[PATCH 3/8] drm/i915: Expose the busyspin durations for i915_wait_request

Chris Wilson chris at chris-wilson.co.uk
Mon Nov 27 22:44:18 UTC 2017


An interesting discussion regarding "hybrid interrupt polling" for NVMe
came to the conclusion that the ideal busyspin before sleeping was half
of the expected request latency (and better if it was already halfway
through that request). This suggested that we too should look again at
our tradeoff between spinning and waiting. Currently, our spin simply
tries to hide the cost of enabling the interrupt, which is good to avoid
penalising nop requests (i.e. test throughput) and not much else.
Studying real world workloads suggests that a spin of upto 500us can
dramatically boost performance, but the suggestion is that this is not
from avoiding interrupt latency per-se, but from secondary effects of
sleeping such as allowing the CPU reduce cstate and context switch away.

In a truly hybrid interrupt polling scheme, we would aim to sleep until
just before the request completed and then wake up in advance of the
interrupt and do a quick poll to handle completion. This is tricky for
ourselves at the moment as we are not recording request times, and since
we allow preemption, our requests are not on as a nicely ordered
timeline as IO. However, the idea is interesting, for it will certainly
help us decide when busyspinning is worthwhile.

v2: Expose the spin setting via Kconfig options for easier adjustment
and testing.
v3: Don't get caught sneaking in a change to the busyspin parameters.
v4: Explain more about the "hybrid interrupt polling" scheme that we
want to migrate towards.

Suggested-by: Sagar Kamble <sagar.a.kamble at intel.com>
References: http://events.linuxfoundation.org/sites/events/files/slides/lemoal-nvme-polling-vault-2017-final_0.pdf
Signed-off-by: Chris Wilson <chris at chris-wilson.co.uk>
Cc: Sagar Kamble <sagar.a.kamble at intel.com>
Cc: Eero Tamminen <eero.t.tamminen at intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin at intel.com>
Cc: Ben Widawsky <ben at bwidawsk.net>
Cc: Joonas Lahtinen <joonas.lahtinen at linux.intel.com>
Cc: MichaƂ Winiarski <michal.winiarski at intel.com>
Reviewed-by: Sagar Kamble <sagar.a.kamble at intel.com>
---
 drivers/gpu/drm/i915/Kconfig            |  6 +++++
 drivers/gpu/drm/i915/Kconfig.profile    | 26 ++++++++++++++++++++++
 drivers/gpu/drm/i915/i915_gem_request.c | 39 +++++++++++++++++++++++++++++----
 3 files changed, 67 insertions(+), 4 deletions(-)
 create mode 100644 drivers/gpu/drm/i915/Kconfig.profile

diff --git a/drivers/gpu/drm/i915/Kconfig b/drivers/gpu/drm/i915/Kconfig
index dfd95889f4b7..eae90783f8f9 100644
--- a/drivers/gpu/drm/i915/Kconfig
+++ b/drivers/gpu/drm/i915/Kconfig
@@ -131,3 +131,9 @@ depends on DRM_I915
 depends on EXPERT
 source drivers/gpu/drm/i915/Kconfig.debug
 endmenu
+
+menu "drm/i915 Profile Guided Optimisation"
+	visible if EXPERT
+	depends on DRM_I915
+	source drivers/gpu/drm/i915/Kconfig.profile
+endmenu
diff --git a/drivers/gpu/drm/i915/Kconfig.profile b/drivers/gpu/drm/i915/Kconfig.profile
new file mode 100644
index 000000000000..8a230eeb98df
--- /dev/null
+++ b/drivers/gpu/drm/i915/Kconfig.profile
@@ -0,0 +1,26 @@
+config DRM_I915_SPIN_REQUEST_IRQ
+	int
+	default 5 # microseconds
+	help
+	  Before sleeping waiting for a request (GPU operation) to complete,
+	  we may spend some time polling for its completion. As the IRQ may
+	  take a non-negligible time to setup, we do a short spin first to
+	  check if the request will complete in the time it would have taken
+	  us to enable the interrupt.
+
+	  May be 0 to disable the initial spin. In practice, we estimate
+	  the cost of enabling the interrupt (if currently disabled) to be
+	  a few microseconds.
+
+config DRM_I915_SPIN_REQUEST_CS
+	int
+	default 2 # microseconds
+	help
+	  After sleeping for a request (GPU operation) to complete, we will
+	  be woken up on the completion of every request prior to the one
+	  being waited on. For very short requests, going back to sleep and
+	  be woken up again may add considerably to the wakeup latency. To
+	  avoid incurring extra latency from the scheduler, we may choose to
+	  spin prior to sleeping again.
+
+	  May be 0 to disable spinning after being woken.
diff --git a/drivers/gpu/drm/i915/i915_gem_request.c b/drivers/gpu/drm/i915/i915_gem_request.c
index a90bdd26571f..be84ea6a56d7 100644
--- a/drivers/gpu/drm/i915/i915_gem_request.c
+++ b/drivers/gpu/drm/i915/i915_gem_request.c
@@ -1198,8 +1198,32 @@ long i915_wait_request(struct drm_i915_gem_request *req,
 	GEM_BUG_ON(!intel_wait_has_seqno(&wait));
 	GEM_BUG_ON(!i915_sw_fence_signaled(&req->submit));
 
-	/* Optimistic short spin before touching IRQs */
-	if (__i915_spin_request(req, wait.seqno, state, 5))
+	/*
+	 * Optimistic spin before touching IRQs.
+	 *
+	 * We may use a rather large value here to offset the penalty of
+	 * switching away from the active task. Frequently, the client will
+	 * wait upon an old swapbuffer to throttle itself to remain within a
+	 * frame of the gpu. If the client is running in lockstep with the gpu,
+	 * then it should not be waiting long at all, and a sleep now will incur
+	 * extra scheduler latency in producing the next frame. To try to
+	 * avoid adding the cost of enabling/disabling the interrupt to the
+	 * short wait, we first spin to see if the request would have completed
+	 * in the time taken to setup the interrupt.
+	 *
+	 * We need upto 5us to enable the irq, and upto 20us to hide the
+	 * scheduler latency of a context switch, ignoring the secondary
+	 * impacts from a context switch such as cache eviction.
+	 *
+	 * The scheme used for low-latency IO is called "hybrid interrupt
+	 * polling". The suggestion there is to sleep until just before you
+	 * expect to be woken by the device interrupt and then poll for its
+	 * completion. That requires having a good predictor for the request
+	 * duration, which we currently lack.
+	 */
+	if (CONFIG_DRM_I915_SPIN_REQUEST_IRQ &&
+	    __i915_spin_request(req, wait.seqno, state,
+				CONFIG_DRM_I915_SPIN_REQUEST_IRQ))
 		goto complete;
 
 	set_current_state(state);
@@ -1255,8 +1279,15 @@ long i915_wait_request(struct drm_i915_gem_request *req,
 		    __i915_wait_request_check_and_reset(req))
 			continue;
 
-		/* Only spin if we know the GPU is processing this request */
-		if (__i915_spin_request(req, wait.seqno, state, 2))
+		/*
+		 * A quick spin now we are on the CPU to offset the cost of
+		 * context switching away (and so spin for roughly the same as
+		 * the scheduler latency). We only spin if we know the GPU is
+		 * processing this request, and so likely to finish shortly.
+		 */
+		if (CONFIG_DRM_I915_SPIN_REQUEST_CS &&
+		    __i915_spin_request(req, wait.seqno, state,
+					CONFIG_DRM_I915_SPIN_REQUEST_CS))
 			break;
 
 		if (!intel_wait_check_request(&wait, req)) {
-- 
2.15.0



More information about the Intel-gfx-trybot mailing list