[PATCH 16/32] drm/i915/dp: Make sure the DSC PPS SDP is disabled whenever DSC is disabled

[Imre Deak]

Atm the DSC PPS SDP will stay enabled after enabling and disabling DSC.
This leaves an output blank after switching off DSC on it. Make sure the
SDP is disabled for an uncompressed output.

v2:
- Disable the SDP already during output disabling. (Ville)

Cc: Ville Syrjälä <ville.syrjala at linux.intel.com>
Reviewed-by: Stanislav Lisovskiy <stanislav.lisovskiy at intel.com>
Signed-off-by: Imre Deak <imre.deak at intel.com>
---
 drivers/gpu/drm/i915/display/intel_dp.c     | 5 ++++-
 drivers/gpu/drm/i915/display/intel_dp_mst.c | 5 ++---
 2 files changed, 6 insertions(+), 4 deletions(-)

diff --git a/drivers/gpu/drm/i915/display/intel_dp.c b/drivers/gpu/drm/i915/display/intel_dp.c
index d3c4f9495ca65..1dfdf14ad4160 100644
--- a/drivers/gpu/drm/i915/display/intel_dp.c
+++ b/drivers/gpu/drm/i915/display/intel_dp.c
@@ -4069,7 +4069,10 @@ void intel_dp_set_infoframes(struct intel_encoder *encoder,
 			 VIDEO_DIP_ENABLE_SPD_HSW | VIDEO_DIP_ENABLE_DRM_GLK;
 	u32 val = intel_de_read(dev_priv, reg) & ~dip_enable;
 
-	/* TODO: Add DSC case (DIP_ENABLE_PPS) */
+	/* TODO: Sanitize DSC enabling wrt. intel_dsc_dp_pps_write(). */
+	if (!enable && HAS_DSC(dev_priv))
+		val &= ~VDIP_ENABLE_PPS;
+
 	/* When PSR is enabled, this routine doesn't disable VSC DIP */
 	if (!crtc_state->has_psr)
 		val &= ~VIDEO_DIP_ENABLE_VSC_HSW;
diff --git a/drivers/gpu/drm/i915/display/intel_dp_mst.c b/drivers/gpu/drm/i915/display/intel_dp_mst.c
index 5efc3cea73e52..afa6d428cb0c6 100644
--- a/drivers/gpu/drm/i915/display/intel_dp_mst.c
+++ b/drivers/gpu/drm/i915/display/intel_dp_mst.c
@@ -746,9 +746,8 @@ static void intel_mst_post_disable_dp(struct intel_atomic_state *state,
 	 * BSpec 4287: disable DIP after the transcoder is disabled and before
 	 * the transcoder clock select is set to none.
 	 */
-	if (last_mst_stream)
-		intel_dp_set_infoframes(&dig_port->base, false,
-					old_crtc_state, NULL);
+	intel_dp_set_infoframes(&dig_port->base, false,
+				old_crtc_state, NULL);
 	/*
 	 * From TGL spec: "If multi-stream slave transcoder: Configure
 	 * Transcoder Clock Select to direct no clock to the transcoder"
-- 
2.39.2