[Intel-gfx] [PATCH] drm/i915: be sure panel is powered up in eDP configs

[Keith Packard]

On Wed, 14 Jul 2010 15:40:56 -0700, Jesse Barnes <jbarnes at virtuousgeek.org> wrote:
> Fixes https://bugs.freedesktop.org/show_bug.cgi?id=28739.  We need to
> enable power to the panel with the AUX VDD bit in order to properly
> detect the eDP attached panel, and we also need to turn the panel on in
> case it was off when we started (as happens at resume time).
> 
> But this patch raises a couple of questions:
>   1) why does the first panel on sequence time out?
>   2) why do I need to unlock the panel protected regs?
> 
> Keith, I think this is your code, any ideas?

I just wrote the DP code, not the eDP code. I haven't any idea why the
panel on sequence is timing out, although I note that you unlock the
panel regs after turning it on...

-- 
keith.packard at intel.com
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 189 bytes
Desc: not available
URL: <http://lists.freedesktop.org/archives/intel-gfx/attachments/20100714/f00bee62/attachment.sig>