[PATCH i-g-t] tests/i915/i915_pm_backlight: Add new subtest to validate dual panel backlight
Nidhi Gupta
nidhi1.gupta at intel.com
Mon Oct 31 09:04:46 UTC 2022
Since driver can now support multiple eDPs and Debugfs structure for
backlight changed per connector the test should then iterate through
all eDP connectors.
Signed-off-by: Nidhi Gupta <nidhi1.gupta at intel.com>
---
tests/i915/i915_pm_backlight.c | 196 ++++++++++++++++++++++++++++++-----------
1 file changed, 143 insertions(+), 53 deletions(-)
diff --git a/tests/i915/i915_pm_backlight.c b/tests/i915/i915_pm_backlight.c
index cafae7f..0109eaf 100644
--- a/tests/i915/i915_pm_backlight.c
+++ b/tests/i915/i915_pm_backlight.c
@@ -34,28 +34,31 @@
#include <errno.h>
#include <unistd.h>
#include <time.h>
+#include "igt_device.h"
+#include "igt_device_scan.h"
struct context {
int max;
+ char path[PATH_MAX];
};
#define TOLERANCE 5 /* percent */
-#define BACKLIGHT_PATH "/sys/class/backlight/intel_backlight"
+#define BACKLIGHT_PATH "/sys/class/backlight"
#define FADESTEPS 10
#define FADESPEED 100 /* milliseconds between steps */
IGT_TEST_DESCRIPTION("Basic backlight sysfs test");
-static int backlight_read(int *result, const char *fname)
+static int backlight_read(int *result, const char *fname, struct context *context)
{
int fd;
char full[PATH_MAX];
- char dst[64];
+ char dst[512];
int r, e;
- igt_assert(snprintf(full, PATH_MAX, "%s/%s", BACKLIGHT_PATH, fname) < PATH_MAX);
+ igt_assert(snprintf(full, PATH_MAX, "%s/%s/%s", BACKLIGHT_PATH, context->path, fname) < PATH_MAX);
fd = open(full, O_RDONLY);
if (fd == -1)
@@ -73,14 +76,14 @@ static int backlight_read(int *result, const char *fname)
return errno;
}
-static int backlight_write(int value, const char *fname)
+static int backlight_write(int value, const char *fname, struct context *context)
{
int fd;
char full[PATH_MAX];
char src[64];
int len;
- igt_assert(snprintf(full, PATH_MAX, "%s/%s", BACKLIGHT_PATH, fname) < PATH_MAX);
+ igt_assert(snprintf(full, PATH_MAX, "%s/%s/%s", BACKLIGHT_PATH, context->path, fname) < PATH_MAX);
fd = open(full, O_WRONLY);
if (fd == -1)
return -errno;
@@ -100,12 +103,12 @@ static void test_and_verify(struct context *context, int val)
const int tolerance = val * TOLERANCE / 100;
int result;
- igt_assert_eq(backlight_write(val, "brightness"), 0);
- igt_assert_eq(backlight_read(&result, "brightness"), 0);
+ igt_assert_eq(backlight_write(val, "brightness", context), 0);
+ igt_assert_eq(backlight_read(&result, "brightness", context), 0);
/* Check that the exact value sticks */
igt_assert_eq(result, val);
- igt_assert_eq(backlight_read(&result, "actual_brightness"), 0);
+ igt_assert_eq(backlight_read(&result, "actual_brightness", context), 0);
/* Some rounding may happen depending on hw */
igt_assert_f(result >= max(0, val - tolerance) &&
result <= min(context->max, val + tolerance),
@@ -124,16 +127,16 @@ static void test_bad_brightness(struct context *context)
{
int val;
/* First write some sane value */
- backlight_write(context->max / 2, "brightness");
+ backlight_write(context->max / 2, "brightness", context);
/* Writing invalid values should fail and not change the value */
- igt_assert_lt(backlight_write(-1, "brightness"), 0);
- backlight_read(&val, "brightness");
+ igt_assert_lt(backlight_write(-1, "brightness", context), 0);
+ backlight_read(&val, "brightness", context);
igt_assert_eq(val, context->max / 2);
- igt_assert_lt(backlight_write(context->max + 1, "brightness"), 0);
- backlight_read(&val, "brightness");
+ igt_assert_lt(backlight_write(context->max + 1, "brightness", context), 0);
+ backlight_read(&val, "brightness", context);
igt_assert_eq(val, context->max / 2);
- igt_assert_lt(backlight_write(INT_MAX, "brightness"), 0);
- backlight_read(&val, "brightness");
+ igt_assert_lt(backlight_write(INT_MAX, "brightness", context), 0);
+ backlight_read(&val, "brightness", context);
igt_assert_eq(val, context->max / 2);
}
@@ -179,21 +182,58 @@ test_fade_with_suspend(struct context *context, igt_output_t *output)
test_fade(context);
}
+static void test_setup(igt_output_t *output, igt_display_t display)
+{
+ igt_plane_t *primary;
+ drmModeModeInfo *mode;
+ struct igt_fb fb;
+ igt_output_t *first_output = NULL;
+ enum pipe pipe, first = PIPE_NONE;
+
+ igt_display_reset(&display);
+
+ for_each_pipe_with_valid_output(&display, pipe, output) {
+ if (first == pipe || output == first_output) {
+ continue;
+ if (output->config.connector->connector_type != DRM_MODE_CONNECTOR_eDP)
+ continue;
+ } else {
+ first = pipe;
+ first_output = output;
+ igt_output_set_pipe(output, pipe);
+ }
+
+ mode = igt_output_get_mode(output);
+
+ igt_create_pattern_fb(display.drm_fd,
+ mode->hdisplay, mode->vdisplay,
+ DRM_FORMAT_XRGB8888,
+ DRM_FORMAT_MOD_LINEAR, &fb);
+ primary = igt_output_get_plane_type(output, DRM_PLANE_TYPE_PRIMARY);
+ igt_plane_set_fb(primary, &fb);
+
+ igt_display_commit2(&display, display.is_atomic ? COMMIT_ATOMIC : COMMIT_LEGACY);
+ igt_pm_enable_sata_link_power_management();
+ }
+}
+
igt_main
{
struct context context = {0};
- int old;
+ int old, fd;
+ int count = 0;
igt_display_t display;
igt_output_t *output;
struct igt_fb fb;
+ char buffer_n[PATH_MAX];
+ char const *path_n[2];
+ char file_path_n[PATH_MAX] = "";
igt_fixture {
enum pipe pipe;
bool found = false;
char full_name[32] = {};
char *name;
- drmModeModeInfo *mode;
- igt_plane_t *primary;
/*
* Backlight tests requires the output to be enabled,
@@ -202,53 +242,103 @@ igt_main
kmstest_set_vt_graphics_mode();
igt_display_require(&display, drm_open_driver(DRIVER_INTEL));
- /* Get the max value and skip the whole test if sysfs interface not available */
- igt_skip_on(backlight_read(&old, "brightness"));
- igt_assert(backlight_read(&context.max, "max_brightness") > -1);
-
- /* should be ../../cardX-$output */
- igt_assert_lt(12, readlink(BACKLIGHT_PATH "/device", full_name, sizeof(full_name) - 1));
- name = basename(full_name);
-
- for_each_pipe_with_valid_output(&display, pipe, output) {
+ for (int i = 0; i < 2; i++) {
+ if (i == 0)
+ path_n[i] = "intel_backlight";
+ else {
+ for_each_pipe_with_valid_output(&display, pipe, output) {
+ snprintf(buffer_n, PATH_MAX, "card%i-%s-backlight", igt_device_get_card_index(display.drm_fd), igt_output_name(output));
+ snprintf(file_path_n, PATH_MAX, "%s/%s/brightness", BACKLIGHT_PATH, buffer_n);
+ fd = open(file_path_n, O_RDONLY);
+ if (fd == -1)
+ continue;
+ close(fd);
+ path_n[i] = buffer_n;
+ break;
+ }
+ }
+
+ /* should be ../../cardX-$output */
+ snprintf(file_path_n, PATH_MAX, "%s/%s/device", BACKLIGHT_PATH, path_n[i]);
+ igt_debug("NIDHI: PATH: %s", file_path_n);
+ igt_assert_lt(16, readlink(file_path_n, full_name, sizeof(full_name) - 1));
+ name = basename(full_name);
+
+ for_each_pipe_with_valid_output(&display, pipe, output) {
if (strcmp(name + 6, output->name))
continue;
found = true;
break;
- }
+ }
- igt_require_f(found,
- "Could not map backlight for \"%s\" to connected output\n",
- name);
+ igt_require_f(found,
+ "Could not map backlight for \"%s\" to connected output\n",
+ name);
+ count++;
+ }
+ test_setup(output, display);
+ }
- igt_output_set_pipe(output, pipe);
- mode = igt_output_get_mode(output);
+ igt_subtest_with_dynamic("basic-brightness") {
+ for (int j = 0; j < count; j++) {
+ igt_dynamic_f("connector-%i", j) {
+ strcpy(context.path, path_n[j]);
+ igt_skip_on(backlight_read(&old, "brightness", &context));
+ igt_assert(backlight_read(&context.max, "max_brightness", &context) > -1);
+ test_brightness(&context);
+ }
+ }
+ }
+ igt_subtest_with_dynamic("bad-brightness") {
+ for (int j = 0; j < count; j++) {
+ igt_dynamic_f("connector-%i", j) {
+ strcpy(context.path, path_n[j]);
+ igt_skip_on(backlight_read(&old, "brightness", &context));
+ igt_assert(backlight_read(&context.max, "max_brightness", &context) > -1);
+ test_bad_brightness(&context);
+ }
+ }
+ }
- igt_create_pattern_fb(display.drm_fd,
- mode->hdisplay, mode->vdisplay,
- DRM_FORMAT_XRGB8888,
- DRM_FORMAT_MOD_LINEAR, &fb);
- primary = igt_output_get_plane_type(output, DRM_PLANE_TYPE_PRIMARY);
- igt_plane_set_fb(primary, &fb);
+ igt_subtest_with_dynamic("fade") {
+ for (int j = 0; j < count; j++) {
+ igt_dynamic_f("connector-%i", j) {
+ strcpy(context.path, path_n[j]);
+ igt_skip_on(backlight_read(&old, "brightness", &context));
+ igt_assert(backlight_read(&context.max, "max_brightness", &context) > -1);
+ test_fade(&context);
+ }
+ }
+ }
- igt_display_commit2(&display, display.is_atomic ? COMMIT_ATOMIC : COMMIT_LEGACY);
- igt_pm_enable_sata_link_power_management();
+ igt_subtest_with_dynamic("fade_with_dpms") {
+ for (int j = 0; j < count; j++) {
+ igt_dynamic_f("connector-%i", j) {
+ strcpy(context.path, path_n[j]);
+ igt_skip_on(backlight_read(&old, "brightness", &context));
+ igt_assert(backlight_read(&context.max, "max_brightness", &context) > -1);
+ test_fade_with_dpms(&context, output);
+ }
+ }
}
- igt_subtest("basic-brightness")
- test_brightness(&context);
- igt_subtest("bad-brightness")
- test_bad_brightness(&context);
- igt_subtest("fade")
- test_fade(&context);
- igt_subtest("fade_with_dpms")
- test_fade_with_dpms(&context, output);
- igt_subtest("fade_with_suspend")
- test_fade_with_suspend(&context, output);
+ igt_subtest_with_dynamic("fade_with_suspend") {
+ for (int j = 0; j < count; j++) {
+ igt_dynamic_f("connector-%i", j) {
+ strcpy(context.path, path_n[j]);
+ igt_skip_on(backlight_read(&old, "brightness", &context));
+ igt_assert(backlight_read(&context.max, "max_brightness", &context) > -1);
+ test_fade_with_suspend(&context, output);
+ }
+ }
+ }
igt_fixture {
/* Restore old brightness */
- backlight_write(old, "brightness");
+ for (int j = 0; j < count; j++) {
+ strcpy(context.path, path_n[j]);
+ backlight_write(old, "brightness", &context);
+ }
igt_display_fini(&display);
igt_remove_fb(display.drm_fd, &fb);
--
1.9.1
More information about the Intel-gfx-trybot
mailing list