[PATCH 12/27] drm/i915: Move sandybride pcode access to intel_sideband.c

Chris Wilson chris at chris-wilson.co.uk
Fri Mar 9 21:26:59 UTC 2018


sandybride_pcode is another sideband, so move it to their new home.

Signed-off-by: Chris Wilson <chris at chris-wilson.co.uk>
---
 drivers/gpu/drm/i915/i915_drv.h       |  10 --
 drivers/gpu/drm/i915/intel_hdcp.c     |   3 +-
 drivers/gpu/drm/i915/intel_pm.c       | 194 ----------------------------------
 drivers/gpu/drm/i915/intel_sideband.c | 194 ++++++++++++++++++++++++++++++++++
 drivers/gpu/drm/i915/intel_sideband.h |  10 ++
 5 files changed, 206 insertions(+), 205 deletions(-)

diff --git a/drivers/gpu/drm/i915/i915_drv.h b/drivers/gpu/drm/i915/i915_drv.h
index ec6869fe72d1..fccf84e3db3b 100644
--- a/drivers/gpu/drm/i915/i915_drv.h
+++ b/drivers/gpu/drm/i915/i915_drv.h
@@ -3751,16 +3751,6 @@ intel_display_capture_error_state(struct drm_i915_private *dev_priv);
 extern void intel_display_print_error_state(struct drm_i915_error_state_buf *e,
 					    struct intel_display_error_state *error);
 
-int sandybridge_pcode_read(struct drm_i915_private *dev_priv, u32 mbox, u32 *val);
-int sandybridge_pcode_write_timeout(struct drm_i915_private *dev_priv, u32 mbox,
-				    u32 val, int fast_timeout_us,
-				    int slow_timeout_ms);
-#define sandybridge_pcode_write(dev_priv, mbox, val)	\
-	sandybridge_pcode_write_timeout(dev_priv, mbox, val, 500, 0)
-
-int skl_pcode_request(struct drm_i915_private *dev_priv, u32 mbox, u32 request,
-		      u32 reply_mask, u32 reply, int timeout_base_ms);
-
 /* intel_dpio_phy.c */
 void bxt_port_to_phy_channel(struct drm_i915_private *dev_priv, enum port port,
 			     enum dpio_phy *phy, enum dpio_channel *ch);
diff --git a/drivers/gpu/drm/i915/intel_hdcp.c b/drivers/gpu/drm/i915/intel_hdcp.c
index 81259a4fbdfd..18d06dde3fe5 100644
--- a/drivers/gpu/drm/i915/intel_hdcp.c
+++ b/drivers/gpu/drm/i915/intel_hdcp.c
@@ -11,8 +11,9 @@
 #include <linux/i2c.h>
 #include <linux/random.h>
 
-#include "intel_drv.h"
 #include "i915_reg.h"
+#include "intel_drv.h"
+#include "intel_sideband.h"
 
 #define KEY_LOAD_TRIES	5
 
diff --git a/drivers/gpu/drm/i915/intel_pm.c b/drivers/gpu/drm/i915/intel_pm.c
index 6259c95ce293..447811c5be35 100644
--- a/drivers/gpu/drm/i915/intel_pm.c
+++ b/drivers/gpu/drm/i915/intel_pm.c
@@ -9159,200 +9159,6 @@ void intel_init_pm(struct drm_i915_private *dev_priv)
 	}
 }
 
-static inline int gen6_check_mailbox_status(struct drm_i915_private *dev_priv,
-					    u32 mbox)
-{
-	switch (mbox & GEN6_PCODE_ERROR_MASK) {
-	case GEN6_PCODE_SUCCESS:
-		return 0;
-	case GEN6_PCODE_UNIMPLEMENTED_CMD:
-		return -ENODEV;
-	case GEN6_PCODE_ILLEGAL_CMD:
-		return -ENXIO;
-	case GEN6_PCODE_MIN_FREQ_TABLE_GT_RATIO_OUT_OF_RANGE:
-	case GEN7_PCODE_MIN_FREQ_TABLE_GT_RATIO_OUT_OF_RANGE:
-		return -EOVERFLOW;
-	case GEN6_PCODE_TIMEOUT:
-		return -ETIMEDOUT;
-	default:
-		MISSING_CASE(mbox & GEN6_PCODE_ERROR_MASK);
-		return 0;
-	}
-}
-
-static inline int gen7_check_mailbox_status(struct drm_i915_private *dev_priv,
-					    u32 mbox)
-{
-	switch (mbox & GEN6_PCODE_ERROR_MASK) {
-	case GEN6_PCODE_SUCCESS:
-		return 0;
-	case GEN6_PCODE_ILLEGAL_CMD:
-		return -ENXIO;
-	case GEN7_PCODE_TIMEOUT:
-		return -ETIMEDOUT;
-	case GEN7_PCODE_ILLEGAL_DATA:
-		return -EINVAL;
-	case GEN7_PCODE_MIN_FREQ_TABLE_GT_RATIO_OUT_OF_RANGE:
-		return -EOVERFLOW;
-	default:
-		MISSING_CASE(mbox & GEN6_PCODE_ERROR_MASK);
-		return 0;
-	}
-}
-
-static int __sandybridge_pcode_rw(struct drm_i915_private *dev_priv,
-				  u32 mbox, u32 *val,
-				  int fast_timeout_us,
-				  int slow_timeout_ms,
-				  bool is_read)
-{
-	lockdep_assert_held(&dev_priv->sb_lock);
-
-	/*
-	 * GEN6_PCODE_* are outside of the forcewake domain, we can
-	 * use te fw I915_READ variants to reduce the amount of work
-	 * required when reading/writing.
-	 */
-
-	if (I915_READ_FW(GEN6_PCODE_MAILBOX) & GEN6_PCODE_READY)
-		return -EAGAIN;
-
-	I915_WRITE_FW(GEN6_PCODE_DATA, *val);
-	I915_WRITE_FW(GEN6_PCODE_DATA1, 0);
-	I915_WRITE_FW(GEN6_PCODE_MAILBOX, GEN6_PCODE_READY | mbox);
-
-	if (__intel_wait_for_register_fw(dev_priv,
-					 GEN6_PCODE_MAILBOX, GEN6_PCODE_READY, 0,
-					 fast_timeout_us,
-					 slow_timeout_ms,
-					 &mbox))
-		return -ETIMEDOUT;
-
-	if (is_read)
-		*val = I915_READ_FW(GEN6_PCODE_DATA);
-
-	if (INTEL_GEN(dev_priv) > 6)
-		return gen7_check_mailbox_status(dev_priv, mbox);
-	else
-		return gen6_check_mailbox_status(dev_priv, mbox);
-}
-
-int sandybridge_pcode_read(struct drm_i915_private *dev_priv, u32 mbox, u32 *val)
-{
-	int err;
-
-	mutex_lock(&dev_priv->sb_lock);
-	err = __sandybridge_pcode_rw(dev_priv, mbox, val,
-				    500, 0,
-				    true);
-	mutex_unlock(&dev_priv->sb_lock);
-
-	if (err) {
-		DRM_DEBUG_DRIVER("warning: pcode (read from mbox %x) mailbox access failed for %ps: %d\n",
-				 mbox, __builtin_return_address(0), err);
-	}
-
-	return err;
-}
-
-int sandybridge_pcode_write_timeout(struct drm_i915_private *dev_priv,
-				    u32 mbox, u32 val,
-				    int fast_timeout_us,
-				    int slow_timeout_ms)
-{
-	int err;
-
-	mutex_lock(&dev_priv->sb_lock);
-	err = __sandybridge_pcode_rw(dev_priv, mbox, &val,
-				     fast_timeout_us, slow_timeout_ms,
-				     false);
-	mutex_unlock(&dev_priv->sb_lock);
-
-	if (err) {
-		DRM_DEBUG_DRIVER("warning: pcode (write of 0x%08x to mbox %x) mailbox access failed for %ps: %d\n",
-				 val, mbox, __builtin_return_address(0), err);
-	}
-
-	return err;
-}
-
-static bool skl_pcode_try_request(struct drm_i915_private *dev_priv, u32 mbox,
-				  u32 request, u32 reply_mask, u32 reply,
-				  u32 *status)
-{
-	*status = __sandybridge_pcode_rw(dev_priv, mbox, &request,
-					 500, 0,
-					 true);
-
-	return *status || ((request & reply_mask) == reply);
-}
-
-/**
- * skl_pcode_request - send PCODE request until acknowledgment
- * @dev_priv: device private
- * @mbox: PCODE mailbox ID the request is targeted for
- * @request: request ID
- * @reply_mask: mask used to check for request acknowledgment
- * @reply: value used to check for request acknowledgment
- * @timeout_base_ms: timeout for polling with preemption enabled
- *
- * Keep resending the @request to @mbox until PCODE acknowledges it, PCODE
- * reports an error or an overall timeout of @timeout_base_ms+50 ms expires.
- * The request is acknowledged once the PCODE reply dword equals @reply after
- * applying @reply_mask. Polling is first attempted with preemption enabled
- * for @timeout_base_ms and if this times out for another 50 ms with
- * preemption disabled.
- *
- * Returns 0 on success, %-ETIMEDOUT in case of a timeout, <0 in case of some
- * other error as reported by PCODE.
- */
-int skl_pcode_request(struct drm_i915_private *dev_priv, u32 mbox, u32 request,
-		      u32 reply_mask, u32 reply, int timeout_base_ms)
-{
-	u32 status;
-	int ret;
-
-	mutex_lock(&dev_priv->sb_lock);
-
-#define COND skl_pcode_try_request(dev_priv, mbox, request, reply_mask, reply, \
-				   &status)
-
-	/*
-	 * Prime the PCODE by doing a request first. Normally it guarantees
-	 * that a subsequent request, at most @timeout_base_ms later, succeeds.
-	 * _wait_for() doesn't guarantee when its passed condition is evaluated
-	 * first, so send the first request explicitly.
-	 */
-	if (COND) {
-		ret = 0;
-		goto out;
-	}
-	ret = _wait_for(COND, timeout_base_ms * 1000, 10, 10);
-	if (!ret)
-		goto out;
-
-	/*
-	 * The above can time out if the number of requests was low (2 in the
-	 * worst case) _and_ PCODE was busy for some reason even after a
-	 * (queued) request and @timeout_base_ms delay. As a workaround retry
-	 * the poll with preemption disabled to maximize the number of
-	 * requests. Increase the timeout from @timeout_base_ms to 50ms to
-	 * account for interrupts that could reduce the number of these
-	 * requests, and for any quirks of the PCODE firmware that delays
-	 * the request completion.
-	 */
-	DRM_DEBUG_KMS("PCODE timeout, retrying with preemption disabled\n");
-	WARN_ON_ONCE(timeout_base_ms > 3);
-	preempt_disable();
-	ret = wait_for_atomic(COND, 50);
-	preempt_enable();
-
-out:
-	mutex_unlock(&dev_priv->sb_lock);
-	return ret ? ret : status;
-#undef COND
-}
-
 static int byt_gpu_freq(struct drm_i915_private *dev_priv, int val)
 {
 	struct intel_rps *rps = &dev_priv->gt_pm.rps;
diff --git a/drivers/gpu/drm/i915/intel_sideband.c b/drivers/gpu/drm/i915/intel_sideband.c
index e5faebb511ae..b84cbff29a73 100644
--- a/drivers/gpu/drm/i915/intel_sideband.c
+++ b/drivers/gpu/drm/i915/intel_sideband.c
@@ -384,3 +384,197 @@ void vlv_flisdsi_put(struct drm_i915_private *dev_priv)
 {
 	vlv_iosf_sb_put(dev_priv, BIT(VLV_IOSF_SB_FLISDSI));
 }
+
+static inline int gen6_check_mailbox_status(struct drm_i915_private *dev_priv,
+					    u32 mbox)
+{
+	switch (mbox & GEN6_PCODE_ERROR_MASK) {
+	case GEN6_PCODE_SUCCESS:
+		return 0;
+	case GEN6_PCODE_UNIMPLEMENTED_CMD:
+		return -ENODEV;
+	case GEN6_PCODE_ILLEGAL_CMD:
+		return -ENXIO;
+	case GEN6_PCODE_MIN_FREQ_TABLE_GT_RATIO_OUT_OF_RANGE:
+	case GEN7_PCODE_MIN_FREQ_TABLE_GT_RATIO_OUT_OF_RANGE:
+		return -EOVERFLOW;
+	case GEN6_PCODE_TIMEOUT:
+		return -ETIMEDOUT;
+	default:
+		MISSING_CASE(mbox & GEN6_PCODE_ERROR_MASK);
+		return 0;
+	}
+}
+
+static inline int gen7_check_mailbox_status(struct drm_i915_private *dev_priv,
+					    u32 mbox)
+{
+	switch (mbox & GEN6_PCODE_ERROR_MASK) {
+	case GEN6_PCODE_SUCCESS:
+		return 0;
+	case GEN6_PCODE_ILLEGAL_CMD:
+		return -ENXIO;
+	case GEN7_PCODE_TIMEOUT:
+		return -ETIMEDOUT;
+	case GEN7_PCODE_ILLEGAL_DATA:
+		return -EINVAL;
+	case GEN7_PCODE_MIN_FREQ_TABLE_GT_RATIO_OUT_OF_RANGE:
+		return -EOVERFLOW;
+	default:
+		MISSING_CASE(mbox & GEN6_PCODE_ERROR_MASK);
+		return 0;
+	}
+}
+
+static int __sandybridge_pcode_rw(struct drm_i915_private *dev_priv,
+				  u32 mbox, u32 *val,
+				  int fast_timeout_us,
+				  int slow_timeout_ms,
+				  bool is_read)
+{
+	lockdep_assert_held(&dev_priv->sb_lock);
+
+	/*
+	 * GEN6_PCODE_* are outside of the forcewake domain, we can
+	 * use te fw I915_READ variants to reduce the amount of work
+	 * required when reading/writing.
+	 */
+
+	if (I915_READ_FW(GEN6_PCODE_MAILBOX) & GEN6_PCODE_READY)
+		return -EAGAIN;
+
+	I915_WRITE_FW(GEN6_PCODE_DATA, *val);
+	I915_WRITE_FW(GEN6_PCODE_DATA1, 0);
+	I915_WRITE_FW(GEN6_PCODE_MAILBOX, GEN6_PCODE_READY | mbox);
+
+	if (__intel_wait_for_register_fw(dev_priv,
+					 GEN6_PCODE_MAILBOX, GEN6_PCODE_READY, 0,
+					 fast_timeout_us,
+					 slow_timeout_ms,
+					 &mbox))
+		return -ETIMEDOUT;
+
+	if (is_read)
+		*val = I915_READ_FW(GEN6_PCODE_DATA);
+
+	if (INTEL_GEN(dev_priv) > 6)
+		return gen7_check_mailbox_status(dev_priv, mbox);
+	else
+		return gen6_check_mailbox_status(dev_priv, mbox);
+}
+
+int sandybridge_pcode_read(struct drm_i915_private *dev_priv, u32 mbox, u32 *val)
+{
+	int err;
+
+	mutex_lock(&dev_priv->sb_lock);
+	err = __sandybridge_pcode_rw(dev_priv, mbox, val,
+				    500, 0,
+				    true);
+	mutex_unlock(&dev_priv->sb_lock);
+
+	if (err) {
+		DRM_DEBUG_DRIVER("warning: pcode (read from mbox %x) mailbox access failed for %ps: %d\n",
+				 mbox, __builtin_return_address(0), err);
+	}
+
+	return err;
+}
+
+int sandybridge_pcode_write_timeout(struct drm_i915_private *dev_priv,
+				    u32 mbox, u32 val,
+				    int fast_timeout_us,
+				    int slow_timeout_ms)
+{
+	int err;
+
+	mutex_lock(&dev_priv->sb_lock);
+	err = __sandybridge_pcode_rw(dev_priv, mbox, &val,
+				     fast_timeout_us, slow_timeout_ms,
+				     false);
+	mutex_unlock(&dev_priv->sb_lock);
+
+	if (err) {
+		DRM_DEBUG_DRIVER("warning: pcode (write of 0x%08x to mbox %x) mailbox access failed for %ps: %d\n",
+				 val, mbox, __builtin_return_address(0), err);
+	}
+
+	return err;
+}
+
+static bool skl_pcode_try_request(struct drm_i915_private *dev_priv, u32 mbox,
+				  u32 request, u32 reply_mask, u32 reply,
+				  u32 *status)
+{
+	*status = __sandybridge_pcode_rw(dev_priv, mbox, &request,
+					 500, 0,
+					 true);
+
+	return *status || ((request & reply_mask) == reply);
+}
+
+/**
+ * skl_pcode_request - send PCODE request until acknowledgment
+ * @dev_priv: device private
+ * @mbox: PCODE mailbox ID the request is targeted for
+ * @request: request ID
+ * @reply_mask: mask used to check for request acknowledgment
+ * @reply: value used to check for request acknowledgment
+ * @timeout_base_ms: timeout for polling with preemption enabled
+ *
+ * Keep resending the @request to @mbox until PCODE acknowledges it, PCODE
+ * reports an error or an overall timeout of @timeout_base_ms+50 ms expires.
+ * The request is acknowledged once the PCODE reply dword equals @reply after
+ * applying @reply_mask. Polling is first attempted with preemption enabled
+ * for @timeout_base_ms and if this times out for another 50 ms with
+ * preemption disabled.
+ *
+ * Returns 0 on success, %-ETIMEDOUT in case of a timeout, <0 in case of some
+ * other error as reported by PCODE.
+ */
+int skl_pcode_request(struct drm_i915_private *dev_priv, u32 mbox, u32 request,
+		      u32 reply_mask, u32 reply, int timeout_base_ms)
+{
+	u32 status;
+	int ret;
+
+	mutex_lock(&dev_priv->sb_lock);
+
+#define COND skl_pcode_try_request(dev_priv, mbox, request, reply_mask, reply, \
+				   &status)
+
+	/*
+	 * Prime the PCODE by doing a request first. Normally it guarantees
+	 * that a subsequent request, at most @timeout_base_ms later, succeeds.
+	 * _wait_for() doesn't guarantee when its passed condition is evaluated
+	 * first, so send the first request explicitly.
+	 */
+	if (COND) {
+		ret = 0;
+		goto out;
+	}
+	ret = _wait_for(COND, timeout_base_ms * 1000, 10, 10);
+	if (!ret)
+		goto out;
+
+	/*
+	 * The above can time out if the number of requests was low (2 in the
+	 * worst case) _and_ PCODE was busy for some reason even after a
+	 * (queued) request and @timeout_base_ms delay. As a workaround retry
+	 * the poll with preemption disabled to maximize the number of
+	 * requests. Increase the timeout from @timeout_base_ms to 50ms to
+	 * account for interrupts that could reduce the number of these
+	 * requests, and for any quirks of the PCODE firmware that delays
+	 * the request completion.
+	 */
+	DRM_DEBUG_KMS("PCODE timeout, retrying with preemption disabled\n");
+	WARN_ON_ONCE(timeout_base_ms > 3);
+	preempt_disable();
+	ret = wait_for_atomic(COND, 50);
+	preempt_enable();
+
+out:
+	mutex_unlock(&dev_priv->sb_lock);
+	return ret ? ret : status;
+#undef COND
+}
diff --git a/drivers/gpu/drm/i915/intel_sideband.h b/drivers/gpu/drm/i915/intel_sideband.h
index 46e917dd3973..684d6cd5df30 100644
--- a/drivers/gpu/drm/i915/intel_sideband.h
+++ b/drivers/gpu/drm/i915/intel_sideband.h
@@ -68,4 +68,14 @@ u32 intel_sbi_read(struct drm_i915_private *dev_priv, u16 reg,
 void intel_sbi_write(struct drm_i915_private *dev_priv, u16 reg, u32 value,
 		     enum intel_sbi_destination destination);
 
+int sandybridge_pcode_read(struct drm_i915_private *dev_priv, u32 mbox, u32 *val);
+int sandybridge_pcode_write_timeout(struct drm_i915_private *dev_priv, u32 mbox,
+				    u32 val, int fast_timeout_us,
+				    int slow_timeout_ms);
+#define sandybridge_pcode_write(dev_priv, mbox, val)	\
+	sandybridge_pcode_write_timeout(dev_priv, mbox, val, 500, 0)
+
+int skl_pcode_request(struct drm_i915_private *dev_priv, u32 mbox, u32 request,
+		      u32 reply_mask, u32 reply, int timeout_base_ms);
+
 #endif /* _INTEL_SIDEBAND_H */
-- 
2.16.2



More information about the Intel-gfx-trybot mailing list