[Intel-gfx] Intel Express 4500MHD GFX resolution not correct on HP Compaq 2230s

Wed Jul 29 13:21:24 CEST 2009

 Well this is very odd....

I installed Gnome2 and the menus and panels all seem to be the correct size??

Not sure if this is a bug with KDE4 or the driver but definitely there is some weird behavior with this system!

For the menus and panels coming up in 1024x764 mode on KDE4 even though underlying config says otherwise and even video working properly is just odd!!!

Don't know if anyone has anything to suggest???

Kaya

-----Original Message-----
From: samankaya at netscape.net
To: intel-gfx at lists.freedesktop.org
Sent: Wed, Jul 29, 2009 11:30 am
Subject: [Intel-gfx] Intel Express 4500MHD GFX resolution not correct on HP Compaq 2230s

Hi,

can anyone help me with video resolution issues??

Yesterday I bought an HP Compaq 2230s laptop with a Mobile Intel® Graphics Media Accelerator 4500 MHD chip inside it only for some reason I am getting 1024x768 resolution super imposed onto my 1280x800 capable widescreen.

I used to have the same issue with my other laptop, an older Intel 855G chipset but now as the GFX driver has got better so has the resolution.

The strange part with my HP is that everything tells me that the system is running in 1280x800 mode only I can tell it's not as text and windows are far wider then usual and in a direct comparison with my older laptop running at 1280x800 res the HP looks stretched and fonts are large. Actually the immediate tell tale sign was from the KDE4 Konsole window as I have 81 width=2
0on my older laptop and I manage to get 2 terminal windows side by side when now the Konsole of the same width takes up 2/3s of the screen....

I am running Kubuntu 9.04 64 bit on it with the Xorg-xserver-intel driver installed as default.

I managed to set the correct resolution twice so far by powering up into init level 1 (single user mode or recovery mode) then running: dpkg-reconfigure xserver-xorg 

However every time I logged out, restarted or shut down at that point the machine reset back to 1024x768 over 1200x800 widescreen.

This is driving me nuts=2
0as I can't run things properly as they don't have the correct dimensions!!

my lspci shows this:

00:00.0 Host bridge: Intel Corporation Mobile 4 Series Chipset Memory Controller Hub (rev 07)

00:02.0 VGA compatible controller: Intel Corporation Mobile 4 Series Chipset Integrated Graphics Controller (rev 07)

00:02.1 Display controller: Intel Corporation Mobile 4 Series Chipset Integrated Graphics Controller (rev 07)

00:1a.0 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #4 (rev 03)

00:1a.1 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #5 (rev 03)

00:1a.2 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #6 (rev 03)

00:1a.7 USB Controller: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #2 (rev 03)

00:1b.0 Audio device: Intel Corporation 82801I (ICH9 Family) HD Audio Controller (rev 03)

00:1c.0 PCI bridge: Intel Corporation 82801I
 (ICH9 Family) PCI Express Port 1 (rev 03)

00:1c.1 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 2 (rev 03)

00:1c.2 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 3 (rev 03)

00:1c.4 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 5 (rev 03)

00:1c.5 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 6 (rev 03)

00:1d.0 USB Controller:20Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #1 (rev 03)

00:1d.1 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #2 (rev 03)

00:1d.2 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #3 (rev 03)

00:1d.7 USB Controller: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #1 (rev 03)

00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev 93)

00:1f.0 ISA bridge: Intel Corporation ICH9M LPC Interface Controller (rev 03)

00:1f.2 SATA controller: Intel Corporation ICH9M/M-E SATA AHCI Controller (rev 03)

02:00.0 Network controller: Intel Corporation PRO/Wireless 5100 AGN [Shiloh] Network Connection

85:00.0 Ethernet controller: Marvell Technology Group Ltd. Device 436c (rev 10)

I have also managed to find these ilnks:

http://intellinuxgraphics.org/download.html

http://intellinuxgraphics.org/install.html

but I don't know if these are the right drivers for my chipset/gpu or even how to download them as I have downloaded git and git-source but have no idea how to use it. (yes I ran man git)

If anyone c
an help me I'd be so grateful.....

Many thanks

Kaya

Hot Deals at Dell on Popular Laptops perfect for Back to School 

_______________________________________________
Intel-gfx mailing list
Intel-gfx at lists.freedesktop.org
http://lists.freedesktop.org/mailman/listinfo/intel-gfx

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.freedesktop.org/archives/intel-gfx/attachments/20090729/557dfdea/attachment.html>