[Intel-gfx] [PATCH 2/2] drm/i915: Check and update LVDS connector status after receiving LID notification event

[yakui.zhao at intel.com]

From: Zhao Yakui <yakui.zhao at intel.com>

Dirk reports that nothing is displayed on LVDS when using ubuntu 9.1 after
close/reopen the LID. And I also reproduce this issue on another laptop.
After some tests and debug, it seems that it is related with that the
LVDS status is not updated in time in course of suspend/resume.

Now the LID state is used to check whether the LVDS is connected or
disconnected. And when the LID is closed, it means that the LVDS is
disconnected. When it is reopened, it means that the LVDS is connected.
At the same time on some distributions the LID event is also used to put
the system into suspend state. When the LID is closed, the system will enter
the suspend state. When the LID is reopened, the system will be resumed.

In such case when the LID is closed, user-space script will receive the LID
notification event and  detect the LVDS as disconnected. Then the system will
enter the suspended state. When the LID is reopened, the system will be
resumed. As the LVDS status is not updated in course of resume, it will cause
that the LVDS connector is marked as unused and disabled. After the resume is
finished,user-space script will try to configure the display mode for LVDS.
But unfortunately as the LVDS status is not updated in time and it is still
marked as disconnected, the LVDS and its corresponding CRTC will be disabled
again in the function of drm_helper_disable_unused_functions after changing
mode for LVDS.

So we had better check and update the status of LVDS connector after receiving
the LID notication event. Then after the system is resumed from suspended
state, we can set the display mode for LVDS correctly.

Signed-off-by: Zhao Yakui <yakui.zhao at intel.com>
Reported-by:  Dirk Hohndel <hohndel at infradead.org>
Review-by: Jesse Barnes <jbarnes at virtuousgeek.org>
---
 drivers/gpu/drm/i915/i915_drv.h   |    1 +
 drivers/gpu/drm/i915/intel_lvds.c |    9 +++++++++
 2 files changed, 10 insertions(+), 0 deletions(-)

diff --git a/drivers/gpu/drm/i915/i915_drv.h b/drivers/gpu/drm/i915/i915_drv.h
index 1d61710..5cc53cc 100644
--- a/drivers/gpu/drm/i915/i915_drv.h
+++ b/drivers/gpu/drm/i915/i915_drv.h
@@ -549,6 +549,7 @@ typedef struct drm_i915_private {
 	u16 orig_clock;
 	int child_dev_num;
 	struct child_device_config *child_dev;
+	struct drm_connector *int_lvds_connector;
 } drm_i915_private_t;
 
 /** driver private structure attached to each drm_gem_object */
diff --git a/drivers/gpu/drm/i915/intel_lvds.c b/drivers/gpu/drm/i915/intel_lvds.c
index a240f1f..2eba806 100644
--- a/drivers/gpu/drm/i915/intel_lvds.c
+++ b/drivers/gpu/drm/i915/intel_lvds.c
@@ -686,7 +686,14 @@ static int intel_lid_notify(struct notifier_block *nb, unsigned long val,
 	struct drm_i915_private *dev_priv =
 		container_of(nb, struct drm_i915_private, lid_notifier);
 	struct drm_device *dev = dev_priv->dev;
+	struct drm_connector *connector = dev_priv->int_lvds_connector;
 
+	/*
+	 * check and update the status of LVDS connector after receiving
+	 * the LID nofication event.
+	 */
+	if (connector)
+		connector->status = connector->funcs->detect(connector);
 	if (!acpi_lid_open()) {
 		dev_priv->modeset_on_lid = 1;
 		return NOTIFY_OK;
@@ -1187,6 +1194,8 @@ out:
 		DRM_DEBUG_KMS("lid notifier registration failed\n");
 		dev_priv->lid_notifier.notifier_call = NULL;
 	}
+	/* keep the LVDS connector */
+	dev_priv->int_lvds_connector = connector;
 	drm_sysfs_connector_add(connector);
 	return;
 
-- 
1.5.4.5