[PATCH 3/4] drm/i915/lspcon: Wait for expected LSPCON mode to settle

[Imre Deak]

Some LSPCON adaptors may return an incorrect LSPCON mode right after
waking from DP Sleep state. This is the case at least for the ParadTech
PS175 adaptor, both when waking because of exiting the DP Sleep to
active state, or due to any other AUX CH transfer. We can determine the
current expected mode based on whether the DPCD area is accessible,
since according to the LSPCON spec this area is only accesible
in PCON mode.

This wait will avoid us trying to change the mode, while the current
expected mode hasn't settled yet and start link training before the
adaptor thinks it's in PCON mode after waking from DP Sleep state.

Cc: Shashank Sharma <shashank.sharma at intel.com>
Cc: Ville Syrjälä <ville.syrjala at linux.intel.com>
Cc: Jani Nikula <jani.nikula at intel.com>
Signed-off-by: Imre Deak <imre.deak at intel.com>
---
 drivers/gpu/drm/i915/intel_dp.c     |  5 +++
 drivers/gpu/drm/i915/intel_drv.h    |  1 +
 drivers/gpu/drm/i915/intel_lspcon.c | 70 ++++++++++++++++++++++++++++++++-----
 3 files changed, 68 insertions(+), 8 deletions(-)

diff --git a/drivers/gpu/drm/i915/intel_dp.c b/drivers/gpu/drm/i915/intel_dp.c
index 16c19d78..8026a83 100644
--- a/drivers/gpu/drm/i915/intel_dp.c
+++ b/drivers/gpu/drm/i915/intel_dp.c
@@ -2401,6 +2401,8 @@ void intel_dp_sink_dpms(struct intel_dp *intel_dp, int mode)
 		ret = drm_dp_dpcd_writeb(&intel_dp->aux, DP_SET_POWER,
 					 DP_SET_POWER_D3);
 	} else {
+		struct intel_lspcon *lspcon = dp_to_lspcon(intel_dp);
+
 		/*
 		 * When turning on, we need to retry for 1ms to give the sink
 		 * time to wake up.
@@ -2412,6 +2414,9 @@ void intel_dp_sink_dpms(struct intel_dp *intel_dp, int mode)
 				break;
 			msleep(1);
 		}
+
+		if (ret == 1 && lspcon->active)
+			lspcon_wait_pcon_mode(lspcon);
 	}
 
 	if (ret != 1)
diff --git a/drivers/gpu/drm/i915/intel_drv.h b/drivers/gpu/drm/i915/intel_drv.h
index cf47e8a..d165904 100644
--- a/drivers/gpu/drm/i915/intel_drv.h
+++ b/drivers/gpu/drm/i915/intel_drv.h
@@ -1830,4 +1830,5 @@ void intel_color_load_luts(struct drm_crtc_state *crtc_state);
 /* intel_lspcon.c */
 bool lspcon_init(struct intel_digital_port *intel_dig_port);
 void lspcon_resume(struct intel_lspcon *lspcon);
+void lspcon_wait_pcon_mode(struct intel_lspcon *lspcon);
 #endif /* __INTEL_DRV_H__ */
diff --git a/drivers/gpu/drm/i915/intel_lspcon.c b/drivers/gpu/drm/i915/intel_lspcon.c
index 5013124..281127d 100644
--- a/drivers/gpu/drm/i915/intel_lspcon.c
+++ b/drivers/gpu/drm/i915/intel_lspcon.c
@@ -35,16 +35,54 @@ static struct intel_dp *lspcon_to_intel_dp(struct intel_lspcon *lspcon)
 	return &dig_port->dp;
 }
 
+static const char *lspcon_mode_name(enum drm_lspcon_mode mode)
+{
+	switch (mode) {
+	case DRM_LSPCON_MODE_PCON:
+		return "PCON";
+	case DRM_LSPCON_MODE_LS:
+		return "LS";
+	case DRM_LSPCON_MODE_INVALID:
+		return "INVALID";
+	default:
+		MISSING_CASE(mode);
+		return "INVALID";
+	}
+}
+
 static enum drm_lspcon_mode lspcon_get_current_mode(struct intel_lspcon *lspcon)
 {
-	enum drm_lspcon_mode current_mode = DRM_LSPCON_MODE_INVALID;
+	enum drm_lspcon_mode current_mode;
 	struct i2c_adapter *adapter = &lspcon_to_intel_dp(lspcon)->aux.ddc;
 
-	if (drm_lspcon_get_mode(adapter, &current_mode))
+	if (drm_lspcon_get_mode(adapter, &current_mode)) {
 		DRM_ERROR("Error reading LSPCON mode\n");
-	else
-		DRM_DEBUG_KMS("Current LSPCON mode %s\n",
-			current_mode == DRM_LSPCON_MODE_PCON ? "PCON" : "LS");
+		return DRM_LSPCON_MODE_INVALID;
+	}
+	return current_mode;
+}
+
+static enum drm_lspcon_mode lspcon_wait_mode(struct intel_lspcon *lspcon,
+					     enum drm_lspcon_mode mode)
+{
+	enum drm_lspcon_mode current_mode;
+
+	current_mode = lspcon_get_current_mode(lspcon);
+	if (current_mode == mode || current_mode == DRM_LSPCON_MODE_INVALID)
+		goto out;
+
+	DRM_DEBUG_KMS("Waiting for LSPCON mode %s to settle\n",
+		      lspcon_mode_name(mode));
+
+	wait_for((current_mode = lspcon_get_current_mode(lspcon)) == mode ||
+		 current_mode == DRM_LSPCON_MODE_INVALID, 100);
+	if (current_mode != mode)
+		DRM_DEBUG_KMS("LSPCON mode hasn't settled\n");
+
+out:
+	DRM_DEBUG_KMS("Current LSPCON mode %s\n",
+		      lspcon_mode_name(current_mode));
+
 	return current_mode;
 }
 
@@ -97,8 +135,10 @@ static bool lspcon_probe(struct intel_lspcon *lspcon)
 {
 	enum drm_dp_dual_mode_type adaptor_type;
 	struct i2c_adapter *adapter = &lspcon_to_intel_dp(lspcon)->aux.ddc;
+	enum drm_lspcon_mode expected_mode;
 
-	lspcon_wake_native_aux_ch(lspcon);
+	expected_mode = lspcon_wake_native_aux_ch(lspcon) ?
+			DRM_LSPCON_MODE_PCON : DRM_LSPCON_MODE_LS;
 
 	/* Lets probe the adaptor and check its type */
 	adaptor_type = drm_dp_dual_mode_detect(adapter);
@@ -110,7 +150,7 @@ static bool lspcon_probe(struct intel_lspcon *lspcon)
 
 	/* Yay ... got a LSPCON device */
 	DRM_DEBUG_KMS("LSPCON detected\n");
-	lspcon->mode = lspcon_get_current_mode(lspcon);
+	lspcon->mode = lspcon_wait_mode(lspcon, expected_mode);
 	lspcon->active = true;
 	return true;
 }
@@ -150,8 +190,17 @@ static void lspcon_resume_in_pcon_wa(struct intel_lspcon *lspcon)
 
 void lspcon_resume(struct intel_lspcon *lspcon)
 {
-	if (lspcon_wake_native_aux_ch(lspcon))
+	enum drm_lspcon_mode expected_mode;
+
+	if (lspcon_wake_native_aux_ch(lspcon)) {
+		expected_mode = DRM_LSPCON_MODE_PCON;
 		lspcon_resume_in_pcon_wa(lspcon);
+	} else {
+		expected_mode = DRM_LSPCON_MODE_LS;
+	}
+
+	if (lspcon_wait_mode(lspcon, expected_mode) == DRM_LSPCON_MODE_PCON)
+		return;
 
 	if (lspcon_change_mode(lspcon, DRM_LSPCON_MODE_PCON, true))
 		DRM_ERROR("LSPCON resume failed\n");
@@ -159,6 +208,11 @@ void lspcon_resume(struct intel_lspcon *lspcon)
 		DRM_DEBUG_KMS("LSPCON resume success\n");
 }
 
+void lspcon_wait_pcon_mode(struct intel_lspcon *lspcon)
+{
+	lspcon_wait_mode(lspcon, DRM_LSPCON_MODE_PCON);
+}
+
 bool lspcon_init(struct intel_digital_port *intel_dig_port)
 {
 	struct intel_dp *dp = &intel_dig_port->dp;
-- 
2.5.0