[Intel-gfx] [PATCH 4/7] drm/i915: make sure eDP PLL is enabled at the right time
Jesse Barnes
jbarnes at virtuousgeek.org
Wed Aug 18 21:00:33 CEST 2010
We need to make sure the eDP PLL is enabled before the pipes or planes,
so do it as part of the DP prepare mode set function.
Signed-off-by: Jesse Barnes <jbarnes at virtuousgeek.org>
---
drivers/gpu/drm/i915/intel_display.c | 39 +--------------------
drivers/gpu/drm/i915/intel_dp.c | 63 ++++++++++++++++++++++++++++++++-
2 files changed, 63 insertions(+), 39 deletions(-)
diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c
index fe52a3f..6dab095 100644
--- a/drivers/gpu/drm/i915/intel_display.c
+++ b/drivers/gpu/drm/i915/intel_display.c
@@ -1457,31 +1457,6 @@ intel_pipe_set_base(struct drm_crtc *crtc, int x, int y,
return 0;
}
-static void ironlake_disable_pll_edp (struct drm_crtc *crtc)
-{
- struct drm_device *dev = crtc->dev;
- struct drm_i915_private *dev_priv = dev->dev_private;
- u32 dpa_ctl;
-
- DRM_DEBUG_KMS("\n");
- dpa_ctl = I915_READ(DP_A);
- dpa_ctl &= ~DP_PLL_ENABLE;
- I915_WRITE(DP_A, dpa_ctl);
-}
-
-static void ironlake_enable_pll_edp (struct drm_crtc *crtc)
-{
- struct drm_device *dev = crtc->dev;
- struct drm_i915_private *dev_priv = dev->dev_private;
- u32 dpa_ctl;
-
- dpa_ctl = I915_READ(DP_A);
- dpa_ctl |= DP_PLL_ENABLE;
- I915_WRITE(DP_A, dpa_ctl);
- udelay(200);
-}
-
-
static void ironlake_set_pll_edp (struct drm_crtc *crtc, int clock)
{
struct drm_device *dev = crtc->dev;
@@ -1785,11 +1760,7 @@ static void ironlake_crtc_dpms(struct drm_crtc *crtc, int mode)
}
}
- if (HAS_eDP) {
- /* enable eDP PLL */
- ironlake_enable_pll_edp(crtc);
- } else {
-
+ if (!HAS_eDP) {
/* enable PCH FDI RX PLL, wait warmup plus DMI latency */
temp = I915_READ(fdi_rx_reg);
/*
@@ -2099,10 +2070,6 @@ static void ironlake_crtc_dpms(struct drm_crtc *crtc, int mode)
I915_WRITE(pch_dpll_reg, temp & ~DPLL_VCO_ENABLE);
I915_READ(pch_dpll_reg);
- if (HAS_eDP) {
- ironlake_disable_pll_edp(crtc);
- }
-
/* Switch from PCDclk to Rawclk */
temp = I915_READ(fdi_rx_reg);
temp &= ~FDI_SEL_PCDCLK;
@@ -3663,9 +3630,7 @@ static int intel_crtc_mode_set(struct drm_crtc *crtc,
dpll_reg = pch_dpll_reg;
}
- if (is_edp) {
- ironlake_disable_pll_edp(crtc);
- } else if ((dpll & DPLL_VCO_ENABLE)) {
+ if (!is_edp) {
I915_WRITE(fp_reg, fp);
I915_WRITE(dpll_reg, dpll & ~DPLL_VCO_ENABLE);
I915_READ(dpll_reg);
diff --git a/drivers/gpu/drm/i915/intel_dp.c b/drivers/gpu/drm/i915/intel_dp.c
index cb62c02..87b7a49 100644
--- a/drivers/gpu/drm/i915/intel_dp.c
+++ b/drivers/gpu/drm/i915/intel_dp.c
@@ -799,6 +799,63 @@ static void ironlake_edp_backlight_off (struct drm_device *dev)
I915_WRITE(PCH_PP_CONTROL, pp);
}
+static void ironlake_edp_pll_on(struct drm_encoder *encoder)
+{
+ struct drm_device *dev = encoder->dev;
+ struct drm_i915_private *dev_priv = dev->dev_private;
+ u32 dpa_ctl;
+
+ DRM_DEBUG_KMS("\n");
+ dpa_ctl = I915_READ(DP_A);
+ dpa_ctl &= ~DP_PLL_ENABLE;
+ I915_WRITE(DP_A, dpa_ctl);
+}
+
+static void ironlake_edp_pll_off(struct drm_encoder *encoder)
+{
+ struct drm_device *dev = encoder->dev;
+ struct drm_i915_private *dev_priv = dev->dev_private;
+ u32 dpa_ctl;
+
+ dpa_ctl = I915_READ(DP_A);
+ dpa_ctl |= DP_PLL_ENABLE;
+ I915_WRITE(DP_A, dpa_ctl);
+ udelay(200);
+}
+
+static void intel_dp_prepare(struct drm_encoder *encoder)
+{
+ struct intel_encoder *intel_encoder = enc_to_intel_encoder(encoder);
+ struct intel_dp_priv *dp_priv = intel_encoder->dev_priv;
+ struct drm_device *dev = encoder->dev;
+ struct drm_i915_private *dev_priv = dev->dev_private;
+ uint32_t dp_reg = I915_READ(dp_priv->output_reg);
+
+ if (IS_eDP(intel_encoder)) {
+ ironlake_edp_backlight_off(dev);
+ ironlake_edp_panel_on(dev);
+ ironlake_edp_pll_on(encoder);
+ }
+ if (dp_reg & DP_PORT_EN)
+ intel_dp_link_down(intel_encoder, dp_priv->DP);
+}
+
+static void intel_dp_commit(struct drm_encoder *encoder)
+{
+ struct intel_encoder *intel_encoder = enc_to_intel_encoder(encoder);
+ struct intel_dp_priv *dp_priv = intel_encoder->dev_priv;
+ struct drm_device *dev = encoder->dev;
+ struct drm_i915_private *dev_priv = dev->dev_private;
+ uint32_t dp_reg = I915_READ(dp_priv->output_reg);
+
+ if (!(dp_reg & DP_PORT_EN)) {
+ intel_dp_link_train(intel_encoder, dp_priv->DP,
+ dp_priv->link_configuration);
+ }
+ if (IS_eDP(intel_encoder))
+ ironlake_edp_backlight_on(dev);
+}
+
static void
intel_dp_dpms(struct drm_encoder *encoder, int mode)
{
@@ -816,6 +873,8 @@ intel_dp_dpms(struct drm_encoder *encoder, int mode)
if (dp_reg & DP_PORT_EN) {
intel_dp_link_down(intel_encoder, dp_priv->DP);
}
+ if (IS_eDP(intel_encoder))
+ ironlake_edp_pll_off(encoder);
} else {
if (!(dp_reg & DP_PORT_EN)) {
if (IS_eDP(intel_encoder))
@@ -1388,9 +1447,9 @@ intel_dp_destroy (struct drm_connector *connector)
static const struct drm_encoder_helper_funcs intel_dp_helper_funcs = {
.dpms = intel_dp_dpms,
.mode_fixup = intel_dp_mode_fixup,
- .prepare = intel_encoder_prepare,
+ .prepare = intel_dp_prepare,
.mode_set = intel_dp_mode_set,
- .commit = intel_encoder_commit,
+ .commit = intel_dp_commit,
};
static const struct drm_connector_funcs intel_dp_connector_funcs = {
--
1.7.0.4
More information about the Intel-gfx
mailing list