[PATCH] drm/i915/display: Remove check for low voltage sku for max dp source rate

[Ankit Nautiyal]

The low voltage sku check can be ignored as OEMs need to consider that
when designing the board and then put any limits in VBT.

Bspec changes requested to remove the note for low voltage SKU check.

Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal at intel.com>
---
 drivers/gpu/drm/i915/display/intel_dp.c | 32 +++----------------------
 1 file changed, 3 insertions(+), 29 deletions(-)

diff --git a/drivers/gpu/drm/i915/display/intel_dp.c b/drivers/gpu/drm/i915/display/intel_dp.c
index d28bd8c4a8a5..c534466737c0 100644
--- a/drivers/gpu/drm/i915/display/intel_dp.c
+++ b/drivers/gpu/drm/i915/display/intel_dp.c
@@ -291,23 +291,13 @@ static int dg2_max_source_rate(struct intel_dp *intel_dp)
 	return intel_dp_is_edp(intel_dp) ? 810000 : 1350000;
 }
 
-static bool is_low_voltage_sku(struct drm_i915_private *i915, enum phy phy)
-{
-	u32 voltage;
-
-	voltage = intel_de_read(i915, ICL_PORT_COMP_DW3(phy)) & VOLTAGE_INFO_MASK;
-
-	return voltage == VOLTAGE_INFO_0_85V;
-}
-
 static int icl_max_source_rate(struct intel_dp *intel_dp)
 {
 	struct intel_digital_port *dig_port = dp_to_dig_port(intel_dp);
 	struct drm_i915_private *dev_priv = to_i915(dig_port->base.base.dev);
 	enum phy phy = intel_port_to_phy(dev_priv, dig_port->base.port);
 
-	if (intel_phy_is_combo(dev_priv, phy) &&
-	    (is_low_voltage_sku(dev_priv, phy) || !intel_dp_is_edp(intel_dp)))
+	if (intel_phy_is_combo(dev_priv, phy) && !intel_dp_is_edp(intel_dp))
 		return 540000;
 
 	return 810000;
@@ -315,23 +305,7 @@ static int icl_max_source_rate(struct intel_dp *intel_dp)
 
 static int ehl_max_source_rate(struct intel_dp *intel_dp)
 {
-	struct intel_digital_port *dig_port = dp_to_dig_port(intel_dp);
-	struct drm_i915_private *dev_priv = to_i915(dig_port->base.base.dev);
-	enum phy phy = intel_port_to_phy(dev_priv, dig_port->base.port);
-
-	if (intel_dp_is_edp(intel_dp) || is_low_voltage_sku(dev_priv, phy))
-		return 540000;
-
-	return 810000;
-}
-
-static int dg1_max_source_rate(struct intel_dp *intel_dp)
-{
-	struct intel_digital_port *dig_port = dp_to_dig_port(intel_dp);
-	struct drm_i915_private *i915 = to_i915(dig_port->base.base.dev);
-	enum phy phy = intel_port_to_phy(i915, dig_port->base.port);
-
-	if (intel_phy_is_combo(i915, phy) && is_low_voltage_sku(i915, phy))
+	if (intel_dp_is_edp(intel_dp))
 		return 540000;
 
 	return 810000;
@@ -374,7 +348,7 @@ intel_dp_set_source_rates(struct intel_dp *intel_dp)
 			max_rate = dg2_max_source_rate(intel_dp);
 		else if (IS_ALDERLAKE_P(dev_priv) || IS_ALDERLAKE_S(dev_priv) ||
 			 IS_DG1(dev_priv) || IS_ROCKETLAKE(dev_priv))
-			max_rate = dg1_max_source_rate(intel_dp);
+			max_rate = 810000;
 		else if (IS_JSL_EHL(dev_priv))
 			max_rate = ehl_max_source_rate(intel_dp);
 		else
-- 
2.25.1