT,
- * TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE
- * SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
- *
- */
-
-#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
-
-#include <drm/drmP.h>
-#include <drm/drm_crtc_helper.h>
-#include <drm/drm_fb_helper.h>
-#include <drm/drm_legacy.h>
-#include "intel_drv.h"
-#include <drm/i915_drm.h>
-#include "i915_drv.h"
-#include "i915_vgpu.h"
-#include "i915_trace.h"
-#include <linux/pci.h>
-#include <linux/console.h>
-#include <linux/vt.h>
-#include <linux/vgaarb.h>
-#include <linux/acpi.h>
-#include <linux/pnp.h>
-#include <linux/vga_switcheroo.h>
-#include <linux/slab.h>
-#include <acpi/video.h>
-#include <linux/pm.h>
-#include <linux/pm_runtime.h>
-#include <linux/oom.h>
-
-static unsigned int i915_load_fail_count;
-
-bool __i915_inject_load_failure(const char *func, int line)
-{
-	if (i915_load_fail_count >= i915.inject_load_failure)
-		return false;
-
-	if (++i915_load_fail_count == i915.inject_load_failure) {
-		DRM_INFO("Injecting failure at checkpoint %u [%s:%d]\n",
-			 i915.inject_load_failure, func, line);
-		return true;
-	}
-
-	return false;
-}
-
-#define FDO_BUG_URL "https://bugs.freedesktop.org/enter_bug.cgi?product=DRI"
-#define FDO_BUG_MSG "Please file a bug at " FDO_BUG_URL " against DRM/Intel " \
-		    "providing the dmesg log by booting with drm.debug=0xf"
-
-void
-__i915_printk(struct drm_i915_private *dev_priv, const char *level,
-	      const char *fmt, ...)
-{
-	static bool shown_bug_once;
-	struct device *dev = dev_priv->dev->dev;
-	bool is_error = level[1] <= KERN_ERR[1];
-	bool is_debug = level[1] == KERN_DEBUG[1];
-	struct va_format vaf;
-	va_list args;
-
-	if (is_debug && !(drm_debug & DRM_UT_DRIVER))
-		return;
-
-	va_start(args, fmt);
-
-	vaf.fmt = fmt;
-	vaf.va = &args;
-
-	dev_printk(level, dev, "[" DRM_NAME ":%ps] %pV",
-		   __builtin_return_address(0), &vaf);
-
-	if (is_error && !shown_bug_once) {
-		dev_notice(dev, "%s", FDO_BUG_MSG);
-		shown_bug_once = true;
-	}
-
-	va_end(args);
-}
-
-static bool i915_error_injected(struct drm_i915_private *dev_priv)
-{
-	return i915.inject_load_failure &&
-	       i915_load_fail_count == i915.inject_load_failure;
-}
-
-#define i915_load_error(dev_priv, fmt, ...)				     \
-	__i915_printk(dev_priv,						     \
-		      i915_error_injected(dev_priv) ? KERN_DEBUG : KERN_ERR, \
-		      fmt, ##__VA_ARGS__)
-
-static int i915_getparam(struct drm_device *dev, void *data,
-			 struct drm_file *file_priv)
-{
-	struct drm_i915_private *dev_priv = dev->dev_private;
-	drm_i915_getparam_t *param = data;
-	int value;
-
-	switch (param->param) {
-	case I915_PARAM_IRQ_ACTIVE:
-	case I915_PARAM_ALLOW_BATCHBUFFER:
-	case I915_PARAM_LAST_DISPATCH:
-		/* Reject all old ums/dri params. */
-		return -ENODEV;
-	case I915_PARAM_CHIPSET_ID:
-		value = dev->pdev->device;
-		break;
-	case I915_PARAM_REVISION:
-		value = dev->pdev->revision;
-		break;
-	case I915_PARAM_HAS_GEM:
-		value = 1;
-		break;
-	case I915_PARAM_NUM_FENCES_AVAIL:
-		value = dev_priv->num_fence_regs;
-		break;
-	case I915_PARAM_HAS_OVERLAY:
-		value = dev_priv->overlay ? 1 : 0;
-		break;
-	case I915_PARAM_HAS_PAGEFLIPPING:
-		value = 1;
-		break;
-	case I915_PARAM_HAS_EXECBUF2:
-		/* depends on GEM */
-		value = 1;
-		break;
-	case I915_PARAM_HAS_BSD:
-		value = intel_engine_initialized(&dev_priv->engine[VCS]);
-		break;
-	case I915_PARAM_HAS_BLT:
-		value = intel_engine_initialized(&dev_priv->engine[BCS]);
-		break;
-	case I915_PARAM_HAS_VEBOX:
-		value = intel_engine_initialized(&dev_priv->engine[VECS]);
-		break;
-	case I915_PARAM_HAS_BSD2:
-		value = intel_engine_initialized(&dev_priv->engine[VCS2]);
-		break;
-	case I915_PARAM_HAS_RELAXED_FENCING:
-		value = 1;
-		break;
-	case I915_PARAM_HAS_COHERENT_RINGS:
-		value = 1;
-		break;
-	case I915_PARAM_HAS_EXEC_CONSTANTS:
-		value = INTEL_INFO(dev)->gen >= 4;
-		break;
-	case I915_PARAM_HAS_RELAXED_DELTA:
-		value = 1;
-		break;
-	case I915_PARAM_HAS_GEN7_SOL_RESET:
-		value = 1;
-		break;
-	case I915_PARAM_HAS_LLC:
-		value = HAS_LLC(dev);
-		break;
-	case I915_PARAM_HAS_WT:
-		value = HAS_WT(dev);
-		break;
-	case I915_PARAM_HAS_ALIASING_PPGTT:
-		value = USES_PPGTT(dev);
-		break;
-	case I915_PARAM_HAS_WAIT_TIMEOUT:
-		value = 1;
-		break;
-	case I915_PARAM_HAS_SEMAPHORES:
-		value = i915_semaphore_is_enabled(dev_priv);
-		break;
-	case I915_PARAM_HAS_PRIME_VMAP_FLUSH:
-		value = 1;
-		break;
-	case I915_PARAM_HAS_SECURE_BATCHES:
-		value = capable(CAP_SYS_ADMIN);
-		break;
-	case I915_PARAM_HAS_PINNED_BATCHES:
-		value = 1;
-		break;
-	case I915_PARAM_HAS_EXEC_NO_RELOC:
-		value = 1;
-		break;
-	case I915_PARAM_HAS_EXEC_HANDLE_LUT:
-		value = 1;
-		break;
-	case I915_PARAM_CMD_PARSER_VERSION:
-		value = i915_cmd_parser_get_version(dev_priv);
-		break;
-	case I915_PARAM_HAS_COHERENT_PHYS_GTT:
-		value = 1;
-		break;
-	case I915_PARAM_MMAP_VERSION:
-		value = 1;
-		break;
-	case I915_PARAM_SUBSLICE_TOTAL:
-		value = INTEL_INFO(dev)->subslice_total;
-		if (!value)
-			return -ENODEV;
-		break;
-	case I915_PARAM_EU_TOTAL:
-		value = INTEL_INFO(dev)->eu_total;
-		if (!value)
-			return -ENODEV;
-		break;
-	case I915_PARAM_HAS_GPU_RESET:
-		value = i915.enable_hangcheck && intel_has_gpu_reset(dev_priv);
-		break;
-	case I915_PARAM_HAS_RESOURCE_STREAMER:
-		value = HAS_RESOURCE_STREAMER(dev);
-		break;
-	case I915_PARAM_HAS_EXEC_SOFTPIN:
-		value = 1;
-		break;
-	default:
-		DRM_DEBUG("Unknown parameter %d\n", param->param);
-		return -EINVAL;
-	}
-
-	if (copy_to_user(param->value, &value, sizeof(int))) {
-		DRM_ERROR("copy_to_user failed\n");
-		return -EFAULT;
-	}
-
-	return 0;
-}
-
-static int i915_get_bridge_dev(struct drm_device *dev)
-{
-	struct drm_i915_private *dev_priv = dev->dev_private;
-
-	dev_priv->bridge_dev = pci_get_bus_and_slot(0, PCI_DEVFN(0, 0));
-	if (!dev_priv->bridge_dev) {
-		DRM_ERROR("bridge device not found\n");
-		return -1;
-	}
-	return 0;
-}
-
-/* Allocate space for the MCH regs if needed, return nonzero on error */
-static int
-intel_alloc_mchbar_resource(struct drm_device *dev)
-{
-	struct drm_i915_private *dev_priv = dev->dev_private;
-	int reg = INTEL_INFO(dev)->gen >= 4 ? MCHBAR_I965 : MCHBAR_I915;
-	u32 temp_lo, temp_hi = 0;
-	u64 mchbar_addr;
-	int ret;
-
-	if (INTEL_INFO(dev)->gen >= 4)
-		pci_read_config_dword(dev_priv->bridge_dev, reg + 4, &temp_hi);
-	pci_read_config_dword(dev_priv->bridge_dev, reg, &temp_lo);
-	mchbar_addr = ((u64)temp_hi << 32) | temp_lo;
-
-	/* If ACPI doesn't have it, assume we need to allocate it ourselves */
-#ifdef CONFIG_PNP
-	if (mchbar_addr &&
-	    pnp_range_reserved(mchbar_addr, mchbar_addr + MCHBAR_SIZE))
-		return 0;
-#endif
-
-	/* Get some space for it */
-	dev_priv->mch_res.name = "i915 MCHBAR";
-	dev_priv->mch_res.flags = IORESOURCE_MEM;
-	ret = pci_bus_alloc_resource(dev_priv->bridge_dev->bus,
-				     &dev_priv->mch_res,
-				     MCHBAR_SIZE, MCHBAR_SIZE,
-				     PCIBIOS_MIN_MEM,
-				     0, pcibios_align_resource,
-				     dev_priv->bridge_dev);
-	if (ret) {
-		DRM_DEBUG_DRIVER("failed bus alloc: %d\n", ret);
-		dev_priv->mch_res.start = 0;
-		return ret;
-	}
-
-	if (INTEL_INFO(dev)->gen >= 4)
-		pci_write_config_dword(dev_priv->bridge_dev, reg + 4,
-				       upper_32_bits(dev_priv->mch_res.start));
-
-	pci_write_config_dword(dev_priv->bridge_dev, reg,
-			       lower_32_bits(dev_priv->mch_res.start));
-	return 0;
-}
-
-/* Setup MCHBAR if possible, return true if we should disable it again */
-static void
-intel_setup_mchbar(struct drm_device *dev)
-{
-	struct drm_i915_private *dev_priv = dev->dev_private;
-	int mchbar_reg = INTEL_INFO(dev)->gen >= 4 ? MCHBAR_I965 : MCHBAR_I915;
-	u32 temp;
-	bool enabled;
-
-	if (IS_VALLEYVIEW(dev) || IS_CHERRYVIEW(dev))
-		return;
-
-	dev_priv->mchbar_need_disable = false;
-
-	if (IS_I915G(dev) || IS_I915GM(dev)) {
-		pci_read_config_dword(dev_priv->bridge_dev, DEVEN, &temp);
-		enabled = !!(temp & DEVEN_MCHBAR_EN);
-	} else {
-		pci_read_config_dword(dev_priv->bridge_dev, mchbar_reg, &temp);
-		enabled = temp & 1;
-	}
-
-	/* If it's already enabled, don't have to do anything */
-	if (enabled)
-		return;
-
-	if (intel_alloc_mchbar_resource(dev))
-		return;
-
-	dev_priv->mchbar_need_disable = true;
-
-	/* Space is allocated or reserved, so enable it. */
-	if (IS_I915G(dev) || IS_I915GM(dev)) {
-		pci_write_config_dword(dev_priv->bridge_dev, DEVEN,
-				       temp | DEVEN_MCHBAR_EN);
-	} else {
-		pci_read_config_dword(dev_priv->bridge_dev, mchbar_reg, &temp);
-		pci_write_config_dword(dev_priv->bridge_dev, mchbar_reg, temp | 1);
-	}
-}
-
-static void
-intel_teardown_mchbar(struct drm_device *dev)
-{
-	struct drm_i915_private *dev_priv = dev->dev_private;
-	int mchbar_reg = INTEL_INFO(dev)->gen >= 4 ? MCHBAR_I965 : MCHBAR_I915;
-
-	if (dev_priv->mchbar_need_disable) {
-		if (IS_I915G(dev) || IS_I915GM(dev)) {
-			u32 deven_val;
-
-			pci_read_config_dword(dev_priv->bridge_dev, DEVEN,
-					      &deven_val);
-			deven_val &= ~DEVEN_MCHBAR_EN;
-			pci_write_config_dword(dev_priv->bridge_dev, DEVEN,
-					       deven_val);
-		} else {
-			u32 mchbar_val;
-
-			pci_read_config_dword(dev_priv->bridge_dev, mchbar_reg,
-					      &mchbar_val);
-			mchbar_val &= ~1;
-			pci_write_config_dword(dev_priv->bridge_dev, mchbar_reg,
-					       mchbar_val);
-		}
-	}
-
-	if (dev_priv->mch_res.start)
-		release_resource(&dev_priv->mch_res);
-}
-
-/* true = enable decode, false = disable decoder */
-static unsigned int i915_vga_set_decode(void *cookie, bool state)
-{
-	struct drm_device *dev = cookie;
-
-	intel_modeset_vga_set_state(dev, state);
-	if (state)
-		return VGA_RSRC_LEGACY_IO | VGA_RSRC_LEGACY_MEM |
-		       VGA_RSRC_NORMAL_IO | VGA_RSRC_NORMAL_MEM;
-	else
-		return VGA_RSRC_NORMAL_IO | VGA_RSRC_NORMAL_MEM;
-}
-
-static void i915_switcheroo_set_state(struct pci_dev *pdev, enum vga_switcheroo_state state)
-{
-	struct drm_device *dev = pci_get_drvdata(pdev);
-	pm_message_t pmm = { .event = PM_EVENT_SUSPEND };
-
-	if (state == VGA_SWITCHEROO_ON) {
-		pr_info("switched on\n");
-		dev->switch_power_state = DRM_SWITCH_POWER_CHANGING;
-		/* i915 resume handler doesn't set to D0 */
-		pci_set_power_state(dev->pdev, PCI_D0);
-		i915_resume_switcheroo(dev);
-		dev->switch_power_state = DRM_SWITCH_POWER_ON;
-	} else {
-		pr_info("switched off\n");
-		dev->switch_power_state = DRM_SWITCH_POWER_CHANGING;
-		i915_suspend_switcheroo(dev, pmm);
-		dev->switch_power_state = DRM_SWITCH_POWER_OFF;
-	}
-}
-
-static bool i915_switcheroo_can_switch(struct pci_dev *pdev)
-{
-	struct drm_device *dev = pci_get_drvdata(pdev);
-
-	/*
-	 * FIXME: open_count is protected by drm_global_mutex but that would lead to
-	 * locking inversion with the driver load path. And the access here is
-	 * completely racy anyway. So don't bother with locking for now.
-	 */
-	return dev->open_count == 0;
-}
-
-static const struct vga_switcheroo_client_ops i915_switcheroo_ops = {
-	.set_gpu_state = i915_switcheroo_set_state,
-	.reprobe = NULL,
-	.can_switch = i915_switcheroo_can_switch,
-};
-
-static void i915_gem_fini(struct drm_device *dev)
-{
-	struct drm_i915_private *dev_priv = to_i915(dev);
-
-	/*
-	 * Neither the BIOS, ourselves or any other kernel
-	 * expects the system to be in execlists mode on startup,
-	 * so we need to reset the GPU back to legacy mode. And the only
-	 * known way to disable logical contexts is through a GPU reset.
-	 *
-	 * So in order to leave the system in a known default configuration,
-	 * always reset the GPU upon unload. Afterwards we then clean up the
-	 * GEM state tracking, flushing off the requests and leaving the
-	 * system in a known idle state.
-	 *
-	 * Note that is of the upmost importance that the GPU is idle and
-	 * all stray writes are flushed *before* we dismantle the backing
-	 * storage for the pinned objects.
-	 *
-	 * However, since we are uncertain that reseting the GPU on older
-	 * machines is a good idea, we don't - just in case it leaves the
-	 * machine in an unusable condition.
-	 */
-	if (HAS_HW_CONTEXTS(dev)) {
-		int reset = intel_gpu_reset(dev_priv, ALL_ENGINES);
-		WARN_ON(reset && reset != -ENODEV);
-	}
-
-	mutex_lock(&dev->struct_mutex);
-	i915_gem_reset(dev);
-	i915_gem_cleanup_engines(dev);
-	i915_gem_context_fini(dev);
-	mutex_unlock(&dev->struct_mutex);
-
-	WARN_ON(!list_empty(&to_i915(dev)->context_list));
-}
-
-static int i915_load_modeset_init(struct drm_device *dev)
-{
-	struct drm_i915_private *dev_priv = dev->dev_private;
-	int ret;
-
-	if (i915_inject_load_failure())
-		return -ENODEV;
-
-	ret = intel_bios_init(dev_priv);
-	if (ret)
-		DRM_INFO("failed to find VBIOS tables\n");
-
-	/* If we have > 1 VGA cards, then we need to arbitrate access
-	 * to the common VGA resources.
-	 *
-	 * If we are a secondary display controller (!PCI_DISPLAY_CLASS_VGA),
-	 * then we do not take part in VGA arbitration and the
-	 * vga_client_register() fails with -ENODEV.
-	 */
-	ret = vga_client_register(dev->pdev, dev, NULL, i915_vga_set_decode);
-	if (ret && ret != -ENODEV)
-		goto out;
-
-	intel_register_dsm_handler();
-
-	ret = vga_switcheroo_register_client(dev->pdev, &i915_switcheroo_ops, false);
-	if (ret)
-		goto cleanup_vga_client;
-
-	/* must happen before intel_power_domains_init_hw() on VLV/CHV */
-	intel_update_rawclk(dev_priv);
-
-	intel_power_domains_init_hw(dev_priv, false);
-
-	intel_csr_ucode_init(dev_priv);
-
-	ret = intel_irq_install(dev_priv);
-	if (ret)
-		goto cleanup_csr;
-
-	intel_setup_gmbus(dev);
-
-	/* Important: The output setup functions called by modeset_init need
-	 * working irqs for e.g. gmbus and dp aux transfers. */
-	intel_modeset_init(dev);
-
-	intel_guc_init(dev);
-
-	ret = i915_gem_init(dev);
-	if (ret)
-		goto cleanup_irq;
-
-	intel_modeset_gem_init(dev);
-
-	if (INTEL_INFO(dev)->num_pipes == 0)
-		return 0;
-
-	ret = intel_fbdev_init(dev);
-	if (ret)
-		goto cleanup_gem;
-
-	/* Only enable hotplug handling once the fbdev is fully set up. */
-	intel_hpd_init(dev_priv);
-
-	drm_kms_helper_poll_init(dev);
-
-	return 0;
-
-cleanup_gem:
-	i915_gem_fini(dev);
-cleanup_irq:
-	intel_guc_fini(dev);
-	drm_irq_uninstall(dev);
-	intel_teardown_gmbus(dev);
-cleanup_csr:
-	intel_csr_ucode_fini(dev_priv);
-	intel_power_domains_fini(dev_priv);
-	vga_switcheroo_unregister_client(dev->pdev);
-cleanup_vga_client:
-	vga_client_register(dev->pdev, NULL, NULL, NULL);
-out:
-	return ret;
-}
-
-#if IS_ENABLED(CONFIG_FB)
-static int i915_kick_out_firmware_fb(struct drm_i915_private *dev_priv)
-{
-	struct apertures_struct *ap;
-	struct pci_dev *pdev = dev_priv->dev->pdev;
-	struct i915_ggtt *ggtt = &dev_priv->ggtt;
-	bool primary;
-	int ret;
-
-	ap = alloc_apertures(1);
-	if (!ap)
-		return -ENOMEM;
-
-	ap->ranges[0].base = ggtt->mappable_base;
-	ap->ranges[0].size = ggtt->mappable_end;
-
-	primary =
-		pdev->resource[PCI_ROM_RESOURCE].flags & IORESOURCE_ROM_SHADOW;
-
-	ret = remove_conflicting_framebuffers(ap, "inteldrmfb", primary);
-
-	kfree(ap);
-
-	return ret;
-}
-#else
-static int i915_kick_out_firmware_fb(struct drm_i915_private *dev_priv)
-{
-	return 0;
-}
-#endif
-
-#if !defined(CONFIG_VGA_CONSOLE)
-static int i915_kick_out_vgacon(struct drm_i915_private *dev_priv)
-{
-	return 0;
-}
-#elif !defined(CONFIG_DUMMY_CONSOLE)
-static int i915_kick_out_vgacon(struct drm_i915_private *dev_priv)
-{
-	return -ENODEV;
-}
-#else
-static int i915_kick_out_vgacon(struct drm_i915_private *dev_priv)
-{
-	int ret = 0;
-
-	DRM_INFO("Replacing VGA console driver\n");
-
-	console_lock();
-	if (con_is_bound(&vga_con))
-		ret = do_take_over_console(&dummy_con, 0, MAX_NR_CONSOLES - 1, 1);
-	if (ret == 0) {
-		ret = do_unregister_con_driver(&vga_con);
-
-		/* Ignore "already unregistered". */
-		if (ret == -ENODEV)
-			ret = 0;
-	}
-	console_unlock();
-
-	return ret;
-}
-#endif
-
-static void i915_dump_device_info(struct drm_i915_private *dev_priv)
-{
-	const struct intel_device_info *info = &dev_priv->info;
-
-#define PRINT_S(name) "%s"
-#define SEP_EMPTY
-#define PRINT_FLAG(name) info->name ? #name "," : ""
-#define SEP_COMMA ,
-	DRM_DEBUG_DRIVER("i915 device info: gen=%i, pciid=0x%04x rev=0x%02x flags="
-			 DEV_INFO_FOR_EACH_FLAG(PRINT_S, SEP_EMPTY),
-			 info->gen,
-			 dev_priv->dev->pdev->device,
-			 dev_priv->dev->pdev->revision,
-			 DEV_INFO_FOR_EACH_FLAG(PRINT_FLAG, SEP_COMMA));
-#undef PRINT_S
-#undef SEP_EMPTY
-#undef PRINT_FLAG
-#undef SEP_COMMA
-}
-
-static void cherryview_sseu_info_init(struct drm_device *dev)
-{
-	struct drm_i915_private *dev_priv = dev->dev_private;
-	struct intel_device_info *info;
-	u32 fuse, eu_dis;
-
-	info = (struct intel_device_info *)&dev_priv->info;
-	fuse = I915_READ(CHV_FUSE_GT);
-
-	info->slice_total = 1;
-
-	if (!(fuse & CHV_FGT_DISABLE_SS0)) {
-		info->subslice_per_slice++;
-		eu_dis = fuse & (CHV_FGT_EU_DIS_SS0_R0_MASK |
-				 CHV_FGT_EU_DIS_SS0_R1_MASK);
-		info->eu_total += 8 - hweight32(eu_dis);
-	}
-
-	if (!(fuse & CHV_FGT_DISABLE_SS1)) {
-		info->subslice_per_slice++;
-		eu_dis = fuse & (CHV_FGT_EU_DIS_SS1_R0_MASK |
-				 CHV_FGT_EU_DIS_SS1_R1_MASK);
-		info->eu_total += 8 - hweight32(eu_dis);
-	}
-
-	info->subslice_total = info->subslice_per_slice;
-	/*
-	 * CHV expected to always have a uniform distribution of EU
-	 * across subslices.
-	*/
-	info->eu_per_subslice = info->subslice_total ?
-				info->eu_total / info->subslice_total :
-				0;
-	/*
-	 * CHV supports subslice power gating on devices with more than
-	 * one subslice, and supports EU power gating on devices with
-	 * more than one EU pair per subslice.
-	*/
-	info->has_slice_pg = 0;
-	info->has_subslice_pg = (info->subslice_total > 1);
-	info->has_eu_pg = (info->eu_per_subslice > 2);
-}
-
-static void gen9_sseu_info_init(struct drm_device *dev)
-{
-	struct drm_i915_private *dev_priv = dev->dev_private;
-	struct intel_device_info *info;
-	int s_max = 3, ss_max = 4, eu_max = 8;
-	int s, ss;
-	u32 fuse2, s_enable, ss_disable, eu_disable;
-	u8 eu_mask = 0xff;
-
-	info = (struct intel_device_info *)&dev_priv->info;
-	fuse2 = I915_READ(GEN8_FUSE2);
-	s_enable = (fuse2 & GEN8_F2_S_ENA_MASK) >>
-		   GEN8_F2_S_ENA_SHIFT;
-	ss_disable = (fuse2 & GEN9_F2_SS_DIS_MASK) >>
-		     GEN9_F2_SS_DIS_SHIFT;
-
-	info->slice_total = hweight32(s_enable);
-	/*
-	 * The subslice disable field is global, i.e. it applies
-	 * to each of the enabled slices.
-	*/
-	info->subslice_per_slice = ss_max - hweight32(ss_disable);
-	info->subslice_total = info->slice_total *
-			       info->subslice_per_slice;
-
-	/*
-	 * Iterate through enabled slices and subslices to
-	 * count the total enabled EU.
-	*/
-	for (s = 0; s < s_max; s++) {
-		if (!(s_enable & (0x1 << s)))
-			/* skip disabled slice */
-			continue;
-
-		eu_disable = I915_READ(GEN9_EU_DISABLE(s));
-		for (ss = 0; ss < ss_max; ss++) {
-			int eu_per_ss;
-
-			if (ss_disable & (0x1 << ss))
-				/* skip disabled subslice */
-				continue;
-
-			eu_per_ss = eu_max - hweight8((eu_disable >> (ss*8)) &
-						      eu_mask);
-
-			/*
-			 * Record which subslice(s) has(have) 7 EUs. we
-			 * can tune the hash used to spread work among
-			 * subslices if they are unbalanced.
-			 */
-			if (eu_per_ss == 7)
-				info->subslice_7eu[s] |= 1 << ss;
-
-			info->eu_total += eu_per_ss;
-		}
-	}
-
-	/*
-	 * SKL is expected to always have a uniform distribution
-	 * of EU across subslices with the exception that any one
-	 * EU in any one subslice may be fused off for die
-	 * recovery. BXT is expected to be perfectly uniform in EU
-	 * distribution.
-	*/
-	info->eu_per_subslice = info->subslice_total ?
-				DIV_ROUND_UP(info->eu_total,
-					     info->subslice_total) : 0;
-	/*
-	 * SKL supports slice power gating on devices with more than
-	 * one slice, and supports EU power gating on devices with
-	 * more than one EU pair per subslice. BXT supports subslice
-	 * power gating on devices with more than one subslice, and
-	 * supports EU power gating on devices with more than one EU
-	 * pair per subslice.
-	*/
-	info->has_slice_pg = ((IS_SKYLAKE(dev) || IS_KABYLAKE(dev)) &&
-			       (info->slice_total > 1));
-	info->has_subslice_pg = (IS_BROXTON(dev) && (info->subslice_total > 1));
-	info->has_eu_pg = (info->eu_per_subslice > 2);
-}
-
-static void broadwell_sseu_info_init(struct drm_device *dev)
-{
-	struct drm_i915_private *dev_priv = dev->dev_private;
-	struct intel_device_info *info;
-	const int s_max = 3, ss_max = 3, eu_max = 8;
-	int s, ss;
-	u32 fuse2, eu_disable[s_max], s_enable, ss_disable;
-
-	fuse2 = I915_READ(GEN8_FUSE2);
-	s_enable = (fuse2 & GEN8_F2_S_ENA_MASK) >> GEN8_F2_S_ENA_SHIFT;
-	ss_disable = (fuse2 & GEN8_F2_SS_DIS_MASK) >> GEN8_F2_SS_DIS_SHIFT;
-
-	eu_disable[0] = I915_READ(GEN8_EU_DISABLE0) & GEN8_EU_DIS0_S0_MASK;
-	eu_disable[1] = (I915_READ(GEN8_EU_DISABLE0) >> GEN8_EU_DIS0_S1_SHIFT) |
-			((I915_READ(GEN8_EU_DISABLE1) & GEN8_EU_DIS1_S1_MASK) <<
-			 (32 - GEN8_EU_DIS0_S1_SHIFT));
-	eu_disable[2] = (I915_READ(GEN8_EU_DISABLE1) >> GEN8_EU_DIS1_S2_SHIFT) |
-			((I915_READ(GEN8_EU_DISABLE2) & GEN8_EU_DIS2_S2_MASK) <<
-			 (32 - GEN8_EU_DIS1_S2_SHIFT));
-
-
-	info = (struct intel_device_info *)&dev_priv->info;
-	info->slice_total = hweight32(s_enable);
-
-	/*
-	 * The subslice disable field is global, i.e. it applies
-	 * to each of the enabled slices.
-	 */
-	info->subslice_per_slice = ss_max - hweight32(ss_disable);
-	info->subslice_total = info->slice_total * info->subslice_per_slice;
-
-	/*
-	 * Iterate through enabled slices and subslices to
-	 * count the total enabled EU.
-	 */
-	for (s = 0; s < s_max; s++) {
-		if (!(s_enable & (0x1 << s)))
-			/* skip disabled slice */
-			continue;
-
-		for (ss = 0; ss < ss_max; ss++) {
-			u32 n_disabled;
-
-			if (ss_disable & (0x1 << ss))
-				/* skip disabled subslice */
-				continue;
-
-			n_disabled = hweight8(eu_disable[s] >> (ss * eu_max));
-
-			/*
-			 * Record which subslices have 7 EUs.
-			 */
-			if (eu_max - n_disabled == 7)
-				info->subslice_7eu[s] |= 1 << ss;
-
-			info->eu_total += eu_max - n_disabled;
-		}
-	}
-
-	/*
-	 * BDW is expected to always have a uniform distribution of EU across
-	 * subslices with the exception that any one EU in any one subslice may
-	 * be fused off for die recovery.
-	 */
-	info->eu_per_subslice = info->subslice_total ?
-		DIV_ROUND_UP(info->eu_total, info->subslice_total) : 0;
-
-	/*
-	 * BDW supports slice power gating on devices with more than
-	 * one slice.
-	 */
-	info->has_slice_pg = (info->slice_total > 1);
-	info->has_subslice_pg = 0;
-	info->has_eu_pg = 0;
-}
-
-/*
- * Determine various intel_device_info fields at runtime.
- *
- * Use it when either:
- *   - it's judged too laborious to fill n static structures with the limit
- *     when a simple if statement does the job,
- *   - run-time checks (eg read fuse/strap registers) are needed.
- *
- * This function needs to be called:
- *   - after the MMIO has been setup as we are reading registers,
- *   - after the PCH has been detected,
- *   - before the first usage of the fields it can tweak.
- */
-static void intel_device_info_runtime_init(struct drm_device *dev)
-{
-	struct drm_i915_private *dev_priv = dev->dev_private;
-	struct intel_device_info *info;
-	enum pipe pipe;
-
-	info = (struct intel_device_info *)&dev_priv->info;
-
-	/*
-	 * Skylake and Broxton currently don't expose the topmost plane as its
-	 * use is exclusive with the legacy cursor and we only want to expose
-	 * one of those, not both. Until we can safely expose the topmost plane
-	 * as a DRM_PLANE_TYPE_CURSOR with all the features exposed/supported,
-	 * we don't expose the topmost plane at all to prevent ABI breakage
-	 * down the line.
-	 */
-	if (IS_BROXTON(dev)) {
-		info->num_sprites[PIPE_A] = 2;
-		info->num_sprites[PIPE_B] = 2;
-		info->num_sprites[PIPE_C] = 1;
-	} else if (IS_VALLEYVIEW(dev) || IS_CHERRYVIEW(dev))
-		for_each_pipe(dev_priv, pipe)
-			info->num_sprites[pipe] = 2;
-	else
-		for_each_pipe(dev_priv, pipe)
-			info->num_sprites[pipe] = 1;
-
-	if (i915.disable_display) {
-		DRM_INFO("Display disabled (module parameter)\n");
-		info->num_pipes = 0;
-	} else if (info->num_pipes > 0 &&
-		   (IS_GEN7(dev_priv) || IS_GEN8(dev_priv)) &&
-		   HAS_PCH_SPLIT(dev)) {
-		u32 fuse_strap = I915_READ(FUSE_STRAP);
-		u32 sfuse_strap = I915_READ(SFUSE_STRAP);
-
-		/*
-		 * SFUSE_STRAP is supposed to have a bit signalling the display
-		 * is fused off. Unfortunately it seems that, at least in
-		 * certain cases, fused off display means that PCH display
-		 * reads don't land anywhere. In that case, we read 0s.
-		 *
-		 * On CPT/PPT, we can detect this case as SFUSE_STRAP_FUSE_LOCK
-		 * should be set when taking over after the firmware.
-		 */
-		if (fuse_strap & ILK_INTERNAL_DISPLAY_DISABLE ||
-		    sfuse_strap & SFUSE_STRAP_DISPLAY_DISABLED ||
-		    (dev_priv->pch_type == PCH_CPT &&
-		     !(sfuse_strap & SFUSE_STRAP_FUSE_LOCK))) {
-			DRM_INFO("Display fused off, disabling\n");
-			info->num_pipes = 0;
-		} else if (fuse_strap & IVB_PIPE_C_DISABLE) {
-			DRM_INFO("PipeC fused off\n");
-			info->num_pipes -= 1;
-		}
-	} else if (info->num_pipes > 0 && IS_GEN9(dev_priv)) {
-		u32 dfsm = I915_READ(SKL_DFSM);
-		u8 disabled_mask = 0;
-		bool invalid;
-		int num_bits;
-
-		if (dfsm & SKL_DFSM_PIPE_A_DISABLE)
-			disabled_mask |= BIT(PIPE_A);
-		if (dfsm & SKL_DFSM_PIPE_B_DISABLE)
-			disabled_mask |= BIT(PIPE_B);
-		if (dfsm & SKL_DFSM_PIPE_C_DISABLE)
-			disabled_mask |= BIT(PIPE_C);
-
-		num_bits = hweight8(disabled_mask);
-
-		switch (disabled_mask) {
-		case BIT(PIPE_A):
-		case BIT(PIPE_B):
-		case BIT(PIPE_A) | BIT(PIPE_B):
-		case BIT(PIPE_A) | BIT(PIPE_C):
-			invalid = true;
-			break;
-		default:
-			invalid = false;
-		}
-
-		if (num_bits > info->num_pipes || invalid)
-			DRM_ERROR("invalid pipe fuse configuration: 0x%x\n",
-				  disabled_mask);
-		else
-			info->num_pipes -= num_bits;
-	}
-
-	/* Initialize slice/subslice/EU info */
-	if (IS_CHERRYVIEW(dev))
-		cherryview_sseu_info_init(dev);
-	else if (IS_BROADWELL(dev))
-		broadwell_sseu_info_init(dev);
-	else if (INTEL_INFO(dev)->gen >= 9)
-		gen9_sseu_info_init(dev);
-
-	info->has_snoop = !info->has_llc;
-
-	/* Snooping is broken on BXT A stepping. */
-	if (IS_BXT_REVID(dev, 0, BXT_REVID_A1))
-		info->has_snoop = false;
-
-	DRM_DEBUG_DRIVER("slice total: %u\n", info->slice_total);
-	DRM_DEBUG_DRIVER("subslice total: %u\n", info->subslice_total);
-	DRM_DEBUG_DRIVER("subslice per slice: %u\n", info->subslice_per_slice);
-	DRM_DEBUG_DRIVER("EU total: %u\n", info->eu_total);
-	DRM_DEBUG_DRIVER("EU per subslice: %u\n", info->eu_per_subslice);
-	DRM_DEBUG_DRIVER("has slice power gating: %s\n",
-			 info->has_slice_pg ? "y" : "n");
-	DRM_DEBUG_DRIVER("has subslice power gating: %s\n",
-			 info->has_subslice_pg ? "y" : "n");
-	DRM_DEBUG_DRIVER("has EU power gating: %s\n",
-			 info->has_eu_pg ? "y" : "n");
-
-	i915.enable_execlists =
-		intel_sanitize_enable_execlists(dev_priv,
-					       	i915.enable_execlists);
-
-	/*
-	 * i915.enable_ppgtt is read-only, so do an early pass to validate the
-	 * user's requested state against the hardware/driver capabilities.  We
-	 * do this now so that we can print out any log messages once rather
-	 * than every time we check intel_enable_ppgtt().
-	 */
-	i915.enable_ppgtt =
-		intel_sanitize_enable_ppgtt(dev_priv, i915.enable_ppgtt);
-	DRM_DEBUG_DRIVER("ppgtt mode: %i\n", i915.enable_ppgtt);
-}
-
-static void intel_init_dpio(struct drm_i915_private *dev_priv)
-{
-	/*
-	 * IOSF_PORT_DPIO is used for VLV x2 PHY (DP/HDMI B and C),
-	 * CHV x1 PHY (DP/HDMI D)
-	 * IOSF_PORT_DPIO_2 is used for CHV x2 PHY (DP/HDMI B and C)
-	 */
-	if (IS_CHERRYVIEW(dev_priv)) {
-		DPIO_PHY_IOSF_PORT(DPIO_PHY0) = IOSF_PORT_DPIO_2;
-		DPIO_PHY_IOSF_PORT(DPIO_PHY1) = IOSF_PORT_DPIO;
-	} else if (IS_VALLEYVIEW(dev_priv)) {
-		DPIO_PHY_IOSF_PORT(DPIO_PHY0) = IOSF_PORT_DPIO;
-	}
-}
-
-static int i915_workqueues_init(struct drm_i915_private *dev_priv)
-{
-	/*
-	 * The i915 workqueue is primarily used for batched retirement of
-	 * requests (and thus managing bo) once the task has been completed
-	 * by the GPU. i915_gem_retire_requests() is called directly when we
-	 * need high-priority retirement, such as waiting for an explicit
-	 * bo.
-	 *
-	 * It is also used for periodic low-priority events, such as
-	 * idle-timers and recording error state.
-	 *
-	 * All tasks on the workqueue are expected to acquire the dev mutex
-	 * so there is no point in running more than one instance of the
-	 * workqueue at any time.  Use an ordered one.
-	 */
-	dev_priv->wq = alloc_ordered_workqueue("i915", 0);
-	if (dev_priv->wq == NULL)
-		goto out_err;
-
-	dev_priv->hotplug.dp_wq = alloc_ordered_workqueue("i915-dp", 0);
-	if (dev_priv->hotplug.dp_wq == NULL)
-		goto out_free_wq;
-
-	dev_priv->gpu_error.hangcheck_wq =
-		alloc_ordered_workqueue("i915-hangcheck", 0);
-	if (dev_priv->gpu_error.hangcheck_wq == NULL)
-		goto out_free_dp_wq;
-
-	return 0;
-
-out_free_dp_wq:
-	destroy_workqueue(dev_priv->hotplug.dp_wq);
-out_free_wq:
-	destroy_workqueue(dev_priv->wq);
-out_err:
-	DRM_ERROR("Failed to allocate workqueues.\n");
-
-	return -ENOMEM;
-}
-
-static void i915_workqueues_cleanup(struct drm_i915_private *dev_priv)
-{
-	destroy_workqueue(dev_priv->gpu_error.hangcheck_wq);
-	destroy_workqueue(dev_priv->hotplug.dp_wq);
-	destroy_workqueue(dev_priv->wq);
-}
-
-/**
- * i915_driver_init_early - setup state not requiring device access
- * @dev_priv: device private
- *
- * Initialize everything that is a "SW-only" state, that is state not
- * requiring accessing the device or exposing the driver via kernel internal
- * or userspace interfaces. Example steps belonging here: lock initialization,
- * system memory allocation, setting up device specific attributes and
- * function hooks not requiring accessing the device.
- */
-static int i915_driver_init_early(struct drm_i915_private *dev_priv,
-				  const struct pci_device_id *ent)
-{
-	const struct intel_device_info *match_info =
-		(struct intel_device_info *)ent->driver_data;
-	struct intel_device_info *device_info;
-	int ret = 0;
-
-	if (i915_inject_load_failure())
-		return -ENODEV;
-
-	/* Setup the write-once "constant" device info */
-	device_info = (struct intel_device_info *)&dev_priv->info;
-	memcpy(device_info, match_info, sizeof(*device_info));
-	device_info->device_id = dev_priv->drm.pdev->device;
-
-	BUG_ON(device_info->gen > sizeof(device_info->gen_mask) * BITS_PER_BYTE);
-	device_info->gen_mask = BIT(device_info->gen - 1);
-
-	spin_lock_init(&dev_priv->irq_lock);
-	spin_lock_init(&dev_priv->gpu_error.lock);
-	mutex_init(&dev_priv->backlight_lock);
-	spin_lock_init(&dev_priv->uncore.lock);
-	spin_lock_init(&dev_priv->mm.object_stat_lock);
-	spin_lock_init(&dev_priv->mmio_flip_lock);
-	mutex_init(&dev_priv->sb_lock);
-	mutex_init(&dev_priv->modeset_restore_lock);
-	mutex_init(&dev_priv->av_mutex);
-	mutex_init(&dev_priv->wm.wm_mutex);
-	mutex_init(&dev_priv->pps_mutex);
-
-	ret = i915_workqueues_init(dev_priv);
-	if (ret < 0)
-		return ret;
-
-	/* This must be called before any calls to HAS_PCH_* */
-	intel_detect_pch(&dev_priv->drm);
-
-	intel_pm_setup(&dev_priv->drm);
-	intel_init_dpio(dev_priv);
-	intel_power_domains_init(dev_priv);
-	intel_irq_init(dev_priv);
-	intel_init_display_hooks(dev_priv);
-	intel_init_clock_gating_hooks(dev_priv);
-	intel_init_audio_hooks(dev_priv);
-	i915_gem_load_init(&dev_priv->drm);
-
-	intel_display_crc_init(&dev_priv->drm);
-
-	i915_dump_device_info(dev_priv);
-
-	/* Not all pre-production machines fall into this category, only the
-	 * very first ones. Almost everything should work, except for maybe
-	 * suspend/resume. And we don't implement workarounds that affect only
-	 * pre-production machines. */
-	if (IS_HSW_EARLY_SDV(dev_priv))
-		DRM_INFO("This is an early pre-production Haswell machine. "
-			 "It may not be fully functional.\n");
-
-	return 0;
-}
-
-/**
- * i915_driver_cleanup_early - cleanup the setup done in i915_driver_init_early()
- * @dev_priv: device private
- */
-static void i915_driver_cleanup_early(struct drm_i915_private *dev_priv)
-{
-	i915_gem_load_cleanup(dev_priv->dev);
-	i915_workqueues_cleanup(dev_priv);
-}
-
-static int i915_mmio_setup(struct drm_device *dev)
-{
-	struct drm_i915_private *dev_priv = to_i915(dev);
-	int mmio_bar;
-	int mmio_size;
-
-	mmio_bar = IS_GEN2(dev) ? 1 : 0;
-	/*
-	 * Before gen4, the registers and the GTT are behind different BARs.
-	 * However, from gen4 onwards, the registers and the GTT are shared
-	 * in the same BAR, so we want to restrict this ioremap from
-	 * clobbering the GTT which we want ioremap_wc instead. Fortunately,
-	 * the register BAR remains the same size for all the earlier
-	 * generations up to Ironlake.
-	 */
-	if (INTEL_INFO(dev)->gen < 5)
-		mmio_size = 512 * 1024;
-	else
-		mmio_size = 2 * 1024 * 1024;
-	dev_priv->regs = pci_iomap(dev->pdev, mmio_bar, mmio_size);
-	if (dev_priv->regs == NULL) {
-		DRM_ERROR("failed to map registers\n");
-
-		return -EIO;
-	}
-
-	/* Try to make sure MCHBAR is enabled before poking at it */
-	intel_setup_mchbar(dev);
-
-	return 0;
-}
-
-static void i915_mmio_cleanup(struct drm_device *dev)
-{
-	struct drm_i915_private *dev_priv = to_i915(dev);
-
-	intel_teardown_mchbar(dev);
-	pci_iounmap(dev->pdev, dev_priv->regs);
-}
-
-/**
- * i915_driver_init_mmio - setup device MMIO
- * @dev_priv: device private
- *
- * Setup minimal device state necessary for MMIO accesses later in the
- * initialization sequence. The setup here should avoid any other device-wide
- * side effects or exposing the driver via kernel internal or user space
- * interfaces.
- */
-static int i915_driver_init_mmio(struct drm_i915_private *dev_priv)
-{
-	struct drm_device *dev = dev_priv->dev;
-	int ret;
-
-	if (i915_inject_load_failure())
-		return -ENODEV;
-
-	if (i915_get_bridge_dev(dev))
-		return -EIO;
-
-	ret = i915_mmio_setup(dev);
-	if (ret < 0)
-		goto put_bridge;
-
-	intel_uncore_init(dev_priv);
-
-	return 0;
-
-put_bridge:
-	pci_dev_put(dev_priv->bridge_dev);
-
-	return ret;
-}
-
-/**
- * i915_driver_cleanup_mmio - cleanup the setup done in i915_driver_init_mmio()
- * @dev_priv: device private
- */
-static void i915_driver_cleanup_mmio(struct drm_i915_private *dev_priv)
-{
-	struct drm_device *dev = dev_priv->dev;
-
-	intel_uncore_fini(dev_priv);
-	i915_mmio_cleanup(dev);
-	pci_dev_put(dev_priv->bridge_dev);
-}
-
-/**
- * i915_driver_init_hw - setup state requiring device access
- * @dev_priv: device private
- *
- * Setup state that requires accessing the device, but doesn't require
- * exposing the driver via kernel internal or userspace interfaces.
- */
-static int i915_driver_init_hw(struct drm_i915_private *dev_priv)
-{
-	struct drm_device *dev = dev_priv->dev;
-	struct i915_ggtt *ggtt = &dev_priv->ggtt;
-	uint32_t aperture_size;
-	int ret;
-
-	if (i915_inject_load_failure())
-		return -ENODEV;
-
-	intel_device_info_runtime_init(dev);
-
-	ret = i915_ggtt_init_hw(dev);
-	if (ret)
-		return ret;
-
-	ret = i915_ggtt_enable_hw(dev);
-	if (ret) {
-		DRM_ERROR("failed to enable GGTT\n");
-		goto out_ggtt;
-	}
-
-	/* WARNING: Apparently we must kick fbdev drivers before vgacon,
-	 * otherwise the vga fbdev driver falls over. */
-	ret = i915_kick_out_firmware_fb(dev_priv);
-	if (ret) {
-		DRM_ERROR("failed to remove conflicting framebuffer drivers\n");
-		goto out_ggtt;
-	}
-
-	ret = i915_kick_out_vgacon(dev_priv);
-	if (ret) {
-		DRM_ERROR("failed to remove conflicting VGA console\n");
-		goto out_ggtt;
-	}
-
-	pci_set_master(dev->pdev);
-
-	/* overlay on gen2 is broken and can't address above 1G */
-	if (IS_GEN2(dev)) {
-		ret = dma_set_coherent_mask(&dev->pdev->dev, DMA_BIT_MASK(30));
-		if (ret) {
-			DRM_ERROR("failed to set DMA mask\n");
-
-			goto out_ggtt;
-		}
-	}
-
-
-	/* 965GM sometimes incorrectly writes to hardware status page (HWS)
-	 * using 32bit addressing, overwriting memory if HWS is located
-	 * above 4GB.
-	 *
-	 * The documentation also mentions an issue with undefined
-	 * behaviour if any general state is accessed within a page above 4GB,
-	 * which also needs to be handled carefully.
-	 */
-	if (IS_BROADWATER(dev) || IS_CRESTLINE(dev)) {
-		ret = dma_set_coherent_mask(&dev->pdev->dev, DMA_BIT_MASK(32));
-
-		if (ret) {
-			DRM_ERROR("failed to set DMA mask\n");
-
-			goto out_ggtt;
-		}
-	}
-
-	aperture_size = ggtt->mappable_end;
-
-	ggtt->mappable =
-		io_mapping_create_wc(ggtt->mappable_base,
-				     aperture_size);
-	if (!ggtt->mappable) {
-		ret = -EIO;
-		goto out_ggtt;
-	}
-
-	ggtt->mtrr = arch_phys_wc_add(ggtt->mappable_base,
-					      aperture_size);
-
-	pm_qos_add_request(&dev_priv->pm_qos, PM_QOS_CPU_DMA_LATENCY,
-			   PM_QOS_DEFAULT_VALUE);
-
-	intel_uncore_sanitize(dev_priv);
-
-	intel_opregion_setup(dev_priv);
-
-	i915_gem_load_init_fences(dev_priv);
-
-	/* On the 945G/GM, the chipset reports the MSI capability on the
-	 * integrated graphics even though the support isn't actually there
-	 * according to the published specs.  It doesn't appear to function
-	 * correctly in testing on 945G.
-	 * This may be a side effect of MSI having been made available for PEG
-	 * and the registers being closely associated.
-	 *
-	 * According to chipset errata, on the 965GM, MSI interrupts may
-	 * be lost or delayed, but we use them anyways to avoid
-	 * stuck interrupts on some machines.
-	 */
-	if (!IS_I945G(dev) && !IS_I945GM(dev)) {
-		if (pci_enable_msi(dev->pdev) < 0)
-			DRM_DEBUG_DRIVER("can't enable MSI");
-	}
-
-	return 0;
-
-out_ggtt:
-	i915_ggtt_cleanup_hw(dev);
-
-	return ret;
-}
-
-/**
- * i915_driver_cleanup_hw - cleanup the setup done in i915_driver_init_hw()
- * @dev_priv: device private
- */
-static void i915_driver_cleanup_hw(struct drm_i915_private *dev_priv)
-{
-	struct drm_device *dev = dev_priv->dev;
-	struct i915_ggtt *ggtt = &dev_priv->ggtt;
-
-	if (dev->pdev->msi_enabled)
-		pci_disable_msi(dev->pdev);
-
-	pm_qos_remove_request(&dev_priv->pm_qos);
-	arch_phys_wc_del(ggtt->mtrr);
-	io_mapping_free(ggtt->mappable);
-	i915_ggtt_cleanup_hw(dev);
-}
-
-/**
- * i915_driver_register - register the driver with the rest of the system
- * @dev_priv: device private
- *
- * Perform any steps necessary to make the driver available via kernel
- * internal or userspace interfaces.
- */
-static void i915_driver_register(struct drm_i915_private *dev_priv)
-{
-	struct drm_device *dev = dev_priv->dev;
-
-	i915_gem_shrinker_init(dev_priv);
-
-	/*
-	 * Notify a valid surface after modesetting,
-	 * when running inside a VM.
-	 */
-	if (intel_vgpu_active(dev_priv))
-		I915_WRITE(vgtif_reg(display_ready), VGT_DRV_DISPLAY_READY);
-
-	/* Reveal our presence to userspace */
-	if (drm_dev_register(dev, 0) == 0) {
-		i915_debugfs_register(dev_priv);
-		i915_setup_sysfs(dev);
-		intel_modeset_register(dev_priv);
-	} else
-		DRM_ERROR("Failed to register driver for userspace access!\n");
-
-	if (INTEL_INFO(dev_priv)->num_pipes) {
-		/* Must be done after probing outputs */
-		intel_opregion_register(dev_priv);
-		acpi_video_register();
-	}
-
-	if (IS_GEN5(dev_priv))
-		intel_gpu_ips_init(dev_priv);
-
-	i915_audio_component_init(dev_priv);
-
-	/*
-	 * Some ports require correctly set-up hpd registers for detection to
-	 * work properly (leading to ghost connected connector status), e.g. VGA
-	 * on gm45.  Hence we can only set up the initial fbdev config after hpd
-	 * irqs are fully enabled. Now we should scan for the initial config
-	 * only once hotplug handling is enabled, but due to screwed-up locking
-	 * around kms/fbdev init we can't protect the fdbev initial config
-	 * scanning against hotplug events. Hence do this first and ignore the
-	 * tiny window where we will loose hotplug notifactions.
-	 */
-	intel_fbdev_initial_config_async(dev);
-}
-
-/**
- * i915_driver_unregister - cleanup the registration done in i915_driver_regiser()
- * @dev_priv: device private
- */
-static void i915_driver_unregister(struct drm_i915_private *dev_priv)
-{
-	i915_audio_component_cleanup(dev_priv);
-
-	intel_gpu_ips_teardown();
-	acpi_video_unregister();
-	intel_opregion_unregister(dev_priv);
-
-	intel_modeset_unregister(dev_priv);
-	i915_teardown_sysfs(dev_priv->dev);
-	i915_debugfs_unregister(dev_priv);
-	drm_dev_unregister(dev_priv->dev);
-
-	i915_gem_shrinker_cleanup(dev_priv);
-}
-
-/**
- * i915_driver_load - setup chip and create an initial config
- * @dev: DRM device
- * @flags: startup flags
- *
- * The driver load routine has to do several things:
- *   - drive output discovery via intel_modeset_init()
- *   - initialize the memory manager
- *   - allocate initial config memory
- *   - setup the DRM framebuffer with the allocated memory
- */
-int i915_driver_load(struct pci_dev *pdev,
-		     const struct pci_device_id *ent,
-		     struct drm_driver *driver)
-{
-	struct drm_i915_private *dev_priv;
-	int ret;
-
-	dev_priv = kzalloc(sizeof(*dev_priv), GFP_KERNEL);
-	if (dev_priv == NULL)
-		return -ENOMEM;
-
-	ret = drm_dev_init(&dev_priv->drm, driver, &pdev->dev);
-	if (ret)
-		goto out_free_priv;
-
-	/* Must be set before calling __i915_printk */
-	dev_priv->drm.pdev = pdev;
-	dev_priv->drm.dev_private = dev_priv;
-	dev_priv->dev = &dev_priv->drm;
-
-	ret = i915_driver_init_early(dev_priv, ent);
-	if (ret < 0)
-		goto out_free_priv;
-
-	ret = pci_enable_device(pdev);
-	if (ret)
-		goto out_cleanup_early;
-
-	pci_set_drvdata(pdev, &dev_priv->drm);
-
-	intel_runtime_pm_get(dev_priv);
-
-	ret = i915_driver_init_mmio(dev_priv);
-	if (ret < 0)
-		goto out_runtime_pm_put;
-
-	ret = i915_driver_init_hw(dev_priv);
-	if (ret < 0)
-		goto out_cleanup_mmio;
-
-	/*
-	 * TODO: move the vblank init and parts of modeset init steps into one
-	 * of the i915_driver_init_/i915_driver_register functions according
-	 * to the role/effect of the given init step.
-	 */
-	if (INTEL_INFO(dev_priv)->num_pipes) {
-		ret = drm_vblank_init(dev_priv->dev,
-				      INTEL_INFO(dev_priv)->num_pipes);
-		if (ret)
-			goto out_cleanup_hw;
-	}
-
-	ret = i915_load_modeset_init(dev_priv->dev);
-	if (ret < 0)
-		goto out_cleanup_vblank;
-
-	i915_driver_register(dev_priv);
-
-	intel_runtime_pm_enable(dev_priv);
-
-	intel_runtime_pm_put(dev_priv);
-
-	return 0;
-
-out_cleanup_vblank:
-	drm_vblank_cleanup(dev_priv->dev);
-out_cleanup_hw:
-	i915_driver_cleanup_hw(dev_priv);
-out_cleanup_mmio:
-	i915_driver_cleanup_mmio(dev_priv);
-out_runtime_pm_put:
-	intel_runtime_pm_put(dev_priv);
-	pci_disable_device(pdev);
-out_cleanup_early:
-	i915_driver_cleanup_early(dev_priv);
-out_free_priv:
-	i915_load_error(dev_priv, "Device initialization failed (%d)\n", ret);
-
-	kfree(dev_priv);
-
-	return ret;
-}
-
-int i915_driver_unload(struct drm_device *dev)
-{
-	struct drm_i915_private *dev_priv = dev->dev_private;
-	int ret;
-
-	intel_fbdev_fini(dev);
-
-	ret = i915_gem_suspend(dev);
-	if (ret) {
-		DRM_ERROR("failed to idle hardware: %d\n", ret);
-		return ret;
-	}
-
-	intel_display_power_get(dev_priv, POWER_DOMAIN_INIT);
-
-	i915_driver_unregister(dev_priv);
-
-	drm_vblank_cleanup(dev);
-
-	intel_modeset_cleanup(dev);
-
-	/*
-	 * free the memory space allocated for the child device
-	 * config parsed from VBT
-	 */
-	if (dev_priv->vbt.child_dev && dev_priv->vbt.child_dev_num) {
-		kfree(dev_priv->vbt.child_dev);
-		dev_priv->vbt.child_dev = NULL;
-		dev_priv->vbt.child_dev_num = 0;
-	}
-	kfree(dev_priv->vbt.sdvo_lvds_vbt_mode);
-	dev_priv->vbt.sdvo_lvds_vbt_mode = NULL;
-	kfree(dev_priv->vbt.lfp_lvds_vbt_mode);
-	dev_priv->vbt.lfp_lvds_vbt_mode = NULL;
-
-	vga_switcheroo_unregister_client(dev->pdev);
-	vga_client_register(dev->pdev, NULL, NULL, NULL);
-
-	intel_csr_ucode_fini(dev_priv);
-
-	/* Free error state after interrupts are fully disabled. */
-	cancel_delayed_work_sync(&dev_priv->gpu_error.hangcheck_work);
-	i915_destroy_error_state(dev);
-
-	/* Flush any outstanding unpin_work. */
-	flush_workqueue(dev_priv->wq);
-
-	intel_guc_fini(dev);
-	i915_gem_fini(dev);
-	intel_fbc_cleanup_cfb(dev_priv);
-
-	intel_power_domains_fini(dev_priv);
-
-	i915_driver_cleanup_hw(dev_priv);
-	i915_driver_cleanup_mmio(dev_priv);
-
-	intel_display_power_put(dev_priv, POWER_DOMAIN_INIT);
-
-	i915_driver_cleanup_early(dev_priv);
-
-	return 0;
-}
-
-int i915_driver_open(struct drm_device *dev, struct drm_file *file)
-{
-	int ret;
-
-	ret = i915_gem_open(dev, file);
-	if (ret)
-		return ret;
-
-	return 0;
-}
-
-/**
- * i915_driver_lastclose - clean up after all DRM clients have exited
- * @dev: DRM device
- *
- * Take care of cleaning up after all DRM clients have exited.  In the
- * mode setting case, we want to restore the kernel's initial mode (just
- * in case the last client left us in a bad state).
- *
- * Additionally, in the non-mode setting case, we'll tear down the GTT
- * and DMA structures, since the kernel won't be using them, and clea
- * up any GEM state.
- */
-void i915_driver_lastclose(struct drm_device *dev)
-{
-	intel_fbdev_restore_mode(dev);
-	vga_switcheroo_process_delayed_switch();
-}
-
-void i915_driver_preclose(struct drm_device *dev, struct drm_file *file)
-{
-	mutex_lock(&dev->struct_mutex);
-	i915_gem_context_close(dev, file);
-	i915_gem_release(dev, file);
-	mutex_unlock(&dev->struct_mutex);
-}
-
-void i915_driver_postclose(struct drm_device *dev, struct drm_file *file)
-{
-	struct drm_i915_file_private *file_priv = file->driver_priv;
-
-	kfree(file_priv);
-}
-
-static int
-i915_gem_reject_pin_ioctl(struct drm_device *dev, void *data,
-			  struct drm_file *file)
-{
-	return -ENODEV;
-}
-
-const struct drm_ioctl_desc i915_ioctls[] = {
-	DRM_IOCTL_DEF_DRV(I915_INIT, drm_noop, DRM_AUTH|DRM_MASTER|DRM_ROOT_ONLY),
-	DRM_IOCTL_DEF_DRV(I915_FLUSH, drm_noop, DRM_AUTH),
-	DRM_IOCTL_DEF_DRV(I915_FLIP, drm_noop, DRM_AUTH),
-	DRM_IOCTL_DEF_DRV(I915_BATCHBUFFER, drm_noop, DRM_AUTH),
-	DRM_IOCTL_DEF_DRV(I915_IRQ_EMIT, drm_noop, DRM_AUTH),
-	DRM_IOCTL_DEF_DRV(I915_IRQ_WAIT, drm_noop, DRM_AUTH),
-	DRM_IOCTL_DEF_DRV(I915_GETPARAM, i915_getparam, DRM_AUTH|DRM_RENDER_ALLOW),
-	DRM_IOCTL_DEF_DRV(I915_SETPARAM, drm_noop, DRM_AUTH|DRM_MASTER|DRM_ROOT_ONLY),
-	DRM_IOCTL_DEF_DRV(I915_ALLOC, drm_noop, DRM_AUTH),
-	DRM_IOCTL_DEF_DRV(I915_FREE, drm_noop, DRM_AUTH),
-	DRM_IOCTL_DEF_DRV(I915_INIT_HEAP, drm_noop, DRM_AUTH|DRM_MASTER|DRM_ROOT_ONLY),
-	DRM_IOCTL_DEF_DRV(I915_CMDBUFFER, drm_noop, DRM_AUTH),
-	DRM_IOCTL_DEF_DRV(I915_DESTROY_HEAP,  drm_noop, DRM_AUTH|DRM_MASTER|DRM_ROOT_ONLY),
-	DRM_IOCTL_DEF_DRV(I915_SET_VBLANK_PIPE,  drm_noop, DRM_AUTH|DRM_MASTER|DRM_ROOT_ONLY),
-	DRM_IOCTL_DEF_DRV(I915_GET_VBLANK_PIPE,  drm_noop, DRM_AUTH),
-	DRM_IOCTL_DEF_DRV(I915_VBLANK_SWAP, drm_noop, DRM_AUTH),
-	DRM_IOCTL_DEF_DRV(I915_HWS_ADDR, drm_noop, DRM_AUTH|DRM_MASTER|DRM_ROOT_ONLY),
-	DRM_IOCTL_DEF_DRV(I915_GEM_INIT, drm_noop, DRM_AUTH|DRM_MASTER|DRM_ROOT_ONLY),
-	DRM_IOCTL_DEF_DRV(I915_GEM_EXECBUFFER, i915_gem_execbuffer, DRM_AUTH),
-	DRM_IOCTL_DEF_DRV(I915_GEM_EXECBUFFER2, i915_gem_execbuffer2, DRM_AUTH|DRM_RENDER_ALLOW),
-	DRM_IOCTL_DEF_DRV(I915_GEM_PIN, i915_gem_reject_pin_ioctl, DRM_AUTH|DRM_ROOT_ONLY),
-	DRM_IOCTL_DEF_DRV(I915_GEM_UNPIN, i915_gem_reject_pin_ioctl, DRM_AUTH|DRM_ROOT_ONLY),
-	DRM_IOCTL_DEF_DRV(I915_GEM_BUSY, i915_gem_busy_ioctl, DRM_AUTH|DRM_RENDER_ALLOW),
-	DRM_IOCTL_DEF_DRV(I915_GEM_SET_CACHING, i915_gem_set_caching_ioctl, DRM_RENDER_ALLOW),
-	DRM_IOCTL_DEF_DRV(I915_GEM_GET_CACHING, i915_gem_get_caching_ioctl, DRM_RENDER_ALLOW),
-	DRM_IOCTL_DEF_DRV(I915_GEM_THROTTLE, i915_gem_throttle_ioctl, DRM_AUTH|DRM_RENDER_ALLOW),
-	DRM_IOCTL_DEF_DRV(I915_GEM_ENTERVT, drm_noop, DRM_AUTH|DRM_MASTER|DRM_ROOT_ONLY),
-	DRM_IOCTL_DEF_DRV(I915_GEM_LEAVEVT, drm_noop, DRM_AUTH|DRM_MASTER|DRM_ROOT_ONLY),
-	DRM_IOCTL_DEF_DRV(I915_GEM_CREATE, i915_gem_create_ioctl, DRM_RENDER_ALLOW),
-	DRM_IOCTL_DEF_DRV(I915_GEM_PREAD, i915_gem_pread_ioctl, DRM_RENDER_ALLOW),
-	DRM_IOCTL_DEF_DRV(I915_GEM_PWRITE, i915_gem_pwrite_ioctl, DRM_RENDER_ALLOW),
-	DRM_IOCTL_DEF_DRV(I915_GEM_MMAP, i915_gem_mmap_ioctl, DRM_RENDER_ALLOW),
-	DRM_IOCTL_DEF_DRV(I915_GEM_MMAP_GTT, i915_gem_mmap_gtt_ioctl, DRM_RENDER_ALLOW),
-	DRM_IOCTL_DEF_DRV(I915_GEM_SET_DOMAIN, i915_gem_set_domain_ioctl, DRM_RENDER_ALLOW),
-	DRM_IOCTL_DEF_DRV(I915_GEM_SW_FINISH, i915_gem_sw_finish_ioctl, DRM_RENDER_ALLOW),
-	DRM_IOCTL_DEF_DRV(I915_GEM_SET_TILING, i915_gem_set_tiling, DRM_RENDER_ALLOW),
-	DRM_IOCTL_DEF_DRV(I915_GEM_GET_TILING, i915_gem_get_tiling, DRM_RENDER_ALLOW),
-	DRM_IOCTL_DEF_DRV(I915_GEM_GET_APERTURE, i915_gem_get_aperture_ioctl, DRM_RENDER_ALLOW),
-	DRM_IOCTL_DEF_DRV(I915_GET_PIPE_FROM_CRTC_ID, intel_get_pipe_from_crtc_id, 0),
-	DRM_IOCTL_DEF_DRV(I915_GEM_MADVISE, i915_gem_madvise_ioctl, DRM_RENDER_ALLOW),
-	DRM_IOCTL_DEF_DRV(I915_OVERLAY_PUT_IMAGE, intel_overlay_put_image_ioctl, DRM_MASTER|DRM_CONTROL_ALLOW),
-	DRM_IOCTL_DEF_DRV(I915_OVERLAY_ATTRS, intel_overlay_attrs_ioctl, DRM_MASTER|DRM_CONTROL_ALLOW),
-	DRM_IOCTL_DEF_DRV(I915_SET_SPRITE_COLORKEY, intel_sprite_set_colorkey, DRM_MASTER|DRM_CONTROL_ALLOW),
-	DRM_IOCTL_DEF_DRV(I915_GET_SPRITE_COLORKEY, drm_noop, DRM_MASTER|DRM_CONTROL_ALLOW),
-	DRM_IOCTL_DEF_DRV(I915_GEM_WAIT, i915_gem_wait_ioctl, DRM_AUTH|DRM_RENDER_ALLOW),
-	DRM_IOCTL_DEF_DRV(I915_GEM_CONTEXT_CREATE, i915_gem_context_create_ioctl, DRM_RENDER_ALLOW),
-	DRM_IOCTL_DEF_DRV(I915_GEM_CONTEXT_DESTROY, i915_gem_context_destroy_ioctl, DRM_RENDER_ALLOW),
-	DRM_IOCTL_DEF_DRV(I915_REG_READ, i915_reg_read_ioctl, DRM_RENDER_ALLOW),
-	DRM_IOCTL_DEF_DRV(I915_GET_RESET_STATS, i915_gem_context_reset_stats_ioctl, DRM_RENDER_ALLOW),
-	DRM_IOCTL_DEF_DRV(I915_GEM_USERPTR, i915_gem_userptr_ioctl, DRM_RENDER_ALLOW),
-	DRM_IOCTL_DEF_DRV(I915_GEM_CONTEXT_GETPARAM, i915_gem_context_getparam_ioctl, DRM_RENDER_ALLOW),
-	DRM_IOCTL_DEF_DRV(I915_GEM_CONTEXT_SETPARAM, i915_gem_context_setparam_ioctl, DRM_RENDER_ALLOW),
-};
-
-int i915_max_ioctl = ARRAY_SIZE(i915_ioctls);
diff --git a/drivers/gpu/drm/i915/i915_drv.c b/drivers/gpu/drm/i915/i915_drv.c
index b13d6751ebe4..8b1369589684 100644
--- a/drivers/gpu/drm/i915/i915_drv.c
+++ b/drivers/gpu/drm/i915/i915_drv.c
@@ -27,21 +27,30 @@
  *
  */
 
-#include <linux/device.h>
 #include <linux/acpi.h>
-#include <drm/drmP.h>
-#include <drm/i915_drm.h>
-#include "i915_drv.h"
-#include "i915_trace.h"
-#include "intel_drv.h"
-
 #include <linux/apple-gmux.h>
 #include <linux/console.h>
+#include <linux/device.h>
+#include <linux/oom.h>
 #include <linux/module.h>
+#include <linux/pci.h>
+#include <linux/pm.h>
 #include <linux/pm_runtime.h>
+#include <linux/pnp.h>
+#include <linux/slab.h>
 #include <linux/vgaarb.h>
 #include <linux/vga_switcheroo.h>
+#include <linux/vt.h>
+#include <acpi/video.h>
+
+#include <drm/drmP.h>
 #include <drm/drm_crtc_helper.h>
+#include <drm/i915_drm.h>
+
+#include "i915_drv.h"
+#include "i915_trace.h"
+#include "i915_vgpu.h"
+#include "intel_drv.h"
 
 static struct drm_driver driver;
 
@@ -340,219 +349,1795 @@ static const struct intel_device_info intel_skylake_info = {
 	.gen = 9,
 };
 
-static const struct intel_device_info intel_skylake_gt3_info = {
-	BDW_FEATURES,
-	.is_skylake = 1,
-	.gen = 9,
-	.ring_mask = RENDER_RING | BSD_RING | BLT_RING | VEBOX_RING | BSD2_RING,
-};
+static const struct intel_device_info intel_skylake_gt3_info = {
+	BDW_FEATURES,
+	.is_skylake = 1,
+	.gen = 9,
+	.ring_mask = RENDER_RING | BSD_RING | BLT_RING | VEBOX_RING | BSD2_RING,
+};
+
+static const struct intel_device_info intel_broxton_info = {
+	.is_preliminary = 1,
+	.is_broxton = 1,
+	.gen = 9,
+	.need_gfx_hws = 1, .has_hotplug = 1,
+	.ring_mask = RENDER_RING | BSD_RING | BLT_RING | VEBOX_RING,
+	.num_pipes = 3,
+	.has_ddi = 1,
+	.has_fpga_dbg = 1,
+	.has_fbc = 1,
+	GEN_DEFAULT_PIPEOFFSETS,
+	IVB_CURSOR_OFFSETS,
+	BDW_COLORS,
+};
+
+static const struct intel_device_info intel_kabylake_info = {
+	BDW_FEATURES,
+	.is_kabylake = 1,
+	.gen = 9,
+};
+
+static const struct intel_device_info intel_kabylake_gt3_info = {
+	BDW_FEATURES,
+	.is_kabylake = 1,
+	.gen = 9,
+	.ring_mask = RENDER_RING | BSD_RING | BLT_RING | VEBOX_RING | BSD2_RING,
+};
+
+/*
+ * Make sure any device matches here are from most specific to most
+ * general.  For example, since the Quanta match is based on the subsystem
+ * and subvendor IDs, we need it to come before the more general IVB
+ * PCI ID matches, otherwise we'll use the wrong info struct above.
+ */
+static const struct pci_device_id pciidlist[] = {
+	INTEL_I830_IDS(&intel_i830_info),
+	INTEL_I845G_IDS(&intel_845g_info),
+	INTEL_I85X_IDS(&intel_i85x_info),
+	INTEL_I865G_IDS(&intel_i865g_info),
+	INTEL_I915G_IDS(&intel_i915g_info),
+	INTEL_I915GM_IDS(&intel_i915gm_info),
+	INTEL_I945G_IDS(&intel_i945g_info),
+	INTEL_I945GM_IDS(&intel_i945gm_info),
+	INTEL_I965G_IDS(&intel_i965g_info),
+	INTEL_G33_IDS(&intel_g33_info),
+	INTEL_I965GM_IDS(&intel_i965gm_info),
+	INTEL_GM45_IDS(&intel_gm45_info),
+	INTEL_G45_IDS(&intel_g45_info),
+	INTEL_PINEVIEW_IDS(&intel_pineview_info),
+	INTEL_IRONLAKE_D_IDS(&intel_ironlake_d_info),
+	INTEL_IRONLAKE_M_IDS(&intel_ironlake_m_info),
+	INTEL_SNB_D_IDS(&intel_sandybridge_d_info),
+	INTEL_SNB_M_IDS(&intel_sandybridge_m_info),
+	INTEL_IVB_Q_IDS(&intel_ivybridge_q_info), /* must be first IVB */
+	INTEL_IVB_M_IDS(&intel_ivybridge_m_info),
+	INTEL_IVB_D_IDS(&intel_ivybridge_d_info),
+	INTEL_HSW_D_IDS(&intel_haswell_d_info),
+	INTEL_HSW_M_IDS(&intel_haswell_m_info),
+	INTEL_VLV_M_IDS(&intel_valleyview_m_info),
+	INTEL_VLV_D_IDS(&intel_valleyview_d_info),
+	INTEL_BDW_GT12M_IDS(&intel_broadwell_m_info),
+	INTEL_BDW_GT12D_IDS(&intel_broadwell_d_info),
+	INTEL_BDW_GT3M_IDS(&intel_broadwell_gt3m_info),
+	INTEL_BDW_GT3D_IDS(&intel_broadwell_gt3d_info),
+	INTEL_CHV_IDS(&intel_cherryview_info),
+	INTEL_SKL_GT1_IDS(&intel_skylake_info),
+	INTEL_SKL_GT2_IDS(&intel_skylake_info),
+	INTEL_SKL_GT3_IDS(&intel_skylake_gt3_info),
+	INTEL_SKL_GT4_IDS(&intel_skylake_gt3_info),
+	INTEL_BXT_IDS(&intel_broxton_info),
+	INTEL_KBL_GT1_IDS(&intel_kabylake_info),
+	INTEL_KBL_GT2_IDS(&intel_kabylake_info),
+	INTEL_KBL_GT3_IDS(&intel_kabylake_gt3_info),
+	INTEL_KBL_GT4_IDS(&intel_kabylake_gt3_info),
+	{0, 0, 0}
+};
+MODULE_DEVICE_TABLE(pci, pciidlist);
+
+static unsigned int i915_load_fail_count;
+
+bool __i915_inject_load_failure(const char *func, int line)
+{
+	if (i915_load_fail_count >= i915.inject_load_failure)
+		return false;
+
+	if (++i915_load_fail_count == i915.inject_load_failure) {
+		DRM_INFO("Injecting failure at checkpoint %u [%s:%d]\n",
+			 i915.inject_load_failure, func, line);
+		return true;
+	}
+
+	return false;
+}
+
+#define FDO_BUG_URL "https://bugs.freedesktop.org/enter_bug.cgi?product=DRI"
+#define FDO_BUG_MSG "Please file a bug at " FDO_BUG_URL " against DRM/Intel " \
+		    "providing the dmesg log by booting with drm.debug=0xf"
+
+void
+__i915_printk(struct drm_i915_private *dev_priv, const char *level,
+	      const char *fmt, ...)
+{
+	static bool shown_bug_once;
+	struct device *dev = dev_priv->dev->dev;
+	bool is_error = level[1] <= KERN_ERR[1];
+	bool is_debug = level[1] == KERN_DEBUG[1];
+	struct va_format vaf;
+	va_list args;
+
+	if (is_debug && !(drm_debug & DRM_UT_DRIVER))
+		return;
+
+	va_start(args, fmt);
+
+	vaf.fmt = fmt;
+	vaf.va = &args;
+
+	dev_printk(level, dev, "[" DRM_NAME ":%ps] %pV",
+		   __builtin_return_address(0), &vaf);
+
+	if (is_error && !shown_bug_once) {
+		dev_notice(dev, "%s", FDO_BUG_MSG);
+		shown_bug_once = true;
+	}
+
+	va_end(args);
+}
+
+static bool i915_error_injected(struct drm_i915_private *dev_priv)
+{
+	return i915.inject_load_failure &&
+	       i915_load_fail_count == i915.inject_load_failure;
+}
+
+#define i915_load_error(dev_priv, fmt, ...)				     \
+	__i915_printk(dev_priv,						     \
+		      i915_error_injected(dev_priv) ? KERN_DEBUG : KERN_ERR, \
+		      fmt, ##__VA_ARGS__)
+
+
+static enum intel_pch intel_virt_detect_pch(struct drm_device *dev)
+{
+	enum intel_pch ret = PCH_NOP;
+
+	/*
+	 * In a virtualized passthrough environment we can be in a
+	 * setup where the ISA bridge is not able to be passed through.
+	 * In this case, a south bridge can be emulated and we have to
+	 * make an educated guess as to which PCH is really there.
+	 */
+
+	if (IS_GEN5(dev)) {
+		ret = PCH_IBX;
+		DRM_DEBUG_KMS("Assuming Ibex Peak PCH\n");
+	} else if (IS_GEN6(dev) || IS_IVYBRIDGE(dev)) {
+		ret = PCH_CPT;
+		DRM_DEBUG_KMS("Assuming CouarPoint PCH\n");
+	} else if (IS_HASWELL(dev) || IS_BROADWELL(dev)) {
+		ret = PCH_LPT;
+		DRM_DEBUG_KMS("Assuming LynxPoint PCH\n");
+	} else if (IS_SKYLAKE(dev) || IS_KABYLAKE(dev)) {
+		ret = PCH_SPT;
+		DRM_DEBUG_KMS("Assuming SunrisePoint PCH\n");
+	}
+
+	return ret;
+}
+
+static void intel_detect_pch(struct drm_device *dev)
+{
+	struct drm_i915_private *dev_priv = dev->dev_private;
+	struct pci_dev *pch = NULL;
+
+	/* In all current cases, num_pipes is equivalent to the PCH_NOP setting
+	 * (which really amounts to a PCH but no South Display).
+	 */
+	if (INTEL_INFO(dev)->num_pipes == 0) {
+		dev_priv->pch_type = PCH_NOP;
+		return;
+	}
+
+	/*
+	 * The reason to probe ISA bridge instead of Dev31:Fun0 is to
+	 * make graphics device passthrough work easy for VMM, that only
+	 * need to expose ISA bridge to let driver know the real hardware
+	 * underneath. This is a requirement from virtualization team.
+	 *
+	 * In some virtualized environments (e.g. XEN), there is irrelevant
+	 * ISA bridge in the system. To work reliably, we should scan trhough
+	 * all the ISA bridge devices and check for the first match, instead
+	 * of only checking the first one.
+	 */
+	while ((pch = pci_get_class(PCI_CLASS_BRIDGE_ISA << 8, pch))) {
+		if (pch->vendor == PCI_VENDOR_ID_INTEL) {
+			unsigned short id = pch->device & INTEL_PCH_DEVICE_ID_MASK;
+			dev_priv->pch_id = id;
+
+			if (id == INTEL_PCH_IBX_DEVICE_ID_TYPE) {
+				dev_priv->pch_type = PCH_IBX;
+				DRM_DEBUG_KMS("Found Ibex Peak PCH\n");
+				WARN_ON(!IS_GEN5(dev));
+			} else if (id == INTEL_PCH_CPT_DEVICE_ID_TYPE) {
+				dev_priv->pch_type = PCH_CPT;
+				DRM_DEBUG_KMS("Found CougarPoint PCH\n");
+				WARN_ON(!(IS_GEN6(dev) || IS_IVYBRIDGE(dev)));
+			} else if (id == INTEL_PCH_PPT_DEVICE_ID_TYPE) {
+				/* PantherPoint is CPT compatible */
+				dev_priv->pch_type = PCH_CPT;
+				DRM_DEBUG_KMS("Found PantherPoint PCH\n");
+				WARN_ON(!(IS_GEN6(dev) || IS_IVYBRIDGE(dev)));
+			} else if (id == INTEL_PCH_LPT_DEVICE_ID_TYPE) {
+				dev_priv->pch_type = PCH_LPT;
+				DRM_DEBUG_KMS("Found LynxPoint PCH\n");
+				WARN_ON(!IS_HASWELL(dev) && !IS_BROADWELL(dev));
+				WARN_ON(IS_HSW_ULT(dev) || IS_BDW_ULT(dev));
+			} else if (id == INTEL_PCH_LPT_LP_DEVICE_ID_TYPE) {
+				dev_priv->pch_type = PCH_LPT;
+				DRM_DEBUG_KMS("Found LynxPoint LP PCH\n");
+				WARN_ON(!IS_HASWELL(dev) && !IS_BROADWELL(dev));
+				WARN_ON(!IS_HSW_ULT(dev) && !IS_BDW_ULT(dev));
+			} else if (id == INTEL_PCH_SPT_DEVICE_ID_TYPE) {
+				dev_priv->pch_type = PCH_SPT;
+				DRM_DEBUG_KMS("Found SunrisePoint PCH\n");
+				WARN_ON(!IS_SKYLAKE(dev) &&
+					!IS_KABYLAKE(dev));
+			} else if (id == INTEL_PCH_SPT_LP_DEVICE_ID_TYPE) {
+				dev_priv->pch_type = PCH_SPT;
+				DRM_DEBUG_KMS("Found SunrisePoint LP PCH\n");
+				WARN_ON(!IS_SKYLAKE(dev) &&
+					!IS_KABYLAKE(dev));
+			} else if ((id == INTEL_PCH_P2X_DEVICE_ID_TYPE) ||
+				   (id == INTEL_PCH_P3X_DEVICE_ID_TYPE) ||
+				   ((id == INTEL_PCH_QEMU_DEVICE_ID_TYPE) &&
+				    pch->subsystem_vendor == 0x1af4 &&
+				    pch->subsystem_device == 0x1100)) {
+				dev_priv->pch_type = intel_virt_detect_pch(dev);
+			} else
+				continue;
+
+			break;
+		}
+	}
+	if (!pch)
+		DRM_DEBUG_KMS("No PCH found.\n");
+
+	pci_dev_put(pch);
+}
+
+bool i915_semaphore_is_enabled(struct drm_i915_private *dev_priv)
+{
+	if (INTEL_GEN(dev_priv) < 6)
+		return false;
+
+	if (i915.semaphores >= 0)
+		return i915.semaphores;
+
+	/* TODO: make semaphores and Execlists play nicely together */
+	if (i915.enable_execlists)
+		return false;
+
+#ifdef CONFIG_INTEL_IOMMU
+	/* Enable semaphores on SNB when IO remapping is off */
+	if (IS_GEN6(dev_priv) && intel_iommu_gfx_mapped)
+		return false;
+#endif
+
+	return true;
+}
+
+static int i915_getparam(struct drm_device *dev, void *data,
+			 struct drm_file *file_priv)
+{
+	struct drm_i915_private *dev_priv = dev->dev_private;
+	drm_i915_getparam_t *param = data;
+	int value;
+
+	switch (param->param) {
+	case I915_PARAM_IRQ_ACTIVE:
+	case I915_PARAM_ALLOW_BATCHBUFFER:
+	case I915_PARAM_LAST_DISPATCH:
+		/* Reject all old ums/dri params. */
+		return -ENODEV;
+	case I915_PARAM_CHIPSET_ID:
+		value = dev->pdev->device;
+		break;
+	case I915_PARAM_REVISION:
+		value = dev->pdev->revision;
+		break;
+	case I915_PARAM_HAS_GEM:
+		value = 1;
+		break;
+	case I915_PARAM_NUM_FENCES_AVAIL:
+		value = dev_priv->num_fence_regs;
+		break;
+	case I915_PARAM_HAS_OVERLAY:
+		value = dev_priv->overlay ? 1 : 0;
+		break;
+	case I915_PARAM_HAS_PAGEFLIPPING:
+		value = 1;
+		break;
+	case I915_PARAM_HAS_EXECBUF2:
+		/* depends on GEM */
+		value = 1;
+		break;
+	case I915_PARAM_HAS_BSD:
+		value = intel_engine_initialized(&dev_priv->engine[VCS]);
+		break;
+	case I915_PARAM_HAS_BLT:
+		value = intel_engine_initialized(&dev_priv->engine[BCS]);
+		break;
+	case I915_PARAM_HAS_VEBOX:
+		value = intel_engine_initialized(&dev_priv->engine[VECS]);
+		break;
+	case I915_PARAM_HAS_BSD2:
+		value = intel_engine_initialized(&dev_priv->engine[VCS2]);
+		break;
+	case I915_PARAM_HAS_RELAXED_FENCING:
+		value = 1;
+		break;
+	case I915_PARAM_HAS_COHERENT_RINGS:
+		value = 1;
+		break;
+	case I915_PARAM_HAS_EXEC_CONSTANTS:
+		value = INTEL_INFO(dev)->gen >= 4;
+		break;
+	case I915_PARAM_HAS_RELAXED_DELTA:
+		value = 1;
+		break;
+	case I915_PARAM_HAS_GEN7_SOL_RESET:
+		value = 1;
+		break;
+	case I915_PARAM_HAS_LLC:
+		value = HAS_LLC(dev);
+		break;
+	case I915_PARAM_HAS_WT:
+		value = HAS_WT(dev);
+		break;
+	case I915_PARAM_HAS_ALIASING_PPGTT:
+		value = USES_PPGTT(dev);
+		break;
+	case I915_PARAM_HAS_WAIT_TIMEOUT:
+		value = 1;
+		break;
+	case I915_PARAM_HAS_SEMAPHORES:
+		value = i915_semaphore_is_enabled(dev_priv);
+		break;
+	case I915_PARAM_HAS_PRIME_VMAP_FLUSH:
+		value = 1;
+		break;
+	case I915_PARAM_HAS_SECURE_BATCHES:
+		value = capable(CAP_SYS_ADMIN);
+		break;
+	case I915_PARAM_HAS_PINNED_BATCHES:
+		value = 1;
+		break;
+	case I915_PARAM_HAS_EXEC_NO_RELOC:
+		value = 1;
+		break;
+	case I915_PARAM_HAS_EXEC_HANDLE_LUT:
+		value = 1;
+		break;
+	case I915_PARAM_CMD_PARSER_VERSION:
+		value = i915_cmd_parser_get_version(dev_priv);
+		break;
+	case I915_PARAM_HAS_COHERENT_PHYS_GTT:
+		value = 1;
+		break;
+	case I915_PARAM_MMAP_VERSION:
+		value = 1;
+		break;
+	case I915_PARAM_SUBSLICE_TOTAL:
+		value = INTEL_INFO(dev)->subslice_total;
+		if (!value)
+			return -ENODEV;
+		break;
+	case I915_PARAM_EU_TOTAL:
+		value = INTEL_INFO(dev)->eu_total;
+		if (!value)
+			return -ENODEV;
+		break;
+	case I915_PARAM_HAS_GPU_RESET:
+		value = i915.enable_hangcheck && intel_has_gpu_reset(dev_priv);
+		break;
+	case I915_PARAM_HAS_RESOURCE_STREAMER:
+		value = HAS_RESOURCE_STREAMER(dev);
+		break;
+	case I915_PARAM_HAS_EXEC_SOFTPIN:
+		value = 1;
+		break;
+	default:
+		DRM_DEBUG("Unknown parameter %d\n", param->param);
+		return -EINVAL;
+	}
+
+	if (copy_to_user(param->value, &value, sizeof(int))) {
+		DRM_ERROR("copy_to_user failed\n");
+		return -EFAULT;
+	}
+
+	return 0;
+}
+
+static int i915_get_bridge_dev(struct drm_device *dev)
+{
+	struct drm_i915_private *dev_priv = dev->dev_private;
+
+	dev_priv->bridge_dev = pci_get_bus_and_slot(0, PCI_DEVFN(0, 0));
+	if (!dev_priv->bridge_dev) {
+		DRM_ERROR("bridge device not found\n");
+		return -1;
+	}
+	return 0;
+}
+
+/* Allocate space for the MCH regs if needed, return nonzero on error */
+static int
+intel_alloc_mchbar_resource(struct drm_device *dev)
+{
+	struct drm_i915_private *dev_priv = dev->dev_private;
+	int reg = INTEL_INFO(dev)->gen >= 4 ? MCHBAR_I965 : MCHBAR_I915;
+	u32 temp_lo, temp_hi = 0;
+	u64 mchbar_addr;
+	int ret;
+
+	if (INTEL_INFO(dev)->gen >= 4)
+		pci_read_config_dword(dev_priv->bridge_dev, reg + 4, &temp_hi);
+	pci_read_config_dword(dev_priv->bridge_dev, reg, &temp_lo);
+	mchbar_addr = ((u64)temp_hi << 32) | temp_lo;
+
+	/* If ACPI doesn't have it, assume we need to allocate it ourselves */
+#ifdef CONFIG_PNP
+	if (mchbar_addr &&
+	    pnp_range_reserved(mchbar_addr, mchbar_addr + MCHBAR_SIZE))
+		return 0;
+#endif
+
+	/* Get some space for it */
+	dev_priv->mch_res.name = "i915 MCHBAR";
+	dev_priv->mch_res.flags = IORESOURCE_MEM;
+	ret = pci_bus_alloc_resource(dev_priv->bridge_dev->bus,
+				     &dev_priv->mch_res,
+				     MCHBAR_SIZE, MCHBAR_SIZE,
+				     PCIBIOS_MIN_MEM,
+				     0, pcibios_align_resource,
+				     dev_priv->bridge_dev);
+	if (ret) {
+		DRM_DEBUG_DRIVER("failed bus alloc: %d\n", ret);
+		dev_priv->mch_res.start = 0;
+		return ret;
+	}
+
+	if (INTEL_INFO(dev)->gen >= 4)
+		pci_write_config_dword(dev_priv->bridge_dev, reg + 4,
+				       upper_32_bits(dev_priv->mch_res.start));
+
+	pci_write_config_dword(dev_priv->bridge_dev, reg,
+			       lower_32_bits(dev_priv->mch_res.start));
+	return 0;
+}
+
+/* Setup MCHBAR if possible, return true if we should disable it again */
+static void
+intel_setup_mchbar(struct drm_device *dev)
+{
+	struct drm_i915_private *dev_priv = dev->dev_private;
+	int mchbar_reg = INTEL_INFO(dev)->gen >= 4 ? MCHBAR_I965 : MCHBAR_I915;
+	u32 temp;
+	bool enabled;
+
+	if (IS_VALLEYVIEW(dev) || IS_CHERRYVIEW(dev))
+		return;
+
+	dev_priv->mchbar_need_disable = false;
+
+	if (IS_I915G(dev) || IS_I915GM(dev)) {
+		pci_read_config_dword(dev_priv->bridge_dev, DEVEN, &temp);
+		enabled = !!(temp & DEVEN_MCHBAR_EN);
+	} else {
+		pci_read_config_dword(dev_priv->bridge_dev, mchbar_reg, &temp);
+		enabled = temp & 1;
+	}
+
+	/* If it's already enabled, don't have to do anything */
+	if (enabled)
+		return;
+
+	if (intel_alloc_mchbar_resource(dev))
+		return;
+
+	dev_priv->mchbar_need_disable = true;
+
+	/* Space is allocated or reserved, so enable it. */
+	if (IS_I915G(dev) || IS_I915GM(dev)) {
+		pci_write_config_dword(dev_priv->bridge_dev, DEVEN,
+				       temp | DEVEN_MCHBAR_EN);
+	} else {
+		pci_read_config_dword(dev_priv->bridge_dev, mchbar_reg, &temp);
+		pci_write_config_dword(dev_priv->bridge_dev, mchbar_reg, temp | 1);
+	}
+}
+
+static void
+intel_teardown_mchbar(struct drm_device *dev)
+{
+	struct drm_i915_private *dev_priv = dev->dev_private;
+	int mchbar_reg = INTEL_INFO(dev)->gen >= 4 ? MCHBAR_I965 : MCHBAR_I915;
+
+	if (dev_priv->mchbar_need_disable) {
+		if (IS_I915G(dev) || IS_I915GM(dev)) {
+			u32 deven_val;
+
+			pci_read_config_dword(dev_priv->bridge_dev, DEVEN,
+					      &deven_val);
+			deven_val &= ~DEVEN_MCHBAR_EN;
+			pci_write_config_dword(dev_priv->bridge_dev, DEVEN,
+					       deven_val);
+		} else {
+			u32 mchbar_val;
+
+			pci_read_config_dword(dev_priv->bridge_dev, mchbar_reg,
+					      &mchbar_val);
+			mchbar_val &= ~1;
+			pci_write_config_dword(dev_priv->bridge_dev, mchbar_reg,
+					       mchbar_val);
+		}
+	}
+
+	if (dev_priv->mch_res.start)
+		release_resource(&dev_priv->mch_res);
+}
+
+/* true = enable decode, false = disable decoder */
+static unsigned int i915_vga_set_decode(void *cookie, bool state)
+{
+	struct drm_device *dev = cookie;
+
+	intel_modeset_vga_set_state(dev, state);
+	if (state)
+		return VGA_RSRC_LEGACY_IO | VGA_RSRC_LEGACY_MEM |
+		       VGA_RSRC_NORMAL_IO | VGA_RSRC_NORMAL_MEM;
+	else
+		return VGA_RSRC_NORMAL_IO | VGA_RSRC_NORMAL_MEM;
+}
+
+static void i915_switcheroo_set_state(struct pci_dev *pdev, enum vga_switcheroo_state state)
+{
+	struct drm_device *dev = pci_get_drvdata(pdev);
+	pm_message_t pmm = { .event = PM_EVENT_SUSPEND };
+
+	if (state == VGA_SWITCHEROO_ON) {
+		pr_info("switched on\n");
+		dev->switch_power_state = DRM_SWITCH_POWER_CHANGING;
+		/* i915 resume handler doesn't set to D0 */
+		pci_set_power_state(dev->pdev, PCI_D0);
+		i915_resume_switcheroo(dev);
+		dev->switch_power_state = DRM_SWITCH_POWER_ON;
+	} else {
+		pr_info("switched off\n");
+		dev->switch_power_state = DRM_SWITCH_POWER_CHANGING;
+		i915_suspend_switcheroo(dev, pmm);
+		dev->switch_power_state = DRM_SWITCH_POWER_OFF;
+	}
+}
+
+static bool i915_switcheroo_can_switch(struct pci_dev *pdev)
+{
+	struct drm_device *dev = pci_get_drvdata(pdev);
+
+	/*
+	 * FIXME: open_count is protected by drm_global_mutex but that would lead to
+	 * locking inversion with the driver load path. And the access here is
+	 * completely racy anyway. So don't bother with locking for now.
+	 */
+	return dev->open_count == 0;
+}
+
+static const struct vga_switcheroo_client_ops i915_switcheroo_ops = {
+	.set_gpu_state = i915_switcheroo_set_state,
+	.reprobe = NULL,
+	.can_switch = i915_switcheroo_can_switch,
+};
+
+static void i915_gem_fini(struct drm_device *dev)
+{
+	struct drm_i915_private *dev_priv = to_i915(dev);
+
+	/*
+	 * Neither the BIOS, ourselves or any other kernel
+	 * expects the system to be in execlists mode on startup,
+	 * so we need to reset the GPU back to legacy mode. And the only
+	 * known way to disable logical contexts is through a GPU reset.
+	 *
+	 * So in order to leave the system in a known default configuration,
+	 * always reset the GPU upon unload. Afterwards we then clean up the
+	 * GEM state tracking, flushing off the requests and leaving the
+	 * system in a known idle state.
+	 *
+	 * Note that is of the upmost importance that the GPU is idle and
+	 * all stray writes are flushed *before* we dismantle the backing
+	 * storage for the pinned objects.
+	 *
+	 * However, since we are uncertain that reseting the GPU on older
+	 * machines is a good idea, we don't - just in case it leaves the
+	 * machine in an unusable condition.
+	 */
+	if (HAS_HW_CONTEXTS(dev)) {
+		int reset = intel_gpu_reset(dev_priv, ALL_ENGINES);
+		WARN_ON(reset && reset != -ENODEV);
+	}
+
+	mutex_lock(&dev->struct_mutex);
+	i915_gem_reset(dev);
+	i915_gem_cleanup_engines(dev);
+	i915_gem_context_fini(dev);
+	mutex_unlock(&dev->struct_mutex);
+
+	WARN_ON(!list_empty(&to_i915(dev)->context_list));
+}
+
+static int i915_load_modeset_init(struct drm_device *dev)
+{
+	struct drm_i915_private *dev_priv = dev->dev_private;
+	int ret;
+
+	if (i915_inject_load_failure())
+		return -ENODEV;
+
+	ret = intel_bios_init(dev_priv);
+	if (ret)
+		DRM_INFO("failed to find VBIOS tables\n");
+
+	/* If we have > 1 VGA cards, then we need to arbitrate access
+	 * to the common VGA resources.
+	 *
+	 * If we are a secondary display controller (!PCI_DISPLAY_CLASS_VGA),
+	 * then we do not take part in VGA arbitration and the
+	 * vga_client_register() fails with -ENODEV.
+	 */
+	ret = vga_client_register(dev->pdev, dev, NULL, i915_vga_set_decode);
+	if (ret && ret != -ENODEV)
+		goto out;
+
+	intel_register_dsm_handler();
+
+	ret = vga_switcheroo_register_client(dev->pdev, &i915_switcheroo_ops, false);
+	if (ret)
+		goto cleanup_vga_client;
+
+	/* must happen before intel_power_domains_init_hw() on VLV/CHV */
+	intel_update_rawclk(dev_priv);
+
+	intel_power_domains_init_hw(dev_priv, false);
+
+	intel_csr_ucode_init(dev_priv);
+
+	ret = intel_irq_install(dev_priv);
+	if (ret)
+		goto cleanup_csr;
+
+	intel_setup_gmbus(dev);
+
+	/* Important: The output setup functions called by modeset_init need
+	 * working irqs for e.g. gmbus and dp aux transfers. */
+	intel_modeset_init(dev);
+
+	intel_guc_init(dev);
+
+	ret = i915_gem_init(dev);
+	if (ret)
+		goto cleanup_irq;
+
+	intel_modeset_gem_init(dev);
+
+	if (INTEL_INFO(dev)->num_pipes == 0)
+		return 0;
+
+	ret = intel_fbdev_init(dev);
+	if (ret)
+		goto cleanup_gem;
+
+	/* Only enable hotplug handling once the fbdev is fully set up. */
+	intel_hpd_init(dev_priv);
+
+	/*
+	 * Some ports require correctly set-up hpd registers for detection to
+	 * work properly (leading to ghost connected connector status), e.g. VGA
+	 * on gm45.  Hence we can only set up the initial fbdev config after hpd
+	 * irqs are fully enabled. Now we should scan for the initial config
+	 * only once hotplug handling is enabled, but due to screwed-up locking
+	 * around kms/fbdev init we can't protect the fdbev initial config
+	 * scanning against hotplug events. Hence do this first and ignore the
+	 * tiny window where we will loose hotplug notifactions.
+	 */
+	intel_fbdev_initial_config_async(dev);
+
+	drm_kms_helper_poll_init(dev);
+
+	return 0;
+
+cleanup_gem:
+	i915_gem_fini(dev);
+cleanup_irq:
+	intel_guc_fini(dev);
+	drm_irq_uninstall(dev);
+	intel_teardown_gmbus(dev);
+cleanup_csr:
+	intel_csr_ucode_fini(dev_priv);
+	intel_power_domains_fini(dev_priv);
+	vga_switcheroo_unregister_client(dev->pdev);
+cleanup_vga_client:
+	vga_client_register(dev->pdev, NULL, NULL, NULL);
+out:
+	return ret;
+}
+
+#if IS_ENABLED(CONFIG_FB)
+static int i915_kick_out_firmware_fb(struct drm_i915_private *dev_priv)
+{
+	struct apertures_struct *ap;
+	struct pci_dev *pdev = dev_priv->dev->pdev;
+	struct i915_ggtt *ggtt = &dev_priv->ggtt;
+	bool primary;
+	int ret;
+
+	ap = alloc_apertures(1);
+	if (!ap)
+		return -ENOMEM;
+
+	ap->ranges[0].base = ggtt->mappable_base;
+	ap->ranges[0].size = ggtt->mappable_end;
+
+	primary =
+		pdev->resource[PCI_ROM_RESOURCE].flags & IORESOURCE_ROM_SHADOW;
+
+	ret = remove_conflicting_framebuffers(ap, "inteldrmfb", primary);
+
+	kfree(ap);
+
+	return ret;
+}
+#else
+static int i915_kick_out_firmware_fb(struct drm_i915_private *dev_priv)
+{
+	return 0;
+}
+#endif
+
+#if !defined(CONFIG_VGA_CONSOLE)
+static int i915_kick_out_vgacon(struct drm_i915_private *dev_priv)
+{
+	return 0;
+}
+#elif !defined(CONFIG_DUMMY_CONSOLE)
+static int i915_kick_out_vgacon(struct drm_i915_private *dev_priv)
+{
+	return -ENODEV;
+}
+#else
+static int i915_kick_out_vgacon(struct drm_i915_private *dev_priv)
+{
+	int ret = 0;
+
+	DRM_INFO("Replacing VGA console driver\n");
+
+	console_lock();
+	if (con_is_bound(&vga_con))
+		ret = do_take_over_console(&dummy_con, 0, MAX_NR_CONSOLES - 1, 1);
+	if (ret == 0) {
+		ret = do_unregister_con_driver(&vga_con);
+
+		/* Ignore "already unregistered". */
+		if (ret == -ENODEV)
+			ret = 0;
+	}
+	console_unlock();
+
+	return ret;
+}
+#endif
+
+static void i915_dump_device_info(struct drm_i915_private *dev_priv)
+{
+	const struct intel_device_info *info = &dev_priv->info;
+
+#define PRINT_S(name) "%s"
+#define SEP_EMPTY
+#define PRINT_FLAG(name) info->name ? #name "," : ""
+#define SEP_COMMA ,
+	DRM_DEBUG_DRIVER("i915 device info: gen=%i, pciid=0x%04x rev=0x%02x flags="
+			 DEV_INFO_FOR_EACH_FLAG(PRINT_S, SEP_EMPTY),
+			 info->gen,
+			 dev_priv->dev->pdev->device,
+			 dev_priv->dev->pdev->revision,
+			 DEV_INFO_FOR_EACH_FLAG(PRINT_FLAG, SEP_COMMA));
+#undef PRINT_S
+#undef SEP_EMPTY
+#undef PRINT_FLAG
+#undef SEP_COMMA
+}
+
+static void cherryview_sseu_info_init(struct drm_device *dev)
+{
+	struct drm_i915_private *dev_priv = dev->dev_private;
+	struct intel_device_info *info;
+	u32 fuse, eu_dis;
+
+	info = (struct intel_device_info *)&dev_priv->info;
+	fuse = I915_READ(CHV_FUSE_GT);
+
+	info->slice_total = 1;
+
+	if (!(fuse & CHV_FGT_DISABLE_SS0)) {
+		info->subslice_per_slice++;
+		eu_dis = fuse & (CHV_FGT_EU_DIS_SS0_R0_MASK |
+				 CHV_FGT_EU_DIS_SS0_R1_MASK);
+		info->eu_total += 8 - hweight32(eu_dis);
+	}
+
+	if (!(fuse & CHV_FGT_DISABLE_SS1)) {
+		info->subslice_per_slice++;
+		eu_dis = fuse & (CHV_FGT_EU_DIS_SS1_R0_MASK |
+				 CHV_FGT_EU_DIS_SS1_R1_MASK);
+		info->eu_total += 8 - hweight32(eu_dis);
+	}
+
+	info->subslice_total = info->subslice_per_slice;
+	/*
+	 * CHV expected to always have a uniform distribution of EU
+	 * across subslices.
+	*/
+	info->eu_per_subslice = info->subslice_total ?
+				info->eu_total / info->subslice_total :
+				0;
+	/*
+	 * CHV supports subslice power gating on devices with more than
+	 * one subslice, and supports EU power gating on devices with
+	 * more than one EU pair per subslice.
+	*/
+	info->has_slice_pg = 0;
+	info->has_subslice_pg = (info->subslice_total > 1);
+	info->has_eu_pg = (info->eu_per_subslice > 2);
+}
+
+static void gen9_sseu_info_init(struct drm_device *dev)
+{
+	struct drm_i915_private *dev_priv = dev->dev_private;
+	struct intel_device_info *info;
+	int s_max = 3, ss_max = 4, eu_max = 8;
+	int s, ss;
+	u32 fuse2, s_enable, ss_disable, eu_disable;
+	u8 eu_mask = 0xff;
+
+	info = (struct intel_device_info *)&dev_priv->info;
+	fuse2 = I915_READ(GEN8_FUSE2);
+	s_enable = (fuse2 & GEN8_F2_S_ENA_MASK) >>
+		   GEN8_F2_S_ENA_SHIFT;
+	ss_disable = (fuse2 & GEN9_F2_SS_DIS_MASK) >>
+		     GEN9_F2_SS_DIS_SHIFT;
+
+	info->slice_total = hweight32(s_enable);
+	/*
+	 * The subslice disable field is global, i.e. it applies
+	 * to each of the enabled slices.
+	*/
+	info->subslice_per_slice = ss_max - hweight32(ss_disable);
+	info->subslice_total = info->slice_total *
+			       info->subslice_per_slice;
+
+	/*
+	 * Iterate through enabled slices and subslices to
+	 * count the total enabled EU.
+	*/
+	for (s = 0; s < s_max; s++) {
+		if (!(s_enable & (0x1 << s)))
+			/* skip disabled slice */
+			continue;
+
+		eu_disable = I915_READ(GEN9_EU_DISABLE(s));
+		for (ss = 0; ss < ss_max; ss++) {
+			int eu_per_ss;
+
+			if (ss_disable & (0x1 << ss))
+				/* skip disabled subslice */
+				continue;
+
+			eu_per_ss = eu_max - hweight8((eu_disable >> (ss*8)) &
+						      eu_mask);
+
+			/*
+			 * Record which subslice(s) has(have) 7 EUs. we
+			 * can tune the hash used to spread work among
+			 * subslices if they are unbalanced.
+			 */
+			if (eu_per_ss == 7)
+				info->subslice_7eu[s] |= 1 << ss;
+
+			info->eu_total += eu_per_ss;
+		}
+	}
+
+	/*
+	 * SKL is expected to always have a uniform distribution
+	 * of EU across subslices with the exception that any one
+	 * EU in any one subslice may be fused off for die
+	 * recovery. BXT is expected to be perfectly uniform in EU
+	 * distribution.
+	*/
+	info->eu_per_subslice = info->subslice_total ?
+				DIV_ROUND_UP(info->eu_total,
+					     info->subslice_total) : 0;
+	/*
+	 * SKL supports slice power gating on devices with more than
+	 * one slice, and supports EU power gating on devices with
+	 * more than one EU pair per subslice. BXT supports subslice
+	 * power gating on devices with more than one subslice, and
+	 * supports EU power gating on devices with more than one EU
+	 * pair per subslice.
+	*/
+	info->has_slice_pg = ((IS_SKYLAKE(dev) || IS_KABYLAKE(dev)) &&
+			       (info->slice_total > 1));
+	info->has_subslice_pg = (IS_BROXTON(dev) && (info->subslice_total > 1));
+	info->has_eu_pg = (info->eu_per_subslice > 2);
+}
+
+static void broadwell_sseu_info_init(struct drm_device *dev)
+{
+	struct drm_i915_private *dev_priv = dev->dev_private;
+	struct intel_device_info *info;
+	const int s_max = 3, ss_max = 3, eu_max = 8;
+	int s, ss;
+	u32 fuse2, eu_disable[s_max], s_enable, ss_disable;
+
+	fuse2 = I915_READ(GEN8_FUSE2);
+	s_enable = (fuse2 & GEN8_F2_S_ENA_MASK) >> GEN8_F2_S_ENA_SHIFT;
+	ss_disable = (fuse2 & GEN8_F2_SS_DIS_MASK) >> GEN8_F2_SS_DIS_SHIFT;
+
+	eu_disable[0] = I915_READ(GEN8_EU_DISABLE0) & GEN8_EU_DIS0_S0_MASK;
+	eu_disable[1] = (I915_READ(GEN8_EU_DISABLE0) >> GEN8_EU_DIS0_S1_SHIFT) |
+			((I915_READ(GEN8_EU_DISABLE1) & GEN8_EU_DIS1_S1_MASK) <<
+			 (32 - GEN8_EU_DIS0_S1_SHIFT));
+	eu_disable[2] = (I915_READ(GEN8_EU_DISABLE1) >> GEN8_EU_DIS1_S2_SHIFT) |
+			((I915_READ(GEN8_EU_DISABLE2) & GEN8_EU_DIS2_S2_MASK) <<
+			 (32 - GEN8_EU_DIS1_S2_SHIFT));
+
+
+	info = (struct intel_device_info *)&dev_priv->info;
+	info->slice_total = hweight32(s_enable);
+
+	/*
+	 * The subslice disable field is global, i.e. it applies
+	 * to each of the enabled slices.
+	 */
+	info->subslice_per_slice = ss_max - hweight32(ss_disable);
+	info->subslice_total = info->slice_total * info->subslice_per_slice;
+
+	/*
+	 * Iterate through enabled slices and subslices to
+	 * count the total enabled EU.
+	 */
+	for (s = 0; s < s_max; s++) {
+		if (!(s_enable & (0x1 << s)))
+			/* skip disabled slice */
+			continue;
+
+		for (ss = 0; ss < ss_max; ss++) {
+			u32 n_disabled;
+
+			if (ss_disable & (0x1 << ss))
+				/* skip disabled subslice */
+				continue;
+
+			n_disabled = hweight8(eu_disable[s] >> (ss * eu_max));
+
+			/*
+			 * Record which subslices have 7 EUs.
+			 */
+			if (eu_max - n_disabled == 7)
+				info->subslice_7eu[s] |= 1 << ss;
+
+			info->eu_total += eu_max - n_disabled;
+		}
+	}
+
+	/*
+	 * BDW is expected to always have a uniform distribution of EU across
+	 * subslices with the exception that any one EU in any one subslice may
+	 * be fused off for die recovery.
+	 */
+	info->eu_per_subslice = info->subslice_total ?
+		DIV_ROUND_UP(info->eu_total, info->subslice_total) : 0;
+
+	/*
+	 * BDW supports slice power gating on devices with more than
+	 * one slice.
+	 */
+	info->has_slice_pg = (info->slice_total > 1);
+	info->has_subslice_pg = 0;
+	info->has_eu_pg = 0;
+}
+
+/*
+ * Determine various intel_device_info fields at runtime.
+ *
+ * Use it when either:
+ *   - it's judged too laborious to fill n static structures with the limit
+ *     when a simple if statement does the job,
+ *   - run-time checks (eg read fuse/strap registers) are needed.
+ *
+ * This function needs to be called:
+ *   - after the MMIO has been setup as we are reading registers,
+ *   - after the PCH has been detected,
+ *   - before the first usage of the fields it can tweak.
+ */
+static void intel_device_info_runtime_init(struct drm_device *dev)
+{
+	struct drm_i915_private *dev_priv = dev->dev_private;
+	struct intel_device_info *info;
+	enum pipe pipe;
+
+	info = (struct intel_device_info *)&dev_priv->info;
+
+	/*
+	 * Skylake and Broxton currently don't expose the topmost plane as its
+	 * use is exclusive with the legacy cursor and we only want to expose
+	 * one of those, not both. Until we can safely expose the topmost plane
+	 * as a DRM_PLANE_TYPE_CURSOR with all the features exposed/supported,
+	 * we don't expose the topmost plane at all to prevent ABI breakage
+	 * down the line.
+	 */
+	if (IS_BROXTON(dev)) {
+		info->num_sprites[PIPE_A] = 2;
+		info->num_sprites[PIPE_B] = 2;
+		info->num_sprites[PIPE_C] = 1;
+	} else if (IS_VALLEYVIEW(dev) || IS_CHERRYVIEW(dev))
+		for_each_pipe(dev_priv, pipe)
+			info->num_sprites[pipe] = 2;
+	else
+		for_each_pipe(dev_priv, pipe)
+			info->num_sprites[pipe] = 1;
+
+	if (i915.disable_display) {
+		DRM_INFO("Display disabled (module parameter)\n");
+		info->num_pipes = 0;
+	} else if (info->num_pipes > 0 &&
+		   (IS_GEN7(dev_priv) || IS_GEN8(dev_priv)) &&
+		   HAS_PCH_SPLIT(dev)) {
+		u32 fuse_strap = I915_READ(FUSE_STRAP);
+		u32 sfuse_strap = I915_READ(SFUSE_STRAP);
+
+		/*
+		 * SFUSE_STRAP is supposed to have a bit signalling the display
+		 * is fused off. Unfortunately it seems that, at least in
+		 * certain cases, fused off display means that PCH display
+		 * reads don't land anywhere. In that case, we read 0s.
+		 *
+		 * On CPT/PPT, we can detect this case as SFUSE_STRAP_FUSE_LOCK
+		 * should be set when taking over after the firmware.
+		 */
+		if (fuse_strap & ILK_INTERNAL_DISPLAY_DISABLE ||
+		    sfuse_strap & SFUSE_STRAP_DISPLAY_DISABLED ||
+		    (dev_priv->pch_type == PCH_CPT &&
+		     !(sfuse_strap & SFUSE_STRAP_FUSE_LOCK))) {
+			DRM_INFO("Display fused off, disabling\n");
+			info->num_pipes = 0;
+		} else if (fuse_strap & IVB_PIPE_C_DISABLE) {
+			DRM_INFO("PipeC fused off\n");
+			info->num_pipes -= 1;
+		}
+	} else if (info->num_pipes > 0 && IS_GEN9(dev_priv)) {
+		u32 dfsm = I915_READ(SKL_DFSM);
+		u8 disabled_mask = 0;
+		bool invalid;
+		int num_bits;
+
+		if (dfsm & SKL_DFSM_PIPE_A_DISABLE)
+			disabled_mask |= BIT(PIPE_A);
+		if (dfsm & SKL_DFSM_PIPE_B_DISABLE)
+			disabled_mask |= BIT(PIPE_B);
+		if (dfsm & SKL_DFSM_PIPE_C_DISABLE)
+			disabled_mask |= BIT(PIPE_C);
+
+		num_bits = hweight8(disabled_mask);
+
+		switch (disabled_mask) {
+		case BIT(PIPE_A):
+		case BIT(PIPE_B):
+		case BIT(PIPE_A) | BIT(PIPE_B):
+		case BIT(PIPE_A) | BIT(PIPE_C):
+			invalid = true;
+			break;
+		default:
+			invalid = false;
+		}
+
+		if (num_bits > info->num_pipes || invalid)
+			DRM_ERROR("invalid pipe fuse configuration: 0x%x\n",
+				  disabled_mask);
+		else
+			info->num_pipes -= num_bits;
+	}
+
+	/* Initialize slice/subslice/EU info */
+	if (IS_CHERRYVIEW(dev))
+		cherryview_sseu_info_init(dev);
+	else if (IS_BROADWELL(dev))
+		broadwell_sseu_info_init(dev);
+	else if (INTEL_INFO(dev)->gen >= 9)
+		gen9_sseu_info_init(dev);
+
+	info->has_snoop = !info->has_llc;
+
+	/* Snooping is broken on BXT A stepping. */
+	if (IS_BXT_REVID(dev, 0, BXT_REVID_A1))
+		info->has_snoop = false;
+
+	DRM_DEBUG_DRIVER("slice total: %u\n", info->slice_total);
+	DRM_DEBUG_DRIVER("subslice total: %u\n", info->subslice_total);
+	DRM_DEBUG_DRIVER("subslice per slice: %u\n", info->subslice_per_slice);
+	DRM_DEBUG_DRIVER("EU total: %u\n", info->eu_total);
+	DRM_DEBUG_DRIVER("EU per subslice: %u\n", info->eu_per_subslice);
+	DRM_DEBUG_DRIVER("has slice power gating: %s\n",
+			 info->has_slice_pg ? "y" : "n");
+	DRM_DEBUG_DRIVER("has subslice power gating: %s\n",
+			 info->has_subslice_pg ? "y" : "n");
+	DRM_DEBUG_DRIVER("has EU power gating: %s\n",
+			 info->has_eu_pg ? "y" : "n");
+
+	i915.enable_execlists =
+		intel_sanitize_enable_execlists(dev_priv,
+					       	i915.enable_execlists);
+
+	/*
+	 * i915.enable_ppgtt is read-only, so do an early pass to validate the
+	 * user's requested state against the hardware/driver capabilities.  We
+	 * do this now so that we can print out any log messages once rather
+	 * than every time we check intel_enable_ppgtt().
+	 */
+	i915.enable_ppgtt =
+		intel_sanitize_enable_ppgtt(dev_priv, i915.enable_ppgtt);
+	DRM_DEBUG_DRIVER("ppgtt mode: %i\n", i915.enable_ppgtt);
+}
+
+static void intel_init_dpio(struct drm_i915_private *dev_priv)
+{
+	/*
+	 * IOSF_PORT_DPIO is used for VLV x2 PHY (DP/HDMI B and C),
+	 * CHV x1 PHY (DP/HDMI D)
+	 * IOSF_PORT_DPIO_2 is used for CHV x2 PHY (DP/HDMI B and C)
+	 */
+	if (IS_CHERRYVIEW(dev_priv)) {
+		DPIO_PHY_IOSF_PORT(DPIO_PHY0) = IOSF_PORT_DPIO_2;
+		DPIO_PHY_IOSF_PORT(DPIO_PHY1) = IOSF_PORT_DPIO;
+	} else if (IS_VALLEYVIEW(dev_priv)) {
+		DPIO_PHY_IOSF_PORT(DPIO_PHY0) = IOSF_PORT_DPIO;
+	}
+}
+
+static int i915_workqueues_init(struct drm_i915_private *dev_priv)
+{
+	/*
+	 * The i915 workqueue is primarily used for batched retirement of
+	 * requests (and thus managing bo) once the task has been completed
+	 * by the GPU. i915_gem_retire_requests() is called directly when we
+	 * need high-priority retirement, such as waiting for an explicit
+	 * bo.
+	 *
+	 * It is also used for periodic low-priority events, such as
+	 * idle-timers and recording error state.
+	 *
+	 * All tasks on the workqueue are expected to acquire the dev mutex
+	 * so there is no point in running more than one instance of the
+	 * workqueue at any time.  Use an ordered one.
+	 */
+	dev_priv->wq = alloc_ordered_workqueue("i915", 0);
+	if (dev_priv->wq == NULL)
+		goto out_err;
+
+	dev_priv->hotplug.dp_wq = alloc_ordered_workqueue("i915-dp", 0);
+	if (dev_priv->hotplug.dp_wq == NULL)
+		goto out_free_wq;
+
+	dev_priv->gpu_error.hangcheck_wq =
+		alloc_ordered_workqueue("i915-hangcheck", 0);
+	if (dev_priv->gpu_error.hangcheck_wq == NULL)
+		goto out_free_dp_wq;
+
+	return 0;
+
+out_free_dp_wq:
+	destroy_workqueue(dev_priv->hotplug.dp_wq);
+out_free_wq:
+	destroy_workqueue(dev_priv->wq);
+out_err:
+	DRM_ERROR("Failed to allocate workqueues.\n");
+
+	return -ENOMEM;
+}
+
+static void i915_workqueues_cleanup(struct drm_i915_private *dev_priv)
+{
+	destroy_workqueue(dev_priv->gpu_error.hangcheck_wq);
+	destroy_workqueue(dev_priv->hotplug.dp_wq);
+	destroy_workqueue(dev_priv->wq);
+}
+
+/**
+ * i915_driver_init_early - setup state not requiring device access
+ * @dev_priv: device private
+ *
+ * Initialize everything that is a "SW-only" state, that is state not
+ * requiring accessing the device or exposing the driver via kernel internal
+ * or userspace interfaces. Example steps belonging here: lock initialization,
+ * system memory allocation, setting up device specific attributes and
+ * function hooks not requiring accessing the device.
+ */
+static int i915_driver_init_early(struct drm_i915_private *dev_priv,
+				  const struct pci_device_id *ent)
+{
+	const struct intel_device_info *match_info =
+		(struct intel_device_info *)ent->driver_data;
+	struct intel_device_info *device_info;
+	int ret = 0;
+
+	if (i915_inject_load_failure())
+		return -ENODEV;
+
+	/* Setup the write-once "constant" device info */
+	device_info = (struct intel_device_info *)&dev_priv->info;
+	memcpy(device_info, match_info, sizeof(*device_info));
+	device_info->device_id = dev_priv->drm.pdev->device;
+
+	BUG_ON(device_info->gen > sizeof(device_info->gen_mask) * BITS_PER_BYTE);
+	device_info->gen_mask = BIT(device_info->gen - 1);
+
+	spin_lock_init(&dev_priv->irq_lock);
+	spin_lock_init(&dev_priv->gpu_error.lock);
+	mutex_init(&dev_priv->backlight_lock);
+	spin_lock_init(&dev_priv->uncore.lock);
+	spin_lock_init(&dev_priv->mm.object_stat_lock);
+	spin_lock_init(&dev_priv->mmio_flip_lock);
+	mutex_init(&dev_priv->sb_lock);
+	mutex_init(&dev_priv->modeset_restore_lock);
+	mutex_init(&dev_priv->av_mutex);
+	mutex_init(&dev_priv->wm.wm_mutex);
+	mutex_init(&dev_priv->pps_mutex);
+
+	ret = i915_workqueues_init(dev_priv);
+	if (ret < 0)
+		return ret;
+
+	/* This must be called before any calls to HAS_PCH_* */
+	intel_detect_pch(&dev_priv->drm);
+
+	intel_pm_setup(&dev_priv->drm);
+	intel_init_dpio(dev_priv);
+	intel_power_domains_init(dev_priv);
+	intel_irq_init(dev_priv);
+	intel_init_display_hooks(dev_priv);
+	intel_init_clock_gating_hooks(dev_priv);
+	intel_init_audio_hooks(dev_priv);
+	i915_gem_load_init(&dev_priv->drm);
+
+	intel_display_crc_init(&dev_priv->drm);
+
+	i915_dump_device_info(dev_priv);
+
+	/* Not all pre-production machines fall into this category, only the
+	 * very first ones. Almost everything should work, except for maybe
+	 * suspend/resume. And we don't implement workarounds that affect only
+	 * pre-production machines. */
+	if (IS_HSW_EARLY_SDV(dev_priv))
+		DRM_INFO("This is an early pre-production Haswell machine. "
+			 "It may not be fully functional.\n");
+
+	return 0;
+}
+
+/**
+ * i915_driver_cleanup_early - cleanup the setup done in i915_driver_init_early()
+ * @dev_priv: device private
+ */
+static void i915_driver_cleanup_early(struct drm_i915_private *dev_priv)
+{
+	i915_gem_load_cleanup(dev_priv->dev);
+	i915_workqueues_cleanup(dev_priv);
+}
+
+static int i915_mmio_setup(struct drm_device *dev)
+{
+	struct drm_i915_private *dev_priv = to_i915(dev);
+	int mmio_bar;
+	int mmio_size;
+
+	mmio_bar = IS_GEN2(dev) ? 1 : 0;
+	/*
+	 * Before gen4, the registers and the GTT are behind different BARs.
+	 * However, from gen4 onwards, the registers and the GTT are shared
+	 * in the same BAR, so we want to restrict this ioremap from
+	 * clobbering the GTT which we want ioremap_wc instead. Fortunately,
+	 * the register BAR remains the same size for all the earlier
+	 * generations up to Ironlake.
+	 */
+	if (INTEL_INFO(dev)->gen < 5)
+		mmio_size = 512 * 1024;
+	else
+		mmio_size = 2 * 1024 * 1024;
+	dev_priv->regs = pci_iomap(dev->pdev, mmio_bar, mmio_size);
+	if (dev_priv->regs == NULL) {
+		DRM_ERROR("failed to map registers\n");
+
+		return -EIO;
+	}
+
+	/* Try to make sure MCHBAR is enabled before poking at it */
+	intel_setup_mchbar(dev);
+
+	return 0;
+}
+
+static void i915_mmio_cleanup(struct drm_device *dev)
+{
+	struct drm_i915_private *dev_priv = to_i915(dev);
+
+	intel_teardown_mchbar(dev);
+	pci_iounmap(dev->pdev, dev_priv->regs);
+}
+
+/**
+ * i915_driver_init_mmio - setup device MMIO
+ * @dev_priv: device private
+ *
+ * Setup minimal device state necessary for MMIO accesses later in the
+ * initialization sequence. The setup here should avoid any other device-wide
+ * side effects or exposing the driver via kernel internal or user space
+ * interfaces.
+ */
+static int i915_driver_init_mmio(struct drm_i915_private *dev_priv)
+{
+	struct drm_device *dev = dev_priv->dev;
+	int ret;
+
+	if (i915_inject_load_failure())
+		return -ENODEV;
+
+	if (i915_get_bridge_dev(dev))
+		return -EIO;
+
+	ret = i915_mmio_setup(dev);
+	if (ret < 0)
+		goto put_bridge;
+
+	intel_uncore_init(dev_priv);
+
+	return 0;
+
+put_bridge:
+	pci_dev_put(dev_priv->bridge_dev);
+
+	return ret;
+}
+
+/**
+ * i915_driver_cleanup_mmio - cleanup the setup done in i915_driver_init_mmio()
+ * @dev_priv: device private
+ */
+static void i915_driver_cleanup_mmio(struct drm_i915_private *dev_priv)
+{
+	struct drm_device *dev = dev_priv->dev;
+
+	intel_uncore_fini(dev_priv);
+	i915_mmio_cleanup(dev);
+	pci_dev_put(dev_priv->bridge_dev);
+}
+
+/**
+ * i915_driver_init_hw - setup state requiring device access
+ * @dev_priv: device private
+ *
+ * Setup state that requires accessing the device, but doesn't require
+ * exposing the driver via kernel internal or userspace interfaces.
+ */
+static int i915_driver_init_hw(struct drm_i915_private *dev_priv)
+{
+	struct drm_device *dev = dev_priv->dev;
+	struct i915_ggtt *ggtt = &dev_priv->ggtt;
+	uint32_t aperture_size;
+	int ret;
+
+	if (i915_inject_load_failure())
+		return -ENODEV;
+
+	intel_device_info_runtime_init(dev);
+
+	ret = i915_ggtt_init_hw(dev);
+	if (ret)
+		return ret;
+
+	ret = i915_ggtt_enable_hw(dev);
+	if (ret) {
+		DRM_ERROR("failed to enable GGTT\n");
+		goto out_ggtt;
+	}
+
+	/* WARNING: Apparently we must kick fbdev drivers before vgacon,
+	 * otherwise the vga fbdev driver falls over. */
+	ret = i915_kick_out_firmware_fb(dev_priv);
+	if (ret) {
+		DRM_ERROR("failed to remove conflicting framebuffer drivers\n");
+		goto out_ggtt;
+	}
+
+	ret = i915_kick_out_vgacon(dev_priv);
+	if (ret) {
+		DRM_ERROR("failed to remove conflicting VGA console\n");
+		goto out_ggtt;
+	}
+
+	pci_set_master(dev->pdev);
+
+	/* overlay on gen2 is broken and can't address above 1G */
+	if (IS_GEN2(dev)) {
+		ret = dma_set_coherent_mask(&dev->pdev->dev, DMA_BIT_MASK(30));
+		if (ret) {
+			DRM_ERROR("failed to set DMA mask\n");
+
+			goto out_ggtt;
+		}
+	}
+
+
+	/* 965GM sometimes incorrectly writes to hardware status page (HWS)
+	 * using 32bit addressing, overwriting memory if HWS is located
+	 * above 4GB.
+	 *
+	 * The documentation also mentions an issue with undefined
+	 * behaviour if any general state is accessed within a page above 4GB,
+	 * which also needs to be handled carefully.
+	 */
+	if (IS_BROADWATER(dev) || IS_CRESTLINE(dev)) {
+		ret = dma_set_coherent_mask(&dev->pdev->dev, DMA_BIT_MASK(32));
+
+		if (ret) {
+			DRM_ERROR("failed to set DMA mask\n");
+
+			goto out_ggtt;
+		}
+	}
+
+	aperture_size = ggtt->mappable_end;
+
+	ggtt->mappable =
+		io_mapping_create_wc(ggtt->mappable_base,
+				     aperture_size);
+	if (!ggtt->mappable) {
+		ret = -EIO;
+		goto out_ggtt;
+	}
+
+	ggtt->mtrr = arch_phys_wc_add(ggtt->mappable_base,
+					      aperture_size);
+
+	pm_qos_add_request(&dev_priv->pm_qos, PM_QOS_CPU_DMA_LATENCY,
+			   PM_QOS_DEFAULT_VALUE);
+
+	intel_uncore_sanitize(dev_priv);
+
+	intel_opregion_setup(dev_priv);
+
+	i915_gem_load_init_fences(dev_priv);
+
+	/* On the 945G/GM, the chipset reports the MSI capability on the
+	 * integrated graphics even though the support isn't actually there
+	 * according to the published specs.  It doesn't appear to function
+	 * correctly in testing on 945G.
+	 * This may be a side effect of MSI having been made available for PEG
+	 * and the registers being closely associated.
+	 *
+	 * According to chipset errata, on the 965GM, MSI interrupts may
+	 * be lost or delayed, but we use them anyways to avoid
+	 * stuck interrupts on some machines.
+	 */
+	if (!IS_I945G(dev) && !IS_I945GM(dev)) {
+		if (pci_enable_msi(dev->pdev) < 0)
+			DRM_DEBUG_DRIVER("can't enable MSI");
+	}
+
+	return 0;
+
+out_ggtt:
+	i915_ggtt_cleanup_hw(dev);
+
+	return ret;
+}
+
+/**
+ * i915_driver_cleanup_hw - cleanup the setup done in i915_driver_init_hw()
+ * @dev_priv: device private
+ */
+static void i915_driver_cleanup_hw(struct drm_i915_private *dev_priv)
+{
+	struct drm_device *dev = dev_priv->dev;
+	struct i915_ggtt *ggtt = &dev_priv->ggtt;
+
+	if (dev->pdev->msi_enabled)
+		pci_disable_msi(dev->pdev);
+
+	pm_qos_remove_request(&dev_priv->pm_qos);
+	arch_phys_wc_del(ggtt->mtrr);
+	io_mapping_free(ggtt->mappable);
+	i915_ggtt_cleanup_hw(dev);
+}
+
+/**
+ * i915_driver_register - register the driver with the rest of the system
+ * @dev_priv: device private
+ *
+ * Perform any steps necessary to make the driver available via kernel
+ * internal or userspace interfaces.
+ */
+static void i915_driver_register(struct drm_i915_private *dev_priv)
+{
+	struct drm_device *dev = dev_priv->dev;
+
+	i915_gem_shrinker_init(dev_priv);
 
-static const struct intel_device_info intel_broxton_info = {
-	.is_preliminary = 1,
-	.is_broxton = 1,
-	.gen = 9,
-	.need_gfx_hws = 1, .has_hotplug = 1,
-	.ring_mask = RENDER_RING | BSD_RING | BLT_RING | VEBOX_RING,
-	.num_pipes = 3,
-	.has_ddi = 1,
-	.has_fpga_dbg = 1,
-	.has_fbc = 1,
-	GEN_DEFAULT_PIPEOFFSETS,
-	IVB_CURSOR_OFFSETS,
-	BDW_COLORS,
-};
+	/*
+	 * Notify a valid surface after modesetting,
+	 * when running inside a VM.
+	 */
+	if (intel_vgpu_active(dev_priv))
+		I915_WRITE(vgtif_reg(display_ready), VGT_DRV_DISPLAY_READY);
+
+	/* Reveal our presence to userspace */
+	if (drm_dev_register(dev, 0) == 0) {
+		i915_debugfs_register(dev_priv);
+		i915_setup_sysfs(dev);
+		intel_modeset_register(dev_priv);
+	} else
+		DRM_ERROR("Failed to register driver for userspace access!\n");
+
+	if (INTEL_INFO(dev_priv)->num_pipes) {
+		/* Must be done after probing outputs */
+		intel_opregion_register(dev_priv);
+		acpi_video_register();
+	}
 
-static const struct intel_device_info intel_kabylake_info = {
-	BDW_FEATURES,
-	.is_kabylake = 1,
-	.gen = 9,
-};
+	if (IS_GEN5(dev_priv))
+		intel_gpu_ips_init(dev_priv);
 
-static const struct intel_device_info intel_kabylake_gt3_info = {
-	BDW_FEATURES,
-	.is_kabylake = 1,
-	.gen = 9,
-	.ring_mask = RENDER_RING | BSD_RING | BLT_RING | VEBOX_RING | BSD2_RING,
-};
+	i915_audio_component_init(dev_priv);
 
-/*
- * Make sure any device matches here are from most specific to most
- * general.  For example, since the Quanta match is based on the subsystem
- * and subvendor IDs, we need it to come before the more general IVB
- * PCI ID matches, otherwise we'll use the wrong info struct above.
+	/*
+	 * Some ports require correctly set-up hpd registers for detection to
+	 * work properly (leading to ghost connected connector status), e.g. VGA
+	 * on gm45.  Hence we can only set up the initial fbdev config after hpd
+	 * irqs are fully enabled. Now we should scan for the initial config
+	 * only once hotplug handling is enabled, but due to screwed-up locking
+	 * around kms/fbdev init we can't protect the fdbev initial config
+	 * scanning against hotplug events. Hence do this first and ignore the
+	 * tiny window where we will loose hotplug notifactions.
+	 */
+	intel_fbdev_initial_config_async(dev);
+}
+
+/**
+ * i915_driver_unregister - cleanup the registration done in i915_driver_regiser()
+ * @dev_priv: device private
  */
-static const struct pci_device_id pciidlist[] = {
-	INTEL_I830_IDS(&intel_i830_info),
-	INTEL_I845G_IDS(&intel_845g_info),
-	INTEL_I85X_IDS(&intel_i85x_info),
-	INTEL_I865G_IDS(&intel_i865g_info),
-	INTEL_I915G_IDS(&intel_i915g_info),
-	INTEL_I915GM_IDS(&intel_i915gm_info),
-	INTEL_I945G_IDS(&intel_i945g_info),
-	INTEL_I945GM_IDS(&intel_i945gm_info),
-	INTEL_I965G_IDS(&intel_i965g_info),
-	INTEL_G33_IDS(&intel_g33_info),
-	INTEL_I965GM_IDS(&intel_i965gm_info),
-	INTEL_GM45_IDS(&intel_gm45_info),
-	INTEL_G45_IDS(&intel_g45_info),
-	INTEL_PINEVIEW_IDS(&intel_pineview_info),
-	INTEL_IRONLAKE_D_IDS(&intel_ironlake_d_info),
-	INTEL_IRONLAKE_M_IDS(&intel_ironlake_m_info),
-	INTEL_SNB_D_IDS(&intel_sandybridge_d_info),
-	INTEL_SNB_M_IDS(&intel_sandybridge_m_info),
-	INTEL_IVB_Q_IDS(&intel_ivybridge_q_info), /* must be first IVB */
-	INTEL_IVB_M_IDS(&intel_ivybridge_m_info),
-	INTEL_IVB_D_IDS(&intel_ivybridge_d_info),
-	INTEL_HSW_D_IDS(&intel_haswell_d_info),
-	INTEL_HSW_M_IDS(&intel_haswell_m_info),
-	INTEL_VLV_M_IDS(&intel_valleyview_m_info),
-	INTEL_VLV_D_IDS(&intel_valleyview_d_info),
-	INTEL_BDW_GT12M_IDS(&intel_broadwell_m_info),
-	INTEL_BDW_GT12D_IDS(&intel_broadwell_d_info),
-	INTEL_BDW_GT3M_IDS(&intel_broadwell_gt3m_info),
-	INTEL_BDW_GT3D_IDS(&intel_broadwell_gt3d_info),
-	INTEL_CHV_IDS(&intel_cherryview_info),
-	INTEL_SKL_GT1_IDS(&intel_skylake_info),
-	INTEL_SKL_GT2_IDS(&intel_skylake_info),
-	INTEL_SKL_GT3_IDS(&intel_skylake_gt3_info),
-	INTEL_SKL_GT4_IDS(&intel_skylake_gt3_info),
-	INTEL_BXT_IDS(&intel_broxton_info),
-	INTEL_KBL_GT1_IDS(&intel_kabylake_info),
-	INTEL_KBL_GT2_IDS(&intel_kabylake_info),
-	INTEL_KBL_GT3_IDS(&intel_kabylake_gt3_info),
-	INTEL_KBL_GT4_IDS(&intel_kabylake_gt3_info),
-	{0, 0, 0}
-};
+static void i915_driver_unregister(struct drm_i915_private *dev_priv)
+{
+	i915_audio_component_cleanup(dev_priv);
 
-MODULE_DEVICE_TABLE(pci, pciidlist);
+	intel_gpu_ips_teardown();
+	acpi_video_unregister();
+	intel_opregion_unregister(dev_priv);
 
-static enum intel_pch intel_virt_detect_pch(struct drm_device *dev)
+	intel_modeset_unregister(dev_priv);
+	i915_teardown_sysfs(dev_priv->dev);
+	i915_debugfs_unregister(dev_priv);
+	drm_dev_unregister(dev_priv->dev);
+
+	i915_gem_shrinker_cleanup(dev_priv);
+}
+
+/**
+ * i915_driver_load - setup chip and create an initial config
+ * @dev: DRM device
+ * @flags: startup flags
+ *
+ * The driver load routine has to do several things:
+ *   - drive output discovery via intel_modeset_init()
+ *   - initialize the memory manager
+ *   - allocate initial config memory
+ *   - setup the DRM framebuffer with the allocated memory
+ */
+static int i915_driver_load(struct pci_dev *pdev,
+			    const struct pci_device_id *ent)
 {
-	enum intel_pch ret = PCH_NOP;
+	struct drm_i915_private *dev_priv;
+	int ret;
+
+	dev_priv = kzalloc(sizeof(*dev_priv), GFP_KERNEL);
+	if (dev_priv == NULL)
+		return -ENOMEM;
+
+	ret = drm_dev_init(&dev_priv->drm, &driver, &pdev->dev);
+	if (ret)
+		goto out_free_priv;
+
+	/* Must be set before calling __i915_printk */
+	dev_priv->drm.pdev = pdev;
+	dev_priv->drm.dev_private = dev_priv;
+	dev_priv->dev = &dev_priv->drm;
+
+	ret = i915_driver_init_early(dev_priv, ent);
+	if (ret < 0)
+		goto out_free_priv;
+
+	ret = pci_enable_device(pdev);
+	if (ret)
+		goto out_cleanup_early;
+
+	pci_set_drvdata(pdev, &dev_priv->drm);
+
+	intel_runtime_pm_get(dev_priv);
+
+	ret = i915_driver_init_mmio(dev_priv);
+	if (ret < 0)
+		goto out_runtime_pm_put;
+
+	ret = i915_driver_init_hw(dev_priv);
+	if (ret < 0)
+		goto out_cleanup_mmio;
 
 	/*
-	 * In a virtualized passthrough environment we can be in a
-	 * setup where the ISA bridge is not able to be passed through.
-	 * In this case, a south bridge can be emulated and we have to
-	 * make an educated guess as to which PCH is really there.
+	 * TODO: move the vblank init and parts of modeset init steps into one
+	 * of the i915_driver_init_/i915_driver_register functions according
+	 * to the role/effect of the given init step.
 	 */
-
-	if (IS_GEN5(dev)) {
-		ret = PCH_IBX;
-		DRM_DEBUG_KMS("Assuming Ibex Peak PCH\n");
-	} else if (IS_GEN6(dev) || IS_IVYBRIDGE(dev)) {
-		ret = PCH_CPT;
-		DRM_DEBUG_KMS("Assuming CouarPoint PCH\n");
-	} else if (IS_HASWELL(dev) || IS_BROADWELL(dev)) {
-		ret = PCH_LPT;
-		DRM_DEBUG_KMS("Assuming LynxPoint PCH\n");
-	} else if (IS_SKYLAKE(dev) || IS_KABYLAKE(dev)) {
-		ret = PCH_SPT;
-		DRM_DEBUG_KMS("Assuming SunrisePoint PCH\n");
+	if (INTEL_INFO(dev_priv)->num_pipes) {
+		ret = drm_vblank_init(dev_priv->dev,
+				      INTEL_INFO(dev_priv)->num_pipes);
+		if (ret)
+			goto out_cleanup_hw;
 	}
 
+	ret = i915_load_modeset_init(dev_priv->dev);
+	if (ret < 0)
+		goto out_cleanup_vblank;
+
+	i915_driver_register(dev_priv);
+
+	intel_runtime_pm_enable(dev_priv);
+
+	intel_runtime_pm_put(dev_priv);
+
+	return 0;
+
+out_cleanup_vblank:
+	drm_vblank_cleanup(dev_priv->dev);
+out_cleanup_hw:
+	i915_driver_cleanup_hw(dev_priv);
+out_cleanup_mmio:
+	i915_driver_cleanup_mmio(dev_priv);
+out_runtime_pm_put:
+	intel_runtime_pm_put(dev_priv);
+	pci_disable_device(pdev);
+out_cleanup_early:
+	i915_driver_cleanup_early(dev_priv);
+out_free_priv:
+	i915_load_error(dev_priv, "Device initialization failed (%d)\n", ret);
+
+	kfree(dev_priv);
+
 	return ret;
 }
 
-void intel_detect_pch(struct drm_device *dev)
+static int i915_driver_unload(struct drm_device *dev)
 {
 	struct drm_i915_private *dev_priv = dev->dev_private;
-	struct pci_dev *pch = NULL;
+	int ret;
 
-	/* In all current cases, num_pipes is equivalent to the PCH_NOP setting
-	 * (which really amounts to a PCH but no South Display).
-	 */
-	if (INTEL_INFO(dev)->num_pipes == 0) {
-		dev_priv->pch_type = PCH_NOP;
-		return;
+	intel_fbdev_fini(dev);
+
+	ret = i915_gem_suspend(dev);
+	if (ret) {
+		DRM_ERROR("failed to idle hardware: %d\n", ret);
+		return ret;
 	}
 
+	intel_display_power_get(dev_priv, POWER_DOMAIN_INIT);
+
+	i915_driver_unregister(dev_priv);
+
+	drm_vblank_cleanup(dev);
+
+	intel_modeset_cleanup(dev);
+
 	/*
-	 * The reason to probe ISA bridge instead of Dev31:Fun0 is to
-	 * make graphics device passthrough work easy for VMM, that only
-	 * need to expose ISA bridge to let driver know the real hardware
-	 * underneath. This is a requirement from virtualization team.
-	 *
-	 * In some virtualized environments (e.g. XEN), there is irrelevant
-	 * ISA bridge in the system. To work reliably, we should scan trhough
-	 * all the ISA bridge devices and check for the first match, instead
-	 * of only checking the first one.
+	 * free the memory space allocated for the child device
+	 * config parsed from VBT
 	 */
-	while ((pch = pci_get_class(PCI_CLASS_BRIDGE_ISA << 8, pch))) {
-		if (pch->vendor == PCI_VENDOR_ID_INTEL) {
-			unsigned short id = pch->device & INTEL_PCH_DEVICE_ID_MASK;
-			dev_priv->pch_id = id;
+	if (dev_priv->vbt.child_dev && dev_priv->vbt.child_dev_num) {
+		kfree(dev_priv->vbt.child_dev);
+		dev_priv->vbt.child_dev = NULL;
+		dev_priv->vbt.child_dev_num = 0;
+	}
+	kfree(dev_priv->vbt.sdvo_lvds_vbt_mode);
+	dev_priv->vbt.sdvo_lvds_vbt_mode = NULL;
+	kfree(dev_priv->vbt.lfp_lvds_vbt_mode);
+	dev_priv->vbt.lfp_lvds_vbt_mode = NULL;
 
-			if (id == INTEL_PCH_IBX_DEVICE_ID_TYPE) {
-				dev_priv->pch_type = PCH_IBX;
-				DRM_DEBUG_KMS("Found Ibex Peak PCH\n");
-				WARN_ON(!IS_GEN5(dev));
-			} else if (id == INTEL_PCH_CPT_DEVICE_ID_TYPE) {
-				dev_priv->pch_type = PCH_CPT;
-				DRM_DEBUG_KMS("Found CougarPoint PCH\n");
-				WARN_ON(!(IS_GEN6(dev) || IS_IVYBRIDGE(dev)));
-			} else if (id == INTEL_PCH_PPT_DEVICE_ID_TYPE) {
-				/* PantherPoint is CPT compatible */
-				dev_priv->pch_type = PCH_CPT;
-				DRM_DEBUG_KMS("Found PantherPoint PCH\n");
-				WARN_ON(!(IS_GEN6(dev) || IS_IVYBRIDGE(dev)));
-			} else if (id == INTEL_PCH_LPT_DEVICE_ID_TYPE) {
-				dev_priv->pch_type = PCH_LPT;
-				DRM_DEBUG_KMS("Found LynxPoint PCH\n");
-				WARN_ON(!IS_HASWELL(dev) && !IS_BROADWELL(dev));
-				WARN_ON(IS_HSW_ULT(dev) || IS_BDW_ULT(dev));
-			} else if (id == INTEL_PCH_LPT_LP_DEVICE_ID_TYPE) {
-				dev_priv->pch_type = PCH_LPT;
-				DRM_DEBUG_KMS("Found LynxPoint LP PCH\n");
-				WARN_ON(!IS_HASWELL(dev) && !IS_BROADWELL(dev));
-				WARN_ON(!IS_HSW_ULT(dev) && !IS_BDW_ULT(dev));
-			} else if (id == INTEL_PCH_SPT_DEVICE_ID_TYPE) {
-				dev_priv->pch_type = PCH_SPT;
-				DRM_DEBUG_KMS("Found SunrisePoint PCH\n");
-				WARN_ON(!IS_SKYLAKE(dev) &&
-					!IS_KABYLAKE(dev));
-			} else if (id == INTEL_PCH_SPT_LP_DEVICE_ID_TYPE) {
-				dev_priv->pch_type = PCH_SPT;
-				DRM_DEBUG_KMS("Found SunrisePoint LP PCH\n");
-				WARN_ON(!IS_SKYLAKE(dev) &&
-					!IS_KABYLAKE(dev));
-			} else if ((id == INTEL_PCH_P2X_DEVICE_ID_TYPE) ||
-				   (id == INTEL_PCH_P3X_DEVICE_ID_TYPE) ||
-				   ((id == INTEL_PCH_QEMU_DEVICE_ID_TYPE) &&
-				    pch->subsystem_vendor == 0x1af4 &&
-				    pch->subsystem_device == 0x1100)) {
-				dev_priv->pch_type = intel_virt_detect_pch(dev);
-			} else
-				continue;
+	vga_switcheroo_unregister_client(dev->pdev);
+	vga_client_register(dev->pdev, NULL, NULL, NULL);
 
-			break;
-		}
-	}
-	if (!pch)
-		DRM_DEBUG_KMS("No PCH found.\n");
+	intel_csr_ucode_fini(dev_priv);
 
-	pci_dev_put(pch);
+	/* Free error state after interrupts are fully disabled. */
+	cancel_delayed_work_sync(&dev_priv->gpu_error.hangcheck_work);
+	i915_destroy_error_state(dev);
+
+	/* Flush any outstanding unpin_work. */
+	flush_workqueue(dev_priv->wq);
+
+	intel_guc_fini(dev);
+	i915_gem_fini(dev);
+	intel_fbc_cleanup_cfb(dev_priv);
+
+	intel_power_domains_fini(dev_priv);
+
+	i915_driver_cleanup_hw(dev_priv);
+	i915_driver_cleanup_mmio(dev_priv);
+
+	intel_display_power_put(dev_priv, POWER_DOMAIN_INIT);
+
+	i915_driver_cleanup_early(dev_priv);
+
+	return 0;
 }
 
-bool i915_semaphore_is_enabled(struct drm_i915_private *dev_priv)
+static int i915_driver_open(struct drm_device *dev, struct drm_file *file)
 {
-	if (INTEL_GEN(dev_priv) < 6)
-		return false;
+	int ret;
 
-	if (i915.semaphores >= 0)
-		return i915.semaphores;
+	ret = i915_gem_open(dev, file);
+	if (ret)
+		return ret;
 
-	/* TODO: make semaphores and Execlists play nicely together */
-	if (i915.enable_execlists)
-		return false;
+	return 0;
+}
 
-#ifdef CONFIG_INTEL_IOMMU
-	/* Enable semaphores on SNB when IO remapping is off */
-	if (IS_GEN6(dev_priv) && intel_iommu_gfx_mapped)
-		return false;
-#endif
+/**
+ * i915_driver_lastclose - clean up after all DRM clients have exited
+ * @dev: DRM device
+ *
+ * Take care of cleaning up after all DRM clients have exited.  In the
+ * mode setting case, we want to restore the kernel's initial mode (just
+ * in case the last client left us in a bad state).
+ *
+ * Additionally, in the non-mode setting case, we'll tear down the GTT
+ * and DMA structures, since the kernel won't be using them, and clea
+ * up any GEM state.
+ */
+static void i915_driver_lastclose(struct drm_device *dev)
+{
+	intel_fbdev_restore_mode(dev);
+	vga_switcheroo_process_delayed_switch();
+}
 
-	return true;
+static void i915_driver_preclose(struct drm_device *dev, struct drm_file *file)
+{
+	mutex_lock(&dev->struct_mutex);
+	i915_gem_context_close(dev, file);
+	i915_gem_release(dev, file);
+	mutex_unlock(&dev->struct_mutex);
+}
+
+static void i915_driver_postclose(struct drm_device *dev, struct drm_file *file)
+{
+	struct drm_i915_file_private *file_priv = file->driver_priv;
+
+	kfree(file_priv);
 }
 
 static void intel_suspend_encoders(struct drm_i915_private *dev_priv)
@@ -1039,7 +2624,7 @@ static int i915_pci_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
 	    !vga_switcheroo_handler_flags())
 		return -EPROBE_DEFER;
 
-	return i915_driver_load(pdev, ent, &driver);
+	return i915_driver_load(pdev, ent);
 }
 
 static void
@@ -1747,6 +3332,68 @@ static const struct file_operations i915_driver_fops = {
 	.llseek = noop_llseek,
 };
 
+static int
+i915_gem_reject_pin_ioctl(struct drm_device *dev, void *data,
+			  struct drm_file *file)
+{
+	return -ENODEV;
+}
+
+static const struct drm_ioctl_desc i915_ioctls[] = {
+	DRM_IOCTL_DEF_DRV(I915_INIT, drm_noop, DRM_AUTH|DRM_MASTER|DRM_ROOT_ONLY),
+	DRM_IOCTL_DEF_DRV(I915_FLUSH, drm_noop, DRM_AUTH),
+	DRM_IOCTL_DEF_DRV(I915_FLIP, drm_noop, DRM_AUTH),
+	DRM_IOCTL_DEF_DRV(I915_BATCHBUFFER, drm_noop, DRM_AUTH),
+	DRM_IOCTL_DEF_DRV(I915_IRQ_EMIT, drm_noop, DRM_AUTH),
+	DRM_IOCTL_DEF_DRV(I915_IRQ_WAIT, drm_noop, DRM_AUTH),
+	DRM_IOCTL_DEF_DRV(I915_GETPARAM, i915_getparam, DRM_AUTH|DRM_RENDER_ALLOW),
+	DRM_IOCTL_DEF_DRV(I915_SETPARAM, drm_noop, DRM_AUTH|DRM_MASTER|DRM_ROOT_ONLY),
+	DRM_IOCTL_DEF_DRV(I915_ALLOC, drm_noop, DRM_AUTH),
+	DRM_IOCTL_DEF_DRV(I915_FREE, drm_noop, DRM_AUTH),
+	DRM_IOCTL_DEF_DRV(I915_INIT_HEAP, drm_noop, DRM_AUTH|DRM_MASTER|DRM_ROOT_ONLY),
+	DRM_IOCTL_DEF_DRV(I915_CMDBUFFER, drm_noop, DRM_AUTH),
+	DRM_IOCTL_DEF_DRV(I915_DESTROY_HEAP,  drm_noop, DRM_AUTH|DRM_MASTER|DRM_ROOT_ONLY),
+	DRM_IOCTL_DEF_DRV(I915_SET_VBLANK_PIPE,  drm_noop, DRM_AUTH|DRM_MASTER|DRM_ROOT_ONLY),
+	DRM_IOCTL_DEF_DRV(I915_GET_VBLANK_PIPE,  drm_noop, DRM_AUTH),
+	DRM_IOCTL_DEF_DRV(I915_VBLANK_SWAP, drm_noop, DRM_AUTH),
+	DRM_IOCTL_DEF_DRV(I915_HWS_ADDR, drm_noop, DRM_AUTH|DRM_MASTER|DRM_ROOT_ONLY),
+	DRM_IOCTL_DEF_DRV(I915_GEM_INIT, drm_noop, DRM_AUTH|DRM_MASTER|DRM_ROOT_ONLY),
+	DRM_IOCTL_DEF_DRV(I915_GEM_EXECBUFFER, i915_gem_execbuffer, DRM_AUTH),
+	DRM_IOCTL_DEF_DRV(I915_GEM_EXECBUFFER2, i915_gem_execbuffer2, DRM_AUTH|DRM_RENDER_ALLOW),
+	DRM_IOCTL_DEF_DRV(I915_GEM_PIN, i915_gem_reject_pin_ioctl, DRM_AUTH|DRM_ROOT_ONLY),
+	DRM_IOCTL_DEF_DRV(I915_GEM_UNPIN, i915_gem_reject_pin_ioctl, DRM_AUTH|DRM_ROOT_ONLY),
+	DRM_IOCTL_DEF_DRV(I915_GEM_BUSY, i915_gem_busy_ioctl, DRM_AUTH|DRM_RENDER_ALLOW),
+	DRM_IOCTL_DEF_DRV(I915_GEM_SET_CACHING, i915_gem_set_caching_ioctl, DRM_RENDER_ALLOW),
+	DRM_IOCTL_DEF_DRV(I915_GEM_GET_CACHING, i915_gem_get_caching_ioctl, DRM_RENDER_ALLOW),
+	DRM_IOCTL_DEF_DRV(I915_GEM_THROTTLE, i915_gem_throttle_ioctl, DRM_AUTH|DRM_RENDER_ALLOW),
+	DRM_IOCTL_DEF_DRV(I915_GEM_ENTERVT, drm_noop, DRM_AUTH|DRM_MASTER|DRM_ROOT_ONLY),
+	DRM_IOCTL_DEF_DRV(I915_GEM_LEAVEVT, drm_noop, DRM_AUTH|DRM_MASTER|DRM_ROOT_ONLY),
+	DRM_IOCTL_DEF_DRV(I915_GEM_CREATE, i915_gem_create_ioctl, DRM_RENDER_ALLOW),
+	DRM_IOCTL_DEF_DRV(I915_GEM_PREAD, i915_gem_pread_ioctl, DRM_RENDER_ALLOW),
+	DRM_IOCTL_DEF_DRV(I915_GEM_PWRITE, i915_gem_pwrite_ioctl, DRM_RENDER_ALLOW),
+	DRM_IOCTL_DEF_DRV(I915_GEM_MMAP, i915_gem_mmap_ioctl, DRM_RENDER_ALLOW),
+	DRM_IOCTL_DEF_DRV(I915_GEM_MMAP_GTT, i915_gem_mmap_gtt_ioctl, DRM_RENDER_ALLOW),
+	DRM_IOCTL_DEF_DRV(I915_GEM_SET_DOMAIN, i915_gem_set_domain_ioctl, DRM_RENDER_ALLOW),
+	DRM_IOCTL_DEF_DRV(I915_GEM_SW_FINISH, i915_gem_sw_finish_ioctl, DRM_RENDER_ALLOW),
+	DRM_IOCTL_DEF_DRV(I915_GEM_SET_TILING, i915_gem_set_tiling, DRM_RENDER_ALLOW),
+	DRM_IOCTL_DEF_DRV(I915_GEM_GET_TILING, i915_gem_get_tiling, DRM_RENDER_ALLOW),
+	DRM_IOCTL_DEF_DRV(I915_GEM_GET_APERTURE, i915_gem_get_aperture_ioctl, DRM_RENDER_ALLOW),
+	DRM_IOCTL_DEF_DRV(I915_GET_PIPE_FROM_CRTC_ID, intel_get_pipe_from_crtc_id, 0),
+	DRM_IOCTL_DEF_DRV(I915_GEM_MADVISE, i915_gem_madvise_ioctl, DRM_RENDER_ALLOW),
+	DRM_IOCTL_DEF_DRV(I915_OVERLAY_PUT_IMAGE, intel_overlay_put_image_ioctl, DRM_MASTER|DRM_CONTROL_ALLOW),
+	DRM_IOCTL_DEF_DRV(I915_OVERLAY_ATTRS, intel_overlay_attrs_ioctl, DRM_MASTER|DRM_CONTROL_ALLOW),
+	DRM_IOCTL_DEF_DRV(I915_SET_SPRITE_COLORKEY, intel_sprite_set_colorkey, DRM_MASTER|DRM_CONTROL_ALLOW),
+	DRM_IOCTL_DEF_DRV(I915_GET_SPRITE_COLORKEY, drm_noop, DRM_MASTER|DRM_CONTROL_ALLOW),
+	DRM_IOCTL_DEF_DRV(I915_GEM_WAIT, i915_gem_wait_ioctl, DRM_AUTH|DRM_RENDER_ALLOW),
+	DRM_IOCTL_DEF_DRV(I915_GEM_CONTEXT_CREATE, i915_gem_context_create_ioctl, DRM_RENDER_ALLOW),
+	DRM_IOCTL_DEF_DRV(I915_GEM_CONTEXT_DESTROY, i915_gem_context_destroy_ioctl, DRM_RENDER_ALLOW),
+	DRM_IOCTL_DEF_DRV(I915_REG_READ, i915_reg_read_ioctl, DRM_RENDER_ALLOW),
+	DRM_IOCTL_DEF_DRV(I915_GET_RESET_STATS, i915_gem_context_reset_stats_ioctl, DRM_RENDER_ALLOW),
+	DRM_IOCTL_DEF_DRV(I915_GEM_USERPTR, i915_gem_userptr_ioctl, DRM_RENDER_ALLOW),
+	DRM_IOCTL_DEF_DRV(I915_GEM_CONTEXT_GETPARAM, i915_gem_context_getparam_ioctl, DRM_RENDER_ALLOW),
+	DRM_IOCTL_DEF_DRV(I915_GEM_CONTEXT_SETPARAM, i915_gem_context_setparam_ioctl, DRM_RENDER_ALLOW),
+};
+
 static struct drm_driver driver = {
 	/* Don't use MTRRs here; the Xserver or userspace app should
 	 * deal with them for Intel hardware.
@@ -1772,6 +3419,7 @@ static struct drm_driver driver = {
 	.dumb_map_offset = i915_gem_mmap_gtt,
 	.dumb_destroy = drm_gem_dumb_destroy,
 	.ioctls = i915_ioctls,
+	.num_ioctls = ARRAY_SIZE(i915_ioctls),
 	.fops = &i915_driver_fops,
 	.name = DRIVER_NAME,
 	.desc = DRIVER_DESC,
@@ -1791,8 +3439,6 @@ static struct pci_driver i915_pci_driver = {
 
 static int __init i915_init(void)
 {
-	driver.num_ioctls = i915_max_ioctl;
-
 	/*
 	 * Enable KMS by default, unless explicitly overriden by
 	 * either the i915.modeset prarameter or by the
diff --git a/drivers/gpu/drm/i915/i915_drv.h b/drivers/gpu/drm/i915/i915_drv.h
index 619300618bbb..2e3beca1fee4 100644
--- a/drivers/gpu/drm/i915/i915_drv.h
+++ b/drivers/gpu/drm/i915/i915_drv.h
@@ -2857,16 +2857,13 @@ struct drm_i915_cmd_table {
 
 #include "i915_trace.h"
 
-extern const struct drm_ioctl_desc i915_ioctls[];
-extern int i915_max_ioctl;
-
 extern int i915_suspend_switcheroo(struct drm_device *dev, pm_message_t state);
 extern int i915_resume_switcheroo(struct drm_device *dev);
 
 int intel_sanitize_enable_ppgtt(struct drm_i915_private *dev_priv,
 			       	int enable_ppgtt);
 
-/* i915_dma.c */
+/* i915_drv.c */
 void __printf(3, 4)
 __i915_printk(struct drm_i915_private *dev_priv, const char *level,
 	      const char *fmt, ...);
@@ -2874,16 +2871,6 @@ __i915_printk(struct drm_i915_private *dev_priv, const char *level,
 #define i915_report_error(dev_priv, fmt, ...)				   \
 	__i915_printk(dev_priv, KERN_ERR, fmt, ##__VA_ARGS__)
 
-extern int i915_driver_load(struct pci_dev *pdev,
-			    const struct pci_device_id *ent,
-			    struct drm_driver *driver);
-extern int i915_driver_unload(struct drm_device *);
-extern int i915_driver_open(struct drm_device *dev, struct drm_file *file);
-extern void i915_driver_lastclose(struct drm_device * dev);
-extern void i915_driver_preclose(struct drm_device *dev,
-				 struct drm_file *file);
-extern void i915_driver_postclose(struct drm_device *dev,
-				  struct drm_file *file);
 #ifdef CONFIG_COMPAT
 extern long i915_compat_ioctl(struct file *filp, unsigned int cmd,
 			      unsigned long arg);
@@ -3689,7 +3676,6 @@ extern void intel_init_pch_refclk(struct drm_device *dev);
 extern void intel_set_rps(struct drm_i915_private *dev_priv, u8 val);
 extern void intel_set_memory_cxsr(struct drm_i915_private *dev_priv,
 				  bool enable);
-extern void intel_detect_pch(struct drm_device *dev);
 
 extern bool i915_semaphore_is_enabled(struct drm_i915_private *dev_priv);
 int i915_reg_read_ioctl(struct drm_device *dev, void *data,
-- 
2.8.1



More information about the Intel-gfx-trybot mailing list