[Intel-gfx] [PATCH 2/7] drm/i915: eDP mode set sequence corrections

[Jesse Barnes]

We should disable the panel first when shutting down an eDP link.  And
when turning one on, the panel needs to be enabled before link training
or eDP I/O won't be enabled.

Signed-off-by: Jesse Barnes <jbarnes at virtuousgeek.org>
---
 drivers/gpu/drm/i915/intel_dp.c |   15 ++++++++-------
 1 files changed, 8 insertions(+), 7 deletions(-)

diff --git a/drivers/gpu/drm/i915/intel_dp.c b/drivers/gpu/drm/i915/intel_dp.c
index 048e6a0..cb62c02 100644
--- a/drivers/gpu/drm/i915/intel_dp.c
+++ b/drivers/gpu/drm/i915/intel_dp.c
@@ -809,20 +809,21 @@ intel_dp_dpms(struct drm_encoder *encoder, int mode)
 	uint32_t dp_reg = I915_READ(dp_priv->output_reg);
 
 	if (mode != DRM_MODE_DPMS_ON) {
+		if (IS_eDP(intel_encoder)) {
+			ironlake_edp_backlight_off(dev);
+			ironlake_edp_panel_off(dev);
+		}
 		if (dp_reg & DP_PORT_EN) {
 			intel_dp_link_down(intel_encoder, dp_priv->DP);
-			if (IS_eDP(intel_encoder)) {
-				ironlake_edp_backlight_off(dev);
-				ironlake_edp_panel_off(dev);
-			}
 		}
 	} else {
 		if (!(dp_reg & DP_PORT_EN)) {
-			intel_dp_link_train(intel_encoder, dp_priv->DP, dp_priv->link_configuration);
-			if (IS_eDP(intel_encoder)) {
+			if (IS_eDP(intel_encoder))
 				ironlake_edp_panel_on(dev);
+			intel_dp_link_train(intel_encoder, dp_priv->DP,
+					    dp_priv->link_configuration);
+			if (IS_eDP(intel_encoder))
 				ironlake_edp_backlight_on(dev);
-			}
 		}
 	}
 	dp_priv->dpms_mode = mode;
-- 
1.7.0.4