[Intel-gfx] [PATCH -v2] drm/i915: fix tiling on IGDNG

Zhenyu Wang zhenyuw at linux.intel.com
Wed Sep 2 04:57:52 CEST 2009


It seems that on IGDNG the same swizzling setup always applys.
And front buffer tiling needs to set address swizzle in display
arb control too.

Fix plane tricle feed setting in v1 which should be disable bit,
and always setup address swizzle to let hardware care for buffer
tiling in all cases.

Signed-off-by: Zhenyu Wang <zhenyuw at linux.intel.com>
---
 drivers/gpu/drm/i915/i915_gem_tiling.c |   15 +++++++--------
 drivers/gpu/drm/i915/i915_reg.h        |    4 ++++
 drivers/gpu/drm/i915/intel_display.c   |   10 ++++++++++
 3 files changed, 21 insertions(+), 8 deletions(-)

diff --git a/drivers/gpu/drm/i915/i915_gem_tiling.c b/drivers/gpu/drm/i915/i915_gem_tiling.c
index a2d527b..e774a4a 100644
--- a/drivers/gpu/drm/i915/i915_gem_tiling.c
+++ b/drivers/gpu/drm/i915/i915_gem_tiling.c
@@ -234,7 +234,13 @@ i915_gem_detect_bit_6_swizzle(struct drm_device *dev)
 	uint32_t swizzle_y = I915_BIT_6_SWIZZLE_UNKNOWN;
 	bool need_disable;
 
-	if (!IS_I9XX(dev)) {
+	if (IS_IGDNG(dev)) {
+		/* On IGDNG whatever DRAM config, GPU always do
+		 * same swizzling setup.
+		 */
+		swizzle_x = I915_BIT_6_SWIZZLE_9_10;
+		swizzle_y = I915_BIT_6_SWIZZLE_9;
+	} else if (!IS_I9XX(dev)) {
 		/* As far as we know, the 865 doesn't have these bit 6
 		 * swizzling issues.
 		 */
@@ -317,13 +323,6 @@ i915_gem_detect_bit_6_swizzle(struct drm_device *dev)
 		}
 	}
 
-	/* FIXME: check with memory config on IGDNG */
-	if (IS_IGDNG(dev)) {
-		DRM_ERROR("disable tiling on IGDNG...\n");
-		swizzle_x = I915_BIT_6_SWIZZLE_UNKNOWN;
-		swizzle_y = I915_BIT_6_SWIZZLE_UNKNOWN;
-	}
-
 	dev_priv->mm.bit_6_swizzle_x = swizzle_x;
 	dev_priv->mm.bit_6_swizzle_y = swizzle_y;
 }
diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h
index 884757c..e38cd21 100644
--- a/drivers/gpu/drm/i915/i915_reg.h
+++ b/drivers/gpu/drm/i915/i915_reg.h
@@ -1864,6 +1864,7 @@
 #define   DISPPLANE_NO_LINE_DOUBLE		0
 #define   DISPPLANE_STEREO_POLARITY_FIRST	0
 #define   DISPPLANE_STEREO_POLARITY_SECOND	(1<<18)
+#define   DISPPLANE_TRICKLE_FEED_DISABLE	(1<<14) /* IGDNG */
 #define   DISPPLANE_TILED			(1<<10)
 #define DSPAADDR		0x70184
 #define DSPASTRIDE		0x70188
@@ -2044,6 +2045,9 @@
 #define GTIIR   0x44018
 #define GTIER   0x4401c
 
+#define DISP_ARB_CTL	0x45000
+#define  DISP_TILE_SURFACE_SWIZZLING	(1<<13)
+
 /* PCH */
 
 /* south display engine interrupt */
diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c
index c4b17a7..2b75cbf 100644
--- a/drivers/gpu/drm/i915/intel_display.c
+++ b/drivers/gpu/drm/i915/intel_display.c
@@ -1064,6 +1064,10 @@ intel_pipe_set_base(struct drm_crtc *crtc, int x, int y,
 			dspcntr &= ~DISPPLANE_TILED;
 	}
 
+	if (IS_IGDNG(dev))
+		/* must disable */
+		dspcntr |= DISPPLANE_TRICKLE_FEED_DISABLE;
+
 	I915_WRITE(dspcntr_reg, dspcntr);
 
 	Start = obj_priv->gtt_offset;
@@ -2705,6 +2709,12 @@ static int intel_crtc_mode_set(struct drm_crtc *crtc,
 
 	intel_wait_for_vblank(dev);
 
+	if (IS_IGDNG(dev)) {
+		/* enable address swizzle for tiling buffer */
+		temp = I915_READ(DISP_ARB_CTL);
+		I915_WRITE(DISP_ARB_CTL, temp | DISP_TILE_SURFACE_SWIZZLING);
+	}
+
 	I915_WRITE(dspcntr_reg, dspcntr);
 
 	/* Flush the plane changes */
-- 
1.6.3.3




More information about the Intel-gfx mailing list