[PATCH i-g-t 1/5] tests/kms_dp_dsc: Add a subtest to force DSC output BPP
Patnana Venkata Sai
venkata.sai.patnana at intel.com
Wed Jul 7 07:40:33 UTC 2021
This subtest uses the accepted DSC BPPs and tries to
force a modeset by setting a certain BPP as the output
BPP for a connector.
Signed-off-by: Anusha Srivatsa <anusha.srivatsa at intel.com>
Signed-off-by: Karthik B S <karthik.b.s at intel.com>
Cc: Karthik B S <karthik.b.s at intel.com>
Cc: Vandita Kulkarni <vandita.kulkarni at intel.com>
Cc: Navare Manasi D <manasi.d.navare at intel.com>
Signed-off-by: Petri Latvala <petri.latvala at intel.com>
Signed-off-by: Patnana Venkata Sai <venkata.sai.patnana at intel.com>
Reviewed-by: Manasi Navare <manasi.d.navare at intel.com>
Signed-off-by: Patnana Venkata Sai <venkata.sai.patnana at intel.com>
---
tests/kms_dp_dsc.c | 181 ++++++++++++++++++++++++++++-----------------
1 file changed, 113 insertions(+), 68 deletions(-)
diff --git a/tests/kms_dp_dsc.c b/tests/kms_dp_dsc.c
index 3fb9852e9e..2bf1d5bb7e 100644
--- a/tests/kms_dp_dsc.c
+++ b/tests/kms_dp_dsc.c
@@ -44,15 +44,19 @@
#include <fcntl.h>
#include <termios.h>
+/* currently dsc compression is verifying on 8bpc frame only */
+#define DRM_FORMAT_BPC 8
+
enum dsc_test_type
{
- test_basic_dsc_enable
+ test_basic_dsc_enable,
+ test_dsc_compression_bpp
};
typedef struct {
int drm_fd;
int debugfs_fd;
- uint32_t id;
+ uint32_t devid;
igt_display_t display;
struct igt_fb fb_test_pattern;
igt_output_t *output;
@@ -61,6 +65,7 @@ typedef struct {
drmModeConnector *connector;
drmModeEncoder *encoder;
int crtc;
+ int compression_bpp;
enum pipe pipe;
char conn_name[128];
} data_t;
@@ -121,6 +126,22 @@ static void force_dp_dsc_enable(data_t *data)
igt_assert_f(ret > 0, "debugfs_write failed");
}
+static void force_dp_dsc_enable_bpp(data_t *data)
+{
+ int ret;
+ char file_name[128] = {0};
+ char buffer[20];
+
+ sprintf(buffer, "%d", data->compression_bpp);
+ strcpy(file_name, data->conn_name);
+ strcat(file_name, "/i915_dsc_bpp_support");
+ igt_debug("Forcing DSC BPP to %d on %s\n",
+ data->compression_bpp, data->conn_name);
+ ret = igt_sysfs_write(data->debugfs_fd, file_name,
+ buffer, sizeof(buffer));
+ igt_assert_f(ret > 0, "debugfs_write failed");
+}
+
static bool is_force_dsc_enabled(data_t *data)
{
char file_name[128] = {0};
@@ -174,6 +195,37 @@ static void kms_dp_dsc_exit_handler(int sig)
restore_force_dsc_en();
}
+static bool check_dsc_on_connector(data_t *data, uint32_t drmConnector)
+{
+ drmModeConnector *connector;
+ igt_output_t *output;
+
+ connector = drmModeGetConnectorCurrent(data->drm_fd,
+ drmConnector);
+ if (connector->connection != DRM_MODE_CONNECTED ||
+ ((connector->connector_type != DRM_MODE_CONNECTOR_eDP) &&
+ (connector->connector_type != DRM_MODE_CONNECTOR_DisplayPort)))
+ return false;
+
+ output = igt_output_from_connector(&data->display, connector);
+ sprintf(data->conn_name, "%s-%d",
+ kmstest_connector_type_str(connector->connector_type),
+ connector->connector_type_id);
+
+ if (!is_dp_dsc_supported(data)) {
+ igt_debug("DSC not supported on connector %s\n",
+ data->conn_name);
+ return false;
+ }
+ if (connector->connector_type == DRM_MODE_CONNECTOR_DisplayPort &&
+ !is_dp_fec_supported(data)) {
+ igt_debug("DSC cannot be enabled without FEC on %s\n",
+ data->conn_name);
+ return false;
+ }
+ data->output = output;
+ return true;
+}
/*
* Re-probe connectors and do a modeset with DSC
@@ -181,6 +233,7 @@ static void kms_dp_dsc_exit_handler(int sig)
*/
static void update_display(data_t *data, enum dsc_test_type test_type)
{
+ bool enabled;
igt_plane_t *primary;
data->connector = data->output->config.connector;
@@ -188,37 +241,35 @@ static void update_display(data_t *data, enum dsc_test_type test_type)
igt_output_set_pipe(data->output, PIPE_NONE);
igt_display_commit(&data->display);
- if (test_type == test_basic_dsc_enable) {
- bool enabled;
+ igt_debug("DSC is supported on %s\n", data->conn_name);
+ save_force_dsc_en(data);
+ force_dp_dsc_enable(data);
+ if (test_type == test_dsc_compression_bpp) {
+ igt_debug("Trying to set BPP to %d\n", data->compression_bpp);
+ force_dp_dsc_enable_bpp(data);
+ }
- igt_debug("DSC is supported on %s\n", data->conn_name);
- save_force_dsc_en(data);
- force_dp_dsc_enable(data);
+ igt_output_set_pipe(data->output, data->pipe);
+ primary = igt_output_get_plane_type(data->output,
+ DRM_PLANE_TYPE_PRIMARY);
- igt_output_set_pipe(data->output, data->pipe);
- primary = igt_output_get_plane_type(data->output,
- DRM_PLANE_TYPE_PRIMARY);
+ /* Now set the output to the desired mode */
+ igt_plane_set_fb(primary, &data->fb_test_pattern);
+ igt_display_commit(&data->display);
- /* Now set the output to the desired mode */
- igt_plane_set_fb(primary, &data->fb_test_pattern);
- igt_display_commit(&data->display);
+ /*
+ * Until we have CRC check support, manually check if RGB test
+ * pattern has no corruption.
+ */
+ manual("RGB test pattern without corruption");
- /*
- * Until we have CRC check support, manually check if RGB test
- * pattern has no corruption.
- */
- manual("RGB test pattern without corruption");
-
- enabled = is_dp_dsc_enabled(data);
- restore_force_dsc_en();
-
- igt_assert_f(enabled,
- "Default DSC enable failed on Connector: %s Pipe: %s\n",
- data->conn_name,
- kmstest_pipe_name(data->pipe));
- } else {
- igt_assert(!"Unknown test type\n");
- }
+ enabled = is_dp_dsc_enabled(data);
+ restore_force_dsc_en();
+
+ igt_assert_f(enabled,
+ "Default DSC enable failed on Connector: %s Pipe: %s\n",
+ data->conn_name,
+ kmstest_pipe_name(data->pipe));
}
static void run_test(data_t *data, igt_output_t *output,
@@ -244,12 +295,16 @@ static void run_test(data_t *data, igt_output_t *output,
}
}
- if (igt_pipe_connector_valid(pipe, output)) {
- data->pipe = pipe;
- data->output = output;
- update_display(data, test_type);
- test_cleanup(data);
- }
+ igt_dynamic_f("%s-pipe-%s", output->name, kmstest_pipe_name(pipe))
+ if (igt_pipe_connector_valid(pipe, output)) {
+ data->pipe = pipe;
+ data->output = output;
+ update_display(data, test_type);
+ test_cleanup(data);
+ }
+
+ if (test_type == test_dsc_compression_bpp)
+ break;
}
igt_remove_fb(data->drm_fd, &data->fb_test_pattern);
@@ -258,59 +313,49 @@ static void run_test(data_t *data, igt_output_t *output,
igt_main
{
data_t data = {};
- igt_output_t *output;
drmModeRes *res;
drmModeConnector *connector = NULL;
- int i, test_conn_cnt, test_cnt;
- int tests[] = {DRM_MODE_CONNECTOR_eDP, DRM_MODE_CONNECTOR_DisplayPort};
-
+ int i, j, test_conn_cnt;
igt_fixture {
data.drm_fd = drm_open_driver_master(DRIVER_ANY);
+ igt_require_intel(data.drm_fd);
+ data.devid = intel_get_drm_devid(data.drm_fd);
data.debugfs_fd = igt_debugfs_dir(data.drm_fd);
kmstest_set_vt_graphics_mode();
igt_install_exit_handler(kms_dp_dsc_exit_handler);
igt_display_require(&data.display, data.drm_fd);
igt_require(res = drmModeGetResources(data.drm_fd));
}
-
- for (test_cnt = 0; test_cnt < ARRAY_SIZE(tests); test_cnt++) {
- igt_describe("Validate display stream compression functionality if supported on "
- "DP/eDP connector");
- igt_subtest_f("basic-dsc-enable-%s",
- kmstest_connector_type_str(tests[test_cnt])) {
+ igt_subtest_with_dynamic("basic-dsc-enable") {
+ test_conn_cnt = 0;
+ for (j = 0; j < res->count_connectors; j++) {
+ if (!check_dsc_on_connector(&data, res->connectors[j]))
+ continue;
+ test_conn_cnt++;
+ run_test(&data, data.output, test_basic_dsc_enable);
+ }
+ igt_skip_on_f(test_conn_cnt == 0, "DSC not supported on any connector\n");
+ }
+ /* currently we are validating compression bpp on XRGB8888 format only */
+ for (i = DRM_FORMAT_BPC; i <= ((DRM_FORMAT_BPC*3)-1); i++) {
+ igt_subtest_with_dynamic_f("dsc-%dbpp-compression-XRGB8888", i) {
test_conn_cnt = 0;
- for (i = 0; i < res->count_connectors; i++) {
- connector = drmModeGetConnectorCurrent(data.drm_fd,
- res->connectors[i]);
- if (connector->connection != DRM_MODE_CONNECTED ||
- connector->connector_type !=
- tests[test_cnt])
- continue;
- output = igt_output_from_connector(&data.display, connector);
- sprintf(data.conn_name, "%s-%d",
- kmstest_connector_type_str(connector->connector_type),
- connector->connector_type_id);
- if(!is_dp_dsc_supported(&data)) {
- igt_debug("DSC not supported on connector %s \n",
- data.conn_name);
- continue;
- }
- if (connector->connector_type == DRM_MODE_CONNECTOR_DisplayPort &&
- !is_dp_fec_supported(&data)) {
- igt_debug("DSC cannot be enabled without FEC on %s\n",
- data.conn_name);
+ data.compression_bpp = i;
+ igt_require(intel_display_ver(data.devid) >= 13);
+ for (j = 0; j < res->count_connectors; j++) {
+ if (!check_dsc_on_connector(&data, res->connectors[j]))
continue;
- }
test_conn_cnt++;
- run_test(&data, output, test_basic_dsc_enable);
+ run_test(&data, data.output, test_dsc_compression_bpp);
}
- igt_skip_on(test_conn_cnt == 0);
+ igt_skip_on_f(test_conn_cnt == 0, "DSC not supported on any connector\n");
}
}
igt_fixture {
if (connector)
drmModeFreeConnector(connector);
+ test_cleanup(&data);
drmModeFreeResources(res);
close(data.debugfs_fd);
close(data.drm_fd);
--
2.25.1
More information about the Intel-gfx-trybot
mailing list