[PATCH] drm/i915: Enable Tile4 tiling mode
Zbigniew Kempczyński
zbigniew.kempczynski at intel.com
Wed May 11 11:48:20 UTC 2022
On Tue, May 10, 2022 at 11:25:03AM +0000, Das, Nirmoy wrote:
> From: Bommu Krishnaiah <krishnaiah.bommu at intel.com>
>
> Enable Tile4 tiling mode on platform that supports
> Tile4 but no TileY like DG2
>
> Signed-off-by Bommu Krishnaiah <krishnaiah.bommu at intel.com>
> Co-Developed-by: Nirmoy Das <nirmoy.das at intel.com>
> ---
> .../i915/gem/selftests/i915_gem_client_blt.c | 239 ++++++++++++++----
> drivers/gpu/drm/i915/gt/intel_gpu_commands.h | 22 ++
> 2 files changed, 215 insertions(+), 46 deletions(-)
>
> diff --git a/drivers/gpu/drm/i915/gem/selftests/i915_gem_client_blt.c b/drivers/gpu/drm/i915/gem/selftests/i915_gem_client_blt.c
> index ddd0772fd828..45cf156aaf73 100644
> --- a/drivers/gpu/drm/i915/gem/selftests/i915_gem_client_blt.c
> +++ b/drivers/gpu/drm/i915/gem/selftests/i915_gem_client_blt.c
> @@ -6,6 +6,7 @@
> #include "i915_selftest.h"
>
> #include "gt/intel_context.h"
> +#include "gt/intel_engine_regs.h"
> #include "gt/intel_engine_user.h"
> #include "gt/intel_gpu_commands.h"
> #include "gt/intel_gt.h"
> @@ -18,10 +19,72 @@
> #include "huge_gem_object.h"
> #include "mock_context.h"
>
> +#define I915_TILING_4 PRELIM_I915_TILING_4
Macro is not used, remove it.
> +#define OW_SIZE 16 /* in bytes */
> +#define F_SUBTILE_SIZE 64 /* in bytes */
> +#define F_TILE_WIDTH 128 /* in bytes */
> +#define F_TILE_HEIGHT 32 /* in pixels */
> +#define F_SUBTILE_WIDTH OW_SIZE /* in bytes */
> +#define F_SUBTILE_HEIGHT 4 /* in pixels */
> +
> +static int linear_x_y_to_ftiled_pos(int x, int y, u32 stride, int bpp)
> +{
> + int tile_base;
> + int tile_x, tile_y;
> + int swizzle, subtile;
> + int pixel_size = bpp / 8;
> + int pos;
> +
> + /*
> + * Subtile remapping for F tile. Note that map[a]==b implies map[b]==a
> + * so we can use the same table to tile and until.
> + */
> + static const u8 f_subtile_map[] = {
> + 0, 1, 2, 3, 8, 9, 10, 11,
> + 4, 5, 6, 7, 12, 13, 14, 15,
> + 16, 17, 18, 19, 24, 25, 26, 27,
> + 20, 21, 22, 23, 28, 29, 30, 31,
> + 32, 33, 34, 35, 40, 41, 42, 43,
> + 36, 37, 38, 39, 44, 45, 46, 47,
> + 48, 49, 50, 51, 56, 57, 58, 59,
> + 52, 53, 54, 55, 60, 61, 62, 63
> + };
> +
> + x *= pixel_size;
> + /*
> + * Where does the 4k tile start (in bytes)? This is the same for Y and
> + * F so we can use the Y-tile algorithm to get to that point.
> + */
> + tile_base =
> + y / F_TILE_HEIGHT * stride * F_TILE_HEIGHT +
> + x / F_TILE_WIDTH * 4096;
> +
> + /* Find pixel within tile */
> + tile_x = x % F_TILE_WIDTH;
> + tile_y = y % F_TILE_HEIGHT;
> +
> + /* And figure out the subtile within the 4k tile */
> + subtile = tile_y / F_SUBTILE_HEIGHT * 8 + tile_x / F_SUBTILE_WIDTH;
> +
> + /* Swizzle the subtile number according to the bspec diagram */
> + swizzle = f_subtile_map[subtile];
> +
> + /* Calculate new position */
> + pos = tile_base +
> + swizzle * F_SUBTILE_SIZE +
> + tile_y % F_SUBTILE_HEIGHT * OW_SIZE +
> + tile_x % F_SUBTILE_WIDTH;
> +
> + GEM_BUG_ON(!IS_ALIGNED(pos, pixel_size));
> +
> + return pos / pixel_size * 4;
> +}
> +
> enum client_tiling {
> CLIENT_TILING_LINEAR,
> CLIENT_TILING_X,
> CLIENT_TILING_Y,
> + CLIENT_TILING_4,
> CLIENT_NUM_TILING_TYPES
> };
>
> @@ -45,6 +108,19 @@ struct tiled_blits {
> u32 height;
> };
>
> +static bool fast_blit_ok(struct blit_buffer *buf)
> +{
> + int gen = GRAPHICS_VER(buf->vma->vm->i915);
> +
> + if (gen < 9)
> + return false;
> +
> + if (gen < 12)
> + return true;
> +
> + return buf->tiling != CLIENT_TILING_X;
Only DG1 doesn't support X tiling on discrete, so I would change this to:
return !IS_DG1(buf->vma->vm->i915) || buf->tiling != CLIENT_TILING_X;
Other things looks ok for me, with above fixed you'll get my r-b.
--
Zbigniew
> +}
> +
> static int prepare_blit(const struct tiled_blits *t,
> struct blit_buffer *dst,
> struct blit_buffer *src,
> @@ -59,54 +135,109 @@ static int prepare_blit(const struct tiled_blits *t,
> if (IS_ERR(cs))
> return PTR_ERR(cs);
>
> - *cs++ = MI_LOAD_REGISTER_IMM(1);
> - *cs++ = i915_mmio_reg_offset(BCS_SWCTRL);
> - cmd = (BCS_SRC_Y | BCS_DST_Y) << 16;
> - if (src->tiling == CLIENT_TILING_Y)
> - cmd |= BCS_SRC_Y;
> - if (dst->tiling == CLIENT_TILING_Y)
> - cmd |= BCS_DST_Y;
> - *cs++ = cmd;
> -
> - cmd = MI_FLUSH_DW;
> - if (ver >= 8)
> - cmd++;
> - *cs++ = cmd;
> - *cs++ = 0;
> - *cs++ = 0;
> - *cs++ = 0;
> -
> - cmd = XY_SRC_COPY_BLT_CMD | BLT_WRITE_RGBA | (8 - 2);
> - if (ver >= 8)
> - cmd += 2;
> -
> - src_pitch = t->width * 4;
> - if (src->tiling) {
> - cmd |= XY_SRC_COPY_BLT_SRC_TILED;
> - src_pitch /= 4;
> - }
> + /*
> + * On GEN12+ X-tiled format support is removed from the fast blit
> + * command, so use the XY_SRC blit command for it instead.
> + */
> + if (fast_blit_ok(dst) && fast_blit_ok(src)) {
> + struct intel_gt *gt = t->ce->engine->gt;
> + u32 src_tiles = 0, dst_tiles = 0;
> + u32 src_4t = 0, dst_4t = 0;
> +
> + /* Need to program BLIT_CCTL if it is not done previously
> + * before using XY_FAST_COPY_BLT
> + */
> + *cs++ = MI_LOAD_REGISTER_IMM(1);
> + *cs++ = i915_mmio_reg_offset(BLIT_CCTL(t->ce->engine->mmio_base));
> + *cs++ = (BLIT_CCTL_SRC_MOCS(gt->mocs.uc_index) |
> + BLIT_CCTL_DST_MOCS(gt->mocs.uc_index));
> +
> + src_pitch = t->width; /* in dwords */
> + if (src->tiling == CLIENT_TILING_4) {
> + src_tiles = XY_FAST_COPY_BLT_D0_SRC_TILE_MODE(YMAJOR);
> + src_4t = XY_FAST_COPY_BLT_D1_SRC_TILE4;
> + } else if (src->tiling == CLIENT_TILING_Y) {
> + src_tiles = XY_FAST_COPY_BLT_D0_SRC_TILE_MODE(YMAJOR);
> + } else if (src->tiling == CLIENT_TILING_X) {
> + src_tiles = XY_FAST_COPY_BLT_D0_SRC_TILE_MODE(TILE_X);
> + } else {
> + src_pitch *= 4; /* in bytes */
> + }
>
> - dst_pitch = t->width * 4;
> - if (dst->tiling) {
> - cmd |= XY_SRC_COPY_BLT_DST_TILED;
> - dst_pitch /= 4;
> - }
> + dst_pitch = t->width; /* in dwords */
> + if (dst->tiling == CLIENT_TILING_4) {
> + dst_tiles = XY_FAST_COPY_BLT_D0_DST_TILE_MODE(YMAJOR);
> + dst_4t = XY_FAST_COPY_BLT_D1_DST_TILE4;
> + } else if (dst->tiling == CLIENT_TILING_Y) {
> + dst_tiles = XY_FAST_COPY_BLT_D0_DST_TILE_MODE(YMAJOR);
> + } else if (dst->tiling == CLIENT_TILING_X) {
> + dst_tiles = XY_FAST_COPY_BLT_D0_DST_TILE_MODE(TILE_X);
> + } else {
> + dst_pitch *= 4; /* in bytes */
> + }
>
> - *cs++ = cmd;
> - *cs++ = BLT_DEPTH_32 | BLT_ROP_SRC_COPY | dst_pitch;
> - *cs++ = 0;
> - *cs++ = t->height << 16 | t->width;
> - *cs++ = lower_32_bits(dst->vma->node.start);
> - if (use_64b_reloc)
> + *cs++ = GEN9_XY_FAST_COPY_BLT_CMD | (10 - 2) |
> + src_tiles | dst_tiles;
> + *cs++ = src_4t | dst_4t | BLT_DEPTH_32 | dst_pitch;
> + *cs++ = 0;
> + *cs++ = t->height << 16 | t->width;
> + *cs++ = lower_32_bits(dst->vma->node.start);
> *cs++ = upper_32_bits(dst->vma->node.start);
> - *cs++ = 0;
> - *cs++ = src_pitch;
> - *cs++ = lower_32_bits(src->vma->node.start);
> - if (use_64b_reloc)
> + *cs++ = 0;
> + *cs++ = src_pitch;
> + *cs++ = lower_32_bits(src->vma->node.start);
> *cs++ = upper_32_bits(src->vma->node.start);
> + } else {
> + if (ver >= 6) {
> + *cs++ = MI_LOAD_REGISTER_IMM(1);
> + *cs++ = i915_mmio_reg_offset(BCS_SWCTRL);
> + cmd = (BCS_SRC_Y | BCS_DST_Y) << 16;
> + if (src->tiling == CLIENT_TILING_Y)
> + cmd |= BCS_SRC_Y;
> + if (dst->tiling == CLIENT_TILING_Y)
> + cmd |= BCS_DST_Y;
> + *cs++ = cmd;
> +
> + cmd = MI_FLUSH_DW;
> + if (ver >= 8)
> + cmd++;
> + *cs++ = cmd;
> + *cs++ = 0;
> + *cs++ = 0;
> + *cs++ = 0;
> + }
>
> - *cs++ = MI_BATCH_BUFFER_END;
> + cmd = XY_SRC_COPY_BLT_CMD | BLT_WRITE_RGBA | (8 - 2);
> + if (ver >= 8)
> + cmd += 2;
> +
> + src_pitch = t->width * 4;
> + if (src->tiling) {
> + cmd |= XY_SRC_COPY_BLT_SRC_TILED;
> + src_pitch /= 4;
> + }
> +
> + dst_pitch = t->width * 4;
> + if (dst->tiling) {
> + cmd |= XY_SRC_COPY_BLT_DST_TILED;
> + dst_pitch /= 4;
> + }
> +
> + *cs++ = cmd;
> + *cs++ = BLT_DEPTH_32 | BLT_ROP_SRC_COPY | dst_pitch;
> + *cs++ = 0;
> + *cs++ = t->height << 16 | t->width;
> + *cs++ = lower_32_bits(dst->vma->node.start);
> + if (use_64b_reloc)
> + *cs++ = upper_32_bits(dst->vma->node.start);
> + *cs++ = 0;
> + *cs++ = src_pitch;
> + *cs++ = lower_32_bits(src->vma->node.start);
> + if (use_64b_reloc)
> + *cs++ = upper_32_bits(dst->vma->node.start);
> + }
>
> + *cs++ = MI_BATCH_BUFFER_END;
> i915_gem_object_flush_map(batch);
> i915_gem_object_unpin_map(batch);
>
> @@ -181,7 +312,13 @@ static int tiled_blits_create_buffers(struct tiled_blits *t,
>
> t->buffers[i].vma = vma;
> t->buffers[i].tiling =
> - i915_prandom_u32_max_state(CLIENT_TILING_Y + 1, prng);
> + i915_prandom_u32_max_state(CLIENT_NUM_TILING_TYPES, prng);
> +
> + /* Platforms support either TileY or Tile4, not both */
> + if (HAS_4TILE(i915) && t->buffers[i].tiling == CLIENT_TILING_Y)
> + t->buffers[i].tiling = CLIENT_TILING_4;
> + else if (!HAS_4TILE(i915) && t->buffers[i].tiling == CLIENT_TILING_4)
> + t->buffers[i].tiling = CLIENT_TILING_Y;
> }
>
> return 0;
> @@ -206,7 +343,8 @@ static u64 swizzle_bit(unsigned int bit, u64 offset)
> static u64 tiled_offset(const struct intel_gt *gt,
> u64 v,
> unsigned int stride,
> - enum client_tiling tiling)
> + enum client_tiling tiling,
> + int x_pos, int y_pos)
> {
> unsigned int swizzle;
> u64 x, y;
> @@ -216,7 +354,12 @@ static u64 tiled_offset(const struct intel_gt *gt,
>
> y = div64_u64_rem(v, stride, &x);
>
> - if (tiling == CLIENT_TILING_X) {
> + if (tiling == CLIENT_TILING_4) {
> + v = linear_x_y_to_ftiled_pos(x_pos, y_pos, stride, 32);
> +
> + /* no swizzling for f-tiling */
> + swizzle = I915_BIT_6_SWIZZLE_NONE;
> + } else if (tiling == CLIENT_TILING_X) {
> v = div64_u64_rem(y, 8, &y) * stride * 8;
> v += y * 512;
> v += div64_u64_rem(x, 512, &x) << 12;
> @@ -259,6 +402,7 @@ static const char *repr_tiling(enum client_tiling tiling)
> case CLIENT_TILING_LINEAR: return "linear";
> case CLIENT_TILING_X: return "X";
> case CLIENT_TILING_Y: return "Y";
> + case CLIENT_TILING_4: return "F";
> default: return "unknown";
> }
> }
> @@ -284,7 +428,7 @@ static int verify_buffer(const struct tiled_blits *t,
> } else {
> u64 v = tiled_offset(buf->vma->vm->gt,
> p * 4, t->width * 4,
> - buf->tiling);
> + buf->tiling, x, y);
>
> if (vaddr[v / sizeof(*vaddr)] != buf->start_val + p)
> ret = -EINVAL;
> @@ -504,6 +648,9 @@ static int tiled_blits_bounce(struct tiled_blits *t, struct rnd_state *prng)
> if (err)
> return err;
>
> + /* Simulating GTT eviction of the same buffer / layout */
> + t->buffers[2].tiling = t->buffers[0].tiling;
> +
> /* Reposition so that we overlap the old addresses, and slightly off */
> err = tiled_blit(t,
> &t->buffers[2], t->hole + t->align,
> diff --git a/drivers/gpu/drm/i915/gt/intel_gpu_commands.h b/drivers/gpu/drm/i915/gt/intel_gpu_commands.h
> index 556bca3be804..e53db7c1bdc0 100644
> --- a/drivers/gpu/drm/i915/gt/intel_gpu_commands.h
> +++ b/drivers/gpu/drm/i915/gt/intel_gpu_commands.h
> @@ -236,6 +236,28 @@
> #define XY_FAST_COLOR_BLT_DW 16
> #define XY_FAST_COLOR_BLT_MOCS_MASK GENMASK(27, 21)
> #define XY_FAST_COLOR_BLT_MEM_TYPE_SHIFT 31
> +
> +#define XY_FAST_COPY_BLT_D0_SRC_TILING_MASK REG_GENMASK(21, 20)
> +#define XY_FAST_COPY_BLT_D0_DST_TILING_MASK REG_GENMASK(14, 13)
> +#define XY_FAST_COPY_BLT_D0_SRC_TILE_MODE(mode) \
> + REG_FIELD_PREP(XY_FAST_COPY_BLT_D0_SRC_TILING_MASK, mode)
> +#define XY_FAST_COPY_BLT_D0_DST_TILE_MODE(mode) \
> + REG_FIELD_PREP(XY_FAST_COPY_BLT_D0_DST_TILING_MASK, mode)
> +#define LINEAR 0
> +#define TILE_X 0x1
> +#define XMAJOR 0x1
> +#define YMAJOR 0x2
> +#define TILE_64 0x3
> +#define XY_FAST_COPY_BLT_D1_SRC_TILE4 REG_BIT(31)
> +#define XY_FAST_COPY_BLT_D1_DST_TILE4 REG_BIT(30)
> +#define BLIT_CCTL_SRC_MOCS_MASK REG_GENMASK(6, 0)
> +#define BLIT_CCTL_DST_MOCS_MASK REG_GENMASK(14, 8)
> +/* Note: MOCS value = (index << 1) */
> +#define BLIT_CCTL_SRC_MOCS(idx) \
> + REG_FIELD_PREP(BLIT_CCTL_SRC_MOCS_MASK, idx << 1)
> +#define BLIT_CCTL_DST_MOCS(idx) \
> + REG_FIELD_PREP(BLIT_CCTL_DST_MOCS_MASK, idx << 1)
> +
> #define SRC_COPY_BLT_CMD (2 << 29 | 0x43 << 22)
> #define GEN9_XY_FAST_COPY_BLT_CMD (2 << 29 | 0x42 << 22)
> #define XY_SRC_COPY_BLT_CMD (2 << 29 | 0x53 << 22)
> --
> 2.35.1
>
More information about the Intel-gfx-trybot
mailing list