[PATCH 03/19] drm/i915: Move out non-display related calls from display/modeset init/cleanup

José Roberto de Souza jose.souza at intel.com
Wed Aug 22 19:54:02 UTC 2018


i915_load_modeset_init() and intel_modeset_cleanup() was initializing
and cleaning up things that is not display only.
This will make easy initialize driver without display block.

Also moving VLV/CHV/BYT czclk as it is a core clock used as base by
several other GPU blocks not only display, including gem/GT.
Spec: 14370

Signed-off-by: José Roberto de Souza <jose.souza at intel.com>
---
 drivers/gpu/drm/i915/i915_drv.c      | 81 +++++++++++++++++-----------
 drivers/gpu/drm/i915/i915_drv.h      |  1 +
 drivers/gpu/drm/i915/intel_display.c | 24 ++-------
 drivers/gpu/drm/i915/intel_pm.c      | 10 ++++
 4 files changed, 67 insertions(+), 49 deletions(-)

diff --git a/drivers/gpu/drm/i915/i915_drv.c b/drivers/gpu/drm/i915/i915_drv.c
index 0df2b762869d..71fcc73120a6 100644
--- a/drivers/gpu/drm/i915/i915_drv.c
+++ b/drivers/gpu/drm/i915/i915_drv.c
@@ -664,28 +664,15 @@ static int i915_load_modeset_init(struct drm_device *dev)
 	if (ret)
 		goto cleanup_vga_client;
 
-	/* must happen before intel_power_domains_init_hw() on VLV/CHV */
-	intel_update_rawclk(dev_priv);
-
-	intel_power_domains_init_hw(dev_priv, false);
-
 	intel_csr_ucode_init(dev_priv);
 
-	ret = intel_irq_install(dev_priv);
-	if (ret)
-		goto cleanup_csr;
-
 	intel_setup_gmbus(dev_priv);
 
 	/* Important: The output setup functions called by modeset_init need
 	 * working irqs for e.g. gmbus and dp aux transfers. */
 	ret = intel_modeset_init(dev);
 	if (ret)
-		goto cleanup_irq;
-
-	ret = i915_gem_init(dev_priv);
-	if (ret)
-		goto cleanup_modeset;
+		goto cleanup_gmbus;
 
 	intel_setup_overlay(dev_priv);
 
@@ -694,25 +681,18 @@ static int i915_load_modeset_init(struct drm_device *dev)
 
 	ret = intel_fbdev_init(dev);
 	if (ret)
-		goto cleanup_gem;
+		goto cleanup_modeset;
 
 	/* Only enable hotplug handling once the fbdev is fully set up. */
 	intel_hpd_init(dev_priv);
 
 	return 0;
 
-cleanup_gem:
-	if (i915_gem_suspend(dev_priv))
-		DRM_ERROR("failed to idle hardware; continuing to unload!\n");
-	i915_gem_fini(dev_priv);
 cleanup_modeset:
 	intel_modeset_cleanup(dev);
-cleanup_irq:
-	drm_irq_uninstall(dev);
+cleanup_gmbus:
 	intel_teardown_gmbus(dev_priv);
-cleanup_csr:
 	intel_csr_ucode_fini(dev_priv);
-	intel_power_domains_fini_hw(dev_priv);
 	vga_switcheroo_unregister_client(pdev);
 cleanup_vga_client:
 	vga_client_register(pdev, NULL, NULL, NULL);
@@ -1405,9 +1385,25 @@ int i915_driver_load(struct pci_dev *pdev, const struct pci_device_id *ent)
 			goto out_cleanup_hw;
 	}
 
+	/* must happen before intel_power_domains_init_hw() on VLV/CHV */
+	intel_update_rawclk(dev_priv);
+
+	/* i915_gem_init() call chain will call
+	 * intel_display_power_put(i915, POWER_DOMAIN_GT_IRQ);
+	 */
+	intel_power_domains_init_hw(dev_priv, false);
+
+	ret = intel_irq_install(dev_priv);
+	if (ret)
+		goto out_cleanup_power;
+
+	ret = i915_gem_init(dev_priv);
+	if (ret)
+		goto cleanup_irq;
+
 	ret = i915_load_modeset_init(&dev_priv->drm);
 	if (ret < 0)
-		goto out_cleanup_hw;
+		goto cleanup_gem;
 
 	i915_driver_register(dev_priv);
 
@@ -1419,6 +1415,14 @@ int i915_driver_load(struct pci_dev *pdev, const struct pci_device_id *ent)
 
 	return 0;
 
+cleanup_gem:
+	if (i915_gem_suspend(dev_priv))
+		DRM_ERROR("failed to idle hardware; continuing to unload!\n");
+	i915_gem_fini(dev_priv);
+cleanup_irq:
+	drm_irq_uninstall(&dev_priv->drm);
+out_cleanup_power:
+	intel_power_domains_fini_hw(dev_priv);
 out_cleanup_hw:
 	i915_driver_cleanup_hw(dev_priv);
 out_cleanup_mmio:
@@ -1437,11 +1441,24 @@ int i915_driver_load(struct pci_dev *pdev, const struct pci_device_id *ent)
 	return ret;
 }
 
-void i915_driver_unload(struct drm_device *dev)
+/* unload/cleanup the leftover of i915_load_modeset_init() */
+static void i915_modeset_unload(struct drm_device *dev)
 {
 	struct drm_i915_private *dev_priv = to_i915(dev);
 	struct pci_dev *pdev = dev_priv->drm.pdev;
 
+	intel_bios_cleanup(dev_priv);
+
+	vga_switcheroo_unregister_client(pdev);
+	vga_client_register(pdev, NULL, NULL, NULL);
+
+	intel_csr_ucode_fini(dev_priv);
+}
+
+void i915_driver_unload(struct drm_device *dev)
+{
+	struct drm_i915_private *dev_priv = to_i915(dev);
+
 	disable_rpm_wakeref_asserts(dev_priv);
 
 	i915_driver_unregister(dev_priv);
@@ -1453,14 +1470,18 @@ void i915_driver_unload(struct drm_device *dev)
 
 	intel_gvt_cleanup(dev_priv);
 
-	intel_modeset_cleanup(dev);
+	intel_modeset_cleanup_prepare(dev);
 
-	intel_bios_cleanup(dev_priv);
+	/*
+	 * Interrupts and polling as the first thing to avoid creating havoc.
+	 * Too much stuff here (turning of connectors, ...) would
+	 * experience fancy races otherwise.
+	 */
+	intel_irq_uninstall(dev_priv);
 
-	vga_switcheroo_unregister_client(pdev);
-	vga_client_register(pdev, NULL, NULL, NULL);
+	intel_modeset_cleanup(dev);
 
-	intel_csr_ucode_fini(dev_priv);
+	i915_modeset_unload(dev);
 
 	/* Free error state after interrupts are fully disabled. */
 	cancel_delayed_work_sync(&dev_priv->gpu_error.hangcheck_work);
diff --git a/drivers/gpu/drm/i915/i915_drv.h b/drivers/gpu/drm/i915/i915_drv.h
index e5b9d3c77139..10a0769430a8 100644
--- a/drivers/gpu/drm/i915/i915_drv.h
+++ b/drivers/gpu/drm/i915/i915_drv.h
@@ -3449,6 +3449,7 @@ mkwrite_device_info(struct drm_i915_private *dev_priv)
 /* modesetting */
 extern void intel_modeset_init_hw(struct drm_device *dev);
 extern int intel_modeset_init(struct drm_device *dev);
+void intel_modeset_cleanup_prepare(struct drm_device *dev);
 extern void intel_modeset_cleanup(struct drm_device *dev);
 extern int intel_connector_register(struct drm_connector *);
 extern void intel_connector_unregister(struct drm_connector *);
diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c
index d9e64e5fd68a..22552fa671f1 100644
--- a/drivers/gpu/drm/i915/intel_display.c
+++ b/drivers/gpu/drm/i915/intel_display.c
@@ -218,17 +218,6 @@ int vlv_get_cck_clock_hpll(struct drm_i915_private *dev_priv,
 				 dev_priv->hpll_freq);
 }
 
-static void intel_update_czclk(struct drm_i915_private *dev_priv)
-{
-	if (!(IS_VALLEYVIEW(dev_priv) || IS_CHERRYVIEW(dev_priv)))
-		return;
-
-	dev_priv->czclk_freq = vlv_get_cck_clock_hpll(dev_priv, "czclk",
-						      CCK_CZ_CLOCK_CONTROL);
-
-	DRM_DEBUG_DRIVER("CZ clock rate: %d kHz\n", dev_priv->czclk_freq);
-}
-
 static inline u32 /* units of 100MHz */
 intel_fdi_link_freq(struct drm_i915_private *dev_priv,
 		    const struct intel_crtc_state *pipe_config)
@@ -15270,7 +15259,6 @@ int intel_modeset_init(struct drm_device *dev)
 	intel_shared_dpll_init(dev);
 	intel_update_fdi_pll_freq(dev_priv);
 
-	intel_update_czclk(dev_priv);
 	intel_modeset_init_hw(dev);
 
 	if (dev_priv->max_cdclk_freq == 0)
@@ -15986,7 +15974,7 @@ static void intel_hpd_poll_fini(struct drm_device *dev)
 	drm_connector_list_iter_end(&conn_iter);
 }
 
-void intel_modeset_cleanup(struct drm_device *dev)
+void intel_modeset_cleanup_prepare(struct drm_device *dev)
 {
 	struct drm_i915_private *dev_priv = to_i915(dev);
 
@@ -15994,13 +15982,11 @@ void intel_modeset_cleanup(struct drm_device *dev)
 
 	flush_work(&dev_priv->atomic_helper.free_work);
 	WARN_ON(!llist_empty(&dev_priv->atomic_helper.free_list));
+}
 
-	/*
-	 * Interrupts and polling as the first thing to avoid creating havoc.
-	 * Too much stuff here (turning of connectors, ...) would
-	 * experience fancy races otherwise.
-	 */
-	intel_irq_uninstall(dev_priv);
+void intel_modeset_cleanup(struct drm_device *dev)
+{
+	struct drm_i915_private *dev_priv = to_i915(dev);
 
 	/*
 	 * Due to the hpd irq storm handling the hotplug work can re-arm the
diff --git a/drivers/gpu/drm/i915/intel_pm.c b/drivers/gpu/drm/i915/intel_pm.c
index d99e5fabe93c..ff517432eac8 100644
--- a/drivers/gpu/drm/i915/intel_pm.c
+++ b/drivers/gpu/drm/i915/intel_pm.c
@@ -7420,6 +7420,14 @@ static void vlv_init_gpll_ref_freq(struct drm_i915_private *dev_priv)
 			 dev_priv->gt_pm.rps.gpll_ref_freq);
 }
 
+static void valleyview_update_czclk(struct drm_i915_private *dev_priv)
+{
+	dev_priv->czclk_freq = vlv_get_cck_clock_hpll(dev_priv, "czclk",
+						      CCK_CZ_CLOCK_CONTROL);
+
+	DRM_DEBUG_DRIVER("CZ clock rate: %d kHz\n", dev_priv->czclk_freq);
+}
+
 static void valleyview_init_gt_powersave(struct drm_i915_private *dev_priv)
 {
 	struct intel_rps *rps = &dev_priv->gt_pm.rps;
@@ -7427,6 +7435,7 @@ static void valleyview_init_gt_powersave(struct drm_i915_private *dev_priv)
 
 	valleyview_setup_pctx(dev_priv);
 
+	valleyview_update_czclk(dev_priv);
 	vlv_init_gpll_ref_freq(dev_priv);
 
 	val = vlv_punit_read(dev_priv, PUNIT_REG_GPU_FREQ_STS);
@@ -7473,6 +7482,7 @@ static void cherryview_init_gt_powersave(struct drm_i915_private *dev_priv)
 
 	cherryview_setup_pctx(dev_priv);
 
+	valleyview_update_czclk(dev_priv);
 	vlv_init_gpll_ref_freq(dev_priv);
 
 	mutex_lock(&dev_priv->sb_lock);
-- 
2.18.0



More information about the Intel-gfx-trybot mailing list