[PATCH v8 2/3] drm/i915: Wait for PSR exit before checking for vblank evasion

[Tarun Vyas]

The PIPEDSL freezes on PSR entry and if PSR hasn't fully exited, then
the pipe_update_start call schedules itself out to check back later.

On ChromeOS-4.4 kernel, which is fairly up-to-date w.r.t drm/i915 but
lags w.r.t core kernel code, hot plugging an external display triggers
tons of "potential atomic update errors" in the dmesg, on *pipe A*. A
closer analysis reveals that we try to read the scanline 3 times and
eventually timeout, b/c PSR hasn't exited fully leading to a PIPEDSL
stuck @ 1599. This issue is not seen on upstream kernels, b/c for *some*
reason we loop inside intel_pipe_update start for ~2+ msec which in this
case is more than enough to exit PSR fully, hence an *unstuck* PIPEDSL
counter, hence no error. On the other hand, the ChromeOS kernel spends
~1.1 msec looping inside intel_pipe_update_start and hence errors out
b/c the source is still in PSR.

Regardless, we should wait for PSR exit (if PSR is disabled, we incur
a ~1-2 usec penalty) before reading the PIPEDSL, b/c if we haven't
fully exited PSR, then checking for vblank evasion isn't actually
applicable.

v4: Comment explaining psr_wait after enabling VBL interrupts (DK)

v5: CAN_PSR() to handle platforms that don't support PSR.

v6: Handle local_irq_disable on early return (Chris)

Signed-off-by: Tarun Vyas <tarun.vyas at intel.com>
---
 drivers/gpu/drm/i915/intel_sprite.c | 20 ++++++++++++++++----
 1 file changed, 16 insertions(+), 4 deletions(-)

diff --git a/drivers/gpu/drm/i915/intel_sprite.c b/drivers/gpu/drm/i915/intel_sprite.c
index 344c0e709b19..4990d6e84ddf 100644
--- a/drivers/gpu/drm/i915/intel_sprite.c
+++ b/drivers/gpu/drm/i915/intel_sprite.c
@@ -107,13 +107,21 @@ void intel_pipe_update_start(const struct intel_crtc_state *new_crtc_state)
 						      VBLANK_EVASION_TIME_US);
 	max = vblank_start - 1;
 
-	local_irq_disable();
-
 	if (min <= 0 || max <= 0)
-		return;
+		goto irq_disable;
 
 	if (WARN_ON(drm_crtc_vblank_get(&crtc->base)))
-		return;
+		goto irq_disable;
+
+	/*
+	 * Wait for psr to idle out after enabling the VBL interrupts
+	 * VBL interrupts will start the PSR exit and prevent a PSR
+	 * re-entry as well.
+	 */
+	if (CAN_PSR(dev_priv) && intel_psr_wait_for_idle(dev_priv))
+		DRM_ERROR("PSR idle timed out, atomic update may fail\n");
+
+	local_irq_disable();
 
 	crtc->debug.min_vbl = min;
 	crtc->debug.max_vbl = max;
@@ -171,6 +179,10 @@ void intel_pipe_update_start(const struct intel_crtc_state *new_crtc_state)
 	crtc->debug.start_vbl_count = intel_crtc_get_vblank_counter(crtc);
 
 	trace_i915_pipe_update_vblank_evaded(crtc);
+	return;
+
+irq_disable:
+	local_irq_disable();
 }
 
 /**
-- 
2.13.5