[PATCH v20 5/9] drm/i915: Added required new PCode commands

[Stanislav Lisovskiy]

We need a new PCode request commands and reply codes
to be added as a prepartion patch for QGV points
restricting for new SAGV support.

v2: - Extracted those changes into separate patch
      (Ville Syrjälä)

Signed-off-by: Stanislav Lisovskiy <stanislav.lisovskiy at intel.com>
---
 drivers/gpu/drm/i915/i915_reg.h       | 4 ++++
 drivers/gpu/drm/i915/intel_sideband.c | 2 ++
 2 files changed, 6 insertions(+)

diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h
index 79ae9654dac9..30dfd9a6d519 100644
--- a/drivers/gpu/drm/i915/i915_reg.h
+++ b/drivers/gpu/drm/i915/i915_reg.h
@@ -8991,6 +8991,7 @@ enum {
 #define     GEN7_PCODE_ILLEGAL_DATA		0x3
 #define     GEN11_PCODE_ILLEGAL_SUBCOMMAND	0x4
 #define     GEN11_PCODE_LOCKED			0x6
+#define     GEN11_PCODE_REJECTED		0x11
 #define     GEN7_PCODE_MIN_FREQ_TABLE_GT_RATIO_OUT_OF_RANGE 0x10
 #define   GEN6_PCODE_WRITE_RC6VIDS		0x4
 #define   GEN6_PCODE_READ_RC6VIDS		0x5
@@ -9012,6 +9013,7 @@ enum {
 #define   ICL_PCODE_MEM_SUBSYSYSTEM_INFO	0xd
 #define     ICL_PCODE_MEM_SS_READ_GLOBAL_INFO	(0x0 << 8)
 #define     ICL_PCODE_MEM_SS_READ_QGV_POINT_INFO(point)	(((point) << 16) | (0x1 << 8))
+#define   ICL_PCODE_SAGV_DE_MEM_SS_CONFIG	0xe
 #define   GEN6_PCODE_READ_D_COMP		0x10
 #define   GEN6_PCODE_WRITE_D_COMP		0x11
 #define   HSW_PCODE_DE_WRITE_FREQ_REQ		0x17
@@ -9024,6 +9026,8 @@ enum {
 #define     GEN9_SAGV_IS_DISABLED		0x1
 #define     GEN9_SAGV_ENABLE			0x3
 #define GEN12_PCODE_READ_SAGV_BLOCK_TIME_US	0x23
+#define GEN11_PCODE_POINTS_RESTRICTED		0x0
+#define GEN11_PCODE_POINTS_RESTRICTED_MASK	0x1
 #define GEN6_PCODE_DATA				_MMIO(0x138128)
 #define   GEN6_PCODE_FREQ_IA_RATIO_SHIFT	8
 #define   GEN6_PCODE_FREQ_RING_RATIO_SHIFT	16
diff --git a/drivers/gpu/drm/i915/intel_sideband.c b/drivers/gpu/drm/i915/intel_sideband.c
index 1447e7516cb7..1e7dd6b6f103 100644
--- a/drivers/gpu/drm/i915/intel_sideband.c
+++ b/drivers/gpu/drm/i915/intel_sideband.c
@@ -370,6 +370,8 @@ static inline int gen7_check_mailbox_status(u32 mbox)
 		return -ENXIO;
 	case GEN11_PCODE_LOCKED:
 		return -EBUSY;
+	case GEN11_PCODE_REJECTED:
+		return -EACCES;
 	case GEN7_PCODE_MIN_FREQ_TABLE_GT_RATIO_OUT_OF_RANGE:
 		return -EOVERFLOW;
 	default:
-- 
2.24.1.485.gad05a3d8e5