[PATCH 3/9] drm/i915: Store the default sseu setup on the engine

Chris Wilson chris at chris-wilson.co.uk
Sun Apr 7 13:46:42 UTC 2019


As we push for better compartmentalisation, it is more convenient to
copy the default sseu configuration from the engine into the derived
logical context, than it is to dig it out from i915->runtime_info.

Signed-off-by: Chris Wilson <chris at chris-wilson.co.uk>
---
 drivers/gpu/drm/i915/Makefile                 |   1 +
 drivers/gpu/drm/i915/Makefile.header-test     |   1 +
 drivers/gpu/drm/i915/i915_drv.h               |  14 --
 drivers/gpu/drm/i915/i915_gem_context.c       |   2 +-
 drivers/gpu/drm/i915/i915_perf.c              |   2 +-
 drivers/gpu/drm/i915/intel_context.c          |   4 +-
 drivers/gpu/drm/i915/intel_context_types.h    |  11 +-
 drivers/gpu/drm/i915/intel_device_info.h      |  28 +---
 drivers/gpu/drm/i915/intel_engine_cs.c        |   3 +
 drivers/gpu/drm/i915/intel_engine_types.h     |   3 +
 drivers/gpu/drm/i915/intel_lrc.c              | 134 +----------------
 drivers/gpu/drm/i915/intel_lrc.h              |   2 -
 drivers/gpu/drm/i915/intel_sseu.c             | 142 ++++++++++++++++++
 drivers/gpu/drm/i915/intel_sseu.h             |  67 +++++++++
 .../gpu/drm/i915/selftests/i915_gem_context.c |   5 +-
 15 files changed, 225 insertions(+), 194 deletions(-)
 create mode 100644 drivers/gpu/drm/i915/intel_sseu.c
 create mode 100644 drivers/gpu/drm/i915/intel_sseu.h

diff --git a/drivers/gpu/drm/i915/Makefile b/drivers/gpu/drm/i915/Makefile
index fbcb0904f4a8..53ff209b91bb 100644
--- a/drivers/gpu/drm/i915/Makefile
+++ b/drivers/gpu/drm/i915/Makefile
@@ -95,6 +95,7 @@ i915-y += \
 	  intel_lrc.o \
 	  intel_mocs.o \
 	  intel_ringbuffer.o \
+	  intel_sseu.o \
 	  intel_uncore.o \
 	  intel_wopcm.o
 
diff --git a/drivers/gpu/drm/i915/Makefile.header-test b/drivers/gpu/drm/i915/Makefile.header-test
index f7809b5c21ad..06c5ab1da24e 100644
--- a/drivers/gpu/drm/i915/Makefile.header-test
+++ b/drivers/gpu/drm/i915/Makefile.header-test
@@ -10,6 +10,7 @@ header_test := \
 	i915_timeline_types.h \
 	intel_context_types.h \
 	intel_engine_types.h \
+	intel_sseu.h \
 	intel_workarounds_types.h
 
 quiet_cmd_header_test = HDRTEST $@
diff --git a/drivers/gpu/drm/i915/i915_drv.h b/drivers/gpu/drm/i915/i915_drv.h
index b9bedfa9652d..e328a9f9e1e8 100644
--- a/drivers/gpu/drm/i915/i915_drv.h
+++ b/drivers/gpu/drm/i915/i915_drv.h
@@ -3395,20 +3395,6 @@ mkwrite_device_info(struct drm_i915_private *dev_priv)
 	return (struct intel_device_info *)INTEL_INFO(dev_priv);
 }
 
-static inline struct intel_sseu
-intel_device_default_sseu(struct drm_i915_private *i915)
-{
-	const struct sseu_dev_info *sseu = &RUNTIME_INFO(i915)->sseu;
-	struct intel_sseu value = {
-		.slice_mask = sseu->slice_mask,
-		.subslice_mask = sseu->subslice_mask[0],
-		.min_eus_per_subslice = sseu->max_eus_per_subslice,
-		.max_eus_per_subslice = sseu->max_eus_per_subslice,
-	};
-
-	return value;
-}
-
 /* modesetting */
 extern void intel_modeset_init_hw(struct drm_device *dev);
 extern int intel_modeset_init(struct drm_device *dev);
diff --git a/drivers/gpu/drm/i915/i915_gem_context.c b/drivers/gpu/drm/i915/i915_gem_context.c
index 7fc34ab6df87..0883a879d3e7 100644
--- a/drivers/gpu/drm/i915/i915_gem_context.c
+++ b/drivers/gpu/drm/i915/i915_gem_context.c
@@ -1156,7 +1156,7 @@ static int gen8_emit_rpcs_config(struct i915_request *rq,
 	*cs++ = MI_STORE_DWORD_IMM_GEN4 | MI_USE_GGTT;
 	*cs++ = lower_32_bits(offset);
 	*cs++ = upper_32_bits(offset);
-	*cs++ = gen8_make_rpcs(rq->i915, &sseu);
+	*cs++ = intel_sseu_make_rpcs(rq->i915, &sseu);
 
 	intel_ring_advance(rq, cs);
 
diff --git a/drivers/gpu/drm/i915/i915_perf.c b/drivers/gpu/drm/i915/i915_perf.c
index 39a4804091d7..56da457bed21 100644
--- a/drivers/gpu/drm/i915/i915_perf.c
+++ b/drivers/gpu/drm/i915/i915_perf.c
@@ -1679,7 +1679,7 @@ gen8_update_reg_state_unlocked(struct intel_context *ce,
 
 	CTX_REG(reg_state,
 		CTX_R_PWR_CLK_STATE, GEN8_R_PWR_CLK_STATE,
-		gen8_make_rpcs(i915, &ce->sseu));
+		intel_sseu_make_rpcs(i915, &ce->sseu));
 }
 
 /*
diff --git a/drivers/gpu/drm/i915/intel_context.c b/drivers/gpu/drm/i915/intel_context.c
index 8931e0fee873..961d1445833d 100644
--- a/drivers/gpu/drm/i915/intel_context.c
+++ b/drivers/gpu/drm/i915/intel_context.c
@@ -230,15 +230,13 @@ intel_context_init(struct intel_context *ce,
 	ce->gem_context = ctx;
 	ce->engine = engine;
 	ce->ops = engine->cops;
+	ce->sseu = engine->sseu;
 
 	INIT_LIST_HEAD(&ce->signal_link);
 	INIT_LIST_HEAD(&ce->signals);
 
 	mutex_init(&ce->pin_mutex);
 
-	/* Use the whole device by default */
-	ce->sseu = intel_device_default_sseu(ctx->i915);
-
 	i915_active_request_init(&ce->active_tracker,
 				 NULL, intel_context_retire);
 }
diff --git a/drivers/gpu/drm/i915/intel_context_types.h b/drivers/gpu/drm/i915/intel_context_types.h
index 624729a35875..2109610e21e8 100644
--- a/drivers/gpu/drm/i915/intel_context_types.h
+++ b/drivers/gpu/drm/i915/intel_context_types.h
@@ -14,6 +14,7 @@
 #include <linux/types.h>
 
 #include "i915_active_types.h"
+#include "intel_sseu.h"
 
 struct i915_gem_context;
 struct i915_vma;
@@ -27,16 +28,6 @@ struct intel_context_ops {
 	void (*destroy)(struct kref *kref);
 };
 
-/*
- * Powergating configuration for a particular (context,engine).
- */
-struct intel_sseu {
-	u8 slice_mask;
-	u8 subslice_mask;
-	u8 min_eus_per_subslice;
-	u8 max_eus_per_subslice;
-};
-
 struct intel_context {
 	struct kref ref;
 
diff --git a/drivers/gpu/drm/i915/intel_device_info.h b/drivers/gpu/drm/i915/intel_device_info.h
index 0e579f158016..3045e0dee2a1 100644
--- a/drivers/gpu/drm/i915/intel_device_info.h
+++ b/drivers/gpu/drm/i915/intel_device_info.h
@@ -29,6 +29,7 @@
 
 #include "intel_engine_types.h"
 #include "intel_display.h"
+#include "intel_sseu.h"
 
 struct drm_printer;
 struct drm_i915_private;
@@ -139,33 +140,6 @@ enum intel_ppgtt_type {
 	func(overlay_needs_physical); \
 	func(supports_tv);
 
-#define GEN_MAX_SLICES		(6) /* CNL upper bound */
-#define GEN_MAX_SUBSLICES	(8) /* ICL upper bound */
-
-struct sseu_dev_info {
-	u8 slice_mask;
-	u8 subslice_mask[GEN_MAX_SLICES];
-	u16 eu_total;
-	u8 eu_per_subslice;
-	u8 min_eu_in_pool;
-	/* For each slice, which subslice(s) has(have) 7 EUs (bitfield)? */
-	u8 subslice_7eu[3];
-	u8 has_slice_pg:1;
-	u8 has_subslice_pg:1;
-	u8 has_eu_pg:1;
-
-	/* Topology fields */
-	u8 max_slices;
-	u8 max_subslices;
-	u8 max_eus_per_subslice;
-
-	/* We don't have more than 8 eus per subslice at the moment and as we
-	 * store eus enabled using bits, no need to multiply by eus per
-	 * subslice.
-	 */
-	u8 eu_mask[GEN_MAX_SLICES * GEN_MAX_SUBSLICES];
-};
-
 struct intel_device_info {
 	u16 gen_mask;
 
diff --git a/drivers/gpu/drm/i915/intel_engine_cs.c b/drivers/gpu/drm/i915/intel_engine_cs.c
index d0427c2e3997..d2e64bdb7fbe 100644
--- a/drivers/gpu/drm/i915/intel_engine_cs.c
+++ b/drivers/gpu/drm/i915/intel_engine_cs.c
@@ -715,6 +715,9 @@ int intel_engine_init_common(struct intel_engine_cs *engine)
 	struct drm_i915_private *i915 = engine->i915;
 	int ret;
 
+	/* Use the whole device by default */
+	engine->sseu = intel_device_default_sseu(&RUNTIME_INFO(i915)->sseu);
+
 	/* We may need to do things with the shrinker which
 	 * require us to immediately switch back to the default
 	 * context. This can cause a problem as pinning the
diff --git a/drivers/gpu/drm/i915/intel_engine_types.h b/drivers/gpu/drm/i915/intel_engine_types.h
index 6c6d8a9aca94..60cd1299a8f2 100644
--- a/drivers/gpu/drm/i915/intel_engine_types.h
+++ b/drivers/gpu/drm/i915/intel_engine_types.h
@@ -17,6 +17,7 @@
 #include "i915_priolist_types.h"
 #include "i915_selftest.h"
 #include "i915_timeline_types.h"
+#include "intel_sseu.h"
 #include "intel_workarounds_types.h"
 
 #include "i915_gem_batch_pool.h"
@@ -273,6 +274,8 @@ struct intel_engine_cs {
 	u32 context_size;
 	u32 mmio_base;
 
+	struct intel_sseu sseu;
+
 	struct intel_ring *buffer;
 
 	struct i915_timeline timeline;
diff --git a/drivers/gpu/drm/i915/intel_lrc.c b/drivers/gpu/drm/i915/intel_lrc.c
index 6931dbb2888c..fac3968d7f1b 100644
--- a/drivers/gpu/drm/i915/intel_lrc.c
+++ b/drivers/gpu/drm/i915/intel_lrc.c
@@ -1321,7 +1321,7 @@ __execlists_update_reg_state(struct intel_context *ce,
 	/* RPCS */
 	if (engine->class == RENDER_CLASS)
 		regs[CTX_R_PWR_CLK_STATE + 1] =
-			gen8_make_rpcs(engine->i915, &ce->sseu);
+			intel_sseu_make_rpcs(engine->i915, &ce->sseu);
 }
 
 static int
@@ -2501,138 +2501,6 @@ int logical_xcs_ring_init(struct intel_engine_cs *engine)
 	return logical_ring_init(engine);
 }
 
-u32 gen8_make_rpcs(struct drm_i915_private *i915, struct intel_sseu *req_sseu)
-{
-	const struct sseu_dev_info *sseu = &RUNTIME_INFO(i915)->sseu;
-	bool subslice_pg = sseu->has_subslice_pg;
-	struct intel_sseu ctx_sseu;
-	u8 slices, subslices;
-	u32 rpcs = 0;
-
-	/*
-	 * No explicit RPCS request is needed to ensure full
-	 * slice/subslice/EU enablement prior to Gen9.
-	*/
-	if (INTEL_GEN(i915) < 9)
-		return 0;
-
-	/*
-	 * If i915/perf is active, we want a stable powergating configuration
-	 * on the system.
-	 *
-	 * We could choose full enablement, but on ICL we know there are use
-	 * cases which disable slices for functional, apart for performance
-	 * reasons. So in this case we select a known stable subset.
-	 */
-	if (!i915->perf.oa.exclusive_stream) {
-		ctx_sseu = *req_sseu;
-	} else {
-		ctx_sseu = intel_device_default_sseu(i915);
-
-		if (IS_GEN(i915, 11)) {
-			/*
-			 * We only need subslice count so it doesn't matter
-			 * which ones we select - just turn off low bits in the
-			 * amount of half of all available subslices per slice.
-			 */
-			ctx_sseu.subslice_mask =
-				~(~0 << (hweight8(ctx_sseu.subslice_mask) / 2));
-			ctx_sseu.slice_mask = 0x1;
-		}
-	}
-
-	slices = hweight8(ctx_sseu.slice_mask);
-	subslices = hweight8(ctx_sseu.subslice_mask);
-
-	/*
-	 * Since the SScount bitfield in GEN8_R_PWR_CLK_STATE is only three bits
-	 * wide and Icelake has up to eight subslices, specfial programming is
-	 * needed in order to correctly enable all subslices.
-	 *
-	 * According to documentation software must consider the configuration
-	 * as 2x4x8 and hardware will translate this to 1x8x8.
-	 *
-	 * Furthemore, even though SScount is three bits, maximum documented
-	 * value for it is four. From this some rules/restrictions follow:
-	 *
-	 * 1.
-	 * If enabled subslice count is greater than four, two whole slices must
-	 * be enabled instead.
-	 *
-	 * 2.
-	 * When more than one slice is enabled, hardware ignores the subslice
-	 * count altogether.
-	 *
-	 * From these restrictions it follows that it is not possible to enable
-	 * a count of subslices between the SScount maximum of four restriction,
-	 * and the maximum available number on a particular SKU. Either all
-	 * subslices are enabled, or a count between one and four on the first
-	 * slice.
-	 */
-	if (IS_GEN(i915, 11) &&
-	    slices == 1 &&
-	    subslices > min_t(u8, 4, hweight8(sseu->subslice_mask[0]) / 2)) {
-		GEM_BUG_ON(subslices & 1);
-
-		subslice_pg = false;
-		slices *= 2;
-	}
-
-	/*
-	 * Starting in Gen9, render power gating can leave
-	 * slice/subslice/EU in a partially enabled state. We
-	 * must make an explicit request through RPCS for full
-	 * enablement.
-	*/
-	if (sseu->has_slice_pg) {
-		u32 mask, val = slices;
-
-		if (INTEL_GEN(i915) >= 11) {
-			mask = GEN11_RPCS_S_CNT_MASK;
-			val <<= GEN11_RPCS_S_CNT_SHIFT;
-		} else {
-			mask = GEN8_RPCS_S_CNT_MASK;
-			val <<= GEN8_RPCS_S_CNT_SHIFT;
-		}
-
-		GEM_BUG_ON(val & ~mask);
-		val &= mask;
-
-		rpcs |= GEN8_RPCS_ENABLE | GEN8_RPCS_S_CNT_ENABLE | val;
-	}
-
-	if (subslice_pg) {
-		u32 val = subslices;
-
-		val <<= GEN8_RPCS_SS_CNT_SHIFT;
-
-		GEM_BUG_ON(val & ~GEN8_RPCS_SS_CNT_MASK);
-		val &= GEN8_RPCS_SS_CNT_MASK;
-
-		rpcs |= GEN8_RPCS_ENABLE | GEN8_RPCS_SS_CNT_ENABLE | val;
-	}
-
-	if (sseu->has_eu_pg) {
-		u32 val;
-
-		val = ctx_sseu.min_eus_per_subslice << GEN8_RPCS_EU_MIN_SHIFT;
-		GEM_BUG_ON(val & ~GEN8_RPCS_EU_MIN_MASK);
-		val &= GEN8_RPCS_EU_MIN_MASK;
-
-		rpcs |= val;
-
-		val = ctx_sseu.max_eus_per_subslice << GEN8_RPCS_EU_MAX_SHIFT;
-		GEM_BUG_ON(val & ~GEN8_RPCS_EU_MAX_MASK);
-		val &= GEN8_RPCS_EU_MAX_MASK;
-
-		rpcs |= val;
-
-		rpcs |= GEN8_RPCS_ENABLE;
-	}
-
-	return rpcs;
-}
-
 static u32 intel_lr_indirect_ctx_offset(struct intel_engine_cs *engine)
 {
 	u32 indirect_ctx_offset;
diff --git a/drivers/gpu/drm/i915/intel_lrc.h b/drivers/gpu/drm/i915/intel_lrc.h
index 92642ab91472..72488e293d77 100644
--- a/drivers/gpu/drm/i915/intel_lrc.h
+++ b/drivers/gpu/drm/i915/intel_lrc.h
@@ -112,6 +112,4 @@ void intel_execlists_show_requests(struct intel_engine_cs *engine,
 							const char *prefix),
 				   unsigned int max);
 
-u32 gen8_make_rpcs(struct drm_i915_private *i915, struct intel_sseu *ctx_sseu);
-
 #endif /* _INTEL_LRC_H_ */
diff --git a/drivers/gpu/drm/i915/intel_sseu.c b/drivers/gpu/drm/i915/intel_sseu.c
new file mode 100644
index 000000000000..cfc80813f662
--- /dev/null
+++ b/drivers/gpu/drm/i915/intel_sseu.c
@@ -0,0 +1,142 @@
+/*
+ * SPDX-License-Identifier: MIT
+ *
+ * Copyright © 2019 Intel Corporation
+ */
+
+#include "i915_drv.h"
+#include "intel_lrc_reg.h"
+#include "intel_sseu.h"
+
+u32 intel_sseu_make_rpcs(struct drm_i915_private *i915,
+			 const struct intel_sseu *req_sseu)
+{
+	const struct sseu_dev_info *sseu = &RUNTIME_INFO(i915)->sseu;
+	bool subslice_pg = sseu->has_subslice_pg;
+	struct intel_sseu ctx_sseu;
+	u8 slices, subslices;
+	u32 rpcs = 0;
+
+	/*
+	 * No explicit RPCS request is needed to ensure full
+	 * slice/subslice/EU enablement prior to Gen9.
+	 */
+	if (INTEL_GEN(i915) < 9)
+		return 0;
+
+	/*
+	 * If i915/perf is active, we want a stable powergating configuration
+	 * on the system.
+	 *
+	 * We could choose full enablement, but on ICL we know there are use
+	 * cases which disable slices for functional, apart for performance
+	 * reasons. So in this case we select a known stable subset.
+	 */
+	if (!i915->perf.oa.exclusive_stream) {
+		ctx_sseu = *req_sseu;
+	} else {
+		ctx_sseu = intel_device_default_sseu(sseu);
+
+		if (IS_GEN(i915, 11)) {
+			/*
+			 * We only need subslice count so it doesn't matter
+			 * which ones we select - just turn off low bits in the
+			 * amount of half of all available subslices per slice.
+			 */
+			ctx_sseu.subslice_mask =
+				~(~0 << (hweight8(ctx_sseu.subslice_mask) / 2));
+			ctx_sseu.slice_mask = 0x1;
+		}
+	}
+
+	slices = hweight8(ctx_sseu.slice_mask);
+	subslices = hweight8(ctx_sseu.subslice_mask);
+
+	/*
+	 * Since the SScount bitfield in GEN8_R_PWR_CLK_STATE is only three bits
+	 * wide and Icelake has up to eight subslices, specfial programming is
+	 * needed in order to correctly enable all subslices.
+	 *
+	 * According to documentation software must consider the configuration
+	 * as 2x4x8 and hardware will translate this to 1x8x8.
+	 *
+	 * Furthemore, even though SScount is three bits, maximum documented
+	 * value for it is four. From this some rules/restrictions follow:
+	 *
+	 * 1.
+	 * If enabled subslice count is greater than four, two whole slices must
+	 * be enabled instead.
+	 *
+	 * 2.
+	 * When more than one slice is enabled, hardware ignores the subslice
+	 * count altogether.
+	 *
+	 * From these restrictions it follows that it is not possible to enable
+	 * a count of subslices between the SScount maximum of four restriction,
+	 * and the maximum available number on a particular SKU. Either all
+	 * subslices are enabled, or a count between one and four on the first
+	 * slice.
+	 */
+	if (IS_GEN(i915, 11) &&
+	    slices == 1 &&
+	    subslices > min_t(u8, 4, hweight8(sseu->subslice_mask[0]) / 2)) {
+		GEM_BUG_ON(subslices & 1);
+
+		subslice_pg = false;
+		slices *= 2;
+	}
+
+	/*
+	 * Starting in Gen9, render power gating can leave
+	 * slice/subslice/EU in a partially enabled state. We
+	 * must make an explicit request through RPCS for full
+	 * enablement.
+	 */
+	if (sseu->has_slice_pg) {
+		u32 mask, val = slices;
+
+		if (INTEL_GEN(i915) >= 11) {
+			mask = GEN11_RPCS_S_CNT_MASK;
+			val <<= GEN11_RPCS_S_CNT_SHIFT;
+		} else {
+			mask = GEN8_RPCS_S_CNT_MASK;
+			val <<= GEN8_RPCS_S_CNT_SHIFT;
+		}
+
+		GEM_BUG_ON(val & ~mask);
+		val &= mask;
+
+		rpcs |= GEN8_RPCS_ENABLE | GEN8_RPCS_S_CNT_ENABLE | val;
+	}
+
+	if (subslice_pg) {
+		u32 val = subslices;
+
+		val <<= GEN8_RPCS_SS_CNT_SHIFT;
+
+		GEM_BUG_ON(val & ~GEN8_RPCS_SS_CNT_MASK);
+		val &= GEN8_RPCS_SS_CNT_MASK;
+
+		rpcs |= GEN8_RPCS_ENABLE | GEN8_RPCS_SS_CNT_ENABLE | val;
+	}
+
+	if (sseu->has_eu_pg) {
+		u32 val;
+
+		val = ctx_sseu.min_eus_per_subslice << GEN8_RPCS_EU_MIN_SHIFT;
+		GEM_BUG_ON(val & ~GEN8_RPCS_EU_MIN_MASK);
+		val &= GEN8_RPCS_EU_MIN_MASK;
+
+		rpcs |= val;
+
+		val = ctx_sseu.max_eus_per_subslice << GEN8_RPCS_EU_MAX_SHIFT;
+		GEM_BUG_ON(val & ~GEN8_RPCS_EU_MAX_MASK);
+		val &= GEN8_RPCS_EU_MAX_MASK;
+
+		rpcs |= val;
+
+		rpcs |= GEN8_RPCS_ENABLE;
+	}
+
+	return rpcs;
+}
diff --git a/drivers/gpu/drm/i915/intel_sseu.h b/drivers/gpu/drm/i915/intel_sseu.h
new file mode 100644
index 000000000000..bf6fa019fd00
--- /dev/null
+++ b/drivers/gpu/drm/i915/intel_sseu.h
@@ -0,0 +1,67 @@
+/*
+ * SPDX-License-Identifier: MIT
+ *
+ * Copyright © 2019 Intel Corporation
+ */
+
+#ifndef __INTEL_SSEU_H__
+#define __INTEL_SSEU_H__
+
+#include <linux/types.h>
+
+struct drm_i915_private;
+
+#define GEN_MAX_SLICES		(6) /* CNL upper bound */
+#define GEN_MAX_SUBSLICES	(8) /* ICL upper bound */
+
+struct sseu_dev_info {
+	u8 slice_mask;
+	u8 subslice_mask[GEN_MAX_SLICES];
+	u16 eu_total;
+	u8 eu_per_subslice;
+	u8 min_eu_in_pool;
+	/* For each slice, which subslice(s) has(have) 7 EUs (bitfield)? */
+	u8 subslice_7eu[3];
+	u8 has_slice_pg:1;
+	u8 has_subslice_pg:1;
+	u8 has_eu_pg:1;
+
+	/* Topology fields */
+	u8 max_slices;
+	u8 max_subslices;
+	u8 max_eus_per_subslice;
+
+	/* We don't have more than 8 eus per subslice at the moment and as we
+	 * store eus enabled using bits, no need to multiply by eus per
+	 * subslice.
+	 */
+	u8 eu_mask[GEN_MAX_SLICES * GEN_MAX_SUBSLICES];
+};
+
+/*
+ * Powergating configuration for a particular (context,engine).
+ */
+struct intel_sseu {
+	u8 slice_mask;
+	u8 subslice_mask;
+	u8 min_eus_per_subslice;
+	u8 max_eus_per_subslice;
+};
+
+static inline struct intel_sseu
+intel_device_default_sseu(const struct sseu_dev_info *sseu)
+{
+	struct intel_sseu value = {
+		.slice_mask = sseu->slice_mask,
+		.subslice_mask = sseu->subslice_mask[0],
+		.min_eus_per_subslice = sseu->max_eus_per_subslice,
+		.max_eus_per_subslice = sseu->max_eus_per_subslice,
+	};
+
+	return value;
+}
+
+u32 intel_sseu_make_rpcs(struct drm_i915_private *i915,
+			 const struct intel_sseu *req_sseu);
+
+#endif /* __INTEL_SSEU_H__ */
diff --git a/drivers/gpu/drm/i915/selftests/i915_gem_context.c b/drivers/gpu/drm/i915/selftests/i915_gem_context.c
index 4e1b6efc6b22..e1cb22f03e8e 100644
--- a/drivers/gpu/drm/i915/selftests/i915_gem_context.c
+++ b/drivers/gpu/drm/i915/selftests/i915_gem_context.c
@@ -962,8 +962,7 @@ __sseu_finish(struct drm_i915_private *i915,
 	      unsigned int expected,
 	      struct igt_spinner *spin)
 {
-	unsigned int slices =
-		hweight32(intel_device_default_sseu(i915).slice_mask);
+	unsigned int slices = hweight32(engine->sseu.slice_mask);
 	u32 rpcs = 0;
 	int ret = 0;
 
@@ -1047,8 +1046,8 @@ __igt_ctx_sseu(struct drm_i915_private *i915,
 	       const char *name,
 	       unsigned int flags)
 {
-	struct intel_sseu default_sseu = intel_device_default_sseu(i915);
 	struct intel_engine_cs *engine = i915->engine[RCS0];
+	struct intel_sseu default_sseu = engine->sseu;
 	struct drm_i915_gem_object *obj;
 	struct i915_gem_context *ctx;
 	struct intel_sseu pg_sseu;
-- 
2.20.1



More information about the Intel-gfx-trybot mailing list