[Intel-gfx] [PATCH 1/4] drm/i915: add pipe enable/disable functions
Jesse Barnes
jbarnes at virtuousgeek.org
Thu Dec 30 22:16:29 CET 2010
These allow us to check for pipe enable/disable requirements at
enable/disable time (e.g. plane status, pll status, etc.).
Signed-off-by: Jesse Barnes <jbarnes at virtuousgeek.org>
---
drivers/gpu/drm/i915/intel_display.c | 180 ++++++++++++++++++++++++++--------
1 files changed, 137 insertions(+), 43 deletions(-)
diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c
index 6313076..559e342 100644
--- a/drivers/gpu/drm/i915/intel_display.c
+++ b/drivers/gpu/drm/i915/intel_display.c
@@ -1058,6 +1058,136 @@ void intel_wait_for_pipe_off(struct drm_device *dev, int pipe)
}
}
+enum state {
+ off = 0,
+ on = 1,
+};
+
+static char *state_string(enum state enabled)
+{
+ return (enabled ? "on" : "off");
+}
+
+/* Only for pre-ILK configs */
+static void assert_pll(struct drm_i915_private *dev_priv, enum pipe pipe,
+ enum state state)
+{
+ int reg;
+ u32 val;
+ bool cur_state;
+
+ reg = DPLL(pipe);
+ val = I915_READ(reg);
+ cur_state = !!(val & DPLL_VCO_ENABLE);
+ WARN(cur_state != state,
+ "PLL state assertion failure (expected %s, current %s)\n",
+ state_string(state), state_string(cur_state));
+}
+#define assert_pll_enabled(d, p) assert_pll(d, p, on)
+#define assert_pll_disabled(d, p) assert_pll(d, p, off)
+
+static void assert_plane_enabled(struct drm_i915_private *dev_priv,
+ enum plane plane)
+{
+ int reg;
+ u32 val;
+
+ reg = DSPCNTR(plane);
+ val = I915_READ(reg);
+ WARN(!(val & DISPLAY_PLANE_ENABLE),
+ "plane %c assertion failure, should be active but is disabled\n",
+ plane ? 'B' : 'A');
+}
+
+static void assert_planes_disabled(struct drm_i915_private *dev_priv,
+ enum pipe pipe)
+{
+ int reg, i;
+ u32 val;
+ int cur_pipe;
+
+ /* Need to check both planes against the pipe */
+ for (i = 0; i < 2; i++) {
+ reg = DSPCNTR(i);
+ val = I915_READ(reg);
+ cur_pipe = (val & DISPPLANE_SEL_PIPE_MASK) >>
+ DISPPLANE_SEL_PIPE_SHIFT;
+ WARN((val & DISPLAY_PLANE_ENABLE) && pipe == cur_pipe,
+ "plane %d assertion failure, should be off on pipe %c but is still active\n",
+ i, pipe ? 'B' : 'A');
+ }
+}
+
+/**
+ * intel_enable_pipe - enable a pipe, assertiing requirements
+ * @dev_priv: i915 private structure
+ * @pipe: pipe to enable
+ *
+ * Enable @pipe, making sure that various hardware specific requirements
+ * are met, if applicable, e.g. PLL enabled, LVDS pairs enabled, etc.
+ *
+ * @pipe should be %PIPE_A or %PIPE_B.
+ *
+ * Will wait until the pipe is actually running (i.e. first vblank) before
+ * returning.
+ */
+static void intel_enable_pipe(struct drm_i915_private *dev_priv, enum pipe pipe)
+{
+ int reg;
+ u32 val;
+
+ /*
+ * A pipe without a PLL won't actually be able to drive bits from
+ * a plane. On ILK+ the pipe PLLs are integrated, so we don't
+ * need the check.
+ */
+ if (!HAS_PCH_SPLIT(dev_priv->dev))
+ assert_pll_enabled(dev_priv, pipe);
+
+ reg = PIPECONF(pipe);
+ val = I915_READ(reg);
+ val |= PIPECONF_ENABLE;
+ I915_WRITE(reg, val);
+ POSTING_READ(reg);
+ intel_wait_for_vblank(dev_priv->dev, pipe);
+}
+
+/**
+ * intel_disable_pipe - disable a pipe, assertiing requirements
+ * @dev_priv: i915 private structure
+ * @pipe: pipe to disable
+ *
+ * Disable @pipe, making sure that various hardware specific requirements
+ * are met, if applicable, e.g. plane disabled, panel fitter off, etc.
+ *
+ * @pipe should be %PIPE_A or %PIPE_B.
+ *
+ * Will wait until the pipe has shut down before returning.
+ */
+static void intel_disable_pipe(struct drm_i915_private *dev_priv,
+ enum pipe pipe)
+{
+ int reg;
+ u32 val;
+
+ /*
+ * Make sure planes won't keep trying to pump pixels to us,
+ * or we might hang the display.
+ */
+ assert_planes_disabled(dev_priv, pipe);
+
+ /* Don't disable pipe A or pipe A PLLs if needed */
+ if (pipe == PIPE_A && (dev_priv->quirks & QUIRK_PIPEA_FORCE))
+ return;
+
+ reg = PIPECONF(pipe);
+ val = I915_READ(reg);
+ val &= ~PIPECONF_ENABLE;
+ I915_WRITE(reg, val);
+ POSTING_READ(reg);
+ intel_wait_for_pipe_off(dev_priv->dev, pipe);
+}
+
static void i8xx_enable_fbc(struct drm_crtc *crtc, unsigned long interval)
{
struct drm_device *dev = crtc->dev;
@@ -2062,14 +2192,7 @@ static void ironlake_crtc_enable(struct drm_crtc *crtc)
dev_priv->pch_pf_size);
}
- /* Enable CPU pipe */
- reg = PIPECONF(pipe);
- temp = I915_READ(reg);
- if ((temp & PIPECONF_ENABLE) == 0) {
- I915_WRITE(reg, temp | PIPECONF_ENABLE);
- POSTING_READ(reg);
- intel_wait_for_vblank(dev, intel_crtc->pipe);
- }
+ intel_enable_pipe(dev_priv, pipe);
/* configure and enable CPU plane */
reg = DSPCNTR(plane);
@@ -2197,15 +2320,7 @@ static void ironlake_crtc_disable(struct drm_crtc *crtc)
dev_priv->display.disable_fbc)
dev_priv->display.disable_fbc(dev);
- /* disable cpu pipe, disable after all planes disabled */
- reg = PIPECONF(pipe);
- temp = I915_READ(reg);
- if (temp & PIPECONF_ENABLE) {
- I915_WRITE(reg, temp & ~PIPECONF_ENABLE);
- POSTING_READ(reg);
- /* wait for cpu pipe off, pipe state */
- intel_wait_for_pipe_off(dev, intel_crtc->pipe);
- }
+ intel_disable_pipe(dev_priv, pipe);
if (intel_pipe_has_type(crtc, INTEL_OUTPUT_DISPLAYPORT) || HAS_eDP)
I915_WRITE(PCH_DP_D, I915_READ(PCH_DP_D) & ~DP_PORT_EN);
@@ -2403,11 +2518,7 @@ static void i9xx_crtc_enable(struct drm_crtc *crtc)
udelay(150);
}
- /* Enable the pipe */
- reg = PIPECONF(pipe);
- temp = I915_READ(reg);
- if ((temp & PIPECONF_ENABLE) == 0)
- I915_WRITE(reg, temp | PIPECONF_ENABLE);
+ intel_enable_pipe(dev_priv, pipe);
/* Enable the plane */
reg = DSPCNTR(plane);
@@ -2464,16 +2575,7 @@ static void i9xx_crtc_disable(struct drm_crtc *crtc)
if (pipe == 0 && (dev_priv->quirks & QUIRK_PIPEA_FORCE))
goto done;
- /* Next, disable display pipes */
- reg = PIPECONF(pipe);
- temp = I915_READ(reg);
- if (temp & PIPECONF_ENABLE) {
- I915_WRITE(reg, temp & ~PIPECONF_ENABLE);
-
- /* Wait for the pipe to turn off */
- POSTING_READ(reg);
- intel_wait_for_pipe_off(dev, pipe);
- }
+ intel_disable_pipe(dev_priv, pipe);
reg = DPLL(pipe);
temp = I915_READ(reg);
@@ -4215,7 +4317,6 @@ static int intel_crtc_mode_set(struct drm_crtc *crtc,
if (!HAS_PCH_SPLIT(dev)) {
dspcntr |= DISPLAY_PLANE_ENABLE;
- pipeconf |= PIPECONF_ENABLE;
dpll |= DPLL_VCO_ENABLE;
}
@@ -4426,6 +4527,8 @@ static int intel_crtc_mode_set(struct drm_crtc *crtc,
I915_WRITE(PIPECONF(pipe), pipeconf);
POSTING_READ(PIPECONF(pipe));
+ if (!HAS_PCH_SPLIT(dev))
+ intel_enable_pipe(dev_priv, pipe);
intel_wait_for_vblank(dev, pipe);
@@ -5579,16 +5682,7 @@ static void intel_sanitize_modesetting(struct drm_device *dev,
if (IS_GEN2(dev))
intel_wait_for_vblank(dev, pipe);
- if (pipe == 0 && (dev_priv->quirks & QUIRK_PIPEA_FORCE))
- return;
-
- /* Switch off the pipe. */
- reg = PIPECONF(pipe);
- val = I915_READ(reg);
- if (val & PIPECONF_ENABLE) {
- I915_WRITE(reg, val & ~PIPECONF_ENABLE);
- intel_wait_for_pipe_off(dev, pipe);
- }
+ intel_disable_pipe(dev_priv, pipe);
}
static void intel_crtc_init(struct drm_device *dev, int pipe)
--
1.7.0.4
More information about the Intel-gfx
mailing list