[PATCH 37/54] drm/i915: Enable render context support for Ironlake (gen5)

Chris Wilson chris at chris-wilson.co.uk
Fri Apr 13 13:28:10 UTC 2018


Ironlake does support being able to saving and reloading context specific
registers between contexts, providing isolation of the basic GPU state
(as programmable by userspace). This allows userspace to assume that the
GPU retains their state from one batch to the next, minimising the
amount of state it needs to reload, or manually save and restore.

v2: Fix off-by-one in reading CXT_SIZE, and add a comment that the
CXT_SIZE and context-layout do not match in bspec, but the difference is
irrelevant as we overallocate the full page anyway (Ville).

Signed-off-by: Chris Wilson <chris at chris-wilson.co.uk>
Cc: Ville Syrjälä <ville.syrjala at linux.intel.com>
Cc: Kenneth Graunke <kenneth at whitecape.org>
Reviewed-by: Ville Syrjälä <ville.syrjala at linux.intel.com>
---
 drivers/gpu/drm/i915/intel_engine_cs.c  | 16 ++++++++++++++++
 drivers/gpu/drm/i915/intel_ringbuffer.c | 13 +++++++++++++
 2 files changed, 29 insertions(+)

diff --git a/drivers/gpu/drm/i915/intel_engine_cs.c b/drivers/gpu/drm/i915/intel_engine_cs.c
index 7c3887c0e0f5..a64749c25c21 100644
--- a/drivers/gpu/drm/i915/intel_engine_cs.c
+++ b/drivers/gpu/drm/i915/intel_engine_cs.c
@@ -220,6 +220,22 @@ __intel_engine_context_size(struct drm_i915_private *dev_priv, u8 class)
 			return round_up(GEN6_CXT_TOTAL_SIZE(cxt_size) * 64,
 					PAGE_SIZE);
 		case 5:
+			/*
+			 * There is a discrepancy here between the size reported
+			 * by the register and the size of the context layout
+			 * in the docs. Both are described as authorative!
+			 *
+			 * The discrepancy is on the order of a few cachelines,
+			 * but the total is under one page (4k), which is our
+			 * minimum allocation anyway so it should all come
+			 * out in the wash.
+			 */
+			cxt_size = I915_READ(CXT_SIZE) + 1;
+			DRM_DEBUG_DRIVER("gen%d CXT_SIZE = %d bytes [0x%08x]\n",
+					 INTEL_GEN(dev_priv),
+					 cxt_size * 64,
+					 cxt_size - 1);
+			return round_up(cxt_size * 64, PAGE_SIZE);
 		case 4:
 		case 3:
 		case 2:
diff --git a/drivers/gpu/drm/i915/intel_ringbuffer.c b/drivers/gpu/drm/i915/intel_ringbuffer.c
index c4997b56ec26..b0c44f86e06f 100644
--- a/drivers/gpu/drm/i915/intel_ringbuffer.c
+++ b/drivers/gpu/drm/i915/intel_ringbuffer.c
@@ -1429,11 +1429,14 @@ static inline int mi_set_context(struct i915_request *rq, u32 flags)
 		/* These flags are for resource streamer on HSW+ */
 		flags |= HSW_MI_RS_SAVE_STATE_EN | HSW_MI_RS_RESTORE_STATE_EN;
 	else
+		/* We need to save the extended state for powersaving modes */
 		flags |= MI_SAVE_EXT_STATE_EN | MI_RESTORE_EXT_STATE_EN;
 
 	len = 4;
 	if (IS_GEN7(i915))
 		len += 2 + (num_rings ? 4*num_rings + 6 : 0);
+	if (IS_GEN5(i915))
+		len += 2;
 
 	cs = intel_ring_begin(rq, len);
 	if (IS_ERR(cs))
@@ -1456,6 +1459,14 @@ static inline int mi_set_context(struct i915_request *rq, u32 flags)
 						GEN6_PSMI_SLEEP_MSG_DISABLE);
 			}
 		}
+	} else if (IS_GEN5(i915)) {
+		/*
+		 * This w/a is only listed for pre-production ilk a/b steppings,
+		 * but is also mentioned for programming the powerctx. To be
+		 * safe, just apply the workaround; we do not use SyncFlush so
+		 * this should never take effect and so be a no-op!
+		 */
+		*cs++ = MI_SUSPEND_FLUSH | MI_SUSPEND_FLUSH_EN;
 	}
 
 	*cs++ = MI_NOOP;
@@ -1490,6 +1501,8 @@ static inline int mi_set_context(struct i915_request *rq, u32 flags)
 			*cs++ = MI_NOOP;
 		}
 		*cs++ = MI_ARB_ON_OFF | MI_ARB_ENABLE;
+	} else if (IS_GEN5(i915)) {
+		*cs++ = MI_SUSPEND_FLUSH;
 	}
 
 	intel_ring_advance(rq, cs);
-- 
2.17.0



More information about the Intel-gfx-trybot mailing list