[Intel-gfx] [PATCH 1/4] DRM: Remove the unused prefix in DRM_DEBUG_KMS/DRIVER/MODE
yakui.zhao at intel.com
yakui.zhao at intel.com
Thu Jul 16 09:06:19 CEST 2009
From: Zhao Yakui <yakui.zhao at intel.com>
We will have to add a prefix when using the macro defintion of DRM_DEBUG_KMS
/DRM_DEBUG_DRIVER/MODE. It is not convenient. We should use the DRM_NAME
as default prefix.
So remove the prefix in the macro definition of DRM_DEBUG_KMS/DRIVER/MODE.
Signed-off-by: Zhao Yakui <yakui.zhao at intel.com>
---
drivers/gpu/drm/drm_modes.c | 8 +++-----
drivers/gpu/drm/i915/i915_dma.c | 35 +++++++++++++++--------------------
drivers/gpu/drm/i915/intel_lvds.c | 10 +++-------
drivers/gpu/drm/i915/intel_sdvo.c | 31 ++++++++++++++-----------------
include/drm/drmP.h | 18 +++++++++---------
5 files changed, 44 insertions(+), 58 deletions(-)
Index: linux-2.6/include/drm/drmP.h
===================================================================
--- linux-2.6.orig/include/drm/drmP.h 2009-07-16 13:53:24.000000000 +0800
+++ linux-2.6/include/drm/drmP.h 2009-07-16 13:53:38.000000000 +0800
@@ -174,19 +174,19 @@
__func__, fmt, ##args); \
} while (0)
-#define DRM_DEBUG_DRIVER(prefix, fmt, args...) \
+#define DRM_DEBUG_DRIVER(fmt, args...) \
do { \
- drm_ut_debug_printk(DRM_UT_DRIVER, prefix, \
+ drm_ut_debug_printk(DRM_UT_DRIVER, DRM_NAME, \
__func__, fmt, ##args); \
} while (0)
-#define DRM_DEBUG_KMS(prefix, fmt, args...) \
+#define DRM_DEBUG_KMS(fmt, args...) \
do { \
- drm_ut_debug_printk(DRM_UT_KMS, prefix, \
+ drm_ut_debug_printk(DRM_UT_KMS, DRM_NAME, \
__func__, fmt, ##args); \
} while (0)
-#define DRM_DEBUG_MODE(prefix, fmt, args...) \
+#define DRM_DEBUG_MODE(fmt, args...) \
do { \
- drm_ut_debug_printk(DRM_UT_MODE, prefix, \
+ drm_ut_debug_printk(DRM_UT_MODE, DRM_NAME, \
__func__, fmt, ##args); \
} while (0)
#define DRM_LOG(fmt, args...) \
@@ -210,9 +210,9 @@
NULL, fmt, ##args); \
} while (0)
#else
-#define DRM_DEBUG_DRIVER(prefix, fmt, args...) do { } while (0)
-#define DRM_DEBUG_KMS(prefix, fmt, args...) do { } while (0)
-#define DRM_DEBUG_MODE(prefix, fmt, args...) do { } while (0)
+#define DRM_DEBUG_DRIVER(fmt, args...) do { } while (0)
+#define DRM_DEBUG_KMS(fmt, args...) do { } while (0)
+#define DRM_DEBUG_MODE(fmt, args...) do { } while (0)
#define DRM_DEBUG(fmt, arg...) do { } while (0)
#define DRM_LOG(fmt, arg...) do { } while (0)
#define DRM_LOG_KMS(fmt, args...) do { } while (0)
Index: linux-2.6/drivers/gpu/drm/drm_modes.c
===================================================================
--- linux-2.6.orig/drivers/gpu/drm/drm_modes.c 2009-07-16 13:53:24.000000000 +0800
+++ linux-2.6/drivers/gpu/drm/drm_modes.c 2009-07-16 13:53:38.000000000 +0800
@@ -38,7 +38,6 @@
#include "drm.h"
#include "drm_crtc.h"
-#define DRM_MODESET_DEBUG "drm_mode"
/**
* drm_mode_debug_printmodeline - debug print a mode
* @dev: DRM device
@@ -51,8 +50,8 @@
*/
void drm_mode_debug_printmodeline(struct drm_display_mode *mode)
{
- DRM_DEBUG_MODE(DRM_MODESET_DEBUG,
- "Modeline %d:\"%s\" %d %d %d %d %d %d %d %d %d %d 0x%x 0x%x\n",
+ DRM_DEBUG_MODE("Modeline %d:\"%s\" %d %d %d %d %d %d %d %d %d %d "
+ "0x%x 0x%x\n",
mode->base.id, mode->name, mode->vrefresh, mode->clock,
mode->hdisplay, mode->hsync_start,
mode->hsync_end, mode->htotal,
@@ -403,8 +402,7 @@
list_del(&mode->head);
if (verbose) {
drm_mode_debug_printmodeline(mode);
- DRM_DEBUG_MODE(DRM_MODESET_DEBUG,
- "Not using %s mode %d\n",
+ DRM_DEBUG_MODE("Not using %s mode %d\n",
mode->name, mode->status);
}
drm_mode_destroy(dev, mode);
Index: linux-2.6/drivers/gpu/drm/i915/i915_dma.c
===================================================================
--- linux-2.6.orig/drivers/gpu/drm/i915/i915_dma.c 2009-07-16 13:53:24.000000000 +0800
+++ linux-2.6/drivers/gpu/drm/i915/i915_dma.c 2009-07-16 13:53:38.000000000 +0800
@@ -33,8 +33,6 @@
#include "i915_drm.h"
#include "i915_drv.h"
-#define I915_DRV "i915_drv"
-
/* Really want an OS-independent resettable timer. Would like to have
* this loop run for (eg) 3 sec, but have the timer reset every time
* the head pointer changes, so that EBUSY only happens if the ring
@@ -101,7 +99,7 @@
memset(dev_priv->hw_status_page, 0, PAGE_SIZE);
I915_WRITE(HWS_PGA, dev_priv->dma_status_page);
- DRM_DEBUG_DRIVER(I915_DRV, "Enabled hardware status page\n");
+ DRM_DEBUG_DRIVER("Enabled hardware status page\n");
return 0;
}
@@ -187,8 +185,7 @@
master_priv->sarea_priv = (drm_i915_sarea_t *)
((u8 *)master_priv->sarea->handle + init->sarea_priv_offset);
} else {
- DRM_DEBUG_DRIVER(I915_DRV,
- "sarea not found assuming DRI2 userspace\n");
+ DRM_DEBUG_DRIVER("sarea not found assuming DRI2 userspace\n");
}
if (init->ring_size != 0) {
@@ -238,7 +235,7 @@
{
drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private;
- DRM_DEBUG_DRIVER(I915_DRV, "%s\n", __func__);
+ DRM_DEBUG_DRIVER("%s\n", __func__);
if (dev_priv->ring.map.handle == NULL) {
DRM_ERROR("can not ioremap virtual address for"
@@ -251,14 +248,14 @@
DRM_ERROR("Can not find hardware status page\n");
return -EINVAL;
}
- DRM_DEBUG_DRIVER(I915_DRV, "hw status page @ %p\n",
+ DRM_DEBUG_DRIVER("hw status page @ %p\n",
dev_priv->hw_status_page);
if (dev_priv->status_gfx_addr != 0)
I915_WRITE(HWS_PGA, dev_priv->status_gfx_addr);
else
I915_WRITE(HWS_PGA, dev_priv->dma_status_page);
- DRM_DEBUG_DRIVER(I915_DRV, "Enabled hardware status page\n");
+ DRM_DEBUG_DRIVER("Enabled hardware status page\n");
return 0;
}
@@ -552,7 +549,7 @@
if (!master_priv->sarea_priv)
return -EINVAL;
- DRM_DEBUG_DRIVER(I915_DRV, "%s: page=%d pfCurrentPage=%d\n",
+ DRM_DEBUG_DRIVER("%s: page=%d pfCurrentPage=%d\n",
__func__,
dev_priv->current_page,
master_priv->sarea_priv->pf_current_page);
@@ -633,8 +630,7 @@
return -EINVAL;
}
- DRM_DEBUG_DRIVER(I915_DRV,
- "i915 batchbuffer, start %x used %d cliprects %d\n",
+ DRM_DEBUG_DRIVER("i915 batchbuffer, start %x used %d cliprects %d\n",
batch->start, batch->used, batch->num_cliprects);
RING_LOCK_TEST_WITH_RETURN(dev, file_priv);
@@ -681,8 +677,7 @@
void *batch_data;
int ret;
- DRM_DEBUG_DRIVER(I915_DRV,
- "i915 cmdbuffer, buf %p sz %d cliprects %d\n",
+ DRM_DEBUG_DRIVER("i915 cmdbuffer, buf %p sz %d cliprects %d\n",
cmdbuf->buf, cmdbuf->sz, cmdbuf->num_cliprects);
RING_LOCK_TEST_WITH_RETURN(dev, file_priv);
@@ -735,7 +730,7 @@
{
int ret;
- DRM_DEBUG_DRIVER(I915_DRV, "%s\n", __func__);
+ DRM_DEBUG_DRIVER("%s\n", __func__);
RING_LOCK_TEST_WITH_RETURN(dev, file_priv);
@@ -778,7 +773,7 @@
value = dev_priv->num_fence_regs - dev_priv->fence_reg_start;
break;
default:
- DRM_DEBUG_DRIVER(I915_DRV, "Unknown parameter %d\n",
+ DRM_DEBUG_DRIVER("Unknown parameter %d\n",
param->param);
return -EINVAL;
}
@@ -819,7 +814,7 @@
dev_priv->fence_reg_start = param->value;
break;
default:
- DRM_DEBUG_DRIVER(I915_DRV, "unknown parameter %d\n",
+ DRM_DEBUG_DRIVER("unknown parameter %d\n",
param->param);
return -EINVAL;
}
@@ -846,7 +841,7 @@
return 0;
}
- DRM_DEBUG("set status page addr 0x%08x\n", (u32)hws->addr);
+ DRM_DEBUG_DRIVER("set status page addr 0x%08x\n", (u32)hws->addr);
dev_priv->status_gfx_addr = hws->addr & (0x1ffff<<12);
@@ -868,9 +863,9 @@
memset(dev_priv->hw_status_page, 0, PAGE_SIZE);
I915_WRITE(HWS_PGA, dev_priv->status_gfx_addr);
- DRM_DEBUG_DRIVER(I915_DRV, "load hws HWS_PGA with gfx mem 0x%x\n",
+ DRM_DEBUG_DRIVER("load hws HWS_PGA with gfx mem 0x%x\n",
dev_priv->status_gfx_addr);
- DRM_DEBUG_DRIVER(I915_DRV, "load hws at %p\n",
+ DRM_DEBUG_DRIVER("load hws at %p\n",
dev_priv->hw_status_page);
return 0;
}
@@ -1310,7 +1305,7 @@
{
struct drm_i915_file_private *i915_file_priv;
- DRM_DEBUG_DRIVER(I915_DRV, "\n");
+ DRM_DEBUG_DRIVER("\n");
i915_file_priv = (struct drm_i915_file_private *)
kmalloc(sizeof(*i915_file_priv), GFP_KERNEL);
Index: linux-2.6/drivers/gpu/drm/i915/intel_lvds.c
===================================================================
--- linux-2.6.orig/drivers/gpu/drm/i915/intel_lvds.c 2009-07-16 13:53:24.000000000 +0800
+++ linux-2.6/drivers/gpu/drm/i915/intel_lvds.c 2009-07-16 13:53:38.000000000 +0800
@@ -38,8 +38,6 @@
#include "i915_drv.h"
#include <linux/acpi.h>
-#define I915_LVDS "i915_lvds"
-
/*
* the following four scaling options are defined.
* #define DRM_MODE_SCALE_NON_GPU 0
@@ -673,8 +671,7 @@
struct drm_crtc *crtc = connector->encoder->crtc;
struct intel_lvds_priv *lvds_priv = intel_output->dev_priv;
if (value == DRM_MODE_SCALE_NON_GPU) {
- DRM_DEBUG_KMS(I915_LVDS,
- "non_GPU property is unsupported\n");
+ DRM_DEBUG_KMS("non_GPU property is unsupported\n");
return 0;
}
if (lvds_priv->fitting_mode == value) {
@@ -731,8 +728,7 @@
static int __init intel_no_lvds_dmi_callback(const struct dmi_system_id *id)
{
- DRM_DEBUG_KMS(I915_LVDS,
- "Skipping LVDS initialization for %s\n", id->ident);
+ DRM_DEBUG_KMS("Skipping LVDS initialization for %s\n", id->ident);
return 1;
}
@@ -1021,7 +1017,7 @@
return;
failed:
- DRM_DEBUG_KMS(I915_LVDS, "No LVDS modes found, disabling.\n");
+ DRM_DEBUG_KMS("No LVDS modes found, disabling.\n");
if (intel_output->ddc_bus)
intel_i2c_destroy(intel_output->ddc_bus);
drm_connector_cleanup(connector);
Index: linux-2.6/drivers/gpu/drm/i915/intel_sdvo.c
===================================================================
--- linux-2.6.orig/drivers/gpu/drm/i915/intel_sdvo.c 2009-07-16 13:53:24.000000000 +0800
+++ linux-2.6/drivers/gpu/drm/i915/intel_sdvo.c 2009-07-16 14:29:00.000000000 +0800
@@ -36,7 +36,6 @@
#include "intel_sdvo_regs.h"
#undef SDVO_DEBUG
-#define I915_SDVO "i915_sdvo"
struct intel_sdvo_priv {
u8 slave_addr;
@@ -178,7 +177,7 @@
return true;
}
- DRM_DEBUG("i2c transfer returned %d\n", ret);
+ DRM_DEBUG_KMS("i2c transfer returned %d\n", ret);
return false;
}
@@ -288,7 +287,7 @@
struct intel_sdvo_priv *sdvo_priv = intel_output->dev_priv;
int i;
- DRM_DEBUG_KMS(I915_SDVO, "%s: W: %02X ",
+ DRM_DEBUG_KMS("%s: W: %02X ",
SDVO_NAME(sdvo_priv), cmd);
for (i = 0; i < args_len; i++)
DRM_LOG_KMS("%02X ", ((u8 *)args)[i]);
@@ -341,7 +340,7 @@
struct intel_sdvo_priv *sdvo_priv = intel_output->dev_priv;
int i;
- DRM_DEBUG_KMS(I915_SDVO, "%s: R: ", SDVO_NAME(sdvo_priv));
+ DRM_DEBUG_KMS("%s: R: ", SDVO_NAME(sdvo_priv));
for (i = 0; i < response_len; i++)
DRM_LOG_KMS("%02X ", ((u8 *)response)[i]);
for (; i < 8; i++)
@@ -658,10 +657,10 @@
status = intel_sdvo_read_response(intel_output, &response, 1);
if (status != SDVO_CMD_STATUS_SUCCESS) {
- DRM_DEBUG("Couldn't get SDVO clock rate multiplier\n");
+ DRM_DEBUG_KMS("Couldn't get SDVO clock rate multiplier\n");
return SDVO_CLOCK_RATE_MULT_1X;
} else {
- DRM_DEBUG("Current clock rate multiplier: %d\n", response);
+ DRM_DEBUG_KMS("Current clock rate multiplier: %d\n", response);
}
return response;
@@ -942,14 +941,14 @@
format = &sdvo_priv->tv_format;
memset(&unset, 0, sizeof(unset));
if (memcmp(format, &unset, sizeof(*format))) {
- DRM_DEBUG("%s: Choosing default TV format of NTSC-M\n",
+ DRM_DEBUG_KMS("%s: Choosing default TV format of NTSC-M\n",
SDVO_NAME(sdvo_priv));
format->ntsc_m = 1;
intel_sdvo_write_cmd(output, SDVO_CMD_SET_TV_FORMAT, format,
sizeof(*format));
status = intel_sdvo_read_response(output, NULL, 0);
if (status != SDVO_CMD_STATUS_SUCCESS)
- DRM_DEBUG("%s: Failed to set TV format\n",
+ DRM_DEBUG_KMS("%s: Failed to set TV format\n",
SDVO_NAME(sdvo_priv));
}
}
@@ -1220,8 +1219,8 @@
* a given it the status is a success, we succeeded.
*/
if (status == SDVO_CMD_STATUS_SUCCESS && !input1) {
- DRM_DEBUG("First %s output reported failure to sync\n",
- SDVO_NAME(sdvo_priv));
+ DRM_DEBUG_KMS("First %s output reported failure to "
+ "sync\n", SDVO_NAME(sdvo_priv));
}
if (0)
@@ -1316,8 +1315,8 @@
intel_wait_for_vblank(dev);
status = intel_sdvo_get_trained_inputs(intel_output, &input1, &input2);
if (status == SDVO_CMD_STATUS_SUCCESS && !input1)
- DRM_DEBUG("First %s output reported failure to sync\n",
- SDVO_NAME(sdvo_priv));
+ DRM_DEBUG_KMS("First %s output reported failure to "
+ "sync\n", SDVO_NAME(sdvo_priv));
}
intel_sdvo_set_active_outputs(intel_output, sdvo_priv->save_active_outputs);
@@ -1395,7 +1394,7 @@
u8 response[2];
u8 status;
struct intel_output *intel_output;
- DRM_DEBUG("\n");
+ DRM_DEBUG_KMS("\n");
if (!connector)
return 0;
@@ -1460,7 +1459,7 @@
intel_sdvo_write_cmd(intel_output, SDVO_CMD_GET_ATTACHED_DISPLAYS, NULL, 0);
status = intel_sdvo_read_response(intel_output, &response, 2);
- DRM_DEBUG("SDVO response %d %d\n", response[0], response[1]);
+ DRM_DEBUG_KMS("SDVO response %d %d\n", response[0], response[1]);
if (status != SDVO_CMD_STATUS_SUCCESS)
return connector_status_unknown;
@@ -1905,8 +1904,7 @@
/* Read the regs to test if we can talk to the device */
for (i = 0; i < 0x40; i++) {
if (!intel_sdvo_read_byte(intel_output, i, &ch[i])) {
- DRM_DEBUG_KMS(I915_SDVO,
- "No SDVO device found on SDVO%c\n",
+ DRM_DEBUG_KMS("No SDVO device found on SDVO%c\n",
output_device == SDVOB ? 'B' : 'C');
goto err_i2c;
}
@@ -1989,8 +1987,7 @@
sdvo_priv->controlled_output = 0;
memcpy (bytes, &sdvo_priv->caps.output_flags, 2);
- DRM_DEBUG_KMS(I915_SDVO,
- "%s: Unknown SDVO output type (0x%02x%02x)\n",
+ DRM_DEBUG_KMS("%s: Unknown SDVO output type (0x%02x%02x)\n",
SDVO_NAME(sdvo_priv),
bytes[0], bytes[1]);
encoder_type = DRM_MODE_ENCODER_NONE;
@@ -2022,7 +2019,7 @@
&sdvo_priv->pixel_clock_max);
- DRM_DEBUG_KMS(I915_SDVO, "%s device VID/DID: %02X:%02X.%02X, "
+ DRM_DEBUG_KMS("%s device VID/DID: %02X:%02X.%02X, "
"clock range %dMHz - %dMHz, "
"input 1: %c, input 2: %c, "
"output 1: %c, output 2: %c\n",
More information about the Intel-gfx
mailing list