[PATCH 1/8] drm/i915/vlv: Fix port B PLL opamp initialization

[Imre Deak]

The current code looks like a typo, the specification calls for setting
bits 31:24 to 0x8C, while preserving bits 23:0. Fix things accordingly.

I'm not aware of the typo causing a real problem, so the fix is only for
consistency.

Cc: Ville Syrjälä <ville.syrjala at linux.intel.com>
Signed-off-by: Imre Deak <imre.deak at intel.com>
---
 drivers/gpu/drm/i915/intel_display.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c
index 85b9e2f5..19a7a1e 100644
--- a/drivers/gpu/drm/i915/intel_display.c
+++ b/drivers/gpu/drm/i915/intel_display.c
@@ -6369,8 +6369,8 @@ static void vlv_pllb_recal_opamp(struct drm_i915_private *dev_priv, enum pipe
 	vlv_dpio_write(dev_priv, pipe, VLV_PLL_DW9(1), reg_val);
 
 	reg_val = vlv_dpio_read(dev_priv, pipe, VLV_REF_DW13);
-	reg_val &= 0x8cffffff;
-	reg_val = 0x8c000000;
+	reg_val &= 0x00ffffff;
+	reg_val |= 0x8c000000;
 	vlv_dpio_write(dev_priv, pipe, VLV_REF_DW13, reg_val);
 
 	reg_val = vlv_dpio_read(dev_priv, pipe, VLV_PLL_DW9(1));
-- 
2.5.0