[PATCH v3 3/5] drm/dp: add helpers for capture of frame CRCs
Tomeu Vizoso
tomeu.vizoso at collabora.com
Mon Jan 9 13:24:07 UTC 2017
On 6 January 2017 at 16:56, Sean Paul <seanpaul at chromium.org> wrote:
> On Fri, Jan 6, 2017 at 9:30 AM, Tomeu Vizoso <tomeu.vizoso at collabora.com> wrote:
>> Adds helpers for starting and stopping capture of frame CRCs through the
>> DPCD. When capture is on, a worker waits for vblanks and retrieves the
>> frame CRC to put it in the queue on the CRTC that is using the
>> eDP connector, so it's passed to userspace.
>>
>> v2: Reuse drm_crtc_wait_one_vblank
>> Update locking, as drm_crtc_add_crc_entry now takes the lock
>>
>> v3: Don't call wake_up_interruptible directly, that's now done in
>> drm_crtc_add_crc_entry.
>>
>> Signed-off-by: Tomeu Vizoso <tomeu.vizoso at collabora.com>
>> ---
>>
>> drivers/gpu/drm/drm_dp_helper.c | 118 ++++++++++++++++++++++++++++++++++++++++
>> include/drm/drm_dp_helper.h | 7 +++
>> 2 files changed, 125 insertions(+)
>>
>> diff --git a/drivers/gpu/drm/drm_dp_helper.c b/drivers/gpu/drm/drm_dp_helper.c
>> index 3e6fe82c6d64..e531f1317268 100644
>> --- a/drivers/gpu/drm/drm_dp_helper.c
>> +++ b/drivers/gpu/drm/drm_dp_helper.c
>> @@ -981,6 +981,74 @@ static const struct i2c_lock_operations drm_dp_i2c_lock_ops = {
>> .unlock_bus = unlock_bus,
>> };
>>
>> +static int drm_dp_aux_get_crc(struct drm_dp_aux *aux, u8 *crc)
>> +{
>> + u8 buf, count;
>> + int ret;
>> +
>> + ret = drm_dp_dpcd_readb(aux, DP_TEST_SINK, &buf);
>> + if (ret < 0)
>> + return ret;
>> +
>> + WARN_ON(!(buf & DP_TEST_SINK_START));
>> +
>> + ret = drm_dp_dpcd_readb(aux, DP_TEST_SINK_MISC, &buf);
>> + if (ret < 0)
>> + return ret;
>> +
>> + count = buf & DP_TEST_COUNT_MASK;
>> + if (count == aux->crc_count)
>> + return -EAGAIN; /* No CRC yet */
>> +
>> + aux->crc_count = count;
>> +
>> + /* At DP_TEST_CRC_R_CR, there's 6 bytes containing CRC data, 2 bytes
>> + * per component (RGB or CrYCb).
>
> nit: doesn't conform to CodingStyle
>
>> + */
>> + ret = drm_dp_dpcd_read(aux, DP_TEST_CRC_R_CR, crc, 6);
>> + if (ret < 0)
>> + return ret;
>> +
>> + return 0;
>> +}
>> +
>> +static void drm_dp_aux_crc_work(struct work_struct *work)
>> +{
>> + struct drm_dp_aux *aux = container_of(work, struct drm_dp_aux,
>> + crc_work);
>> + struct drm_crtc *crtc;
>> + u8 crc_bytes[6];
>> + uint32_t crcs[3];
>> + int ret;
>> +
>> + if (WARN_ON(!aux->connector))
>> + return;
>> +
>> + crtc = aux->connector->state->crtc;
>> + while (crtc->crc.opened) {
>> + drm_crtc_wait_one_vblank(crtc);
>> + if (!crtc->crc.opened)
>> + break;
>> +
>> + ret = drm_dp_aux_get_crc(aux, crc_bytes);
>> + if (ret == -EAGAIN) {
>> + usleep_range(1000, 2000);
>> + ret = drm_dp_aux_get_crc(aux, crc_bytes);
>> + }
>> +
>> + if (ret) {
>> + DRM_DEBUG_KMS("Failed to get a CRC even after retrying: %d\n",
>> + ret);
>> + continue;
>> + }
>
> I think it'd be better to restructure this to only call
> drm_dp_aux_get_crc in one place
I'm not completely sure, TBH, as I liked that it was very clear that
we only retry once. I'm about to send v4 with this change and you can
judge by yourself.
> (and differentiate between EAGAIN and
> other failures):
Good point.
> bool retry = false;
> while (...) {
> ...
>
> ret = drm_dp_aux_get_crc(aux, crc_bytes);
> if (ret == -EAGAIN) {
> if (retry)
> DRM_DEBUG_KMS("Get CRC failed after retrying: %d\n",
> ret);
> retry = !retry;
> usleep_range(1000, 2000);
> continue;
> }
>
> retry = false;
> if (!ret) {
> crcs[0] = crc_bytes[0] | crc_bytes[1] << 8;
> crcs[1] = crc_bytes[2] | crc_bytes[3] << 8;
> crcs[2] = crc_bytes[4] | crc_bytes[5] << 8;
> ret = drm_crtc_add_crc_entry(crtc, false, 0, crcs);
> if (ret)
> DRM_DEBUG_KMS("Failed to add crc entry %d\n", ret);
> } else {
> DRM_DEBUG_KMS("Get CRC failed: %d\n", ret);
> }
> }
>
>> +
>> + crcs[0] = crc_bytes[0] | crc_bytes[1] << 8;
>> + crcs[1] = crc_bytes[2] | crc_bytes[3] << 8;
>> + crcs[2] = crc_bytes[4] | crc_bytes[5] << 8;
>> + ret = drm_crtc_add_crc_entry(crtc, false, 0, crcs);
>> + }
>> +}
>> +
>> /**
>> * drm_dp_aux_init() - minimally initialise an aux channel
>> * @aux: DisplayPort AUX channel
>> @@ -993,6 +1061,7 @@ static const struct i2c_lock_operations drm_dp_i2c_lock_ops = {
>> void drm_dp_aux_init(struct drm_dp_aux *aux)
>> {
>> mutex_init(&aux->hw_mutex);
>> + INIT_WORK(&aux->crc_work, drm_dp_aux_crc_work);
>>
>> aux->ddc.algo = &drm_dp_i2c_algo;
>> aux->ddc.algo_data = aux;
>> @@ -1081,3 +1150,52 @@ int drm_dp_psr_setup_time(const u8 psr_cap[EDP_PSR_RECEIVER_CAP_SIZE])
>> EXPORT_SYMBOL(drm_dp_psr_setup_time);
>>
>> #undef PSR_SETUP_TIME
>> +
>> +/**
>> + * drm_dp_start_crc() - start capture of frame CRCs
>> + * @aux: DisplayPort AUX channel
>> + *
>> + * Returns 0 on success or a negative error code on failure.
>> + */
>> +int drm_dp_start_crc(struct drm_dp_aux *aux)
>> +{
>> + u8 buf;
>> + int ret;
>> +
>> + ret = drm_dp_dpcd_readb(aux, DP_TEST_SINK, &buf);
>> + if (ret < 0)
>> + return ret;
>> +
>> + ret = drm_dp_dpcd_writeb(aux, DP_TEST_SINK, buf | DP_TEST_SINK_START);
>> + if (ret < 0)
>> + return ret;
>> +
>> + aux->crc_count = 0;
>> + schedule_work(&aux->crc_work);
>> +
>> + return 0;
>> +}
>> +EXPORT_SYMBOL(drm_dp_start_crc);
>> +
>> +/**
>> + * drm_dp_stop_crc() - stop capture of frame CRCs
>> + * @aux: DisplayPort AUX channel
>> + *
>> + * Returns 0 on success or a negative error code on failure.
>> + */
>> +int drm_dp_stop_crc(struct drm_dp_aux *aux)
>> +{
>> + u8 buf;
>> + int ret;
>> +
>> + ret = drm_dp_dpcd_readb(aux, DP_TEST_SINK, &buf);
>> + if (ret < 0)
>> + return ret;
>> +
>> + ret = drm_dp_dpcd_writeb(aux, DP_TEST_SINK, buf & ~DP_TEST_SINK_START);
>> + if (ret < 0)
>> + return ret;
>> +
>
> Can we flush the worker here to head off any races?
Good point.
Thanks,
Tomeu
More information about the Intel-gfx-trybot
mailing list