[PATCH i-g-t 1/7] tests/kms_plane_scaling: Removal of plane-scaling subtest
Swati Sharma
swati2.sharma at intel.com
Tue Jan 18 06:11:30 UTC 2022
The test case has dead code, primary_plane_scaling is always 0.
Also, upscaling and downscaling scenarios seems little bit messy.
Lets simplify those scenarios by introducing new subtests covering both
upscaling and downscaling scenarios.
Signed-off-by: Swati Sharma <swati2.sharma at intel.com>
---
tests/kms_plane_scaling.c | 179 --------------------------------------
1 file changed, 179 deletions(-)
diff --git a/tests/kms_plane_scaling.c b/tests/kms_plane_scaling.c
index 85db11ee..4e2be7f2 100644
--- a/tests/kms_plane_scaling.c
+++ b/tests/kms_plane_scaling.c
@@ -323,178 +323,6 @@ static void test_scaler_with_pixel_format_pipe(data_t *d, enum pipe pipe, igt_ou
}
}
-/* does iterative scaling on plane2 */
-static void iterate_plane_scaling(data_t *d, drmModeModeInfo *mode)
-{
- igt_display_t *display = &d->display;
-
- if (mode->hdisplay >= d->fb[1].width) {
- int w, h;
- /* fixed fb */
- igt_fb_set_position(&d->fb[1], d->plane2, 0, 0);
- igt_fb_set_size(&d->fb[1], d->plane2, d->fb[1].width, d->fb[1].height);
- igt_plane_set_position(d->plane2, 0, 0);
-
- /* adjust plane size */
- for (w = d->fb[1].width; w <= mode->hdisplay; w+=10) {
- h = w * d->fb[1].height / d->fb[1].width;
- igt_plane_set_size(d->plane2, w, h);
- igt_display_commit2(display, COMMIT_ATOMIC);
- }
- } else {
- int w, h;
- /* fixed plane */
- igt_plane_set_position(d->plane2, 0, 0);
- igt_plane_set_size(d->plane2, mode->hdisplay, mode->vdisplay);
- igt_fb_set_position(&d->fb[1], d->plane2, 0, 0);
-
- /* adjust fb size */
- for (w = mode->hdisplay; w <= d->fb[1].width; w+=10) {
- /* Source coordinates must not be clipped. */
- h = min(w * mode->hdisplay / mode->vdisplay, d->fb[1].height);
- igt_fb_set_size(&d->fb[1], d->plane2, w, h);
- igt_display_commit2(display, COMMIT_ATOMIC);
- }
- }
-}
-
-static void
-test_plane_scaling_on_pipe(data_t *d, enum pipe pipe, igt_output_t *output)
-{
- igt_display_t *display = &d->display;
- igt_pipe_t *pipe_obj = &display->pipes[pipe];
- drmModeModeInfo *mode;
- int primary_plane_scaling = 0; /* For now */
- uint64_t modifier = is_i915_device(display->drm_fd) ?
- I915_FORMAT_MOD_X_TILED : DRM_FORMAT_MOD_LINEAR;
-
- igt_require(get_num_scalers(d, pipe) > 0);
-
- igt_skip_on(!igt_display_has_format_mod(display, DRM_FORMAT_XRGB8888,
- modifier));
-
- mode = igt_output_get_mode(output);
-
- /* Set up display with plane 1 */
- d->plane1 = igt_pipe_get_plane_type(pipe_obj, DRM_PLANE_TYPE_PRIMARY);
- prepare_crtc(d, output, pipe, d->plane1, mode);
-
- igt_create_color_pattern_fb(display->drm_fd, 600, 600,
- DRM_FORMAT_XRGB8888,
- modifier,
- .5, .5, .5, &d->fb[1]);
-
- igt_create_pattern_fb(d->drm_fd,
- mode->hdisplay, mode->vdisplay,
- DRM_FORMAT_XRGB8888,
- modifier,
- &d->fb[2]);
-
- if (primary_plane_scaling) {
- /* Primary plane upscaling */
- igt_fb_set_position(&d->fb[0], d->plane1, 100, 100);
- igt_fb_set_size(&d->fb[0], d->plane1, 500, 500);
- igt_plane_set_position(d->plane1, 0, 0);
- igt_plane_set_size(d->plane1, mode->hdisplay, mode->vdisplay);
- igt_display_commit2(display, COMMIT_ATOMIC);
-
- /* Primary plane 1:1 no scaling */
- igt_fb_set_position(&d->fb[0], d->plane1, 0, 0);
- igt_fb_set_size(&d->fb[0], d->plane1, d->fb[0].width, d->fb[0].height);
- igt_plane_set_position(d->plane1, 0, 0);
- igt_plane_set_size(d->plane1, mode->hdisplay, mode->vdisplay);
- igt_display_commit2(display, COMMIT_ATOMIC);
- }
-
- /* Set up fb[1]->plane2 mapping. */
- d->plane2 = igt_pipe_get_plane_type_index(pipe_obj,
- DRM_PLANE_TYPE_OVERLAY, 0);
-
- if (!d->plane2) {
- igt_debug("Plane-2 doesnt exist on pipe %s\n", kmstest_pipe_name(pipe));
- return;
- }
-
- igt_plane_set_fb(d->plane2, &d->fb[1]);
-
- /* 2nd plane windowed */
- igt_fb_set_position(&d->fb[1], d->plane2, 100, 100);
- igt_fb_set_size(&d->fb[1], d->plane2, d->fb[1].width-200, d->fb[1].height-200);
- igt_plane_set_position(d->plane2, 100, 100);
- igt_plane_set_size(d->plane2, mode->hdisplay-200, mode->vdisplay-200);
- igt_display_commit2(display, COMMIT_ATOMIC);
-
- iterate_plane_scaling(d, mode);
-
- /* 2nd plane up scaling */
- igt_fb_set_position(&d->fb[1], d->plane2, 100, 100);
- igt_fb_set_size(&d->fb[1], d->plane2, 500, 500);
- igt_plane_set_position(d->plane2, 10, 10);
- igt_plane_set_size(d->plane2, mode->hdisplay-20, mode->vdisplay-20);
- igt_display_commit2(display, COMMIT_ATOMIC);
-
- /* 2nd plane downscaling */
- igt_fb_set_position(&d->fb[1], d->plane2, 0, 0);
- igt_fb_set_size(&d->fb[1], d->plane2, d->fb[1].width, d->fb[1].height);
- igt_plane_set_position(d->plane2, 10, 10);
-
- /* Downscale (10/9)x of original image */
- igt_plane_set_size(d->plane2, (d->fb[1].width * 10)/9, (d->fb[1].height * 10)/9);
- igt_display_commit2(display, COMMIT_ATOMIC);
-
- if (primary_plane_scaling) {
- /* Primary plane up scaling */
- igt_fb_set_position(&d->fb[0], d->plane1, 100, 100);
- igt_fb_set_size(&d->fb[0], d->plane1, 500, 500);
- igt_plane_set_position(d->plane1, 0, 0);
- igt_plane_set_size(d->plane1, mode->hdisplay, mode->vdisplay);
- igt_display_commit2(display, COMMIT_ATOMIC);
- }
-
- /* Set up fb[2]->plane3 mapping. */
- d->plane3 = igt_pipe_get_plane_type_index(pipe_obj,
- DRM_PLANE_TYPE_OVERLAY, 1);
- if(!d->plane3) {
- igt_debug("Plane-3 doesnt exist on pipe %s\n", kmstest_pipe_name(pipe));
- return;
- }
-
- igt_plane_set_fb(d->plane3, &d->fb[2]);
-
- /* 3rd plane windowed - no scaling */
- igt_fb_set_position(&d->fb[2], d->plane3, 100, 100);
- igt_fb_set_size(&d->fb[2], d->plane3, d->fb[2].width-300, d->fb[2].height-300);
- igt_plane_set_position(d->plane3, 100, 100);
- igt_plane_set_size(d->plane3, mode->hdisplay-300, mode->vdisplay-300);
- igt_display_commit2(display, COMMIT_ATOMIC);
-
- /* Switch scaler from plane 2 to plane 3 */
- igt_fb_set_position(&d->fb[1], d->plane2, 100, 100);
- igt_fb_set_size(&d->fb[1], d->plane2, d->fb[1].width-200, d->fb[1].height-200);
- igt_plane_set_position(d->plane2, 100, 100);
- igt_plane_set_size(d->plane2, d->fb[1].width-200, d->fb[1].height-200);
-
- igt_fb_set_position(&d->fb[2], d->plane3, 100, 100);
- igt_fb_set_size(&d->fb[2], d->plane3, d->fb[2].width-400, d->fb[2].height-400);
- igt_plane_set_position(d->plane3, 10, 10);
- igt_plane_set_size(d->plane3, mode->hdisplay-300, mode->vdisplay-300);
- igt_display_commit2(display, COMMIT_ATOMIC);
-
- if (primary_plane_scaling) {
- /* Switch scaler from plane 1 to plane 2 */
- igt_fb_set_position(&d->fb[0], d->plane1, 0, 0);
- igt_fb_set_size(&d->fb[0], d->plane1, d->fb[0].width, d->fb[0].height);
- igt_plane_set_position(d->plane1, 0, 0);
- igt_plane_set_size(d->plane1, mode->hdisplay, mode->vdisplay);
-
- igt_fb_set_position(&d->fb[1], d->plane2, 100, 100);
- igt_fb_set_size(&d->fb[1], d->plane2, d->fb[1].width-500,d->fb[1].height-500);
- igt_plane_set_position(d->plane2, 100, 100);
- igt_plane_set_size(d->plane2, mode->hdisplay-200, mode->vdisplay-200);
- igt_display_commit2(display, COMMIT_ATOMIC);
- }
-}
-
static void
__test_scaler_with_clipping_clamping_scenario(data_t *d, drmModeModeInfo *mode)
{
@@ -719,13 +547,6 @@ igt_main_args("", long_opts, help_str, opt_handler, &data)
igt_subtest_group {
igt_output_t *output;
- igt_describe("Tests plane scaling per pipe.");
- igt_subtest_with_dynamic("plane-scaling") {
- for_each_pipe_with_single_output(&data.display, pipe, output)
- igt_dynamic_f("pipe-%s-plane-scaling", kmstest_pipe_name(pipe))
- test_plane_scaling_on_pipe(&data, pipe, output);
- }
-
igt_describe("Tests scaling with pixel formats.");
igt_subtest_with_dynamic("scaler-with-pixel-format") {
for_each_pipe_with_single_output(&data.display, pipe, output)
--
2.25.1
More information about the Intel-gfx-trybot
mailing list