[PATCH 19/24] drm/i915: Make hardware readout work on i915.

[Maarten Lankhorst]

Unfortunately I have no way to test this, but it should be correct
if the bios sets up bigjoiner in a sane way.

Skip iterating over bigjoiner slaves, only the master has the state we
care about.

Add the width of the bigjoiner slave to the reconstructed fb.

Hide the bigjoiner slave to userspace, and double the mode on bigjoiner
master.

And last, disable bigjoiner slave from primary if reconstruction fails.

Signed-off-by: Maarten Lankhorst <maarten.lankhorst at linux.intel.com>
---
 drivers/gpu/drm/i915/display/intel_display.c | 65 +++++++++++++++++++-
 1 file changed, 62 insertions(+), 3 deletions(-)

diff --git a/drivers/gpu/drm/i915/display/intel_display.c b/drivers/gpu/drm/i915/display/intel_display.c
index e525745c4dbe..f1ab8fc219d6 100644
--- a/drivers/gpu/drm/i915/display/intel_display.c
+++ b/drivers/gpu/drm/i915/display/intel_display.c
@@ -3180,6 +3180,8 @@ intel_find_initial_plane_obj(struct intel_crtc *intel_crtc,
 	struct intel_plane *intel_plane = to_intel_plane(primary);
 	struct intel_plane_state *intel_state =
 		to_intel_plane_state(plane_state);
+	struct intel_crtc_state *crtc_state =
+		to_intel_crtc_state(intel_crtc->base.state);
 	struct drm_framebuffer *fb;
 
 	if (!plane_config->fb)
@@ -3202,7 +3204,7 @@ intel_find_initial_plane_obj(struct intel_crtc *intel_crtc,
 		if (c == &intel_crtc->base)
 			continue;
 
-		if (!to_intel_crtc(c)->active)
+		if (!to_intel_crtc_state(c->state)->uapi.active)
 			continue;
 
 		state = to_intel_plane_state(c->primary->state);
@@ -3224,6 +3226,12 @@ intel_find_initial_plane_obj(struct intel_crtc *intel_crtc,
 	 * pretend the BIOS never had it enabled.
 	 */
 	intel_plane_disable_noatomic(intel_crtc, intel_plane);
+	if (crtc_state->bigjoiner) {
+		struct intel_crtc *slave =
+			crtc_state->bigjoiner_linked_crtc;
+
+		intel_plane_disable_noatomic(slave, to_intel_plane(slave->base.primary));
+	}
 
 	return;
 
@@ -9964,6 +9972,7 @@ static void
 skylake_get_initial_plane_config(struct intel_crtc *crtc,
 				 struct intel_initial_plane_config *plane_config)
 {
+	struct intel_crtc_state *crtc_state = to_intel_crtc_state(crtc->base.state);
 	struct drm_device *dev = crtc->base.dev;
 	struct drm_i915_private *dev_priv = to_i915(dev);
 	struct intel_plane *plane = to_intel_plane(crtc->base.primary);
@@ -10067,6 +10076,18 @@ skylake_get_initial_plane_config(struct intel_crtc *crtc,
 	fb->height = ((val >> 16) & 0xffff) + 1;
 	fb->width = ((val >> 0) & 0xffff) + 1;
 
+	/* add bigjoiner slave as well, if the fb stretches both */
+	if (crtc_state->bigjoiner) {
+		enum pipe bigjoiner_pipe = crtc_state->bigjoiner_linked_crtc->pipe;
+
+		if (fb->width == crtc_state->pipe_src_w &&
+		    (I915_READ(PLANE_SURF(bigjoiner_pipe, plane_id)) & 0xfffff000) == plane_config->base) {
+			val = I915_READ(PLANE_SIZE(crtc_state->bigjoiner_linked_crtc->pipe, plane_id));
+			fb->height += ((val >> 16) & 0xfff) + 1;
+			fb->width += ((val >> 0) & 0x1fff) + 1;
+		}
+	}
+
 	val = I915_READ(PLANE_STRIDE(pipe, plane_id));
 	stride_mult = skl_plane_stride_mult(fb, 0, DRM_MODE_ROTATE_0);
 	fb->pitches[0] = (val & 0x3ff) * stride_mult;
@@ -17282,7 +17303,8 @@ static void intel_sanitize_crtc(struct intel_crtc *crtc,
 
 	/* Adjust the state of the output pipe according to whether we
 	 * have active connectors/encoders. */
-	if (crtc_state->hw.active && !intel_crtc_has_encoders(crtc))
+	if (crtc_state->hw.active && !intel_crtc_has_encoders(crtc) &&
+	    !crtc_state->bigjoiner_slave)
 		intel_crtc_disable_noatomic(&crtc->base, ctx);
 
 	if (crtc_state->hw.active || HAS_GMCH(dev_priv)) {
@@ -17572,6 +17594,9 @@ static void intel_modeset_readout_hw_state(struct drm_device *dev)
 		struct intel_plane *plane;
 		int min_cdclk = 0;
 
+		if (crtc_state->bigjoiner_slave)
+			continue;
+
 		memset(&crtc->base.mode, 0, sizeof(crtc->base.mode));
 		if (crtc_state->hw.active) {
 			intel_mode_from_pipe_config(&crtc->base.mode, crtc_state);
@@ -17579,7 +17604,8 @@ static void intel_modeset_readout_hw_state(struct drm_device *dev)
 			crtc->base.mode.vdisplay = crtc_state->pipe_src_h;
 			intel_mode_from_pipe_config(&crtc_state->hw.adjusted_mode,
 						    crtc_state);
-			WARN_ON(drm_atomic_set_mode_for_crtc(&crtc_state->uapi, &crtc->base.mode));
+			if (!crtc_state->bigjoiner_slave)
+				WARN_ON(drm_atomic_set_mode_for_crtc(&crtc_state->uapi, &crtc->base.mode));
 
 			/*
 			 * The initial mode needs to be set in order to keep
@@ -17622,6 +17648,39 @@ static void intel_modeset_readout_hw_state(struct drm_device *dev)
 		intel_bw_crtc_update(bw_state, crtc_state);
 		copy_hw_to_uapi_state(crtc_state);
 		intel_pipe_config_sanity_check(dev_priv, crtc_state);
+
+		/* discard our incomplete slave state, copy it from master */
+		if (crtc_state->bigjoiner && crtc_state->hw.active) {
+			struct intel_crtc *slave = crtc_state->bigjoiner_linked_crtc;
+			struct intel_crtc_state *slave_crtc_state =
+				to_intel_crtc_state(slave->base.state);
+
+			copy_bigjoiner_crtc_state(slave_crtc_state, crtc_state);
+			slave->base.mode = crtc->base.mode;
+
+			dev_priv->min_cdclk[slave->pipe] = min_cdclk;
+			dev_priv->min_voltage_level[slave->pipe] =
+				crtc_state->min_voltage_level;
+
+			for_each_intel_plane_on_crtc(&dev_priv->drm, slave, plane) {
+				const struct intel_plane_state *plane_state =
+					to_intel_plane_state(plane->base.state);
+
+				/*
+				* FIXME don't have the fb yet, so can't
+				* use intel_plane_data_rate() :(
+				*/
+				if (plane_state->uapi.visible)
+					crtc_state->data_rate[plane->id] =
+						4 * crtc_state->pixel_rate;
+				else
+					crtc_state->data_rate[plane->id] = 0;
+			}
+
+			intel_bw_crtc_update(bw_state, slave_crtc_state);
+			drm_calc_timestamping_constants(&slave->base,
+							&slave_crtc_state->hw.adjusted_mode);
+		}
 	}
 }
 
-- 
2.23.0