[PATCH 3/6] drm/i915/psr: Make all PSR register relative to mmio base

[José Roberto de Souza]

Right now it have a mix of PSR registers that are relative to PSR
mmio base and other register with a hardcoded address, lets keep it
consistented and have it all relative to mmio base.

Cc: Dhinakaran Pandiyan <dhinakaran.pandiyan at intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi at intel.com>
Signed-off-by: José Roberto de Souza <jose.souza at intel.com>
---
 drivers/gpu/drm/i915/i915_reg.h | 11 ++++-------
 1 file changed, 4 insertions(+), 7 deletions(-)

diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h
index 08538951a556..419f013403b1 100644
--- a/drivers/gpu/drm/i915/i915_reg.h
+++ b/drivers/gpu/drm/i915/i915_reg.h
@@ -4326,7 +4326,7 @@ enum {
 #define   EDP_PSR_DEBUG_MASK_DISP_REG_WRITE    (1 << 16) /* Reserved in ICL+ */
 #define   EDP_PSR_DEBUG_EXIT_ON_PIXEL_UNDERRUN (1 << 15) /* SKL+ */
 
-#define EDP_PSR2_CTL			_MMIO(0x6f900)
+#define EDP_PSR2_CTL			_MMIO(dev_priv->psr.mmio_base + 0x100)
 #define   EDP_PSR2_ENABLE		(1 << 31)
 #define   EDP_SU_TRACK_ENABLE		(1 << 30)
 #define   EDP_Y_COORDINATE_VALID	(1 << 26) /* GLK and CNL+ */
@@ -4344,7 +4344,7 @@ enum {
 #define   EDP_PSR2_IDLE_FRAME_MASK	0xf
 #define   EDP_PSR2_IDLE_FRAME_SHIFT	0
 
-#define PSR_EVENT				_MMIO(0x6F848)
+#define PSR_EVENT				_MMIO(dev_priv->psr.mmio_base + 0x48)
 #define  PSR_EVENT_PSR2_WD_TIMER_EXPIRE		(1 << 17)
 #define  PSR_EVENT_PSR2_DISABLED		(1 << 16)
 #define  PSR_EVENT_SU_DIRTY_FIFO_UNDERRUN	(1 << 15)
@@ -4362,14 +4362,11 @@ enum {
 #define  PSR_EVENT_LPSP_MODE_EXIT		(1 << 1)
 #define  PSR_EVENT_PSR_DISABLE			(1 << 0)
 
-#define EDP_PSR2_STATUS			_MMIO(0x6f940)
+#define EDP_PSR2_STATUS			_MMIO(dev_priv->psr.mmio_base + 0x140)
 #define EDP_PSR2_STATUS_STATE_MASK     (0xf << 28)
 #define EDP_PSR2_STATUS_STATE_SHIFT    28
 
-#define _PSR2_SU_STATUS_0		0x6F914
-#define _PSR2_SU_STATUS_1		0x6F918
-#define _PSR2_SU_STATUS_2		0x6F91C
-#define _PSR2_SU_STATUS(index)		_MMIO(_PICK_EVEN((index), _PSR2_SU_STATUS_0, _PSR2_SU_STATUS_1))
+#define _PSR2_SU_STATUS(index)		_MMIO(dev_priv->psr.mmio_base + 0x114 + (index) * 4)
 #define PSR2_SU_STATUS(frame)		(_PSR2_SU_STATUS((frame) / 3))
 #define PSR2_SU_STATUS_SHIFT(frame)	(((frame) % 3) * 10)
 #define PSR2_SU_STATUS_MASK(frame)	(0x3ff << PSR2_SU_STATUS_SHIFT(frame))
-- 
2.21.0