[Intel-gfx] [PATCH] drm/i915/opregion: Use ASLE response codes defined in 0.1

[Chris Wilson]

Within i915_opregion.c there are two blocks of semantically identical
ASLE response codes defined. Only one of those matches the ACPI IGD
OpRegion Specification 0.1, use those.

Signed-off-by: Chris Wilson <chris at chris-wilson.co.uk>
Cc: Matthew Garrett <mjg59 at srcf.ucam.org>
---
 drivers/gpu/drm/i915/i915_opregion.c |   10 +++-------
 1 files changed, 3 insertions(+), 7 deletions(-)

diff --git a/drivers/gpu/drm/i915/i915_opregion.c b/drivers/gpu/drm/i915/i915_opregion.c
index 8fcc75c..ce402b2 100644
--- a/drivers/gpu/drm/i915/i915_opregion.c
+++ b/drivers/gpu/drm/i915/i915_opregion.c
@@ -114,10 +114,6 @@ struct opregion_asle {
 #define ASLE_REQ_MSK           0xf
 
 /* response bits of ASLE irq request */
-#define ASLE_ALS_ILLUM_FAIL    (2<<10)
-#define ASLE_BACKLIGHT_FAIL    (2<<12)
-#define ASLE_PFIT_FAIL         (2<<14)
-#define ASLE_PWM_FREQ_FAIL     (2<<16)
 #define ASLE_ALS_ILLUM_FAILED	(1<<10)
 #define ASLE_BACKLIGHT_FAILED	(1<<12)
 #define ASLE_PFIT_FAILED	(1<<14)
@@ -155,11 +151,11 @@ static u32 asle_set_backlight(struct drm_device *dev, u32 bclp)
 	u32 max_backlight, level, shift;
 
 	if (!(bclp & ASLE_BCLP_VALID))
-		return ASLE_BACKLIGHT_FAIL;
+		return ASLE_BACKLIGHT_FAILED;
 
 	bclp &= ASLE_BCLP_MSK;
 	if (bclp < 0 || bclp > 255)
-		return ASLE_BACKLIGHT_FAIL;
+		return ASLE_BACKLIGHT_FAILED;
 
 	blc_pwm_ctl = I915_READ(BLC_PWM_CTL);
 	blc_pwm_ctl2 = I915_READ(BLC_PWM_CTL2);
@@ -211,7 +207,7 @@ static u32 asle_set_pfit(struct drm_device *dev, u32 pfit)
 	/* Panel fitting is currently controlled by the X code, so this is a
 	   noop until modesetting support works fully */
 	if (!(pfit & ASLE_PFIT_VALID))
-		return ASLE_PFIT_FAIL;
+		return ASLE_PFIT_FAILED;
 	return 0;
 }
 
-- 
1.7.1