[Intel-gfx] 845 help
Rüdiger Härtel
r_haertel at gmx.de
Sun Aug 1 20:49:06 CEST 2010
Hello,
I have a 845GL graphics chip and the driver reports nearly every time I use my
copmuter that the GPU has hung up and acceleration is disabled. After this
happend a restart of X - which happens when I log off and on again - is not
possible anymore.
Is there any information I can provide to help finding the circumstances that
lead to this behaviour?
Regards,
Rüdiger
My system:
http://www.smolts.org/show?uuid=pub_663f9f31-d4fc-4845-8d9b-04636d8df99d
log file of X
------------>8---------->8---------------
[ 27.862]
X.Org X Server 1.8.0
Release Date: 2010-04-02
[ 27.925] X Protocol Version 11, Revision 0
[ 27.925] Build Operating System: openSUSE SUSE LINUX
[ 27.925] Current Operating System: Linux linux-dtz7 2.6.34-12-default #1
SMP 2010-06-29 02:39:08 +0200 i686
[ 27.925] Kernel command line: root=/dev/sda7 resume=/dev/disk/by-id/ata-
Maxtor_2F040L0_F1JJ857E-part6 splash=silent quiet elevator=cfq vga=0x31a
i915.modeset=1
[ 27.925] Build Date: 05 July 2010 09:26:26PM
[ 27.925]
[ 27.925] Current version of pixman: 0.18.0
[ 27.925] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 27.925] Markers: (--) probed, (**) from config file, (==) default
setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 27.926] (==) Log file: "/var/log/Xorg.0.log", Time: Sun Aug 1 20:05:31
2010
[ 27.966] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 27.966] (==) No Layout section. Using the first Screen section.
[ 27.966] (**) |-->Screen "Default Screen" (0)
[ 27.966] (**) | |-->Monitor "Default Monitor"
[ 27.967] (**) | |-->Device "Default Device"
[ 27.967] (==) Automatically adding devices
[ 27.967] (==) Automatically enabling devices
[ 27.967] (WW) The directory "/usr/share/fonts/TTF/" does not exist.
[ 27.967] Entry deleted from font path.
[ 27.967] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
[ 27.967] Entry deleted from font path.
[ 27.969] (WW) The directory "/usr/share/fonts/misc/sgi" does not exist.
[ 27.969] Entry deleted from font path.
[ 27.969] (==) FontPath set to:
/usr/share/fonts/misc:unscaled,
/usr/share/fonts/Type1/,
/usr/share/fonts/100dpi:unscaled,
/usr/share/fonts/75dpi:unscaled,
/usr/share/fonts/URW/,
/usr/share/fonts/cyrillic:unscaled,
/usr/share/fonts/truetype/
[ 27.969] (==) ModulePath set to
"/usr/lib/xorg/modules/updates,/usr/lib/xorg/modules"
[ 27.969] (II) The server relies on udev to provide the list of input
devices.
If no devices become available, reconfigure udev or disable
AutoAddDevices.
[ 27.969] (II) Loader magic: 0x822e500
[ 27.969] (II) Module ABI versions:
[ 27.969] X.Org ANSI C Emulation: 0.4
[ 27.969] X.Org Video Driver: 7.0
[ 27.969] X.Org XInput driver : 9.0
[ 27.969] X.Org Server Extension : 3.0
[ 28.045] (--) PCI:*(0:0:2:0) 8086:2562:1509:9016 Intel Corporation
82845G/GL[Brookdale-G]/GE Chipset Integrated Graphics Device rev 3, Mem @
0xd8000000/134217728, 0xe2000000/524288
[ 28.045] (II) Open ACPI successful (/var/run/acpid.socket)
[ 28.045] (II) LoadModule: "extmod"
[ 28.084] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
[ 28.086] (II) Module extmod: vendor="X.Org Foundation"
[ 28.086] compiled for 1.8.0, module version = 1.0.0
[ 28.086] Module class: X.Org Server Extension
[ 28.086] ABI class: X.Org Server Extension, version 3.0
[ 28.086] (II) Loading extension MIT-SCREEN-SAVER
[ 28.086] (II) Loading extension XFree86-VidModeExtension
[ 28.086] (II) Loading extension XFree86-DGA
[ 28.086] (II) Loading extension DPMS
[ 28.086] (II) Loading extension XVideo
[ 28.086] (II) Loading extension XVideo-MotionCompensation
[ 28.087] (II) Loading extension X-Resource
[ 28.087] (II) LoadModule: "dbe"
[ 28.091] (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
[ 28.095] (II) Module dbe: vendor="X.Org Foundation"
[ 28.095] compiled for 1.8.0, module version = 1.0.0
[ 28.095] Module class: X.Org Server Extension
[ 28.095] ABI class: X.Org Server Extension, version 3.0
[ 28.095] (II) Loading extension DOUBLE-BUFFER
[ 28.095] (II) LoadModule: "glx"
[ 28.117] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 28.118] (II) Module glx: vendor="X.Org Foundation"
[ 28.118] compiled for 1.8.0, module version = 1.0.0
[ 28.118] ABI class: X.Org Server Extension, version 3.0
[ 28.118] (==) AIGLX enabled
[ 28.118] (II) Loading extension GLX
[ 28.118] (II) LoadModule: "record"
[ 28.137] (II) Loading /usr/lib/xorg/modules/extensions/librecord.so
[ 28.137] (II) Module record: vendor="X.Org Foundation"
[ 28.137] compiled for 1.8.0, module version = 1.13.0
[ 28.137] Module class: X.Org Server Extension
[ 28.137] ABI class: X.Org Server Extension, version 3.0
[ 28.137] (II) Loading extension RECORD
[ 28.137] (II) LoadModule: "dri"
[ 28.156] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
[ 28.208] (II) Module dri: vendor="X.Org Foundation"
[ 28.208] compiled for 1.8.0, module version = 1.0.0
[ 28.208] ABI class: X.Org Server Extension, version 3.0
[ 28.208] (II) Loading extension XFree86-DRI
[ 28.208] (II) LoadModule: "dri2"
[ 28.210] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[ 28.211] (II) Module dri2: vendor="X.Org Foundation"
[ 28.211] compiled for 1.8.0, module version = 1.2.0
[ 28.211] ABI class: X.Org Server Extension, version 3.0
[ 28.211] (II) Loading extension DRI2
[ 28.211] (==) Matched intel as autoconfigured driver 0
[ 28.211] (==) Matched fbdev as autoconfigured driver 1
[ 28.211] (==) Matched vesa as autoconfigured driver 2
[ 28.211] (==) Assigned the driver to the xf86ConfigLayout
[ 28.211] (II) LoadModule: "intel"
[ 28.221] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
[ 28.221] (II) Module intel: vendor="X.Org Foundation"
[ 28.221] compiled for 1.8.0, module version = 2.12.0
[ 28.221] Module class: X.Org Video Driver
[ 28.221] ABI class: X.Org Video Driver, version 7.0
[ 28.221] (II) LoadModule: "fbdev"
[ 28.223] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so
[ 28.230] (II) Module fbdev: vendor="X.Org Foundation"
[ 28.230] compiled for 1.8.0, module version = 0.4.1
[ 28.230] ABI class: X.Org Video Driver, version 7.0
[ 28.230] (II) LoadModule: "vesa"
[ 28.236] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
[ 28.236] (II) Module vesa: vendor="X.Org Foundation"
[ 28.236] compiled for 1.8.0, module version = 2.2.1
[ 28.237] Module class: X.Org Video Driver
[ 28.237] ABI class: X.Org Video Driver, version 7.0
[ 28.237] (II) intel: Driver for Intel Integrated Graphics Chipsets: i810,
i810-dc100, i810e, i815, i830M, 845G, 852GM/855GM, 865G, 915G,
E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM, Pineview G,
965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33, GM45,
4 Series, G45/G43, Q45/Q43, G41, B43, Clarkdale, Arrandale
[ 28.237] (II) FBDEV: driver for framebuffer: fbdev
[ 28.237] (II) VESA: driver for VESA chipsets: vesa
[ 28.237] (++) using VT number 7
[ 28.247] (II) Primary Device is: PCI 00 at 00:02:0
[ 28.259] (WW) Falling back to old probe method for fbdev
[ 28.259] (II) Loading sub module "fbdevhw"
[ 28.259] (II) LoadModule: "fbdevhw"
[ 28.260] (II) Loading /usr/lib/xorg/modules/linux/libfbdevhw.so
[ 28.260] (II) Module fbdevhw: vendor="X.Org Foundation"
[ 28.261] compiled for 1.8.0, module version = 0.0.2
[ 28.261] ABI class: X.Org Video Driver, version 7.0
[ 28.261] (WW) Falling back to old probe method for vesa
[ 28.267] drmOpenDevice: node name is /dev/dri/card0
[ 28.267] drmOpenDevice: open result is 9, (OK)
[ 28.267] drmOpenByBusid: Searching for BusID pci:0000:00:02.0
[ 28.267] drmOpenDevice: node name is /dev/dri/card0
[ 28.267] drmOpenDevice: open result is 9, (OK)
[ 28.267] drmOpenByBusid: drmOpenMinor returns 9
[ 28.267] drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0
[ 28.267] (II) intel(0): Creating default Display subsection in Screen
section
"Default Screen" for depth/fbbpp 24/32
[ 28.267] (==) intel(0): Depth 24, (--) framebuffer bpp 32
[ 28.267] (==) intel(0): RGB weight 888
[ 28.267] (==) intel(0): Default visual is TrueColor
[ 28.267] (II) intel(0): Integrated Graphics Chipset: Intel(R) 845G
[ 28.267] (--) intel(0): Chipset: "845G"
[ 28.267] (==) intel(0): video overlay key set to 0x101fe
[ 28.665] (II) intel(0): Output VGA1 using monitor section Default Monitor
[ 28.785] (II) intel(0): EDID for output VGA1
[ 28.785] (II) intel(0): Manufacturer: BNQ Model: 7681 Serial#: 4115
[ 28.785] (II) intel(0): Year: 2004 Week: 15
[ 28.785] (II) intel(0): EDID Version: 1.3
[ 28.785] (II) intel(0): Analog Display Input, Input Voltage Level:
0.700/0.700 V
[ 28.785] (II) intel(0): Sync: Separate Composite
[ 28.785] (II) intel(0): Max Image Size [cm]: horiz.: 38 vert.: 30
[ 28.785] (II) intel(0): Gamma: 2.20
[ 28.785] (II) intel(0): DPMS capabilities: StandBy Suspend Off; RGB/Color
Display
[ 28.785] (II) intel(0): First detailed timing is preferred mode
[ 28.785] (II) intel(0): redX: 0.639 redY: 0.342 greenX: 0.297 greenY:
0.614
[ 28.785] (II) intel(0): blueX: 0.146 blueY: 0.067 whiteX: 0.312 whiteY:
0.328
[ 28.785] (II) intel(0): Supported established timings:
[ 28.785] (II) intel(0): 720x400 at 70Hz
[ 28.785] (II) intel(0): 640x480 at 60Hz
[ 28.785] (II) intel(0): 640x480 at 67Hz
[ 28.786] (II) intel(0): 640x480 at 72Hz
[ 28.786] (II) intel(0): 640x480 at 75Hz
[ 28.786] (II) intel(0): 800x600 at 60Hz
[ 28.786] (II) intel(0): 800x600 at 72Hz
[ 28.786] (II) intel(0): 800x600 at 75Hz
[ 28.786] (II) intel(0): 832x624 at 75Hz
[ 28.786] (II) intel(0): 1024x768 at 60Hz
[ 28.786] (II) intel(0): 1024x768 at 70Hz
[ 28.786] (II) intel(0): 1024x768 at 75Hz
[ 28.786] (II) intel(0): 1280x1024 at 75Hz
[ 28.790] (II) intel(0): 1152x864 at 75Hz
[ 28.790] (II) intel(0): Manufacturer's mask: 0
[ 28.790] (II) intel(0): Supported standard timings:
[ 28.790] (II) intel(0): #0: hsize: 1152 vsize 864 refresh: 75 vid:
20337
[ 28.790] (II) intel(0): #1: hsize: 1280 vsize 1024 refresh: 76 vid:
36993
[ 28.790] (II) intel(0): #2: hsize: 1280 vsize 1024 refresh: 60 vid:
32897
[ 28.790] (II) intel(0): #3: hsize: 1280 vsize 1024 refresh: 72 vid:
35969
[ 28.790] (II) intel(0): Supported detailed timing:
[ 28.790] (II) intel(0): clock: 108.0 MHz Image Size: 376 x 301 mm
[ 28.790] (II) intel(0): h_active: 1280 h_sync: 1328 h_sync_end 1440
h_blank_end 1688 h_border: 0
[ 28.790] (II) intel(0): v_active: 1024 v_sync: 1025 v_sync_end 1028
v_blanking: 1066 v_border: 0
[ 28.790] (II) intel(0): Supported detailed timing:
[ 28.790] (II) intel(0): clock: 25.2 MHz Image Size: 376 x 301 mm
[ 28.790] (II) intel(0): h_active: 640 h_sync: 656 h_sync_end 752
h_blank_end 800 h_border: 0
[ 28.790] (II) intel(0): v_active: 350 v_sync: 387 v_sync_end 389
v_blanking: 449 v_border: 0
[ 28.790] (II) intel(0): Ranges: V min: 56 V max: 76 Hz, H min: 31 H max:
83 kHz, PixClock max 140 MHz
[ 28.790] (II) intel(0): Monitor name: BenQ T904
[ 28.790] (II) intel(0): EDID (in hex):
[ 28.790] (II) intel(0): 00ffffffffffff0009d1817613100000
[ 28.790] (II) intel(0): 0f0e01036c261e78eaa150a3574c9d25
[ 28.790] (II) intel(0): 115054bdef80714f81908180818c0101
[ 28.791] (II) intel(0): 010101010101302a009851002a403070
[ 28.791] (II) intel(0): 1300782d1100001ed50980a0205e6310
[ 28.791] (II) intel(0): 10605208782d1100001a000000fd0038
[ 28.791] (II) intel(0): 4c1f530e000a202020202020000000fc
[ 28.791] (II) intel(0): 0042656e5120543930340a20202000b9
[ 28.791] (II) intel(0): EDID vendor "BNQ", prod id 30337
[ 28.791] (II) intel(0): Using EDID range info for horizontal sync
[ 28.791] (II) intel(0): Using EDID range info for vertical refresh
[ 28.791] (II) intel(0): Printing DDC gathered Modelines:
[ 28.791] (II) intel(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440
1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
[ 28.791] (II) intel(0): Modeline "640x350"x0.0 25.17 640 656 752 800
350 387 389 449 +hsync -vsync (31.5 kHz)
[ 28.791] (II) intel(0): Modeline "800x600"x0.0 40.00 800 840 968 1056
600 601 605 628 +hsync +vsync (37.9 kHz)
[ 28.791] (II) intel(0): Modeline "640x480"x0.0 31.50 640 656 720 840
480 481 484 500 -hsync -vsync (37.5 kHz)
[ 28.791] (II) intel(0): Modeline "640x480"x0.0 31.50 640 664 704 832
480 489 492 520 -hsync -vsync (37.9 kHz)
[ 28.791] (II) intel(0): Modeline "640x480"x0.0 30.24 640 704 768 864
480 483 486 525 -hsync -vsync (35.0 kHz)
[ 28.791] (II) intel(0): Modeline "640x480"x0.0 25.18 640 656 752 800
480 490 492 525 -hsync -vsync (31.5 kHz)
[ 28.791] (II) intel(0): Modeline "720x400"x0.0 28.32 720 738 846 900
400 412 414 449 -hsync +vsync (31.5 kHz)
[ 28.791] (II) intel(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440
1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
[ 28.791] (II) intel(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136
1312 768 769 772 800 +hsync +vsync (60.0 kHz)
[ 28.791] (II) intel(0): Modeline "1024x768"x0.0 75.00 1024 1048 1184
1328 768 771 777 806 -hsync -vsync (56.5 kHz)
[ 28.791] (II) intel(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184
1344 768 771 777 806 -hsync -vsync (48.4 kHz)
[ 28.791] (II) intel(0): Modeline "832x624"x0.0 57.28 832 864 928 1152
624 625 628 667 -hsync -vsync (49.7 kHz)
[ 28.791] (II) intel(0): Modeline "800x600"x0.0 49.50 800 816 896 1056
600 601 604 625 +hsync +vsync (46.9 kHz)
[ 28.791] (II) intel(0): Modeline "800x600"x0.0 50.00 800 856 976 1040
600 637 643 666 +hsync +vsync (48.1 kHz)
[ 28.791] (II) intel(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344
1600 864 865 868 900 +hsync +vsync (67.5 kHz)
[ 28.791] (II) intel(0): Modeline "1280x1024"x76.0 141.82 1280 1376 1512
1744 1024 1025 1028 1070 -hsync +vsync (81.3 kHz)
[ 28.791] (II) intel(0): Modeline "1280x1024"x72.0 132.75 1280 1368 1504
1728 1024 1025 1028 1067 -hsync +vsync (76.8 kHz)
[ 28.791] (II) intel(0): Not using mode "1280x1024" (bad mode
clock/interlace/doublescan)
[ 28.791] (II) intel(0): Printing probed modes for output VGA1
[ 28.791] (II) intel(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440
1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
[ 28.791] (II) intel(0): Modeline "1280x1024"x75.0 135.00 1280 1296 1440
1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
[ 28.791] (II) intel(0): Modeline "1280x1024"x72.0 132.84 1280 1368 1504
1728 1024 1025 1028 1067 -hsync +vsync (76.9 kHz)
[ 28.792] (II) intel(0): Modeline "1152x864"x75.0 108.00 1152 1216 1344
1600 864 865 868 900 +hsync +vsync (67.5 kHz)
[ 28.792] (II) intel(0): Modeline "1024x768"x75.1 78.80 1024 1040 1136
1312 768 769 772 800 +hsync +vsync (60.1 kHz)
[ 28.792] (II) intel(0): Modeline "1024x768"x70.1 75.00 1024 1048 1184
1328 768 771 777 806 -hsync -vsync (56.5 kHz)
[ 28.792] (II) intel(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184
1344 768 771 777 806 -hsync -vsync (48.4 kHz)
[ 28.792] (II) intel(0): Modeline "832x624"x74.6 57.28 832 864 928 1152
624 625 628 667 -hsync -vsync (49.7 kHz)
[ 28.792] (II) intel(0): Modeline "800x600"x72.2 50.00 800 856 976 1040
600 637 643 666 +hsync +vsync (48.1 kHz)
[ 28.792] (II) intel(0): Modeline "800x600"x75.0 49.50 800 816 896 1056
600 601 604 625 +hsync +vsync (46.9 kHz)
[ 28.792] (II) intel(0): Modeline "800x600"x60.3 40.00 800 840 968 1056
600 601 605 628 +hsync +vsync (37.9 kHz)
[ 28.792] (II) intel(0): Modeline "640x480"x72.8 31.50 640 664 704 832
480 489 491 520 -hsync -vsync (37.9 kHz)
[ 28.792] (II) intel(0): Modeline "640x480"x75.0 31.50 640 656 720 840
480 481 484 500 -hsync -vsync (37.5 kHz)
[ 28.792] (II) intel(0): Modeline "640x480"x66.7 30.24 640 704 768 864
480 483 486 525 -hsync -vsync (35.0 kHz)
[ 28.792] (II) intel(0): Modeline "640x480"x60.0 25.20 640 656 752 800
480 490 492 525 -hsync -vsync (31.5 kHz)
[ 28.792] (II) intel(0): Modeline "720x400"x70.1 28.32 720 738 846 900
400 412 414 449 -hsync +vsync (31.5 kHz)
[ 28.792] (II) intel(0): Modeline "640x350"x70.1 25.17 640 656 752 800
350 357 359 449 +hsync -vsync (31.5 kHz)
[ 28.792] (II) intel(0): Output VGA1 connected
[ 28.792] (II) intel(0): Using exact sizes for initial modes
[ 28.792] (II) intel(0): Output VGA1 using initial mode 1280x1024
[ 28.792] (II) intel(0): Using default gamma of (1.0, 1.0, 1.0) unless
otherwise stated.
[ 28.792] (II) intel(0): Kernel page flipping support detected, enabling
[ 28.792] (**) intel(0): Display dimensions: (380, 300) mm
[ 28.792] (**) intel(0): DPI set to (85, 86)
[ 28.792] (II) Loading sub module "fb"
[ 28.792] (II) LoadModule: "fb"
[ 28.793] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 28.793] (II) Module fb: vendor="X.Org Foundation"
[ 28.793] compiled for 1.8.0, module version = 1.0.0
[ 28.793] ABI class: X.Org ANSI C Emulation, version 0.4
[ 28.793] (II) UnloadModule: "fbdev"
[ 28.793] (II) Unloading /usr/lib/xorg/modules/drivers/fbdev_drv.so
[ 28.794] (II) UnloadModule: "fbdevhw"
[ 28.794] (II) Unloading /usr/lib/xorg/modules/linux/libfbdevhw.so
[ 28.794] (II) UnloadModule: "vesa"
[ 28.794] (II) Unloading /usr/lib/xorg/modules/drivers/vesa_drv.so
[ 28.794] (==) Depth 24 pixmap format is 32 bpp
[ 28.794] (II) intel(0): [DRI2] Setup complete
[ 28.794] (II) intel(0): [DRI2] DRI driver: i915
[ 28.794] (**) intel(0): Tiling enabled
[ 28.794] (**) intel(0): SwapBuffers wait enabled
[ 28.794] (==) intel(0): VideoRam: 131072 KB
[ 28.794] (II) intel(0): Allocated new frame buffer 1280x1024 stride 8192,
tiled
[ 28.794] (II) UXA(0): Driver registered support for the following
operations:
[ 28.794] (II) solid
[ 28.794] (II) copy
[ 28.794] (II) composite (RENDER acceleration)
[ 28.794] (II) put_image
[ 28.794] (II) get_image
[ 28.794] (==) intel(0): Backing store disabled
[ 28.794] (==) intel(0): Silken mouse enabled
[ 28.794] (II) intel(0): Initializing HW Cursor
[ 28.856] (II) intel(0): RandR 1.2 enabled, ignore the following RandR
disabled message.
[ 28.856] (==) intel(0): DPMS enabled
[ 28.856] (==) intel(0): Intel XvMC decoder disabled
[ 28.856] (II) intel(0): Set up overlay video
[ 28.856] (II) intel(0): direct rendering: DRI2 Enabled
[ 28.857] (--) RandR disabled
[ 28.857] (II) Initializing built-in extension Generic Event Extension
[ 28.857] (II) Initializing built-in extension SHAPE
[ 28.857] (II) Initializing built-in extension MIT-SHM
[ 28.857] (II) Initializing built-in extension XInputExtension
[ 28.857] (II) Initializing built-in extension XTEST
[ 28.857] (II) Initializing built-in extension BIG-REQUESTS
[ 28.857] (II) Initializing built-in extension SYNC
[ 28.857] (II) Initializing built-in extension XKEYBOARD
[ 28.857] (II) Initializing built-in extension XC-MISC
[ 28.857] (II) Initializing built-in extension SECURITY
[ 28.857] (II) Initializing built-in extension XINERAMA
[ 28.857] (II) Initializing built-in extension XFIXES
[ 28.857] (II) Initializing built-in extension RENDER
[ 28.857] (II) Initializing built-in extension RANDR
[ 28.857] (II) Initializing built-in extension COMPOSITE
[ 28.857] (II) Initializing built-in extension DAMAGE
[ 28.882] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
[ 28.882] (II) AIGLX: enabled GLX_INTEL_swap_event
[ 28.882] (II) AIGLX: enabled GLX_SGI_make_current_read
[ 28.882] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
[ 28.882] (II) AIGLX: Loaded and initialized /usr/lib/dri/i915_dri.so
[ 28.882] (II) GLX: Initialized DRI2 GL provider for screen 0
[ 28.883] (II) intel(0): Setting screen physical size to 338 x 270
[ 29.092] (II) XKB: reuse xkmfile
/var/lib/xkb/compiled/server-8AA988DD479FAABEC4FC3CCCF4CC29B4948840B4.xkm
[ 29.114] (II) config/udev: Adding input device Power Button
(/dev/input/event1)
[ 29.115] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 29.115] (**) Power Button: Applying InputClass "LocalKeyboard"
[ 29.115] (II) LoadModule: "evdev"
[ 29.117] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 29.117] (II) Module evdev: vendor="X.Org Foundation"
[ 29.117] compiled for 1.8.0, module version = 2.4.0
[ 29.117] Module class: X.Org XInput Driver
[ 29.117] ABI class: X.Org XInput driver, version 9.0
[ 29.117] (**) Power Button: always reports core events
[ 29.117] (**) Power Button: Device: "/dev/input/event1"
[ 29.118] (II) Power Button: Found keys
[ 29.118] (II) Power Button: Configuring as keyboard
[ 29.118] (II) XINPUT: Adding extended input device "Power Button" (type:
KEYBOARD)
[ 29.118] (**) Option "xkb_rules" "evdev"
[ 29.118] (**) Option "xkb_model" "evdev"
[ 29.118] (**) Option "xkb_layout" "de"
[ 29.118] (**) Option "xkb_variant" "nodeadkeys"
[ 29.118] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
[ 29.125] (II) XKB: reuse xkmfile
/var/lib/xkb/compiled/server-3D86ED3B3259B9D0586E96CC233857E92CC5F57B.xkm
[ 29.128] (II) config/udev: Adding input device Power Button
(/dev/input/event0)
[ 29.128] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 29.128] (**) Power Button: Applying InputClass "LocalKeyboard"
[ 29.128] (**) Power Button: always reports core events
[ 29.128] (**) Power Button: Device: "/dev/input/event0"
[ 29.128] (II) Power Button: Found keys
[ 29.128] (II) Power Button: Configuring as keyboard
[ 29.128] (II) XINPUT: Adding extended input device "Power Button" (type:
KEYBOARD)
[ 29.128] (**) Option "xkb_rules" "evdev"
[ 29.128] (**) Option "xkb_model" "evdev"
[ 29.128] (**) Option "xkb_layout" "de"
[ 29.128] (**) Option "xkb_variant" "nodeadkeys"
[ 29.128] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
[ 29.131] (II) config/udev: Adding input device Logitech USB Receiver
(/dev/input/event3)
[ 29.131] (**) Logitech USB Receiver: Applying InputClass "evdev keyboard
catchall"
[ 29.131] (**) Logitech USB Receiver: Applying InputClass "LocalKeyboard"
[ 29.131] (**) Logitech USB Receiver: always reports core events
[ 29.131] (**) Logitech USB Receiver: Device: "/dev/input/event3"
[ 29.131] (II) Logitech USB Receiver: Found keys
[ 29.131] (II) Logitech USB Receiver: Configuring as keyboard
[ 29.131] (II) XINPUT: Adding extended input device "Logitech USB Receiver"
(type: KEYBOARD)
[ 29.131] (**) Option "xkb_rules" "evdev"
[ 29.131] (**) Option "xkb_model" "evdev"
[ 29.132] (**) Option "xkb_layout" "de"
[ 29.132] (**) Option "xkb_variant" "nodeadkeys"
[ 29.132] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
[ 29.133] (II) config/udev: Adding input device Logitech USB Receiver
(/dev/input/event4)
[ 29.133] (**) Logitech USB Receiver: Applying InputClass "evdev pointer
catchall"
[ 29.133] (**) Logitech USB Receiver: Applying InputClass "evdev keyboard
catchall"
[ 29.133] (**) Logitech USB Receiver: Applying InputClass "LocalKeyboard"
[ 29.133] (**) Logitech USB Receiver: always reports core events
[ 29.133] (**) Logitech USB Receiver: Device: "/dev/input/event4"
[ 29.133] (II) Logitech USB Receiver: Found 12 mouse buttons
[ 29.133] (II) Logitech USB Receiver: Found scroll wheel(s)
[ 29.133] (II) Logitech USB Receiver: Found relative axes
[ 29.133] (II) Logitech USB Receiver: Found x and y relative axes
[ 29.133] (II) Logitech USB Receiver: Found absolute axes
[ 29.133] (II) Logitech USB Receiver: Found keys
[ 29.133] (II) Logitech USB Receiver: Configuring as mouse
[ 29.133] (II) Logitech USB Receiver: Configuring as keyboard
[ 29.133] (**) Logitech USB Receiver: YAxisMapping: buttons 4 and 5
[ 29.133] (**) Logitech USB Receiver: EmulateWheelButton: 4,
EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 29.133] (II) XINPUT: Adding extended input device "Logitech USB Receiver"
(type: KEYBOARD)
[ 29.133] (**) Option "xkb_rules" "evdev"
[ 29.133] (**) Option "xkb_model" "evdev"
[ 29.133] (**) Option "xkb_layout" "de"
[ 29.134] (**) Option "xkb_variant" "nodeadkeys"
[ 29.134] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
[ 29.134] (**) Logitech USB Receiver: (accel) keeping acceleration scheme 1
[ 29.134] (**) Logitech USB Receiver: (accel) acceleration profile 0
[ 29.134] (**) Logitech USB Receiver: (accel) acceleration factor: 2.000
[ 29.134] (**) Logitech USB Receiver: (accel) acceleration threshold: 4
[ 29.134] (II) Logitech USB Receiver: initialized for relative axes.
[ 29.134] (WW) Logitech USB Receiver: ignoring absolute axes.
[ 29.135] (II) config/udev: Adding input device Logitech USB Receiver
(/dev/input/mouse0)
[ 29.135] (**) Logitech USB Receiver: Applying InputClass "LocalKeyboard"
[ 29.135] (EE) No input driver/identifier specified (ignoring)
[ 29.149] (II) config/udev: Adding input device PC Speaker
(/dev/input/event2)
[ 29.149] (EE) No input driver/identifier specified (ignoring)
[ 35.960] (II) intel(0): EDID vendor "BNQ", prod id 30337
[ 35.960] (II) intel(0): Using hsync ranges from config file
[ 35.960] (II) intel(0): Using vrefresh ranges from config file
[ 35.960] (II) intel(0): Printing DDC gathered Modelines:
[ 35.960] (II) intel(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440
1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
[ 35.961] (II) intel(0): Modeline "640x350"x0.0 25.17 640 656 752 800
350 387 389 449 +hsync -vsync (31.5 kHz)
[ 35.961] (II) intel(0): Modeline "800x600"x0.0 40.00 800 840 968 1056
600 601 605 628 +hsync +vsync (37.9 kHz)
[ 35.961] (II) intel(0): Modeline "640x480"x0.0 31.50 640 656 720 840
480 481 484 500 -hsync -vsync (37.5 kHz)
[ 35.961] (II) intel(0): Modeline "640x480"x0.0 31.50 640 664 704 832
480 489 492 520 -hsync -vsync (37.9 kHz)
[ 35.961] (II) intel(0): Modeline "640x480"x0.0 30.24 640 704 768 864
480 483 486 525 -hsync -vsync (35.0 kHz)
[ 35.961] (II) intel(0): Modeline "640x480"x0.0 25.18 640 656 752 800
480 490 492 525 -hsync -vsync (31.5 kHz)
[ 35.961] (II) intel(0): Modeline "720x400"x0.0 28.32 720 738 846 900
400 412 414 449 -hsync +vsync (31.5 kHz)
[ 35.961] (II) intel(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440
1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
[ 35.961] (II) intel(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136
1312 768 769 772 800 +hsync +vsync (60.0 kHz)
[ 35.961] (II) intel(0): Modeline "1024x768"x0.0 75.00 1024 1048 1184
1328 768 771 777 806 -hsync -vsync (56.5 kHz)
[ 35.961] (II) intel(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184
1344 768 771 777 806 -hsync -vsync (48.4 kHz)
[ 35.961] (II) intel(0): Modeline "832x624"x0.0 57.28 832 864 928 1152
624 625 628 667 -hsync -vsync (49.7 kHz)
[ 35.961] (II) intel(0): Modeline "800x600"x0.0 49.50 800 816 896 1056
600 601 604 625 +hsync +vsync (46.9 kHz)
[ 35.961] (II) intel(0): Modeline "800x600"x0.0 50.00 800 856 976 1040
600 637 643 666 +hsync +vsync (48.1 kHz)
[ 35.961] (II) intel(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344
1600 864 865 868 900 +hsync +vsync (67.5 kHz)
[ 35.961] (II) intel(0): Modeline "1280x1024"x76.0 141.82 1280 1376 1512
1744 1024 1025 1028 1070 -hsync +vsync (81.3 kHz)
[ 35.961] (II) intel(0): Modeline "1280x1024"x72.0 132.75 1280 1368 1504
1728 1024 1025 1028 1067 -hsync +vsync (76.8 kHz)
[ 36.083] (II) XKB: reuse xkmfile /var/lib/xkb/compiled/server-
A9ACCDF38EB1446AC7992CE0B930842F0AD908B1.xkm
[ 45.839] (II) XKB: reuse xkmfile
/var/lib/xkb/compiled/server-51837A4F2B29F46E2282DF3BB5395883027C8B05.xkm
[ 59.680] (II) intel(0): EDID vendor "BNQ", prod id 30337
[ 59.680] (II) intel(0): Using hsync ranges from config file
[ 59.680] (II) intel(0): Using vrefresh ranges from config file
[ 59.680] (II) intel(0): Printing DDC gathered Modelines:
[ 59.680] (II) intel(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440
1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
[ 59.680] (II) intel(0): Modeline "640x350"x0.0 25.17 640 656 752 800
350 387 389 449 +hsync -vsync (31.5 kHz)
[ 59.680] (II) intel(0): Modeline "800x600"x0.0 40.00 800 840 968 1056
600 601 605 628 +hsync +vsync (37.9 kHz)
[ 59.680] (II) intel(0): Modeline "640x480"x0.0 31.50 640 656 720 840
480 481 484 500 -hsync -vsync (37.5 kHz)
[ 59.680] (II) intel(0): Modeline "640x480"x0.0 31.50 640 664 704 832
480 489 492 520 -hsync -vsync (37.9 kHz)
[ 59.680] (II) intel(0): Modeline "640x480"x0.0 30.24 640 704 768 864
480 483 486 525 -hsync -vsync (35.0 kHz)
[ 59.680] (II) intel(0): Modeline "640x480"x0.0 25.18 640 656 752 800
480 490 492 525 -hsync -vsync (31.5 kHz)
[ 59.680] (II) intel(0): Modeline "720x400"x0.0 28.32 720 738 846 900
400 412 414 449 -hsync +vsync (31.5 kHz)
[ 59.680] (II) intel(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440
1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
[ 59.680] (II) intel(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136
1312 768 769 772 800 +hsync +vsync (60.0 kHz)
[ 59.680] (II) intel(0): Modeline "1024x768"x0.0 75.00 1024 1048 1184
1328 768 771 777 806 -hsync -vsync (56.5 kHz)
[ 59.680] (II) intel(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184
1344 768 771 777 806 -hsync -vsync (48.4 kHz)
[ 59.680] (II) intel(0): Modeline "832x624"x0.0 57.28 832 864 928 1152
624 625 628 667 -hsync -vsync (49.7 kHz)
[ 59.680] (II) intel(0): Modeline "800x600"x0.0 49.50 800 816 896 1056
600 601 604 625 +hsync +vsync (46.9 kHz)
[ 59.680] (II) intel(0): Modeline "800x600"x0.0 50.00 800 856 976 1040
600 637 643 666 +hsync +vsync (48.1 kHz)
[ 59.680] (II) intel(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344
1600 864 865 868 900 +hsync +vsync (67.5 kHz)
[ 59.680] (II) intel(0): Modeline "1280x1024"x76.0 141.82 1280 1376 1512
1744 1024 1025 1028 1070 -hsync +vsync (81.3 kHz)
[ 59.681] (II) intel(0): Modeline "1280x1024"x72.0 132.75 1280 1368 1504
1728 1024 1025 1028 1067 -hsync +vsync (76.8 kHz)
[ 87.512] (II) intel(0): EDID vendor "BNQ", prod id 30337
[ 87.512] (II) intel(0): Using hsync ranges from config file
[ 87.512] (II) intel(0): Using vrefresh ranges from config file
[ 87.512] (II) intel(0): Printing DDC gathered Modelines:
[ 87.512] (II) intel(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440
1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
[ 87.512] (II) intel(0): Modeline "640x350"x0.0 25.17 640 656 752 800
350 387 389 449 +hsync -vsync (31.5 kHz)
[ 87.512] (II) intel(0): Modeline "800x600"x0.0 40.00 800 840 968 1056
600 601 605 628 +hsync +vsync (37.9 kHz)
[ 87.512] (II) intel(0): Modeline "640x480"x0.0 31.50 640 656 720 840
480 481 484 500 -hsync -vsync (37.5 kHz)
[ 87.512] (II) intel(0): Modeline "640x480"x0.0 31.50 640 664 704 832
480 489 492 520 -hsync -vsync (37.9 kHz)
[ 87.512] (II) intel(0): Modeline "640x480"x0.0 30.24 640 704 768 864
480 483 486 525 -hsync -vsync (35.0 kHz)
[ 87.512] (II) intel(0): Modeline "640x480"x0.0 25.18 640 656 752 800
480 490 492 525 -hsync -vsync (31.5 kHz)
[ 87.512] (II) intel(0): Modeline "720x400"x0.0 28.32 720 738 846 900
400 412 414 449 -hsync +vsync (31.5 kHz)
[ 87.512] (II) intel(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440
1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
[ 87.512] (II) intel(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136
1312 768 769 772 800 +hsync +vsync (60.0 kHz)
[ 87.512] (II) intel(0): Modeline "1024x768"x0.0 75.00 1024 1048 1184
1328 768 771 777 806 -hsync -vsync (56.5 kHz)
[ 87.512] (II) intel(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184
1344 768 771 777 806 -hsync -vsync (48.4 kHz)
[ 87.512] (II) intel(0): Modeline "832x624"x0.0 57.28 832 864 928 1152
624 625 628 667 -hsync -vsync (49.7 kHz)
[ 87.512] (II) intel(0): Modeline "800x600"x0.0 49.50 800 816 896 1056
600 601 604 625 +hsync +vsync (46.9 kHz)
[ 87.512] (II) intel(0): Modeline "800x600"x0.0 50.00 800 856 976 1040
600 637 643 666 +hsync +vsync (48.1 kHz)
[ 87.512] (II) intel(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344
1600 864 865 868 900 +hsync +vsync (67.5 kHz)
[ 87.512] (II) intel(0): Modeline "1280x1024"x76.0 141.82 1280 1376 1512
1744 1024 1025 1028 1070 -hsync +vsync (81.3 kHz)
[ 87.512] (II) intel(0): Modeline "1280x1024"x72.0 132.75 1280 1368 1504
1728 1024 1025 1028 1067 -hsync +vsync (76.8 kHz)
[ 234.488] (EE) intel(0): Detected a hung GPU, disabling acceleration.
[ 234.600] (WW) intel(0): i830_uxa_prepare_access: gtt bo map failed:
Input/output error
------------8<----------8<---------------
More information about the Intel-gfx
mailing list