[PATCH v9] drm/i915: Update memory bandwidth formulae
Srivatsa, Anusha
anusha.srivatsa at intel.com
Tue Oct 26 19:12:59 UTC 2021
From what the bspec says, the changes look good.
Minor feedback below inline.
With that change,
Reviewed-by: Anusha Srivatsa <anusha.srivatsa at intel.com>
> -----Original Message-----
> From: Intel-gfx-trybot <intel-gfx-trybot-bounces at lists.freedesktop.org> On
> Behalf Of Radhakrishna Sripada
> Sent: Friday, October 15, 2021 1:52 PM
> To: intel-gfx-trybot at lists.freedesktop.org
> Subject: [PATCH v9] drm/i915: Update memory bandwidth formulae
>
> The formulae has been updated to include more variables. Make sure the
> code carries the same.
>
> Bspec: 64631, 54023
>
> v2: Make GEN11 follow the default route and fix calculation of
> maxdebw(RK)
> v3: Fix div by zero on default case
> Correct indent for fallthrough(Jani)
> v4: Fix div by zero on gen11.
> v5: Fix 0 max_numchannels case
> v6:
> - Split gen11/gen12 algorithms
> - Fix RKL deburst value
> - Fix difference b/ween ICL and TGL algorithms
> - Protect deinterleave from being 0
> - Warn when numchannels exceeds max_numchannels
> - Fix scaling of clk_max from different units
> - s/deinterleave/channelwidth/ in calculating peakbw
> - Fix off by one for num_planes TGL+
> - Fix SAGV check
> v7: Fix div by zero error on gen11
> v8: Even though the algorithm for gen11 says that we need to return
> derated bw for a qgv point whose planes are less than no of active
> planes, we return 0 for deratedbw when only one plane is allowed.
> We modify the algorithm to accommodate the case where no of active
> planes are same as the min no of planes supported by a qgv point.
> v9: Fix dclk scaling for dg1
>
> Cc: Ville Syrjälä <ville.syrjala at linux.intel.com>
> Suggested-by: Matt Roper <matthew.d.roper at intel.com>
> Signed-off-by: Radhakrishna Sripada <radhakrishna.sripada at intel.com>
> ---
> drivers/gpu/drm/i915/display/intel_bw.c | 211 ++++++++++++++++++++----
> 1 file changed, 179 insertions(+), 32 deletions(-)
>
> diff --git a/drivers/gpu/drm/i915/display/intel_bw.c
> b/drivers/gpu/drm/i915/display/intel_bw.c
> index 8d9d888e9316..15c006194c85 100644
> --- a/drivers/gpu/drm/i915/display/intel_bw.c
> +++ b/drivers/gpu/drm/i915/display/intel_bw.c
> @@ -27,6 +27,9 @@ struct intel_qgv_info {
> u8 num_points;
> u8 num_psf_points;
> u8 t_bl;
> + u8 max_numchannels;
> + u8 channel_width;
> + u8 deinterleave;
> };
>
> static int dg1_mchbar_read_qgv_point_info(struct drm_i915_private
> *dev_priv, @@ -42,7 +45,7 @@ static int
> dg1_mchbar_read_qgv_point_info(struct drm_i915_private *dev_priv,
> dclk_reference = 6; /* 6 * 16.666 MHz = 100 MHz */
> else
> dclk_reference = 8; /* 8 * 16.666 MHz = 133 MHz */
> - sp->dclk = dclk_ratio * dclk_reference;
> + sp->dclk = DIV_ROUND_UP((16667 * dclk_ratio * dclk_reference) +
> 500,
> +1000);
>
> val = intel_uncore_read(&dev_priv->uncore,
> SKL_MC_BIOS_DATA_0_0_0_MCHBAR_PCU);
> if (val & DG1_GEAR_TYPE)
> @@ -69,6 +72,7 @@ static int icl_pcode_read_qgv_point_info(struct
> drm_i915_private *dev_priv,
> int point)
> {
> u32 val = 0, val2 = 0;
> + u16 dclk;
> int ret;
>
> ret = sandybridge_pcode_read(dev_priv, @@ -78,7 +82,8 @@ static
> int icl_pcode_read_qgv_point_info(struct drm_i915_private *dev_priv,
> if (ret)
> return ret;
>
> - sp->dclk = val & 0xffff;
> + dclk = val & 0xffff;
> + sp->dclk = DIV_ROUND_UP((16667 * dclk) + (DISPLAY_VER(dev_priv)
> > 11 ?
> +500 : 0), 1000);
> sp->t_rp = (val & 0xff0000) >> 16;
> sp->t_rcd = (val & 0xff000000) >> 24;
>
> @@ -133,7 +138,8 @@ int icl_pcode_restrict_qgv_points(struct
> drm_i915_private *dev_priv, }
>
> static int icl_get_qgv_points(struct drm_i915_private *dev_priv,
> - struct intel_qgv_info *qi)
> + struct intel_qgv_info *qi,
> + bool is_y_tile)
> {
> const struct dram_info *dram_info = &dev_priv->dram_info;
> int i, ret;
> @@ -144,17 +150,41 @@ static int icl_get_qgv_points(struct
> drm_i915_private *dev_priv,
> if (DISPLAY_VER(dev_priv) == 12)
> switch (dram_info->type) {
> case INTEL_DRAM_DDR4:
> - qi->t_bl = 4;
> + qi->t_bl = is_y_tile ? 8 : 4;
> + qi->max_numchannels = 2;
> + qi->channel_width = 64;
> + qi->deinterleave = is_y_tile ? 1 : 2;
> break;
> case INTEL_DRAM_DDR5:
> - qi->t_bl = 8;
> + qi->t_bl = is_y_tile ? 16 : 8;
> + qi->max_numchannels = 4;
> + qi->channel_width = 32;
> + qi->deinterleave = is_y_tile ? 1 : 2;
> + break;
> + case INTEL_DRAM_LPDDR4:
> + if (IS_ROCKETLAKE(dev_priv)) {
> + qi->t_bl = 8;
> + qi->max_numchannels = 4;
> + qi->channel_width = 32;
> + qi->deinterleave = 2;
> + break;
> + }
> + fallthrough;
> + case INTEL_DRAM_LPDDR5:
> + qi->t_bl = 16;
> + qi->max_numchannels = 8;
> + qi->channel_width = 16;
> + qi->deinterleave = is_y_tile ? 2 : 4;
> break;
> default:
> qi->t_bl = 16;
> + qi->max_numchannels = 1;
> break;
> }
> - else if (DISPLAY_VER(dev_priv) == 11)
> + else if (DISPLAY_VER(dev_priv) == 11) {
> qi->t_bl = dev_priv->dram_info.type == INTEL_DRAM_DDR4 ?
> 4 : 8;
> + qi->max_numchannels = 1;
> + }
>
> if (drm_WARN_ON(&dev_priv->drm,
> qi->num_points > ARRAY_SIZE(qi->points))) @@ -
> 193,12 +223,6 @@ static int icl_get_qgv_points(struct drm_i915_private
> *dev_priv,
> return 0;
> }
>
> -static int icl_calc_bw(int dclk, int num, int den) -{
> - /* multiples of 16.666MHz (100/6) */
> - return DIV_ROUND_CLOSEST(num * dclk * 100, den * 6);
> -}
> -
> static int adl_calc_psf_bw(int clk)
> {
> /*
> @@ -240,7 +264,7 @@ static const struct intel_sa_info tgl_sa_info = { };
>
> static const struct intel_sa_info rkl_sa_info = {
> - .deburst = 16,
> + .deburst = 8,
> .deprogbwlimit = 20, /* GB/s */
> .displayrtids = 128,
> .derating = 10,
> @@ -265,35 +289,130 @@ static int icl_get_bw_info(struct drm_i915_private
> *dev_priv, const struct intel
> struct intel_qgv_info qi = {};
> bool is_y_tile = true; /* assume y tile may be used */
> int num_channels = max_t(u8, 1, dev_priv-
> >dram_info.num_channels);
> - int deinterleave;
> - int ipqdepth, ipqdepthpch;
> + int ipqdepth, ipqdepthpch = 16;
> int dclk_max;
> int maxdebw;
> + int num_groups = ARRAY_SIZE(dev_priv->max_bw);
> int i, ret;
>
> - ret = icl_get_qgv_points(dev_priv, &qi);
> + ret = icl_get_qgv_points(dev_priv, &qi, is_y_tile);
> if (ret) {
> drm_dbg_kms(&dev_priv->drm,
> "Failed to get memory subsystem information,
> ignoring bandwidth limits");
> return ret;
> }
>
> - deinterleave = DIV_ROUND_UP(num_channels, is_y_tile ? 4 : 2);
> dclk_max = icl_sagv_max_dclk(&qi);
> + maxdebw = min(sa->deprogbwlimit * 1000, dclk_max * 16 * 6 / 10);
> + ipqdepth = min(ipqdepthpch, sa->displayrtids / num_channels);
> + qi.deinterleave = DIV_ROUND_UP(num_channels, is_y_tile ? 4 : 2);
> +
> + for (i = 0; i < num_groups; i++) {
> + struct intel_bw_info *bi = &dev_priv->max_bw[i];
> + int clpchgroup;
> + int j;
> +
> + clpchgroup = (sa->deburst * qi.deinterleave / num_channels)
> << i;
> + bi->num_planes = (ipqdepth - clpchgroup) / clpchgroup + 1;
> +
> + bi->num_qgv_points = qi.num_points;
> + bi->num_psf_gv_points = qi.num_psf_points;
> +
> + for (j = 0; j < qi.num_points; j++) {
The j here can be more descriptive to make it easy to understand. s/j/sagv probably?
Thanks,
Anusha
> + const struct intel_qgv_point *sp = &qi.points[j];
> + int ct, bw;
> +
> + /*
> + * Max row cycle time
> + *
> + * FIXME what is the logic behind the
> + * assumed burst length?
> + */
> + ct = max_t(int, sp->t_rc, sp->t_rp + sp->t_rcd +
> + (clpchgroup - 1) * qi.t_bl + sp->t_rdpre);
> + bw = DIV_ROUND_UP(sp->dclk * clpchgroup * 32 *
> num_channels, ct);
>
> - ipqdepthpch = 16;
> + bi->deratedbw[j] = min(maxdebw,
> + bw * (100 - sa->derating) / 100);
> +
> + drm_dbg_kms(&dev_priv->drm,
> + "BW%d / QGV %d: num_planes=%d
> deratedbw=%u\n",
> + i, j, bi->num_planes, bi->deratedbw[j]);
> + }
> + }
> + /*
> + * In case if SAGV is disabled in BIOS, we always get 1
> + * SAGV point, but we can't send PCode commands to restrict it
> + * as it will fail and pointless anyway.
> + */
> + if (qi.num_points == 1)
> + dev_priv->sagv_status = I915_SAGV_NOT_CONTROLLED;
> + else
> + dev_priv->sagv_status = I915_SAGV_ENABLED;
> +
> + return 0;
> +}
> +
> +static int tgl_get_bw_info(struct drm_i915_private *dev_priv, const
> +struct intel_sa_info *sa) {
> + struct intel_qgv_info qi = {};
> + const struct dram_info *dram_info = &dev_priv->dram_info;
> + bool is_y_tile = true; /* assume y tile may be used */
> + int num_channels = max_t(u8, 1, dev_priv-
> >dram_info.num_channels);
> + int ipqdepth, ipqdepthpch = 16;
> + int dclk_max;
> + int maxdebw, peakbw;
> + int clperchgroup;
> + int num_groups = ARRAY_SIZE(dev_priv->max_bw);
> + int i, ret;
> +
> + ret = icl_get_qgv_points(dev_priv, &qi, is_y_tile);
> + if (ret) {
> + drm_dbg_kms(&dev_priv->drm,
> + "Failed to get memory subsystem information,
> ignoring bandwidth limits");
> + return ret;
> + }
> +
> + if (dram_info->type == INTEL_DRAM_LPDDR4 || dram_info->type ==
> INTEL_DRAM_LPDDR5)
> + num_channels *= 2;
> +
> + qi.deinterleave = qi.deinterleave ? : DIV_ROUND_UP(num_channels,
> +is_y_tile ? 4 : 2);
> +
> + if (num_channels < qi.max_numchannels && DISPLAY_VER(dev_priv)
> >= 12)
> + qi.deinterleave = max(DIV_ROUND_UP(qi.deinterleave, 2), 1);
> +
> + if (DISPLAY_VER(dev_priv) > 11 && num_channels >
> qi.max_numchannels)
> + drm_warn(&dev_priv->drm, "Number of channels exceeds
> max number of channels.");
> + if (qi.max_numchannels != 0)
> + num_channels = min_t(u8, num_channels,
> qi.max_numchannels);
> +
> + dclk_max = icl_sagv_max_dclk(&qi);
> +
> + peakbw = num_channels * DIV_ROUND_UP(qi.channel_width, 8) *
> dclk_max;
> + maxdebw = min(sa->deprogbwlimit * 1000, peakbw * 6 / 10); /* 60%
> */
>
> - maxdebw = min(sa->deprogbwlimit * 1000,
> - icl_calc_bw(dclk_max, 16, 1) * 6 / 10); /* 60% */
> ipqdepth = min(ipqdepthpch, sa->displayrtids / num_channels);
> + /*
> + * clperchgroup = 4kpagespermempage * clperchperblock,
> + * clperchperblock = 8 / num_channels * interleave
> + */
> + clperchgroup = 4 * DIV_ROUND_UP(8, num_channels) *
> qi.deinterleave;
>
> - for (i = 0; i < ARRAY_SIZE(dev_priv->max_bw); i++) {
> + for (i = 0; i < num_groups; i++) {
> struct intel_bw_info *bi = &dev_priv->max_bw[i];
> + struct intel_bw_info *bi_next;
> int clpchgroup;
> int j;
>
> - clpchgroup = (sa->deburst * deinterleave / num_channels) <<
> i;
> - bi->num_planes = (ipqdepth - clpchgroup) / clpchgroup + 1;
> + if (i < num_groups - 1)
> + bi_next = &dev_priv->max_bw[i + 1];
> +
> + clpchgroup = (sa->deburst * qi.deinterleave / num_channels)
> << i;
> +
> + if (i < num_groups - 1 && clpchgroup < clperchgroup)
> + bi_next->num_planes = (ipqdepth - clpchgroup) /
> clpchgroup + 1;
> + else
> + bi_next->num_planes = 0;
>
> bi->num_qgv_points = qi.num_points;
> bi->num_psf_gv_points = qi.num_psf_points; @@ -310,7
> +429,7 @@ static int icl_get_bw_info(struct drm_i915_private *dev_priv,
> const struct intel
> */
> ct = max_t(int, sp->t_rc, sp->t_rp + sp->t_rcd +
> (clpchgroup - 1) * qi.t_bl + sp->t_rdpre);
> - bw = icl_calc_bw(sp->dclk, clpchgroup * 32 *
> num_channels, ct);
> + bw = DIV_ROUND_UP(sp->dclk * clpchgroup * 32 *
> num_channels, ct);
>
> bi->deratedbw[j] = min(maxdebw,
> bw * (100 - sa->derating) / 100);
> @@ -329,9 +448,6 @@ static int icl_get_bw_info(struct drm_i915_private
> *dev_priv, const struct intel
> "BW%d / PSF GV %d: num_planes=%d
> bw=%u\n",
> i, j, bi->num_planes, bi->psf_bw[j]);
> }
> -
> - if (bi->num_planes == 1)
> - break;
> }
>
> /*
> @@ -395,6 +511,34 @@ static unsigned int icl_max_bw(struct
> drm_i915_private *dev_priv,
> return 0;
> }
>
> +static unsigned int tgl_max_bw(struct drm_i915_private *dev_priv,
> + int num_planes, int qgv_point) {
> + int i;
> +
> + /*
> + * Let's return max bw for 0 planes
> + */
> + num_planes = max(1, num_planes);
> +
> + for (i = ARRAY_SIZE(dev_priv->max_bw) - 1; i >= 0; i--) {
> + const struct intel_bw_info *bi =
> + &dev_priv->max_bw[i];
> +
> + /*
> + * Pcode will not expose all QGV points when
> + * SAGV is forced to off/min/med/max.
> + */
> + if (qgv_point >= bi->num_qgv_points)
> + return UINT_MAX;
> +
> + if (num_planes <= bi->num_planes)
> + return bi->deratedbw[qgv_point];
> + }
> +
> + return dev_priv->max_bw[0].deratedbw[qgv_point];
> +}
> +
> static unsigned int adl_psf_bw(struct drm_i915_private *dev_priv,
> int psf_gv_point)
> {
> @@ -412,13 +556,13 @@ void intel_bw_init_hw(struct drm_i915_private
> *dev_priv)
> if (IS_DG2(dev_priv))
> dg2_get_bw_info(dev_priv);
> else if (IS_ALDERLAKE_P(dev_priv))
> - icl_get_bw_info(dev_priv, &adlp_sa_info);
> + tgl_get_bw_info(dev_priv, &adlp_sa_info);
> else if (IS_ALDERLAKE_S(dev_priv))
> - icl_get_bw_info(dev_priv, &adls_sa_info);
> + tgl_get_bw_info(dev_priv, &adls_sa_info);
> else if (IS_ROCKETLAKE(dev_priv))
> - icl_get_bw_info(dev_priv, &rkl_sa_info);
> + tgl_get_bw_info(dev_priv, &rkl_sa_info);
> else if (DISPLAY_VER(dev_priv) == 12)
> - icl_get_bw_info(dev_priv, &tgl_sa_info);
> + tgl_get_bw_info(dev_priv, &tgl_sa_info);
> else if (DISPLAY_VER(dev_priv) == 11)
> icl_get_bw_info(dev_priv, &icl_sa_info); } @@ -746,7
> +890,10 @@ int intel_bw_atomic_check(struct intel_atomic_state *state)
> for (i = 0; i < num_qgv_points; i++) {
> unsigned int max_data_rate;
>
> - max_data_rate = icl_max_bw(dev_priv, num_active_planes,
> i);
> + if (DISPLAY_VER(dev_priv) > 11)
> + max_data_rate = tgl_max_bw(dev_priv,
> num_active_planes, i);
> + else
> + max_data_rate = icl_max_bw(dev_priv,
> num_active_planes, i);
> /*
> * We need to know which qgv point gives us
> * maximum bandwidth in order to disable SAGV
> --
> 2.20.1
More information about the Intel-gfx-trybot
mailing list