[PATCH 08/11] drm/i915/display: Always enables MST master pipe first

José Roberto de Souza jose.souza at intel.com
Mon Dec 16 20:00:58 UTC 2019


Due to DDB overlaps the pipe enabling sequence is not always crescent.
As the previous patch selects the smallest pipe/transcoder in the MST
stream to be master and it needs to be enabled first this changes
were needed to guarantee that.

So first lets enable all pipes that did not needed a fullmodeset so
it don't have any external dependency, this ones can overlap with
each other ddb allocations.

Then on the second loop it will enable all the pipes that needs a
modeset and don't depends on other pipes like MST master
pipe/transcoder.

Then finally all the pipes that needs a modeset and have dependency
on other pipes.

v3: rebased

Cc: Ville Syrjälä <ville.syrjala at linux.intel.com>
Cc: Maarten Lankhorst <maarten.lankhorst at linux.intel.com>
Cc: Matt Roper <matthew.d.roper at intel.com>
Cc: Manasi Navare <manasi.d.navare at intel.com>
Signed-off-by: José Roberto de Souza <jose.souza at intel.com>
---
 drivers/gpu/drm/i915/display/intel_display.c | 88 +++++++++++++++-----
 1 file changed, 65 insertions(+), 23 deletions(-)

diff --git a/drivers/gpu/drm/i915/display/intel_display.c b/drivers/gpu/drm/i915/display/intel_display.c
index e976f82a0db7..176e31de68e7 100644
--- a/drivers/gpu/drm/i915/display/intel_display.c
+++ b/drivers/gpu/drm/i915/display/intel_display.c
@@ -14553,15 +14553,20 @@ static void skl_commit_modeset_enables(struct intel_atomic_state *state)
 	u8 hw_enabled_slices = dev_priv->wm.skl_hw.ddb.enabled_slices;
 	u8 required_slices = state->wm_results.ddb.enabled_slices;
 	struct skl_ddb_entry entries[I915_MAX_PIPES] = {};
-	u8 dirty_pipes = 0;
+	u8 update_pipes = 0, modeset_pipes = 0;
 	int i;
 
 	for_each_oldnew_intel_crtc_in_state(state, crtc, old_crtc_state, new_crtc_state, i) {
+		if (!new_crtc_state->hw.active)
+			continue;
+
 		/* ignore allocations for crtc's that have been turned off. */
-		if (!needs_modeset(new_crtc_state) && new_crtc_state->hw.active)
+		if (!needs_modeset(new_crtc_state)) {
 			entries[i] = old_crtc_state->wm.skl.ddb;
-		if (new_crtc_state->hw.active)
-			dirty_pipes |= BIT(crtc->pipe);
+			update_pipes |= BIT(crtc->pipe);
+		} else {
+			modeset_pipes |= BIT(modeset_pipes);
+		}
 	}
 
 	/* If 2nd DBuf slice required, enable it here */
@@ -14571,16 +14576,18 @@ static void skl_commit_modeset_enables(struct intel_atomic_state *state)
 	/*
 	 * Whenever the number of active pipes changes, we need to make sure we
 	 * update the pipes in the right order so that their ddb allocations
-	 * never overlap with eachother inbetween CRTC updates. Otherwise we'll
+	 * never overlap with each other between CRTC updates. Otherwise we'll
 	 * cause pipe underruns and other bad stuff.
+	 *
+	 * So first lets enable all pipes that did not needed a fullmodeset so
+	 * it don't have any external dependency
 	 */
-	while (dirty_pipes) {
+	while (update_pipes) {
 		for_each_oldnew_intel_crtc_in_state(state, crtc, old_crtc_state,
 						    new_crtc_state, i) {
 			enum pipe pipe = crtc->pipe;
-			bool modeset = needs_modeset(new_crtc_state);
 
-			if ((dirty_pipes & BIT(pipe)) == 0)
+			if ((update_pipes & BIT(pipe)) == 0)
 				continue;
 
 			if (skl_ddb_allocation_overlaps(&new_crtc_state->wm.skl.ddb,
@@ -14589,20 +14596,10 @@ static void skl_commit_modeset_enables(struct intel_atomic_state *state)
 				continue;
 
 			entries[i] = new_crtc_state->wm.skl.ddb;
-			dirty_pipes &= ~BIT(pipe);
-
-			if (modeset && is_trans_port_sync_mode(new_crtc_state)) {
-				if (is_trans_port_sync_master(new_crtc_state))
-					intel_update_trans_port_sync_crtcs(crtc,
-									   state,
-									   old_crtc_state,
-									   new_crtc_state);
-				else
-					continue;
-			} else {
-				intel_update_crtc(crtc, state, old_crtc_state,
-						  new_crtc_state);
-			}
+			update_pipes &= ~BIT(pipe);
+
+			intel_update_crtc(crtc, state, old_crtc_state,
+					  new_crtc_state);
 
 			/*
 			 * If this is an already active pipe, it's DDB changed,
@@ -14612,11 +14609,56 @@ static void skl_commit_modeset_enables(struct intel_atomic_state *state)
 			 */
 			if (!skl_ddb_entry_equal(&new_crtc_state->wm.skl.ddb,
 						 &old_crtc_state->wm.skl.ddb) &&
-			    !modeset && dirty_pipes)
+			    update_pipes)
 				intel_wait_for_vblank(dev_priv, pipe);
+
 		}
 	}
 
+	/*
+	 * Enabling all pipes that needs a modeset and do not depends on other
+	 * pipes
+	 */
+	for_each_oldnew_intel_crtc_in_state(state, crtc, old_crtc_state,
+					    new_crtc_state, i) {
+		enum pipe pipe = crtc->pipe;
+
+		if ((modeset_pipes & BIT(pipe)) == 0)
+			continue;
+
+		if (intel_dp_mst_is_slave_trans(new_crtc_state) ||
+		    is_trans_port_sync_slave(new_crtc_state))
+			continue;
+
+		modeset_pipes &= ~BIT(pipe);
+
+		if (is_trans_port_sync_mode(new_crtc_state))
+			intel_update_trans_port_sync_crtcs(crtc, state,
+							   old_crtc_state,
+							   new_crtc_state);
+		else
+			intel_update_crtc(crtc, state, old_crtc_state,
+					  new_crtc_state);
+	}
+
+	/*
+	 * Finally enable all pipes that needs a modeset and depends on
+	 * other pipes, right now it is only MST slaves as both port sync slave
+	 * and master are enabled together
+	 */
+	for_each_oldnew_intel_crtc_in_state(state, crtc, old_crtc_state,
+					    new_crtc_state, i) {
+		enum pipe pipe = crtc->pipe;
+
+		if ((modeset_pipes & BIT(pipe)) == 0)
+			continue;
+
+		if (is_trans_port_sync_slave(new_crtc_state))
+			continue;
+
+		intel_update_crtc(crtc, state, old_crtc_state, new_crtc_state);
+	}
+
 	/* If 2nd DBuf slice is no more required disable it */
 	if (INTEL_GEN(dev_priv) >= 11 && required_slices < hw_enabled_slices)
 		icl_dbuf_slices_update(dev_priv, required_slices);
-- 
2.24.1



More information about the Intel-gfx-trybot mailing list