[PATCH 3/7] drm/i915: Fix and improve MCR selection logic
Tvrtko Ursulin
tvrtko.ursulin at linux.intel.com
Thu Jul 18 17:44:34 UTC 2019
From: Tvrtko Ursulin <tvrtko.ursulin at intel.com>
A couple issues were present in this code:
1.
fls() usage was incorrect causing off by one in subslice mask lookup,
which in other words means subslice mask of all zeroes is always used
(subslice mask of a slice which is not present, or even out of bounds
array access), rendering the checks in wa_init_mcr either futile or
random.
2.
Condition in WARN_ON was not correct. It is doing a bitwise and operation
between a positive (present subslices) and negative mask (disabled L3
banks).
This means that with corrected fls() usage the assert would always
incorrectly fail.
We could fix this by inverting the fuse bits in the check, but instead do
one better and improve the code so it not only asserts, but finds the
first common index between the two masks and only warns if no such index
can be found.
v2:
* Simplify check for logic and redability.
* Improve commentary explaining what is really happening ie. what the
assert is really trying to check and why.
v3:
* Find first common index instead of just asserting.
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin at intel.com>
Fixes: fe864b76c2ab ("drm/i915: Implement WaProgramMgsrForL3BankSpecificMmioReads")
Reviewed-by: Chris Wilson <chris at chris-wilson.co.uk> # v1
Cc: Michał Winiarski <michal.winiarski at intel.com>
Cc: Stuart Summers <stuart.summers at intel.com>
---
drivers/gpu/drm/i915/gt/intel_engine_cs.c | 24 ------
drivers/gpu/drm/i915/gt/intel_workarounds.c | 90 +++++++++++----------
drivers/gpu/drm/i915/i915_drv.h | 2 -
3 files changed, 49 insertions(+), 67 deletions(-)
diff --git a/drivers/gpu/drm/i915/gt/intel_engine_cs.c b/drivers/gpu/drm/i915/gt/intel_engine_cs.c
index cc4d1826173d..65cbf1d9118d 100644
--- a/drivers/gpu/drm/i915/gt/intel_engine_cs.c
+++ b/drivers/gpu/drm/i915/gt/intel_engine_cs.c
@@ -959,30 +959,6 @@ const char *i915_cache_level_str(struct drm_i915_private *i915, int type)
}
}
-u32 intel_calculate_mcr_s_ss_select(struct drm_i915_private *dev_priv)
-{
- const struct sseu_dev_info *sseu = &RUNTIME_INFO(dev_priv)->sseu;
- unsigned int slice = fls(sseu->slice_mask) - 1;
- unsigned int subslice;
- u32 mcr_s_ss_select;
-
- GEM_BUG_ON(slice >= ARRAY_SIZE(sseu->subslice_mask));
- subslice = fls(sseu->subslice_mask[slice]);
- GEM_BUG_ON(!subslice);
- subslice--;
-
- if (IS_GEN(dev_priv, 10))
- mcr_s_ss_select = GEN8_MCR_SLICE(slice) |
- GEN8_MCR_SUBSLICE(subslice);
- else if (INTEL_GEN(dev_priv) >= 11)
- mcr_s_ss_select = GEN11_MCR_SLICE(slice) |
- GEN11_MCR_SUBSLICE(subslice);
- else
- mcr_s_ss_select = 0;
-
- return mcr_s_ss_select;
-}
-
static u32
read_subslice_reg(struct intel_engine_cs *engine, int slice, int subslice,
i915_reg_t reg)
diff --git a/drivers/gpu/drm/i915/gt/intel_workarounds.c b/drivers/gpu/drm/i915/gt/intel_workarounds.c
index 3b1fc7c8faa8..c2325b7ecf8d 100644
--- a/drivers/gpu/drm/i915/gt/intel_workarounds.c
+++ b/drivers/gpu/drm/i915/gt/intel_workarounds.c
@@ -762,7 +762,10 @@ static void
wa_init_mcr(struct drm_i915_private *i915, struct i915_wa_list *wal)
{
const struct sseu_dev_info *sseu = &RUNTIME_INFO(i915)->sseu;
- u32 mcr_slice_subslice_mask;
+ unsigned int slice, subslice;
+ u32 l3_en, mcr, mcr_mask;
+
+ GEM_BUG_ON(INTEL_GEN(i915) < 10);
/*
* WaProgramMgsrForL3BankSpecificMmioReads: cnl,icl
@@ -770,42 +773,7 @@ wa_init_mcr(struct drm_i915_private *i915, struct i915_wa_list *wal)
* the case, we might need to program MCR select to a valid L3Bank
* by default, to make sure we correctly read certain registers
* later on (in the range 0xB100 - 0xB3FF).
- * This might be incompatible with
- * WaProgramMgsrForCorrectSliceSpecificMmioReads.
- * Fortunately, this should not happen in production hardware, so
- * we only assert that this is the case (instead of implementing
- * something more complex that requires checking the range of every
- * MMIO read).
- */
- if (INTEL_GEN(i915) >= 10 &&
- is_power_of_2(sseu->slice_mask)) {
- /*
- * read FUSE3 for enabled L3 Bank IDs, if L3 Bank matches
- * enabled subslice, no need to redirect MCR packet
- */
- u32 slice = fls(sseu->slice_mask);
- u32 fuse3 =
- intel_uncore_read(&i915->uncore, GEN10_MIRROR_FUSE3);
- u8 ss_mask = sseu->subslice_mask[slice];
-
- u8 enabled_mask = (ss_mask | ss_mask >>
- GEN10_L3BANK_PAIR_COUNT) & GEN10_L3BANK_MASK;
- u8 disabled_mask = fuse3 & GEN10_L3BANK_MASK;
-
- /*
- * Production silicon should have matched L3Bank and
- * subslice enabled
- */
- WARN_ON((enabled_mask & disabled_mask) != enabled_mask);
- }
-
- if (INTEL_GEN(i915) >= 11)
- mcr_slice_subslice_mask = GEN11_MCR_SLICE_MASK |
- GEN11_MCR_SUBSLICE_MASK;
- else
- mcr_slice_subslice_mask = GEN8_MCR_SLICE_MASK |
- GEN8_MCR_SUBSLICE_MASK;
- /*
+ *
* WaProgramMgsrForCorrectSliceSpecificMmioReads:cnl,icl
* Before any MMIO read into slice/subslice specific registers, MCR
* packet control register needs to be programmed to point to any
@@ -815,11 +783,51 @@ wa_init_mcr(struct drm_i915_private *i915, struct i915_wa_list *wal)
* are consistent across s/ss in almost all cases. In the rare
* occasions, such as INSTDONE, where this value is dependent
* on s/ss combo, the read should be done with read_subslice_reg.
+ *
+ * Since GEN8_MCR_SELECTOR contains dual-purpose bits which select both
+ * to which subslice, or to which L3 bank, the respective mmio reads
+ * will go, we have to find a common index which works for both
+ * accesses.
+ *
+ * Case where we cannot find a common index fortunately should not
+ * happen in production hardware, so we only emit a warning instead of
+ * implementing something more complex that requires checking the range
+ * of every MMIO read.
*/
- wa_write_masked_or(wal,
- GEN8_MCR_SELECTOR,
- mcr_slice_subslice_mask,
- intel_calculate_mcr_s_ss_select(i915));
+
+ if (INTEL_GEN(i915) >= 10 && is_power_of_2(sseu->slice_mask)) {
+ u32 l3_fuse =
+ intel_uncore_read(&i915->uncore, GEN10_MIRROR_FUSE3) &
+ GEN10_L3BANK_MASK;
+
+ DRM_DEBUG_DRIVER("L3 fuse = %x\n", l3_fuse);
+ l3_en = ~(l3_fuse << GEN10_L3BANK_PAIR_COUNT | l3_fuse);
+ } else {
+ l3_en = ~0;
+ }
+
+ slice = fls(sseu->slice_mask) - 1;
+ GEM_BUG_ON(slice >= ARRAY_SIZE(sseu->subslice_mask));
+ subslice = fls(l3_en & sseu->subslice_mask[slice]);
+ if (!subslice) {
+ DRM_WARN("No common index found between subslice mask %x and L3 bank mask %x!\n",
+ sseu->subslice_mask[slice], l3_en);
+ subslice = fls(l3_en);
+ WARN_ON(!subslice);
+ }
+ subslice--;
+
+ if (INTEL_GEN(i915) >= 11) {
+ mcr = GEN11_MCR_SLICE(slice) | GEN11_MCR_SUBSLICE(subslice);
+ mcr_mask = GEN11_MCR_SLICE_MASK | GEN11_MCR_SUBSLICE_MASK;
+ } else {
+ mcr = GEN8_MCR_SLICE(slice) | GEN8_MCR_SUBSLICE(subslice);
+ mcr_mask = GEN8_MCR_SLICE_MASK | GEN8_MCR_SUBSLICE_MASK;
+ }
+
+ DRM_DEBUG_DRIVER("MCR slice/subslice = %x\n", mcr);
+
+ wa_write_masked_or(wal, GEN8_MCR_SELECTOR, mcr_mask, mcr);
}
static void
diff --git a/drivers/gpu/drm/i915/i915_drv.h b/drivers/gpu/drm/i915/i915_drv.h
index 78c1ed6e17b2..0e44cc4b2ca1 100644
--- a/drivers/gpu/drm/i915/i915_drv.h
+++ b/drivers/gpu/drm/i915/i915_drv.h
@@ -2389,8 +2389,6 @@ void i915_driver_remove(struct drm_device *dev);
void intel_engine_init_hangcheck(struct intel_engine_cs *engine);
int vlv_force_gfx_clock(struct drm_i915_private *dev_priv, bool on);
-u32 intel_calculate_mcr_s_ss_select(struct drm_i915_private *dev_priv);
-
static inline bool intel_gvt_active(struct drm_i915_private *dev_priv)
{
return dev_priv->gvt;
--
2.20.1
More information about the Intel-gfx-trybot
mailing list