[PATCH 4/4] drm/i915: Implement vblank synchronized MBUS join changes
Stanislav Lisovskiy
stanislav.lisovskiy at intel.com
Sun Mar 17 17:24:16 UTC 2024
Currently we can't change MBUS join status without doing a modeset,
because we are lacking mechanism to synchronize those with vblank.
However then this means that we can't do a fastset, if there is a need
to change MBUS join state. Fix that by implementing such change.
We already call correspondent check and update at pre_plane dbuf update,
so the only thing left is to have a non-modeset version of that.
If active pipes stay the same then fastset is possible and only MBUS
join state/ddb allocation updates would be committed.
v2: Implement additional changes according to BSpec.
Vblank wait is needed after MBus/Dbuf programming in case if
no modeset is done and we are switching from single to multiple
displays, i.e mbus join state switches from "joined" to "non-joined"
state. Otherwise vblank wait is not needed according to spec.
v3: Split mbus and dbox programming into to pre/post plane update parts,
how it should be done according to BSpec.
v4: - Place "single display to multiple displays scenario" MBUS/DBOX programming
after DDB reallocation, but before crtc enabling(that is where is has
to be according to spec).
- Check if crtc is still active, not only the old state.
- Do a vblank wait if MBUX DBOX register was modified.
- And of course do vblank wait only if crtc was active.
- Do vblank wait only if we are not doing a modeset, if we are doing
something before *commit_modeset_enables, because all crtcs might be
disabled at this moment, so we will get WARN if try waiting for vblank
then.
- Still getting FIFO underrun so try waiting for vblank in pre_plane update
as well.
- Write also pipe that we need to sync with to MBUS_CTL register.
v5: - Do vblank wait only for the first pipe, if mbus is joined
- Check also if new/old_dbuf_state is not NULL, before getting single pipe
and active pipes.
v6: - Add pre/post ddb call sites for doing mbus/mbox updates for switching
between single/multiple displays(Ville Syrjälä)
- When writing MBUS_CTL check if synced pipe is enabled, otherwise use
PIPE_NONE sync option(Ville Syrjälä)
- Use for_each_crtc_in_pipe_mask to go through all active pipes, not
just ones in state, when updating mbox registers(Ville Syrjälä)
- Improve checks for switching between multiple <=> single displays
v7: - Extract sync pipe calculation to separate function(Ville Syrjälä)
- Removed redundant loop over crtc in post ddb call site(Ville Syrjälä)
- Use old_dbuf_state to determine synced pipe when switching to multiple
displays in post ddb call site(Ville Syrjälä)
- Removed num_active_pipes checks and use joined_mbus only(Ville Syrjälä)
- Extracted dbox update change to separate patch(Ville Syrjälä)
- Added handling for the case, when mbus_joined state didn't change
(Ville Syrjälä)
Signed-off-by: Stanislav Lisovskiy <stanislav.lisovskiy at intel.com>
---
drivers/gpu/drm/i915/display/intel_display.c | 15 ++-
drivers/gpu/drm/i915/display/skl_watermark.c | 130 +++++++++++++++----
drivers/gpu/drm/i915/display/skl_watermark.h | 2 +
3 files changed, 123 insertions(+), 24 deletions(-)
diff --git a/drivers/gpu/drm/i915/display/intel_display.c b/drivers/gpu/drm/i915/display/intel_display.c
index b88f214e111ae..6e4b2c941b63e 100644
--- a/drivers/gpu/drm/i915/display/intel_display.c
+++ b/drivers/gpu/drm/i915/display/intel_display.c
@@ -6895,6 +6895,8 @@ static void skl_commit_modeset_enables(struct intel_atomic_state *state)
intel_pre_update_crtc(state, crtc);
}
+ intel_dbuf_mbus_pre_ddb_update(state);
+
while (update_pipes) {
for_each_oldnew_intel_crtc_in_state(state, crtc, old_crtc_state,
new_crtc_state, i) {
@@ -6925,6 +6927,17 @@ static void skl_commit_modeset_enables(struct intel_atomic_state *state)
}
}
+ /*
+ * Some MBUS/DBuf update scenarios(mbus join disable) require that
+ * changes are done _after_ DDB reallocation, but _before_ crtc enabling.
+ * Typically we are disabling resources in post_plane/crtc_enable hooks,
+ * however in that case BSpec explicitly states that this should be done
+ * before we enable additional displays.
+ * FIXME: Should we still call this also there(post_plane hook)
+ * for extra-safety? If so, how to make sure, we don't call it twice?
+ */
+ intel_dbuf_mbus_post_ddb_update(state);
+
update_pipes = modeset_pipes;
/*
@@ -7169,9 +7182,7 @@ static void intel_atomic_commit_tail(struct intel_atomic_state *state)
}
intel_encoders_update_prepare(state);
-
intel_dbuf_pre_plane_update(state);
- intel_mbus_dbox_update(state);
for_each_new_intel_crtc_in_state(state, crtc, new_crtc_state, i) {
if (new_crtc_state->do_async_flip)
diff --git a/drivers/gpu/drm/i915/display/skl_watermark.c b/drivers/gpu/drm/i915/display/skl_watermark.c
index 2207ecd2605c2..783a0f6ca1f71 100644
--- a/drivers/gpu/drm/i915/display/skl_watermark.c
+++ b/drivers/gpu/drm/i915/display/skl_watermark.c
@@ -2636,13 +2636,6 @@ skl_compute_ddb(struct intel_atomic_state *state)
if (ret)
return ret;
- if (old_dbuf_state->joined_mbus != new_dbuf_state->joined_mbus) {
- /* TODO: Implement vblank synchronized MBUS joining changes */
- ret = intel_modeset_all_pipes_late(state, "MBUS joining change");
- if (ret)
- return ret;
- }
-
drm_dbg_kms(&i915->drm,
"Enabled dbuf slices 0x%x -> 0x%x (total dbuf slices 0x%x), mbus joined? %s->%s\n",
old_dbuf_state->enabled_slices,
@@ -3594,30 +3587,59 @@ static void intel_dbuf_mdclk_min_tracker_update(struct intel_atomic_state *state
new_dbuf_state->joined_mbus);
}
+static enum pipe intel_dbuf_get_sync_pipe(const struct intel_dbuf_state *dbuf_state)
+{
+ return ffs(dbuf_state->active_pipes) - 1;
+}
+
+static u32 intel_dbuf_get_pipe_select_mask(struct intel_atomic_state *state, enum pipe sync_pipe)
+{
+ struct drm_i915_private *i915 = to_i915(state->base.dev);
+ struct intel_crtc *crtc;
+ struct intel_crtc_state *new_crtc_state;
+ u32 pipe_select;
+
+ if (sync_pipe == INVALID_PIPE)
+ return MBUS_JOIN_PIPE_SELECT_NONE;
+
+ crtc = intel_crtc_for_pipe(i915, sync_pipe);
+ new_crtc_state = intel_atomic_get_new_crtc_state(state, crtc);
+
+ if (new_crtc_state && !intel_crtc_needs_modeset(new_crtc_state))
+ pipe_select = MBUS_JOIN_PIPE_SELECT(sync_pipe);
+ else
+ pipe_select = MBUS_JOIN_PIPE_SELECT_NONE;
+
+ return pipe_select;
+}
+
/*
* Configure MBUS_CTL and all DBUF_CTL_S of each slice to join_mbus state before
* update the request state of all DBUS slices.
*/
-static void intel_dbuf_mbus_join_update(struct intel_atomic_state *state)
+static void intel_dbuf_mbus_join_update(struct intel_atomic_state *state, enum pipe sync_pipe)
{
struct drm_i915_private *i915 = to_i915(state->base.dev);
u32 mbus_ctl;
const struct intel_dbuf_state *new_dbuf_state =
intel_atomic_get_new_dbuf_state(state);
+ u32 pipe_select;
if (!HAS_MBUS_JOINING(i915))
return;
+ pipe_select = intel_dbuf_get_pipe_select_mask(state, sync_pipe);
+
/*
* TODO: Implement vblank synchronized MBUS joining changes.
* Must be properly coordinated with dbuf reprogramming.
*/
if (new_dbuf_state->joined_mbus)
mbus_ctl = MBUS_HASHING_MODE_1x4 | MBUS_JOIN |
- MBUS_JOIN_PIPE_SELECT_NONE;
+ pipe_select;
else
mbus_ctl = MBUS_HASHING_MODE_2x2 |
- MBUS_JOIN_PIPE_SELECT_NONE;
+ pipe_select;
intel_de_rmw(i915, MBUS_CTL,
MBUS_HASHING_MODE_MASK | MBUS_JOIN |
@@ -3632,19 +3654,18 @@ void intel_dbuf_pre_plane_update(struct intel_atomic_state *state)
const struct intel_dbuf_state *old_dbuf_state =
intel_atomic_get_old_dbuf_state(state);
+ if (new_dbuf_state && old_dbuf_state &&
+ new_dbuf_state->joined_mbus == old_dbuf_state->joined_mbus) {
+ intel_dbuf_mdclk_min_tracker_update(state);
+ intel_mbus_dbox_update(state);
+ }
+
if (!new_dbuf_state ||
- (new_dbuf_state->enabled_slices == old_dbuf_state->enabled_slices &&
- new_dbuf_state->joined_mbus == old_dbuf_state->joined_mbus))
+ (new_dbuf_state->enabled_slices == old_dbuf_state->enabled_slices))
return;
WARN_ON(!new_dbuf_state->base.changed);
- if ((hweight8(new_dbuf_state->active_pipes) <= hweight8(old_dbuf_state->active_pipes))
- || (old_dbuf_state->active_pipes == 0)) {
- intel_dbuf_mbus_join_update(state);
- intel_dbuf_mdclk_min_tracker_update(state);
- }
-
gen9_dbuf_slices_update(i915,
old_dbuf_state->enabled_slices |
new_dbuf_state->enabled_slices);
@@ -3658,6 +3679,23 @@ void intel_dbuf_post_plane_update(struct intel_atomic_state *state)
const struct intel_dbuf_state *old_dbuf_state =
intel_atomic_get_old_dbuf_state(state);
+ if (!new_dbuf_state ||
+ (new_dbuf_state->enabled_slices == old_dbuf_state->enabled_slices))
+ return;
+
+ WARN_ON(!new_dbuf_state->base.changed);
+
+ gen9_dbuf_slices_update(i915,
+ new_dbuf_state->enabled_slices);
+}
+
+void intel_dbuf_mbus_pre_ddb_update(struct intel_atomic_state *state)
+{
+ const struct intel_dbuf_state *new_dbuf_state =
+ intel_atomic_get_new_dbuf_state(state);
+ const struct intel_dbuf_state *old_dbuf_state =
+ intel_atomic_get_old_dbuf_state(state);
+
if (!new_dbuf_state ||
(new_dbuf_state->enabled_slices == old_dbuf_state->enabled_slices &&
new_dbuf_state->joined_mbus == old_dbuf_state->joined_mbus))
@@ -3665,13 +3703,61 @@ void intel_dbuf_post_plane_update(struct intel_atomic_state *state)
WARN_ON(!new_dbuf_state->base.changed);
- if (hweight8(new_dbuf_state->active_pipes) > hweight8(old_dbuf_state->active_pipes)) {
- intel_dbuf_mbus_join_update(state);
+ /*
+ * Switching to single display scenario(enable mbus join).
+ */
+ if (!old_dbuf_state->joined_mbus && new_dbuf_state->joined_mbus) {
+ enum pipe sync_pipe;
+
+ if (new_dbuf_state->active_pipes)
+ sync_pipe = intel_dbuf_get_sync_pipe(new_dbuf_state);
+ else
+ sync_pipe = INVALID_PIPE;
+
+ intel_dbuf_mbus_join_update(state, sync_pipe);
intel_dbuf_mdclk_min_tracker_update(state);
+ intel_mbus_dbox_update(state);
}
+}
- gen9_dbuf_slices_update(i915,
- new_dbuf_state->enabled_slices);
+void intel_dbuf_mbus_post_ddb_update(struct intel_atomic_state *state)
+{
+ struct drm_i915_private *i915 = to_i915(state->base.dev);
+ const struct intel_dbuf_state *new_dbuf_state =
+ intel_atomic_get_new_dbuf_state(state);
+ const struct intel_dbuf_state *old_dbuf_state =
+ intel_atomic_get_old_dbuf_state(state);
+
+ if (!new_dbuf_state ||
+ (new_dbuf_state->enabled_slices == old_dbuf_state->enabled_slices &&
+ new_dbuf_state->joined_mbus == old_dbuf_state->joined_mbus))
+ return;
+
+ WARN_ON(!new_dbuf_state->base.changed);
+
+ /*
+ * Switching to multiple display scenario
+ */
+ if (old_dbuf_state->joined_mbus && !new_dbuf_state->joined_mbus) {
+ enum pipe sync_pipe;
+ struct intel_crtc *crtc;
+ struct intel_crtc_state *new_crtc_state = NULL;
+
+ if (old_dbuf_state->active_pipes) {
+ sync_pipe = intel_dbuf_get_sync_pipe(old_dbuf_state);
+ crtc = intel_crtc_for_pipe(i915, sync_pipe);
+ new_crtc_state = intel_atomic_get_new_crtc_state(state, crtc);
+ } else {
+ sync_pipe = INVALID_PIPE;
+ }
+
+ intel_dbuf_mbus_join_update(state, sync_pipe);
+ intel_dbuf_mdclk_min_tracker_update(state);
+ intel_mbus_dbox_update(state);
+
+ if (new_crtc_state && !intel_crtc_needs_modeset(new_crtc_state))
+ intel_crtc_wait_for_next_vblank(crtc);
+ }
}
static bool xelpdp_is_only_pipe_per_dbuf_bank(enum pipe pipe, u8 active_pipes)
diff --git a/drivers/gpu/drm/i915/display/skl_watermark.h b/drivers/gpu/drm/i915/display/skl_watermark.h
index 3a90741cab06a..f6d38b41e3a6c 100644
--- a/drivers/gpu/drm/i915/display/skl_watermark.h
+++ b/drivers/gpu/drm/i915/display/skl_watermark.h
@@ -77,6 +77,8 @@ int intel_dbuf_state_set_mdclk_cdclk_ratio(struct intel_atomic_state *state, u8
void intel_dbuf_pre_plane_update(struct intel_atomic_state *state);
void intel_dbuf_post_plane_update(struct intel_atomic_state *state);
void intel_dbuf_mdclk_cdclk_ratio_update(struct drm_i915_private *i915, u8 ratio, bool joined_mbus);
+void intel_dbuf_mbus_pre_ddb_update(struct intel_atomic_state *state);
+void intel_dbuf_mbus_post_ddb_update(struct intel_atomic_state *state);
void intel_mbus_dbox_update(struct intel_atomic_state *state);
#endif /* __SKL_WATERMARK_H__ */
--
2.37.3
More information about the Intel-gfx-trybot
mailing list