March 2018 Archives by thread
Starting: Thu Mar 1 00:19:19 UTC 2018
Ending: Sat Mar 31 00:44:54 UTC 2018
Messages: 1974
- [PATCH v11 1/6] drm/i915/guc: Rename guc_ggtt_offset to intel_guc_ggtt_offset
Jackie Li
- [PATCH v11 4/6] drm/i915: Add HuC firmware size related restriction for Gen9 and CNL A0
Jackie Li
- [PATCH 01/11] lib/scatterlist: Tidy types and fix overflow checking in sgl_alloc_order
Tvrtko Ursulin
- [PATCH 02/11] lib/scatterlist: Skip requesting zeroed allocations in sgl_alloc_order
Tvrtko Ursulin
- [PATCH 03/11] lib/scatterlist: Do not leak pages when high-order allocation fails
Tvrtko Ursulin
- [PATCH 04/11] lib/scatterlist: Extract scatterlist allocation from __sg_alloc_table
Tvrtko Ursulin
- [PATCH v12 1/6] drm/i915/guc: Rename guc_ggtt_offset to intel_guc_ggtt_offset
Jackie Li
- [PATCH v12 3/6] drm/i915: Add support to return CNL specific reserved WOPCM size
Jackie Li
- [PATCH v12 4/6] drm/i915: Add HuC firmware size related restriction for Gen9 and CNL A0
Jackie Li
- [PATCH v12 5/6] drm/i915/guc: Check the locking status of GuC WOPCM registers
Jackie Li
- [PATCH 1/3] drm/i915/guc: Introduce GuC buffer object
Jackie Li
- [PATCH 2/3] drm/i915/guc: Use GuC BO API for firmware DMA
Jackie Li
- [PATCH 3/3] drm/i915/guc: Extend GuC BO to HuC FW authentication
Jackie Li
- [PATCH 01/15] drm/i915: Clean up ADPA pipe select bits
Ville Syrjala
- [PATCH 1/4] drm/i915/guc: Introduce GuC buffer object
Jackie Li
- [PATCH 4/4] HAX Enable GuC Submission for CI
Jackie Li
- [PATCH 1/2] drm/i915/breadcrumbs: Reduce signaler rbtree to a sorted list
Chris Wilson
- [PATCH 1/2] drm/i915: Stop engines around GPU reset preparations
Chris Wilson
- [PATCH 2/2] drm/i915: Wrap engine->schedule in RCU locks for set-wedge protection
Chris Wilson
- [PATCH] drm/i915: Wrap engine->schedule in RCU locks for set-wedge protection
Chris Wilson
- [PATCH 1/2] drm/i915: Wrap engine->schedule in RCU locks for set-wedge protection
Chris Wilson
- [PATCH 1/3] drm/i915: Wrap engine->schedule in RCU locks for set-wedge protection
Chris Wilson
- [PATCH 01/15] drm/i915/guc: Tidy guc_log_control
Michał Winiarski
- [PATCH 1/5] drm/i915: Assert that the request is indeed complete when signaled from irq
Chris Wilson
- [PATCH 1/6] drm/i915: Assert that the request is indeed complete when signaled from irq
Chris Wilson
- [PATCH 1/4] drm/i915: Stop kicking the signaling thread on seqno wraparound
Chris Wilson
- [PATCH] drm/i915/psr: Update PSR2 resolution check for Cannonlake
Dhinakaran Pandiyan
- [PATCH 1/3] drm/i915/frontbuffer: Pull frontbuffer_flush out of gem_obj_pin_to_display
Dhinakaran Pandiyan
- [PATCH 00/17] Add NV12 support
Vidya Srinivas
- [PATCH 1/6] drm/i915: Stop kicking the signaling thread on seqno wraparound
Chris Wilson
- [PATCH 0/3] CNL port refactoring
Mahesh Kumar
- [PATCH 1/7] drm/i915: Assert that the request is indeed complete when signaled from irq
Chris Wilson
- [PATCH v2 00/42] drm/i915: Implement HDCP2.2
Ramalingam C
- [PATCH v2 01/42] drm: hdcp2.2 authentication msg definitions
Ramalingam C
- [PATCH 01/42] drm/i915: Kick the rps worker when changing the boost frequency
Chris Wilson
- [PATCH 0/3] drm/i915/uc: Sanitize uC
Michal Wajdeczko
- [PATCH v2 1/3] drm/i915: store all mmio bases in intel_engines
Daniele Ceraolo Spurio
- [PATCH 01/41] drm/i915: Show GEM_TRACE when detecting a failed GPU idle
Chris Wilson
- [PATCH 01/33] drm/i915: Show GEM_TRACE when detecting a failed GPU idle
Chris Wilson
- [RFC v3 0/8] Add Plane Color Properties
Uma Shankar
- [PATCH 01/14] drm/i915: Show GEM_TRACE when detecting a failed GPU idle
Chris Wilson
- [PATCH 01/18] drm/i915: Show GEM_TRACE when detecting a failed GPU idle
Chris Wilson
- [PATCH 01/21] drm/i915: Show GEM_TRACE when detecting a failed GPU idle
Chris Wilson
- [PATCH 01/24] drm/i915: Show GEM_TRACE when detecting a failed GPU idle
Chris Wilson
- [PATCH 01/27] drm/i915: Show GEM_TRACE when detecting a failed GPU idle
Chris Wilson
- [PATCH 01/29] drm/i915: Show GEM_TRACE when detecting a failed GPU idle
Chris Wilson
- [PATCH 01/22] drm/i915: Show GEM_TRACE when detecting a failed GPU idle
Chris Wilson
- [PATCH 01/23] drm/i915: Show GEM_TRACE when detecting a failed GPU idle
Chris Wilson
- [PATCH v3 0/2] CNL port refactoring
Mahesh Kumar
- [PATCH 01/35] drm/i915/stolen: Switch from DEBUG_KMS to DEBUG_DRIVER
Chris Wilson
- [PATCH 01/24] drm/i915/stolen: Switch from DEBUG_KMS to DEBUG_DRIVER
Chris Wilson
- [PATCH 1/2] drm/i915/uc: Disable GuC submission on suspend
Michal Wajdeczko
- [PATCH 2/2] HAX: Enable GuC for CI
Michal Wajdeczko
- [PATCH v4 1/5] drm/i915/uc: Disable GuC submission on suspend
Michal Wajdeczko
- [PATCH v4 2/5] drm/i915/uc: Use correct error code for GuC initialization failure
Michal Wajdeczko
- [PATCH v4 3/5] drm/i915/uc: Use helper functions to detect fw load status
Michal Wajdeczko
- [PATCH v4 4/5] drm/i915/uc: Trivial s/dev_priv/i915 in intel_uc.c
Michal Wajdeczko
- [PATCH v4 5/5] HAX: Enable GuC for CI
Michal Wajdeczko
- [PATCH v13 1/6] drm/i915/guc: Rename guc_ggtt_offset to intel_guc_ggtt_offset
Jackie Li
- [PATCH v13 2/6] drm/i915: Implement dynamic GuC WOPCM offset and size calculation
Jackie Li
- [PATCH v13 3/6] drm/i915: Add support to return CNL specific reserved WOPCM size
Jackie Li
- [PATCH v13 5/6] drm/i915/guc: Check the locking status of GuC WOPCM registers
Jackie Li
- [PATCH 01/37] drm/i915/stolen: Switch from DEBUG_KMS to DEBUG_DRIVER
Chris Wilson
- [PATCH 01/36] drm/i915/stolen: Switch from DEBUG_KMS to DEBUG_DRIVER
Chris Wilson
- [PATCH 1/2] drm/i915/icl: track dbuf slice-2 status
Mahesh Kumar
- [PATCH 2/2] drm/i915/icl: Enable 2nd DBuf slice only when needed
Mahesh Kumar
- [PATCH] When Vtd is enabled, add and clear padding before and after the surface for scanout buffers instead of clearing the full range of GGTT during i915 startup. This reduces i915 startup time by about 100ms. Note that adding padding before the beginning of the surface is required for rotated surfaces.
edmund.j.dea at intel.com
- [PATCH] When Vtd is enabled for GEN9+ platforms, clear padding before and after displayable surface instead of clearing the full range of GGTT during i915 startup. This reduces i915 startup time. Note that adding padding before the beginning of the surface is required for rotated surfaces.
edmund.j.dea at intel.com
- [PATCH v14 00/17] Add NV12 support
Vidya Srinivas
- [PATCH v9 00/11] Aspect ratio support in DRM layer
Nautiyal, Ankit K
- [PATCH v9 01/11] drm/modes: Introduce drm_mode_match()
Nautiyal, Ankit K
- [PATCH v9 02/11] drm/edid: Use drm_mode_match_no_clocks_no_stereo() for consistentcy
Nautiyal, Ankit K
- [PATCH v9 03/11] drm/edid: Fix cea mode aspect ratio handling
Nautiyal, Ankit K
- [PATCH v9 04/11] drm/edid: Don't send bogus aspect ratios in AVI infoframes
Nautiyal, Ankit K
- [PATCH v9 05/11] video/hdmi: Reject illegal picture aspect ratios
Nautiyal, Ankit K
- [PATCH v9 06/11] drm: Add DRM client cap for aspect-ratio
Nautiyal, Ankit K
- [PATCH v9 07/11] drm: Handle aspect-ratio info in getblob
Nautiyal, Ankit K
- [PATCH v9 08/11] drm: Handle aspect ratio info in legacy and atomic modeset paths
Nautiyal, Ankit K
- [PATCH v9 09/11] drm: Expose modes with aspect ratio, only if requested
Nautiyal, Ankit K
- [PATCH v9 10/11] drm: Add aspect ratio parsing in DRM layer
Nautiyal, Ankit K
- [PATCH v9 11/11] drm: Add and handle new aspect ratios in DRM layer
Nautiyal, Ankit K
- ✓ Fi.CI.BAT: success for Aspect ratio support in DRM layer (rev3)
Patchwork
- ✗ Fi.CI.IGT: failure for Aspect ratio support in DRM layer (rev3)
Patchwork
- [PATCH v9 00/11] Aspect ratio support in DRM layer
Nautiyal, Ankit K
- [PATCH v9 02/11] drm/edid: Use drm_mode_match_no_clocks_no_stereo() for consistentcy
Nautiyal, Ankit K
- [PATCH v9 03/11] drm/edid: Fix cea mode aspect ratio handling
Nautiyal, Ankit K
- [PATCH v9 04/11] drm/edid: Don't send bogus aspect ratios in AVI infoframes
Nautiyal, Ankit K
- [PATCH v9 05/11] video/hdmi: Reject illegal picture aspect ratios
Nautiyal, Ankit K
- [PATCH v9 06/11] drm: Add DRM client cap for aspect-ratio
Nautiyal, Ankit K
- [PATCH v9 07/11] drm: Handle aspect-ratio info in getblob
Nautiyal, Ankit K
- [PATCH v9 08/11] drm: Handle aspect ratio info in legacy and atomic modeset paths
Nautiyal, Ankit K
- [PATCH v9 09/11] drm: Expose modes with aspect ratio, only if requested
Nautiyal, Ankit K
- [PATCH v9 10/11] drm: Add aspect ratio parsing in DRM layer
Nautiyal, Ankit K
- [PATCH v9 11/11] drm: Add and handle new aspect ratios in DRM layer
Nautiyal, Ankit K
- ✗ Fi.CI.BAT: failure for Aspect ratio support in DRM layer (rev4)
Patchwork
- [PATCH v9 00/11] Aspect ratio support in DRM layer
Nautiyal, Ankit K
- [PATCH v9 01/11] drm/modes: Introduce drm_mode_match()
Nautiyal, Ankit K
- [PATCH v9 02/11] drm/edid: Use drm_mode_match_no_clocks_no_stereo() for consistentcy
Nautiyal, Ankit K
- [PATCH v9 03/11] drm/edid: Fix cea mode aspect ratio handling
Nautiyal, Ankit K
- [PATCH v9 04/11] drm/edid: Don't send bogus aspect ratios in AVI infoframes
Nautiyal, Ankit K
- [PATCH v9 05/11] video/hdmi: Reject illegal picture aspect ratios
Nautiyal, Ankit K
- [PATCH v9 06/11] drm: Add DRM client cap for aspect-ratio
Nautiyal, Ankit K
- [PATCH v9 07/11] drm: Handle aspect-ratio info in getblob
Nautiyal, Ankit K
- [PATCH v9 08/11] drm: Handle aspect ratio info in legacy and atomic modeset paths
Nautiyal, Ankit K
- [PATCH v9 09/11] drm: Expose modes with aspect ratio, only if requested
Nautiyal, Ankit K
- [PATCH v9 10/11] drm: Add aspect ratio parsing in DRM layer
Nautiyal, Ankit K
- [PATCH v9 11/11] drm: Add and handle new aspect ratios in DRM layer
Nautiyal, Ankit K
- ✗ Fi.CI.BAT: warning for Aspect ratio support in DRM layer (rev5)
Patchwork
- ✗ Fi.CI.BAT: failure for Aspect ratio support in DRM layer (rev5)
Patchwork
- [PATCH 01/12] drm/i915/guc: Keep GuC interrupts enabled when using GuC
Michał Winiarski
- [PATCH 05/12] drm/i915/guc: Split relay control and GuC log level
Michał Winiarski
- [PATCH 06/12] drm/i915/guc: Move check for fast memcpy_wc to relay creation
Michał Winiarski
- [PATCH 07/12] drm/i915/guc: Get rid of GuC log runtime
Michał Winiarski
- [PATCH 08/12] drm/i915/guc: Always print log stats in i915_guc_info when using GuC
Michał Winiarski
- [PATCH 09/12] drm/i915/guc: Don't print out relay statistics when relay is disabled
Michał Winiarski
- [PATCH 10/12] drm/i915/guc: Allow user to control default GuC logging
Michał Winiarski
- [PATCH 11/12] drm/i915/guc: Default to non-verbose GuC logging
Michał Winiarski
- [PATCH 12/12] HAX enable guc for CI
Michał Winiarski
- [PATCH] drm/i915: Replace ggtt_clear_range with ggtt_clear_bo_padding
edmund.j.dea at intel.com
- [PATCH] HAX enable guc for CI
Michał Winiarski
- [PATCH 1/2] no-spin-after-disable
Chris Wilson
- [PATCH] no-spin-after-disable
Chris Wilson
- [PATCH] softirq: Prefer low-latency over ksoftirqd for HI_SOFTIRQ
Chris Wilson
- [PATCH 1/6] softirq: Prefer low-latency over ksoftirqd for HI_SOFTIRQ
Chris Wilson
- [PATCH 1/5] drm/i915: Add control flags to i915_handle_error()
Chris Wilson
- [PATCH 1/2] drm/i915: Add more verification to accept valid locked WOPCM register values
Jackie Li
- [PATCH 2/2] HAX enable guc for CI
Jackie Li
- [PATCH 1/7] drm/i915: move dpll_info to header
Lucas De Marchi
- [PATCH 1/6] drm/i915: Specify which engines to reset following semaphore/event lockups
Chris Wilson
- [PATCH 1/2] drm/i915/uc: Fetch uC firmware in init_early
Michal Wajdeczko
- [RFC 1/3] drm/i915: Init GEM caches in init_early
Michal Wajdeczko
- [PATCH 1/8] drm/i915/guc: Move FW size constraint check back to fetch
Michał Winiarski
- [PATCH 1/2] drm/i915: Add code to accept valid locked WOPCM register values
Jackie Li
- [PATCH 1/3] linux-firmware/guc/cnl: Load GuC on Cannonlake
Anusha Srivatsa
- [PATCH 1/4] drm/i915/execlists: Refactor out complete_preempt_context()
Chris Wilson
- [PATCH v15 00/19] Add NV12 support
Vidya Srinivas
- [PATCH 1/5] drm/i915/execlists: Use a locked clear_bit() for synchronisation with interrupt
Chris Wilson
- [RFC 1/3] drm/i915: Reorder early initialization
Michal Wajdeczko
- [PATCH 1/7] drm/i915/selftests: Include the trace as a debug aide
Chris Wilson
- [PATCH 1/6] drm/i915/guc: Move FW size sanity check back to fetch
Michał Winiarski
- [PATCH v4 0/7] Use correct error code for GuC initialization failure
Michal Wajdeczko
- [PATCH v4 1/7] drm/i915: Correctly handle error path in i915_gem_init_hw
Michal Wajdeczko
- [PATCH v4 2/7] drm/i915/uc: Disable GuC submission during sanitize
Michal Wajdeczko
- [PATCH v4 3/7] drm/i915/uc: Fully sanitize uC in uc_fini_hw
Michal Wajdeczko
- [PATCH v4 4/7] drm/i915/uc: Use correct error code for GuC initialization failure
Michal Wajdeczko
- [PATCH v4 5/7] drm/i915/uc: Use helper functions to detect fw load status
Michal Wajdeczko
- [PATCH v4 6/7] drm/i915/uc: Trivial s/dev_priv/i915 in intel_uc.c
Michal Wajdeczko
- [PATCH v4 7/7] HAX: Enable GuC for CI
Michal Wajdeczko
- [PATCH 1/5] drm/i915: Sysfs interface to get GFX shmem usage stats per process
Praveen Paneri
- [PATCH v4 00/13] drm/i915/guc: Support for Guc responses and requests
Michal Wajdeczko
- [PATCH v4 03/13] drm/i915/guc: Prepare send() function to accept bigger response
Michal Wajdeczko
- [PATCH 1/8] drm/i915/selftests: Include the trace as a debug aide
Chris Wilson
- [PATCH 1/2] drm/i915: Always do WOPCM partitioning based on real firmware size
Jackie Li
- [PATCH 2/2] drm/i915: Always set HUC_LOADING_AGENT_GUC bit in WOPCM offset register
Jackie Li
- [PATCH 1/3] drm/i915: Always do WOPCM partitioning based on real firmware size
Jackie Li
- [PATCH 3/3] HAX enable guc for CI
Jackie Li
- [PATCH v16 00/18] Add NV12 support
Vidya Srinivas
- [PATCH 00/10] drm/i915/perf: cleanups
Lionel Landwerlin
- [PATCH 1/7] drm/i915/guc: Move FW size sanity check back to fetch
Michał Winiarski
- [PATCH v2 1/4] drm/i915: Always do WOPCM partitioning based on real firmware sizes
Jackie Li
- [PATCH v2 2/4] drm/i915: Always set HUC_LOADING_AGENT_GUC bit in WOPCM offset register
Jackie Li
- [PATCH v2 3/4] drm/i915: Add code to accept valid locked WOPCM register values
Jackie Li
- [PATCH v2 4/4] HAX enable guc for CI
Jackie Li
- [PATCH] drm/i915: Actually flush interrupts on reset not just wedging
Chris Wilson
- [PATCH v2 00/11] oa cleanups
Lionel Landwerlin
- [PATCH 1/3] drm/i915: Request driver probe from an async task
Chris Wilson
- [PATCH 01/87] drm/i915: Request driver probe from an async task
Chris Wilson
- [PATCH 1/8] drm/i915/execlists: Avoid kicking the submission too early for rescheduling
Chris Wilson
- [PATCH 2/8] drm/i915/execlists: Clear user-active flag on preemption completion
Chris Wilson
- [PATCH 1/8] drm/i915/guc: Disable rpm wakeref asserts in GuC irq handler
Michał Winiarski
- [PATCH 01/11] drm/i915/execlists: Avoid kicking the submission too early for rescheduling
Chris Wilson
- [PATCH 1/8] drm/i915/guc: Defer GuC message handling to tasklet
Michał Winiarski
- [PATCH] drm/i915/userptr: Wrap mmu_notifier inside its own rw_semaphore
Chris Wilson
- [PATCH 1/4] drm/i915: Enable edp psr error interrupts on hsw
Dhinakaran Pandiyan
- [PATCH v17 00/19] Add NV12 support
Vidya Srinivas
- [PATCH v5 1/8] drm/i915: Correctly handle error path in i915_gem_init_hw
Michal Wajdeczko
- [RFC v6 1/9] drm/i915: Correctly handle error path in i915_gem_init_hw
Michal Wajdeczko
- [RFC v6 2/9] drm/i915/guc: Sanitize engine submission on disable
Michal Wajdeczko
- [RFC v6 3/9] drm/i915/uc: Disable GuC submission during sanitize
Michal Wajdeczko
- [RFC v6 7/9] drm/i915/uc: Use helper functions to detect fw load status
Michal Wajdeczko
- [RFC v6 8/9] drm/i915/uc: Trivial s/dev_priv/i915 in intel_uc.c
Michal Wajdeczko
- [PATCH 01/17] drm/i915: Only warn for might_sleep() before a slow wait_for_register
Chris Wilson
- [PATCH 1/9] drm/i915/execlists: Refactor out complete_preempt_context()
Chris Wilson
- [PATCH] drm/i915/execlists: Track begin/end of execlists submission sequences
Chris Wilson
- [PATCH 01/18] drm/i915/execlists: Track begin/end of execlists submission sequences
Chris Wilson
- [PATCH 01/19] drm/i915/execlists: Track begin/end of execlists submission sequences
Chris Wilson
- [PATCH 01/19] drm/i915: Avoid sleeping inside per-engine reset
Chris Wilson
- [PATCH v18 00/18] Add NV12 support
Vidya Srinivas
- [PATCH 1/8] drm/i915/execlists: Track begin/end of execlists submission sequences
Chris Wilson
- [PATCH 01/12] drm/i915/execlists: Track begin/end of execlists submission sequences
Chris Wilson
- [PATCH v12 01/17] drm/i915/guc/slpc: Add SLPC control to enable_guc modparam
Sagar Arun Kamble
- [PATCH v12 02/17] drm/i915/guc/slpc: Disable host RPS
Sagar Arun Kamble
- [PATCH v12 03/17] drm/i915/guc/slpc: Lay out SLPC init/enable/disable/fini helpers
Sagar Arun Kamble
- [PATCH v12 04/17] drm/i915/guc/slpc: Enable SLPC in GuC load control params
Sagar Arun Kamble
- [PATCH v12 05/17] drm/i915/guc/slpc: Add SLPC communication interfaces
Sagar Arun Kamble
- [PATCH v12 07/17] drm/i915/guc/slpc: Send RESET event to restart/enable SLPC tasks
Sagar Arun Kamble
- [PATCH v12 08/17] drm/i915/guc/slpc: Send SHUTDOWN event to stop SLPC tasks
Sagar Arun Kamble
- [PATCH v12 09/17] drm/i915/guc/slpc: Reset SLPC on engine reset with flag TDR_OCCURRED
Sagar Arun Kamble
- [PATCH 01/20] trace: Default to using trace_global_clock if sched_clock is unstable
Chris Wilson
- [PATCH 01/18] drm/i915/selftests: Avoid repeatedly harming the same innocent context
Chris Wilson
- [PATCH] test
Chris Wilson
Last message date:
Sat Mar 31 00:44:54 UTC 2018
Archived on: Sat Mar 31 00:44:56 UTC 2018
This archive was generated by
Pipermail 0.09 (Mailman edition).