[PATCH 4/4] drm/i915: Preserve the state of power wells not explicitly enabled

Imre Deak imre.deak at intel.com
Tue Feb 14 17:31:53 UTC 2017


Atm, power wells that BIOS has enabled, but which we don't explicitly
enable during power domain initialization would get disabled as we clear
the BIOS request bit in the given power well sync_hw hook. To prevent
this copy over any set request bits in the BIOS request register to the
driver request register and clear the BIOS request bit only afterwards.

This doesn't make a difference now, since we enable all power wells
during power domain initialization. A follow-up patchset will add power
wells for which this isn't true, so fix up the inconsistency.

Cc: Ander Conselvan de Oliveira <conselvan2 at gmail.com>
Cc: David Weinehall <david.weinehall at linux.intel.com>
Cc: Ville Syrjälä <ville.syrjala at linux.intel.com>
Signed-off-by: Imre Deak <imre.deak at intel.com>
---
 drivers/gpu/drm/i915/intel_runtime_pm.c | 14 ++++++++------
 1 file changed, 8 insertions(+), 6 deletions(-)

diff --git a/drivers/gpu/drm/i915/intel_runtime_pm.c b/drivers/gpu/drm/i915/intel_runtime_pm.c
index c5b7fba..a395c19 100644
--- a/drivers/gpu/drm/i915/intel_runtime_pm.c
+++ b/drivers/gpu/drm/i915/intel_runtime_pm.c
@@ -855,12 +855,12 @@ static void skl_set_power_well(struct drm_i915_private *dev_priv,
 static void hsw_power_well_sync_hw(struct drm_i915_private *dev_priv,
 				   struct i915_power_well *power_well)
 {
-	/*
-	 * We're taking over the BIOS, so clear any requests made by it since
-	 * the driver is in charge now.
-	 */
-	if (I915_READ(HSW_PWR_WELL_BIOS) & HSW_PWR_WELL_ENABLE_REQUEST)
+	/* Take over the request bit if set by BIOS. */
+	if (I915_READ(HSW_PWR_WELL_BIOS) & HSW_PWR_WELL_ENABLE_REQUEST) {
+		I915_WRITE(HSW_PWR_WELL_DRIVER,
+			   HSW_PWR_WELL_ENABLE_REQUEST);
 		I915_WRITE(HSW_PWR_WELL_BIOS, 0);
+	}
 }
 
 static void hsw_power_well_enable(struct drm_i915_private *dev_priv,
@@ -890,8 +890,10 @@ static void skl_power_well_sync_hw(struct drm_i915_private *dev_priv,
 	uint32_t mask = SKL_POWER_WELL_REQ(power_well->id);
 	uint32_t val = I915_READ(HSW_PWR_WELL_BIOS);
 
-	/* Clear any request made by BIOS as driver is taking over */
+	/* Take over the request bit if set by BIOS. */
 	if (val & mask) {
+		I915_WRITE(HSW_PWR_WELL_DRIVER,
+			   I915_READ(HSW_PWR_WELL_DRIVER) | mask);
 		I915_WRITE(HSW_PWR_WELL_BIOS, val & ~mask);
 	}
 }
-- 
2.5.0



More information about the Intel-gfx-trybot mailing list