[Intel-gfx] [PATCH] drm/i915: Avoid NULL dereference with component_only tv_modes

[Chris Wilson]

In commit d2d9f2324, the guard for a valid video mode was removed. This
caused the regression:

  kernel crash during kms graphic boot on Intel GM4500 platform
  http://bugzilla.kernel.org/show_bug.cgi?id=14627

This patches changes the logic slightly not to rely on a coupled
variable, but to just check whether the video_modes is valid before
dereferencing.

Signed-off-by: Chris Wilson <chris at chris-wilson.co.uk>
Cc: David Woodhouse <dwmw2 at infradead.org>
Cc: Zhenyu Wang <zhenyu.z.wang at intel.com>
---
 drivers/gpu/drm/i915/intel_tv.c |   11 ++++-------
 1 files changed, 4 insertions(+), 7 deletions(-)

diff --git a/drivers/gpu/drm/i915/intel_tv.c b/drivers/gpu/drm/i915/intel_tv.c
index a0e4bc4..d7465ca 100644
--- a/drivers/gpu/drm/i915/intel_tv.c
+++ b/drivers/gpu/drm/i915/intel_tv.c
@@ -1213,20 +1213,17 @@ intel_tv_mode_set(struct drm_encoder *encoder, struct drm_display_mode *mode,
 		tv_ctl |= TV_TRILEVEL_SYNC;
 	if (tv_mode->pal_burst)
 		tv_ctl |= TV_PAL_BURST;
+
 	scctl1 = 0;
-	/* dda1 implies valid video levels */
-	if (tv_mode->dda1_inc) {
+	if (tv_mode->dda1_inc)
 		scctl1 |= TV_SC_DDA1_EN;
-	}
-
 	if (tv_mode->dda2_inc)
 		scctl1 |= TV_SC_DDA2_EN;
-
 	if (tv_mode->dda3_inc)
 		scctl1 |= TV_SC_DDA3_EN;
-
 	scctl1 |= tv_mode->sc_reset;
-	scctl1 |= video_levels->burst << TV_BURST_LEVEL_SHIFT;
+	if (video_levels)
+		scctl1 |= video_levels->burst << TV_BURST_LEVEL_SHIFT;
 	scctl1 |= tv_mode->dda1_inc << TV_SCDDA1_INC_SHIFT;
 
 	scctl2 = tv_mode->dda2_size << TV_SCDDA2_SIZE_SHIFT |
-- 
1.6.5.3