[Intel-gfx] [ANNOUNCE] xf86-video-intel 2.5.0
Jesse Barnes
jbarnes at virtuousgeek.org
Tue Oct 21 03:25:06 CEST 2008
Well, here it is (finally!). Lots of changes in this release (see below for
the shortlog & download URLs). We planned several things for this release:
1) usable EXA support
2) support for GEM (if supported by the currently running kernel)
3) support for kernel mode setting (again, if the underlying kernel supports
it)
4) no more video tearing with textured video & XvMC
5) Bug fixing
6) removal of XAA code
Item (4) was the main thing we missed this time (Nanhai has been working
flat out to get MPEG2 offload working so we didn't get a chance to try
different approaches for vblank sync'ing). I think the real fix here will
be DRI2, which should allow us to run compositing managers in DRI mode,
with real vblank sync'ing for all their drawing.
Also, I didn't follow through with my threat to remove XAA, even though EXA
improved significantly this time around (especially with post-1.5 X servers).
The blocker list was almost completely cleared out. We still have a few
issues (including a Sony/GM45 related problem we still don't understand), but
overall all our bug fixers deserve a big thank you.
GEM support is looking great now, and is now in upstream Linux, so should be
part of the 2.6.28 release.
Kernel mode setting support is also included, though the kernel bits aren't
queued up yet. Small patches will be needed when it finally lands upstream,
mainly for mapping pixmaps through the GTT for better fallback handling.
This release also includes UXA, a new acceleration architecture Keith put
together specifically for UMA machines. It does its own pixmap management,
but as a result really wants the same sort of GTT mapping interface that we
need for kernel mode setting. I'm hoping to have that fixed up this week
(again this means small patches on top of 2.5.0 to get good performance).
This release requires libdrm 2.4.0 which was recently released, but should
work on both GEM and non-GEM enabled kernels. It should also build & work
against old X servers (theoretically going back to 1.3 I think, but I haven't
tested that configuration recently).
So please pull this release down and give it a try. As usual, report bugs
to bugs.freedesktop.org and use xorg@ and intel-gfx@ for questions and
development discussion.
Thanks,
Jesse
Adam Jackson (2):
Don't touch pScrn->monitor->DDC directly.
Fix Mac mini crash in DDC mode probe
Alan Coopersmith (1):
Man page typo fixes
Bryce Harrington (1):
Add TV out quirk for HP Compaq nx6110
Carl Worth (17):
Move VERTEX_BUFFERS setup from prepare_composite to composite
Allow for multiple vertex buffers (though only use one for now)
Use up to 256 separate vertex buffers
Add intel_statuspage to .gitignore
Add OUT_RELOC macro and backing intel_batch_emit_reloc function
Switch to using a buffer object for the vertex buffer
Eliminate unnecessary flush from i965_composite
Add call to intel_bufmgr_gem_enable_reuse
Call DRM_I915_GEM_THROTTLE from I830BlockHandler
Examine picture repeatType as well as repeat field.
Add support for RepeatPad and RepeatReflect.
Prefer repeatType field over using both repeat and repeatType.
Fallback to software for RepeatNone with transformed RGB-only pictures.
Revert "Fallback to software for RepeatNone with transformed RGB-only pictures."
Rename default_color to border_color
Document and use 'legacy' border color mode
Disable frame buffer compression by default for GM965.
Daniel Stone (1):
i830: Fix timer leak
Dave Airlie (3):
[gem] remove one more unused bit
intel: fix drm check.
mode: fix missing comma
David Schleef (1):
Bug #17277: fix upscaling limit
Eamon Walsh (2):
Remove unused exa_pixmap_key.
Change uxa private keys to integer variables.
Eric Anholt (48):
Add initial GEM hacks to bring the server up.
[gem] Reduce console spam from debugging.
[gem] Note if pinning a buffer fails.
Add a little program to dump out the first 64 dwords of the status page.
Use batchbuffers instead of ring emits for general commands.
Avoid needless flush emits in the blockhandler.
Use the DRM for submitting batchbuffers when available.
Change most usage of pixmap offsets to using a reloc macro.
Use bufmgr_gem when available instead of the fake bufmgr.
[gem] Don't set up the ring in GEM mode, as that'll be handled by the kernel.
[gem] Chase move of create ioctl from generic to device-specific.
Require libdrm 2.4.0 always since we need the bufmgr code.
[gem] Catch -EINTR from blocking GEM ioctl and restart.
Add little hotplug detector app.
Remove VGA regs from debug output.
Add DisplayPort registers.
Initial HDMI work. Not currently hooked up at startup.
The phase shift its are now reserved, and add HDMI clock limits.
Add pixel multiplier support for HDMI
Set the sync active bits like we're supposed to, matching the BIOS.
Get HDMI output working.
Fix hdmi POSTING_READ to use the register number instead of the register value.
Automatically detect the presence of HDMI.
Fix a crash in i830_sdvo_init error paths by setting up dev_priv earlier.
Set tiling state for buffers allocated using GEM.
Fix DSPARB setting on 845/865, which have only the AEND field and 96 entries.
Bump version number past the 2.4 stable branch.
Get prototype for i830_bios_get_tv().
Fix uninitialized-use warning in i830_debug.c ring dumping.
Fix distcheck.
Don't set up the HWS page in GEM mode now that the kernel manages it.
intel-gem: Give a better error message if the kernel rejects the tiling mode.
intel-gem: Use new getparam to detect kernel GEM support.
intel_idle: Instead if #if 0, add an ignore flag for unreliable INSTDONE bits.
Set lvds_ddc_mode before use to avoid a segfault on mac mini.
Add some MCHBAR registers for debugging tile swizzling issues.
Bug #17446: Don't try to manage IRQs in GEM mode.
Track move of bufmgr functions to libdrm_intel.
Track the move of irq emit/wait to fake bufmgr.
Track move of exec to bufmgr, and restoration of emit/wait funcs for non-drm.
Work around libpciaccess reporting a 0 rom size by guessing.
Add support for RepeatPad and RepeatReflect to 915 and 830-class Render accel.
Fix bios_reader build against old servers.
Fix driver build against server 1.4.2.
Add a GTT dumper for G4x debugging.
Fix broken stolen memory counting on G4X.
Remove gratuitous flushing in EXA after solid operations.
Enable Option "Legacy3D" for 965 as well, and clarify both the docs and code.
Fabio (1):
Man page patch to clarify meaning of VideoRam option with i810/i815
Hong Liu (1):
Fix SDVO HDMI output.
Jesse Barnes (60):
Add support for keeping vblank counters sane across mode setting
Fix back buffer damage handler for 965+ chips
Remove ErrorF debugging from modeset ioctl
Add pipe a force enable quirk for Lenovo T60
Add pipea force enable quirk for HP Pavilion ze4944ea
Improve FBC size checking
Improve VBIOS feature detection, add SSC support
Add VBIOS based TV connector detection
Don't disable pipe A on 855 chips
Choose a split for DSPARB based on the configured modes for both planes.
Add no LVDS quirk for Transtec Senyo 610 mini PC
Update DSPARB while planes are still off
Update man page
Reorganize VBIOS code
Revert "Switch to using a buffer object for the vertex buffer"
Initial port of kernel modesetting from old intel-kernelmode branch
Make it actually build the kernel stuff if possible
Add EXA pixmap management functions for kernel mode setting
Update DRM based modesetting support
Don't wait for ring if kernel mode setting is active
Don't run old accel init code
Don't set tiling (yet) if kernel mode setting is active
Map gen4 render state buffer before initializing
Make EXA & UXA share bo getting function
Use pwrite for cursor updates
Fixup AccelMethod kernel mode setting code
Map/unmap render state only when bo is available
Fix pipe A force quirk
Remove last TTM bits
Pack bdb_general_definitions block
Remove unused VBIOS flag defines
Add VBIOS software flags dumper program
Add quirk for pre-915s with working PFIT regs
Bail out if kernel mode setting is active but DRI fails
Don't allocate EXA offscreen space if kernel mode setting is active
Use GTT mapping for EXA PrepareAccess function
Add swf_dumper to .gitignore
Add more panel debugging info to register dump & vbios reader
Don't allocate a pipe for hotplug detection
Don't disable planes in i830_update_dsparb
Fix compiler warnings in VBIOS utils
Hide kernel mode setting EXA code behind XF86DRM_MODE
Update version to post-2.5
Update version to 2.4.97 for first 2.5 test release
Fix UXA build for distcheck
Fix UXA build for distcheck
Fix build when using kernel DRM headers
Only BO map render state if kernel mode setting is active
Add Cappuccino SlimPRO SP625F to no LVDS quirks list
Add no TV out quirk for HP Compaq nx6110
Revert "Add no TV out quirk for HP Compaq nx6110"
Update supported hardware list
Work around gcc uninitialized variable warnings
Use -Werror by default
Use VBT LFP info pointers by default
Be more verbose about panel data in VBIOS dumper
Revert "Use -Werror by default"
Document more VBIOS functionality
Update version to 2.4.98 for 2.5.0 release candidate
Bump version to 2.5.0 for release
Julien Cristau (6):
Fix gen4asm rule to work with a build dir
Link the driver with -lpciaccess and -ldrm if needed
Link with -lm for sin/cos
Fix up the HP Pavilion ze4944ea quirk
Don't skip the checks for DRI headers with --enable-dri
Typo fix
Keith Packard (31):
Set pin alignment for gem on non-965
Use GEM for buffer naming now.
Fix up ring dumping code for non-i965
Move a declaration under #ifndef HAVE_FREE_SHADOW
Record alignment requirements in mem structure for use by GEM.
Track name changes in GEM ioctls.
Add check for GEM, use that to enable driver GEM support
Remove some unreliable regs for i915
Flush pending batch in block handler
Add UXA - the unified memory acceleration architecture.
Make EXA functions work for UXA as well
Don't call sync on prepare_access -- just let the driver deal with it.
Use dri_bo for all object allocations, including pixmaps under uxa
Add throttling
Add batch flush in i830_uxa_prepare_access
Change PrepareAccess to take access mode rather than index
Rename uxa using _ instead of caps
Use EXA by default instead of UXA until we have GTT mapping
[uxa] Check xalloc returns and deal with failure
[uxa] Remove unused pixmap size limits.
Use uintptr_t instead of uint64_t to hold pointer value
Eliminate INT10 call to get BIOS contents
i830 nondrm batch buffer insertion was missing ADVANCE_LP_RING() call
For non-DRM, add NOOPs after BATCH_BUFFER_START to verify completion
XAA tiling support was mis-computing adjusted pitch (>>4 instead of >>2)
Handle differently tiled front/back/depth/third in DRI window management
Check for DRI module before initializing GEM mm
Remove accidental 'return;' left at the top of I830DRIInitBuffers
No need to check for drmCommandWriteRead; we link against libdrm
Reduce incidence of MI_FLUSH usage.
Use pipes, not planes for sarea geometry data
Lukas Hejtmanek (1):
Fix driver build against server master.
Olivier Fourdan (3):
Apply pipe A quirk to 845 as well.
Fix DPMS off in the presence of the pipe A quirk.
Fix ordering of VGA vs. plane disable
Robert Noland (2):
Check for drm before calling modeset ioctl.
Fix typo in last commit
Roland Test-tools Bär (1):
i810: Remove an effectively unused variable (only used in an incorrect free())
Shaohua Li (1):
avoid duplicate mode set in lvds
Shuang He (1):
Fix a typo in G965 texture video code
Stefan Dirsch (2):
Add pipea force enable quirk for another 855GM machine.
Pipe A force quirk for Toshiba Satellite A30.
Tomas Carnecky (1):
Reorder visuals reported by the intel driver
Xiang, Haihao (4):
Put back check for pI830->hw_status in setting hws in non-GEM mode.
Move bufmgr init earlier so it's available at I830DRIDoMappings time.
Put back check for pI830->hw_status in setting hws in non-GEM mode.
Move bufmgr init earlier so it's available at I830DRIDoMappings time.
Zhenyu Wang (48):
Add support for Intel 4 series chipsets.
Add backlight kernel method support on Asus and Eeepc
xvmc: formalize surface type definition
xvmc: environ debug option support
xvmc: init one-time mc context once
xvmc: init dest and reference buffer once
xvmc: init mc render load indirect command once
xvmc: only allocate memory requiring physical address on 915G
xvmc: enlarge batch buffer size
xvmc: Don't copy on xvmc surface in PutImage
xvmc: fix motion_type dump for frame/field picture
Fix SDVOC typo
Give asus and eeepc backlight method higher priority
Fix official name for GM45 chipset
move FBC register dump out of display registers
xvmc: use vector based structure
Only initialize integrated TV encoder for mobile chips
Thinkpad R60e TV quirk via DMI info
Check underrun on enabled pipe
SSC is LVDS only
only check pipe underrun if vtSema is true.
Bug #16801: fix X crash when NoAccel on 965
Fix HDMI output number
Fix distcheck for clean doltcompile
shut up gcc warning
Don't program dsparb on new Intel chip
Fix SDVO reg definition
Fix SDVO HDMI encoding detect (#16920)
Disable display clock gating for 4 series chips
Fix possible spurious interrupts in hotplug detect on 4 series chip
Make skip_panel_detect clear for its meaning
Always check and free driver private in LVDS destroy
Fix reverted LVDS bios capability dword definition
Destroy bufmgr after allocation finish
Fix X exit crash in NoAccel
Disable render standby
Add support for G41 chipset
Check display stride limit when allocate front buffer
Fix output detection for DVI-I
Bug #16515: Fix VT switch with DVI on G45
Do force CRT detect sequence twice on 4 series chipset
Render register clock gating disable fix on 4 series chipset
Bug #16631: add option for SDVO force detect
Put forware VBIOS data parsing
Remove Lenovo T61 TV quirk
Bug #17892: Fix possible crash in CRT probe
Make GTT dumper work on other 9XX chips
Don't handle irq in GEM mode
Zou Nan hai (1):
Fix from He Shuang(shuang.he at intel.com),
lipeng (1):
Fix GPIO pin usage for DDC on second HDMI port.
git tag: xf86-video-intel-2.5.0
http://xorg.freedesktop.org/archive/individual/driver/xf86-video-intel-2.5.0.tar.bz2
MD5: 462f205bd47766265246cc39801b75e7 xf86-video-intel-2.5.0.tar.bz2
SHA1: 081709117a665af9d9f0339b58a298b8a7c786f8 xf86-video-intel-2.5.0.tar.bz2
http://xorg.freedesktop.org/archive/individual/driver/xf86-video-intel-2.5.0.tar.gz
MD5: 3d5f44ee1d60cfa88881a18c81c766c3 xf86-video-intel-2.5.0.tar.gz
SHA1: e5eec7e2ad72ff4333d38de56dd4b46dbec6f51d xf86-video-intel-2.5.0.tar.gz
More information about the Intel-gfx
mailing list