[Intel-gfx] Modesetting bug on 945GSE (Atom N270) with Chris Wilson drm-intel-next kernel
Simon Farnsworth
simon.farnsworth at onelan.co.uk
Mon Nov 22 12:42:16 CET 2010
On Monday 22 November 2010, Chris Wilson <chris at chris-wilson.co.uk> wrote:
> On Mon, 22 Nov 2010 10:58:48 +0000, Simon Farnsworth
<simon.farnsworth at onelan.co.uk> wrote:
> > On Monday 22 November 2010, Chris Wilson <chris at chris-wilson.co.uk> wrote:
> > > The usual perf cpu profiling and latency charts would be interesting.
> >
> > The reason for moving to new bits is perf and sysprof telling me that I'm
> > probably out of CPU (one hyperthread fully utilised, the other always in
> > use to some extent).
> >
> > What perf profiling and latency charts are interesting? I've been using
> > sysprof to try and get myself below 100% CPU, but I'd love to add more
> > tools to my toolbox.
>
> In theory, we should be able to gather quite a bit of interesting
> information for analysing deadlines from using perf timechart in
> conjunction with i915:i915_gem_request_wait_begin,
> i915:i915_flip_request, i915:i915_flip_complete. Just needs a lot more
> effort for useful analysis.
>
If I continue to have performance problems on 945 (seems likely, given the CPU
Intel pair it with), I may look into this.
>
> Mind also grabbing a drm.debug=0xe from a sane startup. Aside from a
> silliness with attempting to use a HDMI command on a non-HDMI capable
> connector, there was nothing outlandish in that dmesg that I could spot.
> Hmm, I'll send a patch for that at least.
> -Chris
Attached as dmesg-good-DVI.txt; note that this is from a Fedora kernel, so may
not diff neatly against the output of the failing modeset.
--
Simon Farnsworth
Software Engineer
ONELAN Limited
http://www.onelan.com/
-------------- next part --------------
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Linux version 2.6.34.1-101.tv.pf.fc13.i686.PAE (mockbuild at f12simon) (gcc version 4.4.4 20100630 (Red Hat 4.4.4-10) (GCC) ) #1 SMP Thu Oct 28 15:36:50 BST 2010
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009d800 (usable)
BIOS-e820: 000000000009d800 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000003f4b5000 (usable)
BIOS-e820: 000000003f4b5000 - 000000003f4e0000 (ACPI NVS)
BIOS-e820: 000000003f4e0000 - 000000003f5fe000 (reserved)
BIOS-e820: 000000003f5fe000 - 000000003f5ff000 (usable)
BIOS-e820: 000000003f5ff000 - 000000003f600000 (ACPI NVS)
BIOS-e820: 000000003f600000 - 000000003f608000 (ACPI data)
BIOS-e820: 000000003f608000 - 000000003f60e000 (ACPI NVS)
BIOS-e820: 000000003f60e000 - 000000003f62b000 (reserved)
BIOS-e820: 000000003f62b000 - 000000003f700000 (usable)
BIOS-e820: 00000000e0000000 - 00000000ffc00000 (reserved)
BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved)
NX (Execute Disable) protection: active
DMI 2.6 present.
e820 update range: 0000000000000000 - 0000000000001000 (usable) ==> (reserved)
e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
last_pfn = 0x3f700 max_arch_pfn = 0x1000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-E7FFF uncachable
E8000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 000000000 mask 0C0000000 write-back
1 base 03F700000 mask 0FFF00000 uncachable
2 base 03F800000 mask 0FF800000 uncachable
3 disabled
4 disabled
5 disabled
6 disabled
7 disabled
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
original variable MTRRs
reg 0, base: 0GB, range: 1GB, type WB
reg 1, base: 1015MB, range: 1MB, type UC
reg 2, base: 1016MB, range: 8MB, type UC
total RAM covered: 1015M
Found optimal setting for mtrr clean up
gran_size: 64K chunk_size: 16M num_reg: 3 lose cover RAM: 0G
New variable MTRRs
reg 0, base: 0GB, range: 1GB, type WB
reg 1, base: 1015MB, range: 1MB, type UC
reg 2, base: 1016MB, range: 8MB, type UC
initial memory mapped : 0 - 01000000
init_memory_mapping: 0000000000000000-00000000375fe000
0000000000 - 0000200000 page 4k
0000200000 - 0037400000 page 2M
0037400000 - 00375fe000 page 4k
kernel direct mapping tables up to 375fe000 @ 7000-f000
RAMDISK: 37505000 - 37ff0000
Allocated new RAMDISK: 00b69000 - 01653319
Move RAMDISK from 0000000037505000 - 0000000037fef318 to 00b69000 - 01653318
ACPI: RSDP 000f0400 00024 (v02 INTEL )
ACPI: XSDT 3f606f10 00044 (v01 INTEL D945JT 06222004 MSFT 00010013)
ACPI: FACP 3f605d90 000F4 (v04 INTEL D945JT 06222004 MSFT 00010013)
ACPI Warning: 32/64 FACS address mismatch in FADT - two FACS tables! (20100121/tbfadt-369)
ACPI Warning: 32/64X FACS address mismatch in FADT - 3F60DE40/000000003F60DD40, using 32 (20100121/tbfadt-486)
ACPI: DSDT 3f600010 0416D (v01 INTEL D945JT 00000000 INTL 20051117)
ACPI: FACS 3f60de40 00040
ACPI: APIC 3f607e90 0005C (v02 INTEL D945JT 06222004 MSFT 00010013)
ACPI: MCFG 3f607e10 0003C (v01 INTEL D945JT 06222004 MSFT 00000097)
ACPI: HPET 3f607d90 00038 (v01 INTEL D945JT 06222004 AMI. 00000003)
ACPI: Local APIC address 0xfee00000
129MB HIGHMEM available.
885MB LOWMEM available.
mapped low ram: 0 - 375fe000
low ram: 0 - 375fe000
node 0 low ram: 00000000 - 375fe000
node 0 bootmap 0000b000 - 00011ec0
(9/32 early reservations) ==> bootmem [0000000000 - 00375fe000]
#0 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000]
#1 [0000400000 - 0000b5f030] TEXT DATA BSS ==> [0000400000 - 0000b5f030]
#2 [000009d800 - 0000100000] BIOS reserved ==> [000009d800 - 0000100000]
#3 [0000b60000 - 0000b681d9] BRK ==> [0000b60000 - 0000b681d9]
#4 [0000002000 - 0000003000] TRAMPOLINE ==> [0000002000 - 0000003000]
#5 [0000003000 - 0000007000] ACPI WAKEUP ==> [0000003000 - 0000007000]
#6 [0000007000 - 000000b000] PGTABLE ==> [0000007000 - 000000b000]
#7 [0000b69000 - 0001654000] NEW RAMDISK ==> [0000b69000 - 0001654000]
#8 [000000b000 - 0000012000] BOOTMAP ==> [000000b000 - 0000012000]
Zone PFN ranges:
DMA 0x00000001 -> 0x00001000
Normal 0x00001000 -> 0x000375fe
HighMem 0x000375fe -> 0x0003f700
Movable zone start PFN for each node
early_node_map[4] active PFN ranges
0: 0x00000001 -> 0x0000009d
0: 0x00000100 -> 0x0003f4b5
0: 0x0003f5fe -> 0x0003f5ff
0: 0x0003f62b -> 0x0003f700
On node 0 totalpages: 259367
free_area_init_node: node 0, pgdat c09d1380, node_mem_map c1655020
DMA zone: 32 pages used for memmap
DMA zone: 0 pages reserved
DMA zone: 3964 pages, LIFO batch:0
Normal zone: 1740 pages used for memmap
Normal zone: 220978 pages, LIFO batch:31
HighMem zone: 259 pages used for memmap
HighMem zone: 32394 pages, LIFO batch:7
Using APIC driver default
ACPI: PM-Timer IO Port: 0x408
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a201 base: 0xfed00000
SMP: Allowing 2 CPUs, 0 hotplug CPUs
nr_irqs_gsi: 24
PM: Registered nosave memory: 000000000009d000 - 000000000009e000
PM: Registered nosave memory: 000000000009e000 - 00000000000a0000
PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
Allocating PCI resources starting at 3f700000 (gap: 3f700000:a0900000)
Booting paravirtualized kernel on bare hardware
setup_percpu: NR_CPUS:32 nr_cpumask_bits:32 nr_cpu_ids:2 nr_node_ids:1
PERCPU: Embedded 15 pages/cpu @c2000000 s37716 r0 d23724 u1048576
pcpu-alloc: s37716 r0 d23724 u1048576 alloc=1*2097152
pcpu-alloc: [0] 0 1
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 257336
Kernel command line: ro root=/dev/NTBgroup/System2 qqquiet video=1024x768 at 60e,SVIDEO-1:1024x768d drm.debug=0xe
PID hash table entries: 4096 (order: 2, 16384 bytes)
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Initializing CPU#0
allocated 5196780 bytes of page_cgroup
please try 'cgroup_disable=memory' option if you don't want memory cgroups
Initializing HighMem for node 0 (000375fe:0003f700)
Memory: 1004516k/1039360k available (3740k kernel code, 32952k reserved, 2342k data, 568k init, 130612k highmem)
virtual kernel memory layout:
fixmap : 0xffad5000 - 0xfffff000 (5288 kB)
pkmap : 0xff600000 - 0xff800000 (2048 kB)
vmalloc : 0xf7dfe000 - 0xff5fe000 ( 120 MB)
lowmem : 0xc0000000 - 0xf75fe000 ( 885 MB)
.init : 0xc09f1000 - 0xc0a7f000 ( 568 kB)
.data : 0xc07a73d6 - 0xc09f0d78 (2342 kB)
.text : 0xc0400000 - 0xc07a73d6 (3740 kB)
Checking if this processor honours the WP bit even in supervisor mode...Ok.
SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
Hierarchical RCU implementation.
NR_IRQS:1280
Extended CMOS year: 2000
Console: colour VGA+ 80x25
console [tty0] enabled
hpet clockevent registered
Fast TSC calibration using PIT
spurious 8259A interrupt: IRQ7.
Detected 1596.163 MHz processor.
Calibrating delay loop (skipped), value calculated using timer frequency.. 3192.32 BogoMIPS (lpj=1596163)
Security Framework initialized
SELinux: Initializing.
SELinux: Starting in permissive mode
Mount-cache hash table entries: 512
Initializing cgroup subsys ns
Initializing cgroup subsys cpuacct
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys net_cls
Initializing cgroup subsys blkio
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 5 MCE banks
CPU0: Thermal monitoring enabled (TM2)
using mwait in idle threads.
Performance Events: Atom events, Intel PMU driver.
... version: 3
... bit width: 40
... generic registers: 2
... value mask: 000000ffffffffff
... max period: 000000007fffffff
... fixed-purpose events: 3
... event mask: 0000000700000003
Checking 'hlt' instruction... OK.
ACPI: Core revision 20100121
ftrace: converting mcount calls to 0f 1f 44 00 00
ftrace: allocating 20159 entries in 40 pages
Enabling APIC mode: Flat. Using 1 I/O APICs
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=0 pin2=0
CPU0: Intel(R) Atom(TM) CPU N270 @ 1.60GHz stepping 02
Booting Node 0, Processors #1 Ok.
Initializing CPU#1
Brought up 2 CPUs
Total of 2 processors activated (6384.17 BogoMIPS).
sizeof(vma)=88 bytes
sizeof(page)=32 bytes
sizeof(inode)=352 bytes
sizeof(dentry)=132 bytes
sizeof(ext3inode)=508 bytes
sizeof(buffer_head)=56 bytes
sizeof(skbuff)=184 bytes
sizeof(task_struct)=3264 bytes
devtmpfs: initialized
Time: 11:39:32 Date: 11/22/10
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
PCI: Using MMCONFIG for extended config space
PCI: Using configuration type 1 for base access
bio: create slab <bio-0> at 0
ACPI: EC: Look up EC in DSDT
ACPI: Executed 1 blocks of module-level executable AML code
ACPI: BIOS _OSI(Linux) query ignored
ACPI: Interpreter enabled
ACPI: (supports S0 S1 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
ACPI: BIOS _OSI(Linux) query ignored
ACPI: No dock devices found.
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: PCI Root Bridge [PCI0] (0000:00)
pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7]
pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff]
pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff]
pci_root PNP0A08:00: host bridge window [mem 0x000c0000-0x000fffff]
pci_root PNP0A08:00: host bridge window [mem 0x40000000-0xffffffff]
pci 0000:00:02.0: reg 10: [mem 0xdfe80000-0xdfefffff]
pci 0000:00:02.0: reg 14: [io 0xf150-0xf157]
pci 0000:00:02.0: reg 18: [mem 0xc0000000-0xcfffffff pref]
pci 0000:00:02.0: reg 1c: [mem 0xdff00000-0xdff3ffff]
pci 0000:00:02.1: reg 10: [mem 0xdfe00000-0xdfe7ffff]
pci 0000:00:1b.0: reg 10: [mem 0xffe00000-0xffe03fff 64bit]
pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1b.0: PME# disabled
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: PME# disabled
pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.1: PME# disabled
pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.2: PME# disabled
pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.3: PME# disabled
pci 0000:00:1d.0: reg 20: [io 0xf0a0-0xf0bf]
pci 0000:00:1d.1: reg 20: [io 0xf080-0xf09f]
pci 0000:00:1d.2: reg 20: [io 0xf060-0xf07f]
pci 0000:00:1d.3: reg 20: [io 0xf040-0xf05f]
pci 0000:00:1d.7: reg 10: [mem 0xdff41000-0xdff413ff]
pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.7: PME# disabled
pci 0000:00:1f.0: quirk: [io 0x0400-0x047f] claimed by ICH6 ACPI/GPIO/TCO
pci 0000:00:1f.0: quirk: [io 0x0500-0x053f] claimed by ICH6 GPIO
pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0a00 (mask 007f)
pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at 1640 (mask 000f)
pci 0000:00:1f.1: reg 10: [io 0xf140-0xf147]
pci 0000:00:1f.1: reg 14: [io 0xf130-0xf133]
pci 0000:00:1f.1: reg 18: [io 0xf120-0xf127]
pci 0000:00:1f.1: reg 1c: [io 0xf110-0xf113]
pci 0000:00:1f.1: reg 20: [io 0xf100-0xf10f]
pci 0000:00:1f.2: reg 10: [io 0xf0f0-0xf0f7]
pci 0000:00:1f.2: reg 14: [io 0xf0e0-0xf0e3]
pci 0000:00:1f.2: reg 18: [io 0xf0d0-0xf0d7]
pci 0000:00:1f.2: reg 1c: [io 0xf0c0-0xf0c3]
pci 0000:00:1f.2: reg 20: [io 0xf020-0xf03f]
pci 0000:00:1f.2: reg 24: [mem 0xdff40000-0xdff403ff]
pci 0000:00:1f.2: PME# supported from D3hot
pci 0000:00:1f.2: PME# disabled
pci 0000:00:1f.3: reg 20: [io 0x1180-0x119f]
pci 0000:01:00.0: reg 10: [io 0xe000-0xe0ff]
pci 0000:01:00.0: reg 18: [mem 0xffd04000-0xffd04fff 64bit pref]
pci 0000:01:00.0: reg 20: [mem 0xffd00000-0xffd03fff 64bit pref]
pci 0000:01:00.0: reg 30: [mem 0x00000000-0x0001ffff pref]
pci 0000:01:00.0: supports D1 D2
pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:01:00.0: PME# disabled
pci 0000:00:1c.0: PCI bridge to [bus 01-01]
pci 0000:00:1c.0: bridge window [io 0xe000-0xefff]
pci 0000:00:1c.0: bridge window [mem 0xdfd00000-0xdfdfffff]
pci 0000:00:1c.0: bridge window [mem 0xffd00000-0xffdfffff 64bit pref]
pci 0000:02:00.0: reg 10: [mem 0xdfc00000-0xdfc0ffff 64bit]
pci 0000:02:00.0: supports D1
pci 0000:02:00.0: PME# supported from D0 D1 D3hot D3cold
pci 0000:02:00.0: PME# disabled
pci 0000:00:1c.1: PCI bridge to [bus 02-02]
pci 0000:00:1c.1: bridge window [io 0xf000-0x0000] (disabled)
pci 0000:00:1c.1: bridge window [mem 0xdfc00000-0xdfcfffff]
pci 0000:00:1c.1: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
pci 0000:00:1c.2: PCI bridge to [bus 03-03]
pci 0000:00:1c.2: bridge window [io 0xf000-0x0000] (disabled)
pci 0000:00:1c.2: bridge window [mem 0xfff00000-0x000fffff] (disabled)
pci 0000:00:1c.2: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
pci 0000:00:1c.3: PCI bridge to [bus 04-04]
pci 0000:00:1c.3: bridge window [io 0xf000-0x0000] (disabled)
pci 0000:00:1c.3: bridge window [mem 0xfff00000-0x000fffff] (disabled)
pci 0000:00:1c.3: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
pci 0000:00:1e.0: PCI bridge to [bus 05-05] (subtractive decode)
pci 0000:00:1e.0: bridge window [io 0xf000-0x0000] (disabled)
pci 0000:00:1e.0: bridge window [mem 0xfff00000-0x000fffff] (disabled)
pci 0000:00:1e.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode)
pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0x000c0000-0x000fffff] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0x40000000-0xffffffff] (subtractive decode)
pci_bus 0000:00: on NUMA node 0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P4._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P5._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 *7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 *10 11 12 14 15)
vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
SCSI subsystem initialized
libata version 3.00 loaded.
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
reserve RAM buffer: 000000000009d800 - 000000000009ffff
reserve RAM buffer: 000000003f4b5000 - 000000003fffffff
reserve RAM buffer: 000000003f5ff000 - 000000003fffffff
reserve RAM buffer: 000000003f700000 - 000000003fffffff
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
HPET: 3 timers in total, 0 timers will be used for per-cpu timer
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
hpet0: 3 comparators, 64-bit 14.318180 MHz counter
Switching to clocksource tsc
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp: PnP ACPI: found 14 devices
ACPI: ACPI bus type pnp unregistered
system 00:01: [mem 0xfed14000-0xfed17fff] has been reserved
system 00:01: [mem 0xfed19000-0xfed19fff] has been reserved
system 00:01: [mem 0xfed18000-0xfed18fff] has been reserved
system 00:01: [mem 0xe0000000-0xefffffff] has been reserved
system 00:01: [mem 0xff000000-0xffffffff] could not be reserved
system 00:09: [io 0x04d0-0x04d1] has been reserved
system 00:0b: [io 0xfff0-0xffff] has been reserved
system 00:0b: [io 0xffff] has been reserved
system 00:0b: [io 0xffff] has been reserved
system 00:0b: [io 0x06a0-0x06a7] has been reserved
system 00:0c: [io 0x0400-0x047f] has been reserved
system 00:0c: [io 0x1180-0x119f] has been reserved
system 00:0c: [io 0x0500-0x053f] has been reserved
system 00:0c: [mem 0xfec00000-0xfec00fff] could not be reserved
system 00:0c: [mem 0xfee00000-0xfee00fff] has been reserved
system 00:0c: [mem 0xfed20000-0xfed23fff] has been reserved
system 00:0c: [mem 0xffb00000-0xffbfffff] has been reserved
system 00:0c: [mem 0xfc800400-0xfc800fff] has been reserved
pci 0000:01:00.0: BAR 6: assigned [mem 0xffd20000-0xffd3ffff pref]
pci 0000:00:1c.0: PCI bridge to [bus 01-01]
pci 0000:00:1c.0: bridge window [io 0xe000-0xefff]
pci 0000:00:1c.0: bridge window [mem 0xdfd00000-0xdfdfffff]
pci 0000:00:1c.0: bridge window [mem 0xffd00000-0xffdfffff 64bit pref]
pci 0000:00:1c.1: PCI bridge to [bus 02-02]
pci 0000:00:1c.1: bridge window [io disabled]
pci 0000:00:1c.1: bridge window [mem 0xdfc00000-0xdfcfffff]
pci 0000:00:1c.1: bridge window [mem pref disabled]
pci 0000:00:1c.2: PCI bridge to [bus 03-03]
pci 0000:00:1c.2: bridge window [io disabled]
pci 0000:00:1c.2: bridge window [mem disabled]
pci 0000:00:1c.2: bridge window [mem pref disabled]
pci 0000:00:1c.3: PCI bridge to [bus 04-04]
pci 0000:00:1c.3: bridge window [io disabled]
pci 0000:00:1c.3: bridge window [mem disabled]
pci 0000:00:1c.3: bridge window [mem pref disabled]
pci 0000:00:1e.0: PCI bridge to [bus 05-05]
pci 0000:00:1e.0: bridge window [io disabled]
pci 0000:00:1e.0: bridge window [mem disabled]
pci 0000:00:1e.0: bridge window [mem pref disabled]
pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:1c.0: setting latency timer to 64
pci 0000:00:1c.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
pci 0000:00:1c.1: setting latency timer to 64
pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
pci 0000:00:1c.2: setting latency timer to 64
pci 0000:00:1c.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19
pci 0000:00:1c.3: setting latency timer to 64
pci 0000:00:1e.0: setting latency timer to 64
pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000fffff]
pci_bus 0000:00: resource 8 [mem 0x40000000-0xffffffff]
pci_bus 0000:01: resource 0 [io 0xe000-0xefff]
pci_bus 0000:01: resource 1 [mem 0xdfd00000-0xdfdfffff]
pci_bus 0000:01: resource 2 [mem 0xffd00000-0xffdfffff 64bit pref]
pci_bus 0000:02: resource 1 [mem 0xdfc00000-0xdfcfffff]
pci_bus 0000:05: resource 4 [io 0x0000-0x0cf7]
pci_bus 0000:05: resource 5 [io 0x0d00-0xffff]
pci_bus 0000:05: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:05: resource 7 [mem 0x000c0000-0x000fffff]
pci_bus 0000:05: resource 8 [mem 0x40000000-0xffffffff]
NET: Registered protocol family 2
IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP reno registered
UDP hash table entries: 512 (order: 2, 16384 bytes)
UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
NET: Registered protocol family 1
pci 0000:00:02.0: Boot video device
pci 0000:00:1d.7: EHCI: BIOS handoff failed (BIOS bug?) 01010001
PCI: CLS 64 bytes, default 64
Trying to unpack rootfs image as initramfs...
Freeing initrd memory: 11180k freed
apm: BIOS not found.
audit: initializing netlink socket (disabled)
type=2000 audit(1290425973.049:1): initialized
highmem bounce pool size: 64 pages
HugeTLB registered 2 MB page size, pre-allocated 0 pages
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
msgmni has been set to 1728
SELinux: Registering netfilter hooks
alg: No test for stdrng (krng)
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
pcieport 0000:00:1c.0: setting latency timer to 64
pcieport 0000:00:1c.0: irq 24 for MSI/MSI-X
pcieport 0000:00:1c.1: setting latency timer to 64
pcieport 0000:00:1c.1: irq 25 for MSI/MSI-X
pcieport 0000:00:1c.2: setting latency timer to 64
pcieport 0000:00:1c.2: irq 26 for MSI/MSI-X
pcieport 0000:00:1c.3: setting latency timer to 64
pcieport 0000:00:1c.3: irq 27 for MSI/MSI-X
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
pci-stub: invalid id string ""
input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
ACPI: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
ACPI: Power Button [PWRF]
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Non-volatile memory driver v1.3
Linux agpgart interface v0.103
agpgart-intel 0000:00:00.0: Intel 945GME Chipset
agpgart-intel 0000:00:00.0: detected 7932K stolen memory
agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xc0000000
Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
00:03: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
00:04: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
brd: module loaded
loop: module loaded
ahci 0000:00:1f.2: version 3.0
ahci 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
ahci 0000:00:1f.2: irq 28 for MSI/MSI-X
ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 4 ports 1.5 Gbps 0x5 impl SATA mode
ahci 0000:00:1f.2: flags: 64bit ncq led clo pio slum part
ahci 0000:00:1f.2: setting latency timer to 64
scsi0 : ahci
scsi1 : ahci
scsi2 : ahci
scsi3 : ahci
ata1: SATA max UDMA/133 irq_stat 0x00400040, connection status changed irq 28
ata2: DUMMY
ata3: SATA max UDMA/133 abar m1024 at 0xdff40000 port 0xdff40200 irq 28
ata4: DUMMY
ata_piix 0000:00:1f.1: version 2.13
ata_piix 0000:00:1f.1: PCI INT A -> GSI 18 (level, low) -> IRQ 18
ata_piix 0000:00:1f.1: setting latency timer to 64
scsi4 : ata_piix
scsi5 : ata_piix
ata5: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xf100 irq 14
ata6: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xf108 irq 15
Fixed MDIO Bus: probed
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
ehci_hcd 0000:00:1d.7: setting latency timer to 64
ehci_hcd 0000:00:1d.7: EHCI Host Controller
ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:1d.7: using broken periodic workaround
ehci_hcd 0000:00:1d.7: debug port 1
ehci_hcd 0000:00:1d.7: cache line size of 64 is not supported
ehci_hcd 0000:00:1d.7: irq 23, io mem 0xdff41000
ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 2.6.34.1-101.tv.pf.fc13.i686.PAE ehci_hcd
usb usb1: SerialNumber: 0000:00:1d.7
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 8 ports detected
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
uhci_hcd: USB Universal Host Controller Interface driver
uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
uhci_hcd 0000:00:1d.0: setting latency timer to 64
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000f0a0
usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: UHCI Host Controller
usb usb2: Manufacturer: Linux 2.6.34.1-101.tv.pf.fc13.i686.PAE uhci_hcd
usb usb2: SerialNumber: 0000:00:1d.0
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
uhci_hcd 0000:00:1d.1: setting latency timer to 64
uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000f080
usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: UHCI Host Controller
usb usb3: Manufacturer: Linux 2.6.34.1-101.tv.pf.fc13.i686.PAE uhci_hcd
usb usb3: SerialNumber: 0000:00:1d.1
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
uhci_hcd 0000:00:1d.2: setting latency timer to 64
uhci_hcd 0000:00:1d.2: UHCI Host Controller
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000f060
usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: UHCI Host Controller
usb usb4: Manufacturer: Linux 2.6.34.1-101.tv.pf.fc13.i686.PAE uhci_hcd
usb usb4: SerialNumber: 0000:00:1d.2
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 16 (level, low) -> IRQ 16
uhci_hcd 0000:00:1d.3: setting latency timer to 64
uhci_hcd 0000:00:1d.3: UHCI Host Controller
uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
uhci_hcd 0000:00:1d.3: irq 16, io base 0x0000f040
usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb5: Product: UHCI Host Controller
usb usb5: Manufacturer: Linux 2.6.34.1-101.tv.pf.fc13.i686.PAE uhci_hcd
usb usb5: SerialNumber: 0000:00:1d.3
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
PNP: No PS/2 controller found. Probing ports directly.
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
rtc_cmos 00:07: RTC can wake from S4
rtc_cmos 00:07: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one year, y3k, 114 bytes nvram, hpet irqs
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.17.0-ioctl (2010-03-05) initialised: dm-devel at redhat.com
cpuidle: using governor ladder
cpuidle: using governor menu
usbcore: registered new interface driver hiddev
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
nf_conntrack version 0.5.0 (15870 buckets, 63480 max)
CONFIG_NF_CT_ACCT is deprecated and will be removed soon. Please use
nf_conntrack.acct=1 kernel parameter, acct=1 nf_conntrack module option or
sysctl net.netfilter.nf_conntrack_acct=1 to enable it.
ip_tables: (C) 2000-2006 Netfilter Core Team
TCP cubic registered
Initializing XFRM netlink socket
NET: Registered protocol family 17
Using IPI No-Shortcut mode
PM: Resume from disk failed.
registered taskstats version 1
No TPM chip found, activating TPM-bypass!
Magic number: 2:981:681
rtc_cmos 00:07: setting system clock to 2010-11-22 11:39:34 UTC (1290425974)
Initalizing network drop monitor service
ata3: SATA link down (SStatus 0 SControl 300)
usb 5-1: new low speed USB device using uhci_hcd and address 2
usb 5-1: New USB device found, idVendor=0a81, idProduct=0205
usb 5-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 5-1: Product: PS2 to USB Converter
usb 5-1: Manufacturer: CHESEN
input: CHESEN PS2 to USB Converter as /devices/pci0000:00/0000:00:1d.3/usb5/5-1/5-1:1.0/input/input2
generic-usb 0003:0A81:0205.0001: input,hidraw0: USB HID v1.10 Keyboard [CHESEN PS2 to USB Converter] on usb-0000:00:1d.3-1/input0
input: CHESEN PS2 to USB Converter as /devices/pci0000:00/0000:00:1d.3/usb5/5-1/5-1:1.1/input/input3
generic-usb 0003:0A81:0205.0002: input,hidraw1: USB HID v1.10 Mouse [CHESEN PS2 to USB Converter] on usb-0000:00:1d.3-1/input1
ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata1.00: ATA-8: ST9160310AS, SD03, max UDMA/133
ata1.00: 312581808 sectors, multi 16: LBA48 NCQ (depth 31/32)
ata1.00: configured for UDMA/133
scsi 0:0:0:0: Direct-Access ATA ST9160310AS SD03 PQ: 0 ANSI: 5
sd 0:0:0:0: Attached scsi generic sg0 type 0
sd 0:0:0:0: [sda] 312581808 512-byte logical blocks: (160 GB/149 GiB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
sda: sda1 sda2
sd 0:0:0:0: [sda] Attached SCSI disk
Freeing unused kernel memory: 568k freed
Write protecting the kernel text: 3744k
Write protecting the kernel read-only data: 1776k
dracut: dracut-005-3.fc13
udev: starting version 151
input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input4
ACPI: Video Device [IGD] (multi-head: yes rom: no post: no)
[drm] Initialized drm 1.1.0 20060810
i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
i915 0000:00:02.0: setting latency timer to 64
[drm:i915_init_phys_hws], Enabled hardware status page
[drm] set up 7M of stolen space
[drm:parse_general_definitions], crt_ddc_bus_pin: 2
[drm:parse_lfp_panel_data], Found panel mode in BIOS VBT tables:
[drm:drm_mode_debug_printmodeline], Modeline 0:"1440x900" 0 88750 1440 1488 1520 1600 900 903 909 926 0x8 0xa
[drm:parse_sdvo_device_mapping], the SDVO device with slave addr 70 is found on SDVOB port
[drm:intel_modeset_init], 2 display pipes available.
[drm:intel_crtc_init], swapping pipes & planes for FBC
[drm:intel_crtc_init], swapping pipes & planes for FBC
[drm:intel_lvds_init], LVDS is not present in VBT
[drm:intel_setup_outputs], probing SDVOB
[drm:intel_sdvo_debug_write], SDVOB: W: 02 (SDVO_CMD_GET_DEVICE_CAPS)
[drm:intel_sdvo_debug_response], SDVOB: R: 02 43 00 01 01 01 01 00 (Success)
[drm:intel_sdvo_debug_write], SDVOB: W: 9D (SDVO_CMD_GET_SUPP_ENCODE)
[drm:intel_sdvo_debug_response], SDVOB: R: 00 00 (Not supported)
[drm:intel_sdvo_debug_write], SDVOB: W: 10 00 (SDVO_CMD_SET_TARGET_INPUT)
[drm:intel_sdvo_debug_response], SDVOB: R: (Success)
[drm:intel_sdvo_debug_write], SDVOB: W: 1D (SDVO_CMD_GET_INPUT_PIXEL_CLOCK_RANGE)
[drm:intel_sdvo_debug_response], SDVOB: R: C4 09 20 4E (Success)
[drm:intel_sdvo_init], SDVOB device VID/DID: 02:43.00, clock range 25MHz - 200MHz, input 1: Y, input 2: N, output 1: Y, output 2: N
[drm:intel_setup_outputs], probing SDVOC
[drm:intel_sdvo_read_byte], i2c transfer returned -6
[drm:intel_sdvo_init], No SDVO device found on SDVOC
[drm] initialized overlay support
[drm:i915_driver_irq_handler], pipe a underrun
Slow work thread pool: Starting up
Slow work thread pool: Ready
[drm:intel_sdvo_debug_write], SDVOB: W: 05 00 00 (SDVO_CMD_SET_ACTIVE_OUTPUTS)
[drm:intel_sdvo_debug_response], SDVOB: R: (Success)
[drm:i915_get_vblank_counter], trying to get vblank count for disabled pipe 1
[drm:drm_helper_probe_single_connector_modes], VGA-1
[drm:drm_helper_probe_single_connector_modes], VGA-1 is disconnected
[drm:drm_helper_probe_single_connector_modes], DVI-D-1
[drm:intel_sdvo_debug_write], SDVOB: W: 0B (SDVO_CMD_GET_ATTACHED_DISPLAYS)
[drm:intel_sdvo_debug_response], SDVOB: R: 01 00 (Success)
[drm:intel_sdvo_detect], SDVO response 1 0
[drm:intel_sdvo_debug_write], SDVOB: W: 7A 02 (SDVO_CMD_SET_CONTROL_BUS_SWITCH)
[drm:intel_sdvo_debug_write], SDVOB: W: 7A 02 (SDVO_CMD_SET_CONTROL_BUS_SWITCH)
[drm:intel_sdvo_debug_write], SDVOB: W: 7A 02 (SDVO_CMD_SET_CONTROL_BUS_SWITCH)
[drm:intel_sdvo_debug_write], SDVOB: W: 7A 02 (SDVO_CMD_SET_CONTROL_BUS_SWITCH)
[drm:intel_sdvo_debug_write], SDVOB: W: 7A 02 (SDVO_CMD_SET_CONTROL_BUS_SWITCH)
[drm:intel_sdvo_debug_write], SDVOB: W: 7A 02 (SDVO_CMD_SET_CONTROL_BUS_SWITCH)
[drm:drm_mode_debug_printmodeline], Modeline 27:"1920x1080i" 0 74250 1920 2008 2052 2200 1080 1084 1094 1125 0x40 0x15
[drm:drm_mode_prune_invalid], Not using 1920x1080i mode 7
[drm:drm_helper_probe_single_connector_modes], Probed modes for DVI-D-1
[drm:drm_mode_debug_printmodeline], Modeline 25:"1920x1200" 60 154000 1920 1968 2000 2080 1200 1203 1209 1235 0x48 0x9
[drm:drm_mode_debug_printmodeline], Modeline 26:"1920x1080" 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x40 0x5
[drm:drm_mode_debug_printmodeline], Modeline 31:"1600x1200" 60 162000 1600 1664 1856 2160 1200 1201 1204 1250 0x40 0x5
[drm:drm_mode_debug_printmodeline], Modeline 37:"1280x1024" 75 135000 1280 1296 1440 1688 1024 1025 1028 1066 0x40 0x5
[drm:drm_mode_debug_printmodeline], Modeline 30:"1280x1024" 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x40 0x5
[drm:drm_mode_debug_printmodeline], Modeline 32:"1152x864" 75 108000 1152 1216 1344 1600 864 865 868 900 0x40 0x5
[drm:drm_mode_debug_printmodeline], Modeline 28:"1280x720" 60 74250 1280 1390 1430 1650 720 725 730 750 0x40 0x5
[drm:drm_mode_debug_printmodeline], Modeline 38:"1024x768" 75 78800 1024 1040 1136 1312 768 769 772 800 0x40 0x5
[drm:drm_mode_debug_printmodeline], Modeline 39:"1024x768" 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
[drm:drm_mode_debug_printmodeline], Modeline 40:"800x600" 75 49500 800 816 896 1056 600 601 604 625 0x40 0x5
[drm:drm_mode_debug_printmodeline], Modeline 33:"800x600" 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
[drm:drm_mode_debug_printmodeline], Modeline 29:"720x480" 60 27000 720 736 798 858 480 489 495 525 0x40 0xa
[drm:drm_mode_debug_printmodeline], Modeline 34:"640x480" 75 31500 640 656 720 840 480 481 484 500 0x40 0xa
[drm:drm_mode_debug_printmodeline], Modeline 35:"640x480" 60 25200 640 656 752 800 480 490 492 525 0x40 0xa
[drm:drm_mode_debug_printmodeline], Modeline 36:"720x400" 70 28320 720 738 846 900 400 412 414 449 0x40 0x6
[drm:drm_helper_probe_single_connector_modes], SVIDEO-1
[drm:intel_sdvo_debug_write], SDVOB: W: 05 00 00 (SDVO_CMD_SET_ACTIVE_OUTPUTS)
[drm:intel_sdvo_debug_response], SDVOB: R: (Success)
[drm:intel_update_watermarks], plane B (pipe 0) clock: 107520
[drm:i9xx_get_fifo_size], FIFO size - (0x00001d9c) A: 28
[drm:i9xx_get_fifo_size], FIFO size - (0x00001d9c) B: 31
[drm:intel_calculate_wm], FIFO entries required for mode: 0
[drm:intel_calculate_wm], FIFO watermark level: 26
[drm:intel_calculate_wm], FIFO entries required for mode: 33
[drm:intel_calculate_wm], FIFO watermark level: -4
[drm:i9xx_update_wm], FIFO watermarks - A: 26, B: 1
[drm:i9xx_update_wm], self-refresh entries: 43
[drm:i9xx_update_wm], Setting FIFO watermarks - A: 26, B: 1, C: 2, SR 84
[drm:i915_get_vblank_counter], trying to get vblank count for disabled pipe 0
[drm:intel_crtc_mode_set], Mode for pipe A:
[drm:drm_mode_debug_printmodeline], Modeline 0:"NTSC 480i" 0 107520 1280 1368 1496 1712 1024 1027 1034 1104 0x40 0x0
[drm:intel_pipe_set_base], No FB bound
[drm:intel_update_watermarks], plane B (pipe 0) clock: 107520
[drm:i9xx_get_fifo_size], FIFO size - (0x00001d9c) A: 28
[drm:i9xx_get_fifo_size], FIFO size - (0x00001d9c) B: 31
[drm:intel_calculate_wm], FIFO entries required for mode: 0
[drm:intel_calculate_wm], FIFO watermark level: 26
[drm:intel_calculate_wm], FIFO entries required for mode: 33
[drm:intel_calculate_wm], FIFO watermark level: -4
[drm:i9xx_update_wm], FIFO watermarks - A: 26, B: 1
[drm:i9xx_update_wm], self-refresh entries: 43
[drm:i9xx_update_wm], Setting FIFO watermarks - A: 26, B: 1, C: 2, SR 84
[drm:intel_update_watermarks], plane B (pipe 0) clock: 107520
[drm:i9xx_get_fifo_size], FIFO size - (0x00001d9c) A: 28
[drm:i9xx_get_fifo_size], FIFO size - (0x00001d9c) B: 31
[drm:intel_calculate_wm], FIFO entries required for mode: 0
[drm:intel_calculate_wm], FIFO watermark level: 26
[drm:intel_calculate_wm], FIFO entries required for mode: 33
[drm:intel_calculate_wm], FIFO watermark level: -4
[drm:i9xx_update_wm], FIFO watermarks - A: 26, B: 1
[drm:i9xx_update_wm], self-refresh entries: 43
[drm:i9xx_update_wm], Setting FIFO watermarks - A: 26, B: 1, C: 2, SR 84
[drm:intel_tv_detect_type], No TV connection detected
[drm:drm_helper_probe_single_connector_modes], SVIDEO-1 is disconnected
[drm:drm_setup_crtcs],
[drm:drm_enable_connectors], connector 5 enabled? no
[drm:drm_enable_connectors], connector 8 enabled? yes
[drm:drm_enable_connectors], connector 9 enabled? no
[drm:drm_target_preferred], looking for cmdline mode on connector 8
[drm:drm_target_preferred], looking for preferred mode on connector 8
[drm:drm_target_preferred], found mode 1920x1200
[drm:drm_setup_crtcs], picking CRTCs for 4096x4096 config
[drm:drm_setup_crtcs], desired mode 1920x1200 set on crtc 3
[drm:intelfb_create], allocated 1920x1200 fb: 0x007e0000, bo f6a86540
fbcon: inteldrmfb (fb0) is primary device
[drm:drm_crtc_helper_set_config],
[drm:drm_crtc_helper_set_config], crtc: f7147800 3 fb: f690b4c4 connectors: f6a09260 num_connectors: 1 (x, y) (0, 0)
[drm:drm_crtc_helper_set_config], crtc has no fb, full mode set
[drm:drm_crtc_helper_set_config], modes are different, full mode set
[drm:drm_mode_debug_printmodeline], Modeline 0:"NTSC 480i" 0 107520 1280 1368 1496 1712 1024 1027 1034 1104 0x40 0x0
[drm:drm_mode_debug_printmodeline], Modeline 27:"1920x1200" 60 154000 1920 1968 2000 2080 1200 1203 1209 1235 0x48 0x9
[drm:drm_crtc_helper_set_config], encoder changed, full mode switch
[drm:drm_crtc_helper_set_config], crtc changed, full mode switch
[drm:drm_crtc_helper_set_config], setting connector 8 crtc to f7147800
[drm:drm_crtc_helper_set_config], attempting to set mode from userspace
[drm:drm_mode_debug_printmodeline], Modeline 27:"1920x1200" 60 154000 1920 1968 2000 2080 1200 1203 1209 1235 0x48 0x9
[drm:intel_sdvo_debug_write], SDVOB: W: 05 00 00 (SDVO_CMD_SET_ACTIVE_OUTPUTS)
[drm:intel_sdvo_debug_response], SDVOB: R: (Success)
[drm:intel_update_watermarks], plane B (pipe 0) clock: 154000
[drm:i9xx_get_fifo_size], FIFO size - (0x00001d9c) A: 28
[drm:i9xx_get_fifo_size], FIFO size - (0x00001d9c) B: 31
[drm:intel_calculate_wm], FIFO entries required for mode: 0
[drm:intel_calculate_wm], FIFO watermark level: 26
[drm:intel_calculate_wm], FIFO entries required for mode: 48
[drm:intel_calculate_wm], FIFO watermark level: -19
[drm:i9xx_update_wm], FIFO watermarks - A: 26, B: 1
[drm:i9xx_update_wm], self-refresh entries: 60
[drm:i9xx_update_wm], Setting FIFO watermarks - A: 26, B: 1, C: 2, SR 67
[drm:intel_crtc_mode_set], Mode for pipe A:
[drm:drm_mode_debug_printmodeline], Modeline 27:"1920x1200" 60 154000 1920 1968 2000 2080 1200 1203 1209 1235 0x48 0x9
[drm:intel_pipe_set_base], Writing base 007E0000 00000000 0 0 7680
[drm:intel_update_watermarks], plane B (pipe 0) clock: 154000
[drm:i9xx_get_fifo_size], FIFO size - (0x00001d9c) A: 28
[drm:i9xx_get_fifo_size], FIFO size - (0x00001d9c) B: 31
[drm:intel_calculate_wm], FIFO entries required for mode: 0
[drm:intel_calculate_wm], FIFO watermark level: 26
[drm:intel_calculate_wm], FIFO entries required for mode: 48
[drm:intel_calculate_wm], FIFO watermark level: -19
[drm:i9xx_update_wm], FIFO watermarks - A: 26, B: 1
[drm:i9xx_update_wm], self-refresh entries: 60
[drm:i9xx_update_wm], Setting FIFO watermarks - A: 26, B: 1, C: 2, SR 67
[drm:intel_sdvo_debug_write], SDVOB: W: 07 01 00 00 00 (SDVO_CMD_SET_IN_OUT_MAP)
[drm:intel_sdvo_debug_response], SDVOB: R: (Success)
[drm:intel_sdvo_debug_write], SDVOB: W: 93 01 00 (SDVO_CMD_SET_HBUF_INDEX)
[drm:intel_sdvo_debug_write], SDVOB: W: 98 82 02 0D 6F 00 00 00 00 (SDVO_CMD_SET_HBUF_DATA)
[drm:intel_sdvo_debug_write], SDVOB: W: 98 00 00 00 00 00 00 00 00 (SDVO_CMD_SET_HBUF_DATA)
[drm:intel_sdvo_debug_write], SDVOB: W: 98 00 00 00 00 00 00 00 00 (SDVO_CMD_SET_HBUF_DATA)
[drm:intel_sdvo_debug_write], SDVOB: W: 9A C0 (SDVO_CMD_SET_HBUF_TXRATE)
[drm:intel_sdvo_debug_write], SDVOB: W: 11 01 00 (SDVO_CMD_SET_TARGET_OUTPUT)
[drm:intel_sdvo_debug_response], SDVOB: R: (Success)
[drm:intel_sdvo_debug_write], SDVOB: W: 16 28 3C 80 A0 70 B0 23 40 (SDVO_CMD_SET_OUTPUT_TIMINGS_PART1)
[drm:intel_sdvo_debug_response], SDVOB: R: (Success)
[drm:intel_sdvo_debug_write], SDVOB: W: 17 30 20 36 00 1A 00 00 00 (SDVO_CMD_SET_OUTPUT_TIMINGS_PART2)
[drm:intel_sdvo_debug_response], SDVOB: R: (Success)
[drm:intel_sdvo_debug_write], SDVOB: W: 10 00 (SDVO_CMD_SET_TARGET_INPUT)
[drm:intel_sdvo_debug_response], SDVOB: R: (Success)
[drm:intel_sdvo_debug_write], SDVOB: W: 14 28 3C 80 A0 70 B0 23 40 (SDVO_CMD_SET_INPUT_TIMINGS_PART1)
[drm:intel_sdvo_debug_response], SDVOB: R: (Success)
[drm:intel_sdvo_debug_write], SDVOB: W: 15 30 20 36 00 1A 00 00 00 (SDVO_CMD_SET_INPUT_TIMINGS_PART2)
[drm:intel_sdvo_debug_response], SDVOB: R: (Success)
[drm:intel_sdvo_debug_write], SDVOB: W: 21 01 (SDVO_CMD_SET_CLOCK_RATE_MULT)
[drm:intel_sdvo_debug_response], SDVOB: R: (Success)
[drm:intel_update_watermarks], plane B (pipe 0) clock: 154000
[drm:i9xx_get_fifo_size], FIFO size - (0x00001d9c) A: 28
[drm:i9xx_get_fifo_size], FIFO size - (0x00001d9c) B: 31
[drm:intel_calculate_wm], FIFO entries required for mode: 0
[drm:intel_calculate_wm], FIFO watermark level: 26
[drm:intel_calculate_wm], FIFO entries required for mode: 48
[drm:intel_calculate_wm], FIFO watermark level: -19
[drm:i9xx_update_wm], FIFO watermarks - A: 26, B: 1
[drm:i9xx_update_wm], self-refresh entries: 60
[drm:i9xx_update_wm], Setting FIFO watermarks - A: 26, B: 1, C: 2, SR 67
[drm:intel_sdvo_debug_write], SDVOB: W: 03 (SDVO_CMD_GET_TRAINED_INPUTS)
[drm:intel_sdvo_debug_response], SDVOB: R: 01 (Success)
[drm:intel_sdvo_debug_write], SDVOB: W: 05 01 00 (SDVO_CMD_SET_ACTIVE_OUTPUTS)
[drm:intel_sdvo_debug_response], SDVOB: R: (Success)
[drm:intel_update_watermarks], plane B (pipe 0) clock: 154000
[drm:i9xx_get_fifo_size], FIFO size - (0x00001d9c) A: 28
[drm:i9xx_get_fifo_size], FIFO size - (0x00001d9c) B: 31
[drm:intel_calculate_wm], FIFO entries required for mode: 0
[drm:intel_calculate_wm], FIFO watermark level: 26
[drm:intel_calculate_wm], FIFO entries required for mode: 48
[drm:intel_calculate_wm], FIFO watermark level: -19
[drm:i9xx_update_wm], FIFO watermarks - A: 26, B: 1
[drm:i9xx_update_wm], self-refresh entries: 60
[drm:i9xx_update_wm], Setting FIFO watermarks - A: 26, B: 1, C: 2, SR 67
[drm:i915_get_vblank_counter], trying to get vblank count for disabled pipe 1
[drm:drm_crtc_helper_set_config],
[drm:drm_crtc_helper_set_config], crtc: f6bf0800 4 fb: f690b4c4 connectors: f6a09250 num_connectors: 0 (x, y) (0, 0)
[drm:drm_crtc_helper_set_config], crtc has no fb, full mode set
[drm:drm_crtc_helper_set_config], setting connector 8 crtc to f7147800
[drm:intel_update_watermarks], plane B (pipe 0) clock: 154000
[drm:i9xx_get_fifo_size], FIFO size - (0x00001d9c) A: 28
[drm:i9xx_get_fifo_size], FIFO size - (0x00001d9c) B: 31
[drm:intel_calculate_wm], FIFO entries required for mode: 0
[drm:intel_calculate_wm], FIFO watermark level: 26
[drm:intel_calculate_wm], FIFO entries required for mode: 48
[drm:intel_calculate_wm], FIFO watermark level: -19
[drm:i9xx_update_wm], FIFO watermarks - A: 26, B: 1
[drm:i9xx_update_wm], self-refresh entries: 60
[drm:i9xx_update_wm], Setting FIFO watermarks - A: 26, B: 1, C: 2, SR 67
[drm:i915_get_vblank_counter], trying to get vblank count for disabled pipe 1
[drm:drm_crtc_helper_set_config],
[drm:drm_crtc_helper_set_config], crtc: f7147800 3 fb: f690b4c4 connectors: f6a09260 num_connectors: 1 (x, y) (0, 0)
[drm:drm_crtc_helper_set_config], setting connector 8 crtc to f7147800
Console: switching to colour frame buffer device 240x75
[drm:drm_crtc_helper_set_config],
[drm:drm_crtc_helper_set_config], crtc: f7147800 3 fb: f690b4c4 connectors: f6a09260 num_connectors: 1 (x, y) (0, 0)
[drm:drm_crtc_helper_set_config], setting connector 8 crtc to f7147800
fb0: inteldrmfb frame buffer device
drm: registered panic notifier
[drm:intel_opregion_init], graphic opregion physical addr: 0x0
[drm:intel_opregion_init], ACPI OpRegion not supported!
[drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
dracut: Starting plymouth daemon
[drm:drm_crtc_helper_set_config],
[drm:drm_crtc_helper_set_config], crtc: f7147800 3 fb: f690b4c4 connectors: f6a09260 num_connectors: 1 (x, y) (0, 0)
[drm:drm_crtc_helper_set_config], setting connector 8 crtc to f7147800
[drm:drm_crtc_helper_set_config],
[drm:drm_crtc_helper_set_config], crtc: f7147800 3 fb: f690b4c4 connectors: f6a09260 num_connectors: 1 (x, y) (0, 0)
[drm:drm_crtc_helper_set_config], setting connector 8 crtc to f7147800
dracut: Scanning devices sda2 for LVM volume groups
dracut: Reading all physical volumes. This may take a while...
dracut: Found volume group "NTBgroup" using metadata type lvm2
dracut: 3 logical volume(s) in volume group "NTBgroup" now active
EXT4-fs (dm-0): mounted filesystem with ordered data mode
dracut: Remounting /dev/NTBgroup/System2 with -o noatime,ro
EXT4-fs (dm-0): mounted filesystem with ordered data mode
dracut: Mounted root filesystem /dev/mapper/NTBgroup-System2
dracut: Loading SELinux policy
SELinux: Disabled at runtime.
SELinux: Unregistering netfilter hooks
type=1404 audit(1290425979.594:2): selinux=0 auid=4294967295 ses=4294967295
dracut: /sbin/load_policy: Can't load policy: No such file or directory
dracut: Switching root
readahead: starting
udev: starting version 151
microcode: CPU0 sig=0x106c2, pf=0x4, revision=0x212
microcode: CPU1 sig=0x106c2, pf=0x4, revision=0x212
microcode: Microcode Update Driver: v2.00 <tigran at aivazian.fsnet.co.uk>, Peter Oruba
intel_rng: Firmware space is locked read-only. If you can't or
intel_rng: don't want to disable this in firmware setup, and if
intel_rng: you are certain that your system has a functional
intel_rng: RNG, try using the 'no_fwh_detect' option.
i801_smbus 0000:00:1f.3: PCI INT B -> GSI 19 (level, low) -> IRQ 19
r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
r8169 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
r8169 0000:01:00.0: setting latency timer to 64
r8169 0000:01:00.0: irq 29 for MSI/MSI-X
r8169 0000:01:00.0: eth0: RTL8168d/8111d at 0xf8e3a000, 00:27:0e:04:b2:31, XID 081000c0 IRQ 29
iTCO_vendor_support: vendor-support=0
cfg80211: Calling CRDA to update world regulatory domain
iTCO_wdt: Intel TCO WatchDog Timer Driver v1.05
iTCO_wdt: Found a ICH7-M or ICH7-U TCO device (Version=2, TCOBASE=0x0460)
iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
leds_ss4200: no LED devices found
[drm:drm_crtc_helper_set_config],
[drm:drm_crtc_helper_set_config], crtc: f7147800 3 fb: f690b4c4 connectors: f6a09260 num_connectors: 1 (x, y) (0, 0)
[drm:drm_crtc_helper_set_config], setting connector 8 crtc to f7147800
ath9k 0000:02:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
ath9k 0000:02:00.0: setting latency timer to 64
ath: EEPROM regdomain: 0x60
ath: EEPROM indicates we should expect a direct regpair map
ath: Country alpha2 being used: 00
ath: Regpair used: 0x60
parport_pc 00:05: reported by Plug and Play ACPI
parport0: PC-style at 0x378 (0x778), irq 5 [PCSPP,TRISTATE,EPP]
ppdev: user-space parallel port driver
phy0: Selected rate control algorithm 'ath9k_rate_control'
Registered led device: ath9k-phy0::radio
Registered led device: ath9k-phy0::assoc
Registered led device: ath9k-phy0::tx
Registered led device: ath9k-phy0::rx
phy0: Atheros AR9285 Rev:2 mem=0xf9080000, irq=17
microcode: CPU0 updated to revision 0x218, date = 2009-04-10
microcode: CPU1 updated to revision 0x218, date = 2009-04-10
HDA Intel 0000:00:1b.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
HDA Intel 0000:00:1b.0: irq 30 for MSI/MSI-X
HDA Intel 0000:00:1b.0: setting latency timer to 64
hda_codec: ALC662 rev1: BIOS auto-probing.
ALSA sound/pci/hda/hda_codec.c:4358: autoconfig: line_outs=1 (0x14/0x0/0x0/0x0/0x0)
ALSA sound/pci/hda/hda_codec.c:4362: speaker_outs=1 (0x1a/0x0/0x0/0x0/0x0)
ALSA sound/pci/hda/hda_codec.c:4366: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
ALSA sound/pci/hda/hda_codec.c:4367: mono: mono_out=0x0
ALSA sound/pci/hda/hda_codec.c:4370: dig-out=0x1e/0x0
ALSA sound/pci/hda/hda_codec.c:4378: inputs: mic=0x19, fmic=0x0, line=0x0, fline=0x0, cd=0x0, aux=0x0
ALSA sound/pci/hda/patch_realtek.c:1287: realtek: No valid SSID, checking pincfg 0x4003c201 for NID 0x1d
ALSA sound/pci/hda/patch_realtek.c:1303: realtek: Enabling init ASM_ID=0xc201 CODEC_ID=10ec0662
cfg80211: World regulatory domain updated:
(start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
(2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
(2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
(2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
(5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
(5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: Calling CRDA for country: GB
cfg80211: Regulatory domain changed to country: GB
(start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
(2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
(5170000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm)
(5250000 KHz - 5330000 KHz @ 40000 KHz), (N/A, 2000 mBm)
(5490000 KHz - 5710000 KHz @ 40000 KHz), (N/A, 2700 mBm)
ata1.00: configured for UDMA/133
ata1: EH complete
kjournald starting. Commit interval 5 seconds
EXT3-fs (sda1): using internal journal
EXT3-fs (sda1): mounted filesystem with ordered data mode
EXT4-fs (dm-2): mounted filesystem with ordered data mode
Adding 2097148k swap on /dev/mapper/NTBgroup-Swap. Priority:-1 extents:1 across:2097148k
NET: Registered protocol family 10
lo: Disabled Privacy Extensions
r8169 0000:01:00.0: eth0: link up
r8169 0000:01:00.0: eth0: link up
w83627ehf: Found W83627DHG-P chip at 0xa00
eth0: no IPv6 routers present
[drm:drm_crtc_helper_set_config],
[drm:drm_crtc_helper_set_config], crtc: f7147800 3 fb: f690b4c4 connectors: f6a09260 num_connectors: 1 (x, y) (0, 0)
[drm:drm_crtc_helper_set_config], setting connector 8 crtc to f7147800
[drm:i915_driver_open],
[drm:drm_crtc_helper_set_config],
[drm:drm_crtc_helper_set_config], crtc: f7147800 3 fb: f690b4c4 connectors: f6a09260 num_connectors: 1 (x, y) (0, 0)
[drm:drm_crtc_helper_set_config], setting connector 8 crtc to f7147800
[drm:drm_crtc_helper_set_config],
[drm:drm_crtc_helper_set_config], crtc: f6bf0800 4 fb: f690b4c4 connectors: f6a09250 num_connectors: 0 (x, y) (0, 0)
[drm:drm_crtc_helper_set_config], crtc has no fb, full mode set
[drm:drm_crtc_helper_set_config], setting connector 8 crtc to f7147800
[drm:intel_update_watermarks], plane B (pipe 0) clock: 154000
[drm:i9xx_get_fifo_size], FIFO size - (0x00001d9c) A: 28
[drm:i9xx_get_fifo_size], FIFO size - (0x00001d9c) B: 31
[drm:intel_calculate_wm], FIFO entries required for mode: 0
[drm:intel_calculate_wm], FIFO watermark level: 26
[drm:intel_calculate_wm], FIFO entries required for mode: 48
[drm:intel_calculate_wm], FIFO watermark level: -19
[drm:i9xx_update_wm], FIFO watermarks - A: 26, B: 1
[drm:i9xx_update_wm], self-refresh entries: 60
[drm:i9xx_update_wm], Setting FIFO watermarks - A: 26, B: 1, C: 2, SR 67
[drm:i915_get_vblank_counter], trying to get vblank count for disabled pipe 1
[drm:i915_driver_open],
[drm:i915_getparam], Unknown parameter 11
[drm:i915_getparam], Unknown parameter 12
[drm:drm_mode_getresources], Counted 2 3 3
[drm:drm_mode_getresources], Counted 2 3 3
[drm:drm_mode_getconnector], connector id 5:
[drm:drm_helper_probe_single_connector_modes], VGA-1
[drm:drm_helper_probe_single_connector_modes], VGA-1 is disconnected
[drm:drm_mode_getconnector], connector id 5:
[drm:drm_helper_probe_single_connector_modes], VGA-1
[drm:drm_helper_probe_single_connector_modes], VGA-1 is disconnected
[drm:drm_mode_getconnector], connector id 8:
[drm:drm_helper_probe_single_connector_modes], DVI-D-1
[drm:intel_sdvo_debug_write], SDVOB: W: 0B (SDVO_CMD_GET_ATTACHED_DISPLAYS)
[drm:intel_sdvo_debug_response], SDVOB: R: 01 00 (Success)
[drm:intel_sdvo_detect], SDVO response 1 0
[drm:intel_sdvo_debug_write], SDVOB: W: 7A 02 (SDVO_CMD_SET_CONTROL_BUS_SWITCH)
[drm:intel_sdvo_debug_write], SDVOB: W: 7A 02 (SDVO_CMD_SET_CONTROL_BUS_SWITCH)
[drm:intel_sdvo_debug_write], SDVOB: W: 7A 02 (SDVO_CMD_SET_CONTROL_BUS_SWITCH)
[drm:intel_sdvo_debug_write], SDVOB: W: 7A 02 (SDVO_CMD_SET_CONTROL_BUS_SWITCH)
[drm:intel_sdvo_debug_write], SDVOB: W: 7A 02 (SDVO_CMD_SET_CONTROL_BUS_SWITCH)
[drm:intel_sdvo_debug_write], SDVOB: W: 7A 02 (SDVO_CMD_SET_CONTROL_BUS_SWITCH)
[drm:drm_mode_debug_printmodeline], Modeline 44:"1920x1080i" 0 74250 1920 2008 2052 2200 1080 1084 1094 1125 0x40 0x15
[drm:drm_mode_prune_invalid], Not using 1920x1080i mode 7
[drm:drm_helper_probe_single_connector_modes], Probed modes for DVI-D-1
[drm:drm_mode_debug_printmodeline], Modeline 25:"1920x1200" 60 154000 1920 1968 2000 2080 1200 1203 1209 1235 0x48 0x9
[drm:drm_mode_debug_printmodeline], Modeline 26:"1920x1080" 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x40 0x5
[drm:drm_mode_debug_printmodeline], Modeline 31:"1600x1200" 60 162000 1600 1664 1856 2160 1200 1201 1204 1250 0x40 0x5
[drm:drm_mode_debug_printmodeline], Modeline 37:"1280x1024" 75 135000 1280 1296 1440 1688 1024 1025 1028 1066 0x40 0x5
[drm:drm_mode_debug_printmodeline], Modeline 30:"1280x1024" 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x40 0x5
[drm:drm_mode_debug_printmodeline], Modeline 32:"1152x864" 75 108000 1152 1216 1344 1600 864 865 868 900 0x40 0x5
[drm:drm_mode_debug_printmodeline], Modeline 28:"1280x720" 60 74250 1280 1390 1430 1650 720 725 730 750 0x40 0x5
[drm:drm_mode_debug_printmodeline], Modeline 38:"1024x768" 75 78800 1024 1040 1136 1312 768 769 772 800 0x40 0x5
[drm:drm_mode_debug_printmodeline], Modeline 39:"1024x768" 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
[drm:drm_mode_debug_printmodeline], Modeline 40:"800x600" 75 49500 800 816 896 1056 600 601 604 625 0x40 0x5
[drm:drm_mode_debug_printmodeline], Modeline 33:"800x600" 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
[drm:drm_mode_debug_printmodeline], Modeline 29:"720x480" 60 27000 720 736 798 858 480 489 495 525 0x40 0xa
[drm:drm_mode_debug_printmodeline], Modeline 34:"640x480" 75 31500 640 656 720 840 480 481 484 500 0x40 0xa
[drm:drm_mode_debug_printmodeline], Modeline 35:"640x480" 60 25200 640 656 752 800 480 490 492 525 0x40 0xa
[drm:drm_mode_debug_printmodeline], Modeline 36:"720x400" 70 28320 720 738 846 900 400 412 414 449 0x40 0x6
[drm:drm_mode_getconnector], connector id 8:
[drm:drm_mode_getconnector], connector id 9:
[drm:drm_helper_probe_single_connector_modes], SVIDEO-1
[drm:intel_update_watermarks], plane B (pipe 0) clock: 154000
[drm:intel_update_watermarks], plane A (pipe 1) clock: 107520
[drm:i9xx_get_fifo_size], FIFO size - (0x00001d9c) A: 28
[drm:i9xx_get_fifo_size], FIFO size - (0x00001d9c) B: 31
[drm:intel_calculate_wm], FIFO entries required for mode: 33
[drm:intel_calculate_wm], FIFO watermark level: -7
[drm:intel_calculate_wm], FIFO entries required for mode: 48
[drm:intel_calculate_wm], FIFO watermark level: -19
[drm:i9xx_update_wm], FIFO watermarks - A: 1, B: 1
[drm:i9xx_update_wm], Setting FIFO watermarks - A: 1, B: 1, C: 2, SR 1
[drm:i915_get_vblank_counter], trying to get vblank count for disabled pipe 1
[drm:intel_crtc_mode_set], Mode for pipe B:
[drm:drm_mode_debug_printmodeline], Modeline 0:"NTSC 480i" 0 107520 1280 1368 1496 1712 1024 1027 1034 1104 0x40 0x0
[drm:intel_pipe_set_base], No FB bound
[drm:intel_update_watermarks], plane B (pipe 0) clock: 154000
[drm:intel_update_watermarks], plane A (pipe 1) clock: 107520
[drm:i9xx_get_fifo_size], FIFO size - (0x00001d9c) A: 28
[drm:i9xx_get_fifo_size], FIFO size - (0x00001d9c) B: 31
[drm:intel_calculate_wm], FIFO entries required for mode: 33
[drm:intel_calculate_wm], FIFO watermark level: -7
[drm:intel_calculate_wm], FIFO entries required for mode: 48
[drm:intel_calculate_wm], FIFO watermark level: -19
[drm:i9xx_update_wm], FIFO watermarks - A: 1, B: 1
[drm:i9xx_update_wm], Setting FIFO watermarks - A: 1, B: 1, C: 2, SR 1
[drm:intel_update_watermarks], plane B (pipe 0) clock: 154000
[drm:intel_update_watermarks], plane A (pipe 1) clock: 107520
[drm:i9xx_get_fifo_size], FIFO size - (0x00001d9c) A: 28
[drm:i9xx_get_fifo_size], FIFO size - (0x00001d9c) B: 31
[drm:intel_calculate_wm], FIFO entries required for mode: 33
[drm:intel_calculate_wm], FIFO watermark level: -7
[drm:intel_calculate_wm], FIFO entries required for mode: 48
[drm:intel_calculate_wm], FIFO watermark level: -19
[drm:i9xx_update_wm], FIFO watermarks - A: 1, B: 1
[drm:i9xx_update_wm], Setting FIFO watermarks - A: 1, B: 1, C: 2, SR 1
[drm:intel_tv_detect_type], No TV connection detected
[drm:drm_helper_probe_single_connector_modes], SVIDEO-1 is disconnected
[drm:drm_mode_getconnector], connector id 9:
[drm:drm_helper_probe_single_connector_modes], SVIDEO-1
[drm:intel_update_watermarks], plane B (pipe 0) clock: 154000
[drm:intel_update_watermarks], plane A (pipe 1) clock: 107520
[drm:i9xx_get_fifo_size], FIFO size - (0x00001d9c) A: 28
[drm:i9xx_get_fifo_size], FIFO size - (0x00001d9c) B: 31
[drm:intel_calculate_wm], FIFO entries required for mode: 33
[drm:intel_calculate_wm], FIFO watermark level: -7
[drm:intel_calculate_wm], FIFO entries required for mode: 48
[drm:intel_calculate_wm], FIFO watermark level: -19
[drm:i9xx_update_wm], FIFO watermarks - A: 1, B: 1
[drm:i9xx_update_wm], Setting FIFO watermarks - A: 1, B: 1, C: 2, SR 1
[drm:intel_crtc_mode_set], Mode for pipe B:
[drm:drm_mode_debug_printmodeline], Modeline 0:"NTSC 480i" 0 107520 1280 1368 1496 1712 1024 1027 1034 1104 0x40 0x0
[drm:intel_pipe_set_base], No FB bound
[drm:intel_update_watermarks], plane B (pipe 0) clock: 154000
[drm:intel_update_watermarks], plane A (pipe 1) clock: 107520
[drm:i9xx_get_fifo_size], FIFO size - (0x00001d9c) A: 28
[drm:i9xx_get_fifo_size], FIFO size - (0x00001d9c) B: 31
[drm:intel_calculate_wm], FIFO entries required for mode: 33
[drm:intel_calculate_wm], FIFO watermark level: -7
[drm:intel_calculate_wm], FIFO entries required for mode: 48
[drm:intel_calculate_wm], FIFO watermark level: -19
[drm:i9xx_update_wm], FIFO watermarks - A: 1, B: 1
[drm:i9xx_update_wm], Setting FIFO watermarks - A: 1, B: 1, C: 2, SR 1
[drm:intel_update_watermarks], plane B (pipe 0) clock: 154000
[drm:intel_update_watermarks], plane A (pipe 1) clock: 107520
[drm:i9xx_get_fifo_size], FIFO size - (0x00001d9c) A: 28
[drm:i9xx_get_fifo_size], FIFO size - (0x00001d9c) B: 31
[drm:intel_calculate_wm], FIFO entries required for mode: 33
[drm:intel_calculate_wm], FIFO watermark level: -7
[drm:intel_calculate_wm], FIFO entries required for mode: 48
[drm:intel_calculate_wm], FIFO watermark level: -19
[drm:i9xx_update_wm], FIFO watermarks - A: 1, B: 1
[drm:i9xx_update_wm], Setting FIFO watermarks - A: 1, B: 1, C: 2, SR 1
[drm:intel_tv_detect_type], No TV connection detected
[drm:drm_helper_probe_single_connector_modes], SVIDEO-1 is disconnected
[drm:drm_mode_getconnector], connector id 5:
[drm:drm_helper_probe_single_connector_modes], VGA-1
[drm:drm_helper_probe_single_connector_modes], VGA-1 is disconnected
[drm:drm_mode_getconnector], connector id 5:
[drm:drm_helper_probe_single_connector_modes], VGA-1
[drm:drm_helper_probe_single_connector_modes], VGA-1 is disconnected
[drm:drm_mode_getconnector], connector id 8:
[drm:drm_helper_probe_single_connector_modes], DVI-D-1
[drm:intel_sdvo_debug_write], SDVOB: W: 0B (SDVO_CMD_GET_ATTACHED_DISPLAYS)
[drm:intel_sdvo_debug_response], SDVOB: R: 01 00 (Success)
[drm:intel_sdvo_detect], SDVO response 1 0
[drm:intel_sdvo_debug_write], SDVOB: W: 7A 02 (SDVO_CMD_SET_CONTROL_BUS_SWITCH)
[drm:intel_sdvo_debug_write], SDVOB: W: 7A 02 (SDVO_CMD_SET_CONTROL_BUS_SWITCH)
[drm:intel_sdvo_debug_write], SDVOB: W: 7A 02 (SDVO_CMD_SET_CONTROL_BUS_SWITCH)
[drm:intel_sdvo_debug_write], SDVOB: W: 7A 02 (SDVO_CMD_SET_CONTROL_BUS_SWITCH)
[drm:intel_sdvo_debug_write], SDVOB: W: 7A 02 (SDVO_CMD_SET_CONTROL_BUS_SWITCH)
[drm:intel_sdvo_debug_write], SDVOB: W: 7A 02 (SDVO_CMD_SET_CONTROL_BUS_SWITCH)
[drm:drm_mode_debug_printmodeline], Modeline 44:"1920x1080i" 0 74250 1920 2008 2052 2200 1080 1084 1094 1125 0x40 0x15
[drm:drm_mode_prune_invalid], Not using 1920x1080i mode 7
[drm:drm_helper_probe_single_connector_modes], Probed modes for DVI-D-1
[drm:drm_mode_debug_printmodeline], Modeline 25:"1920x1200" 60 154000 1920 1968 2000 2080 1200 1203 1209 1235 0x48 0x9
[drm:drm_mode_debug_printmodeline], Modeline 26:"1920x1080" 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x40 0x5
[drm:drm_mode_debug_printmodeline], Modeline 31:"1600x1200" 60 162000 1600 1664 1856 2160 1200 1201 1204 1250 0x40 0x5
[drm:drm_mode_debug_printmodeline], Modeline 37:"1280x1024" 75 135000 1280 1296 1440 1688 1024 1025 1028 1066 0x40 0x5
[drm:drm_mode_debug_printmodeline], Modeline 30:"1280x1024" 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x40 0x5
[drm:drm_mode_debug_printmodeline], Modeline 32:"1152x864" 75 108000 1152 1216 1344 1600 864 865 868 900 0x40 0x5
[drm:drm_mode_debug_printmodeline], Modeline 28:"1280x720" 60 74250 1280 1390 1430 1650 720 725 730 750 0x40 0x5
[drm:drm_mode_debug_printmodeline], Modeline 38:"1024x768" 75 78800 1024 1040 1136 1312 768 769 772 800 0x40 0x5
[drm:drm_mode_debug_printmodeline], Modeline 39:"1024x768" 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
[drm:drm_mode_debug_printmodeline], Modeline 40:"800x600" 75 49500 800 816 896 1056 600 601 604 625 0x40 0x5
[drm:drm_mode_debug_printmodeline], Modeline 33:"800x600" 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
[drm:drm_mode_debug_printmodeline], Modeline 29:"720x480" 60 27000 720 736 798 858 480 489 495 525 0x40 0xa
[drm:drm_mode_debug_printmodeline], Modeline 34:"640x480" 75 31500 640 656 720 840 480 481 484 500 0x40 0xa
[drm:drm_mode_debug_printmodeline], Modeline 35:"640x480" 60 25200 640 656 752 800 480 490 492 525 0x40 0xa
[drm:drm_mode_debug_printmodeline], Modeline 36:"720x400" 70 28320 720 738 846 900 400 412 414 449 0x40 0x6
[drm:drm_mode_getconnector], connector id 8:
[drm:drm_crtc_helper_set_config],
[drm:drm_crtc_helper_set_config], crtc: f7147800 3 fb: f44af080 connectors: f6364500 num_connectors: 1 (x, y) (0, 0)
[drm:drm_crtc_helper_set_config], modes are different, full mode set
[drm:drm_mode_debug_printmodeline], Modeline 27:"1920x1200" 60 154000 1920 1968 2000 2080 1200 1203 1209 1235 0x48 0x9
[drm:drm_mode_debug_printmodeline], Modeline 43:"NTB-custom-1680x1050" 0 146250 1680 1784 1960 2240 1050 1053 1059 1089 0x0 0x6
[drm:drm_crtc_helper_set_config], setting connector 8 crtc to f7147800
[drm:drm_crtc_helper_set_config], attempting to set mode from userspace
[drm:drm_mode_debug_printmodeline], Modeline 43:"NTB-custom-1680x1050" 0 146250 1680 1784 1960 2240 1050 1053 1059 1089 0x0 0x6
[drm:intel_sdvo_debug_write], SDVOB: W: 05 00 00 (SDVO_CMD_SET_ACTIVE_OUTPUTS)
[drm:intel_sdvo_debug_response], SDVOB: R: (Success)
[drm:intel_update_watermarks], plane B (pipe 0) clock: 146250
[drm:i9xx_get_fifo_size], FIFO size - (0x00001d9c) A: 28
[drm:i9xx_get_fifo_size], FIFO size - (0x00001d9c) B: 31
[drm:intel_calculate_wm], FIFO entries required for mode: 0
[drm:intel_calculate_wm], FIFO watermark level: 26
[drm:intel_calculate_wm], FIFO entries required for mode: 45
[drm:intel_calculate_wm], FIFO watermark level: -16
[drm:i9xx_update_wm], FIFO watermarks - A: 26, B: 1
[drm:i9xx_update_wm], self-refresh entries: 57
[drm:i9xx_update_wm], Setting FIFO watermarks - A: 26, B: 1, C: 2, SR 70
[drm:intel_crtc_mode_set], Mode for pipe A:
[drm:drm_mode_debug_printmodeline], Modeline 43:"NTB-custom-1680x1050" 0 146250 1680 1784 1960 2240 1050 1053 1059 1089 0x0 0x6
[drm:intel_pipe_set_base], Writing base 02000000 00000000 0 0 8192
[drm:intel_update_watermarks], plane B (pipe 0) clock: 146250
[drm:i9xx_get_fifo_size], FIFO size - (0x00001d9c) A: 28
[drm:i9xx_get_fifo_size], FIFO size - (0x00001d9c) B: 31
[drm:intel_calculate_wm], FIFO entries required for mode: 0
[drm:intel_calculate_wm], FIFO watermark level: 26
[drm:intel_calculate_wm], FIFO entries required for mode: 45
[drm:intel_calculate_wm], FIFO watermark level: -16
[drm:i9xx_update_wm], FIFO watermarks - A: 26, B: 1
[drm:i9xx_update_wm], self-refresh entries: 57
[drm:i9xx_update_wm], Setting FIFO watermarks - A: 26, B: 1, C: 2, SR 70
[drm:intel_sdvo_debug_write], SDVOB: W: 07 01 00 00 00 (SDVO_CMD_SET_IN_OUT_MAP)
[drm:intel_sdvo_debug_response], SDVOB: R: (Success)
[drm:intel_sdvo_debug_write], SDVOB: W: 93 01 00 (SDVO_CMD_SET_HBUF_INDEX)
[drm:intel_sdvo_debug_write], SDVOB: W: 98 82 02 0D 6F 00 00 00 00 (SDVO_CMD_SET_HBUF_DATA)
[drm:intel_sdvo_debug_write], SDVOB: W: 98 00 00 00 00 00 00 00 00 (SDVO_CMD_SET_HBUF_DATA)
[drm:intel_sdvo_debug_write], SDVOB: W: 98 00 00 00 00 00 00 00 00 (SDVO_CMD_SET_HBUF_DATA)
[drm:intel_sdvo_debug_write], SDVOB: W: 9A C0 (SDVO_CMD_SET_HBUF_TXRATE)
[drm:intel_sdvo_debug_write], SDVOB: W: 11 01 00 (SDVO_CMD_SET_TARGET_OUTPUT)
[drm:intel_sdvo_debug_response], SDVOB: R: (Success)
[drm:intel_sdvo_debug_write], SDVOB: W: 16 21 39 90 30 62 1A 27 40 (SDVO_CMD_SET_OUTPUT_TIMINGS_PART1)
[drm:intel_sdvo_debug_response], SDVOB: R: (Success)
[drm:intel_sdvo_debug_write], SDVOB: W: 17 68 B0 36 00 1C 00 00 00 (SDVO_CMD_SET_OUTPUT_TIMINGS_PART2)
[drm:intel_sdvo_debug_response], SDVOB: R: (Success)
[drm:intel_sdvo_debug_write], SDVOB: W: 10 00 (SDVO_CMD_SET_TARGET_INPUT)
[drm:intel_sdvo_debug_response], SDVOB: R: (Success)
[drm:intel_sdvo_debug_write], SDVOB: W: 14 21 39 90 30 62 1A 27 40 (SDVO_CMD_SET_INPUT_TIMINGS_PART1)
[drm:intel_sdvo_debug_response], SDVOB: R: (Success)
[drm:intel_sdvo_debug_write], SDVOB: W: 15 68 B0 36 00 1C 00 00 00 (SDVO_CMD_SET_INPUT_TIMINGS_PART2)
[drm:intel_sdvo_debug_response], SDVOB: R: (Success)
[drm:intel_sdvo_debug_write], SDVOB: W: 21 01 (SDVO_CMD_SET_CLOCK_RATE_MULT)
[drm:intel_sdvo_debug_response], SDVOB: R: (Success)
[drm:intel_update_watermarks], plane B (pipe 0) clock: 146250
[drm:i9xx_get_fifo_size], FIFO size - (0x00001d9c) A: 28
[drm:i9xx_get_fifo_size], FIFO size - (0x00001d9c) B: 31
[drm:intel_calculate_wm], FIFO entries required for mode: 0
[drm:intel_calculate_wm], FIFO watermark level: 26
[drm:intel_calculate_wm], FIFO entries required for mode: 45
[drm:intel_calculate_wm], FIFO watermark level: -16
[drm:i9xx_update_wm], FIFO watermarks - A: 26, B: 1
[drm:i9xx_update_wm], self-refresh entries: 57
[drm:i9xx_update_wm], Setting FIFO watermarks - A: 26, B: 1, C: 2, SR 70
[drm:intel_sdvo_debug_write], SDVOB: W: 03 (SDVO_CMD_GET_TRAINED_INPUTS)
[drm:intel_sdvo_debug_response], SDVOB: R: 01 (Success)
[drm:intel_sdvo_debug_write], SDVOB: W: 05 01 00 (SDVO_CMD_SET_ACTIVE_OUTPUTS)
[drm:intel_sdvo_debug_response], SDVOB: R: (Success)
[drm:intel_update_watermarks], plane B (pipe 0) clock: 146250
[drm:i9xx_get_fifo_size], FIFO size - (0x00001d9c) A: 28
[drm:i9xx_get_fifo_size], FIFO size - (0x00001d9c) B: 31
[drm:intel_calculate_wm], FIFO entries required for mode: 0
[drm:intel_calculate_wm], FIFO watermark level: 26
[drm:intel_calculate_wm], FIFO entries required for mode: 45
[drm:intel_calculate_wm], FIFO watermark level: -16
[drm:i9xx_update_wm], FIFO watermarks - A: 26, B: 1
[drm:i9xx_update_wm], self-refresh entries: 57
[drm:i9xx_update_wm], Setting FIFO watermarks - A: 26, B: 1, C: 2, SR 70
[drm:i915_getparam], Unknown parameter 11
[drm:i915_getparam], Unknown parameter 12
[drm:intel_mark_busy], disable memory self refresh on 945
[drm:intel_mark_busy], disable memory self refresh on 945
[drm:drm_mode_getconnector], connector id 5:
[drm:drm_helper_probe_single_connector_modes], VGA-1
[drm:drm_helper_probe_single_connector_modes], VGA-1 is disconnected
[drm:drm_mode_getconnector], connector id 5:
[drm:drm_helper_probe_single_connector_modes], VGA-1
[drm:drm_helper_probe_single_connector_modes], VGA-1 is disconnected
[drm:drm_mode_getconnector], connector id 8:
[drm:drm_helper_probe_single_connector_modes], DVI-D-1
[drm:intel_sdvo_debug_write], SDVOB: W: 0B (SDVO_CMD_GET_ATTACHED_DISPLAYS)
[drm:intel_sdvo_debug_response], SDVOB: R: 01 00 (Success)
[drm:intel_sdvo_detect], SDVO response 1 0
[drm:intel_sdvo_debug_write], SDVOB: W: 7A 02 (SDVO_CMD_SET_CONTROL_BUS_SWITCH)
[drm:intel_sdvo_debug_write], SDVOB: W: 7A 02 (SDVO_CMD_SET_CONTROL_BUS_SWITCH)
[drm:intel_sdvo_debug_write], SDVOB: W: 7A 02 (SDVO_CMD_SET_CONTROL_BUS_SWITCH)
[drm:intel_sdvo_debug_write], SDVOB: W: 7A 02 (SDVO_CMD_SET_CONTROL_BUS_SWITCH)
[drm:intel_sdvo_debug_write], SDVOB: W: 7A 02 (SDVO_CMD_SET_CONTROL_BUS_SWITCH)
[drm:intel_sdvo_debug_write], SDVOB: W: 7A 02 (SDVO_CMD_SET_CONTROL_BUS_SWITCH)
[drm:intel_gpu_idle_timer], idle timer fired, downclocking
[drm:intel_idle_update], enable memory self refresh on 945
[drm:drm_mode_debug_printmodeline], Modeline 46:"1920x1080i" 0 74250 1920 2008 2052 2200 1080 1084 1094 1125 0x40 0x15
[drm:drm_mode_prune_invalid], Not using 1920x1080i mode 7
[drm:drm_helper_probe_single_connector_modes], Probed modes for DVI-D-1
[drm:drm_mode_debug_printmodeline], Modeline 25:"1920x1200" 60 154000 1920 1968 2000 2080 1200 1203 1209 1235 0x48 0x9
[drm:drm_mode_debug_printmodeline], Modeline 26:"1920x1080" 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x40 0x5
[drm:drm_mode_debug_printmodeline], Modeline 31:"1600x1200" 60 162000 1600 1664 1856 2160 1200 1201 1204 1250 0x40 0x5
[drm:drm_mode_debug_printmodeline], Modeline 37:"1280x1024" 75 135000 1280 1296 1440 1688 1024 1025 1028 1066 0x40 0x5
[drm:drm_mode_debug_printmodeline], Modeline 30:"1280x1024" 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x40 0x5
[drm:drm_mode_debug_printmodeline], Modeline 32:"1152x864" 75 108000 1152 1216 1344 1600 864 865 868 900 0x40 0x5
[drm:drm_mode_debug_printmodeline], Modeline 28:"1280x720" 60 74250 1280 1390 1430 1650 720 725 730 750 0x40 0x5
[drm:drm_mode_debug_printmodeline], Modeline 38:"1024x768" 75 78800 1024 1040 1136 1312 768 769 772 800 0x40 0x5
[drm:drm_mode_debug_printmodeline], Modeline 39:"1024x768" 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
[drm:drm_mode_debug_printmodeline], Modeline 40:"800x600" 75 49500 800 816 896 1056 600 601 604 625 0x40 0x5
[drm:drm_mode_debug_printmodeline], Modeline 33:"800x600" 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
[drm:drm_mode_debug_printmodeline], Modeline 29:"720x480" 60 27000 720 736 798 858 480 489 495 525 0x40 0xa
[drm:drm_mode_debug_printmodeline], Modeline 34:"640x480" 75 31500 640 656 720 840 480 481 484 500 0x40 0xa
[drm:drm_mode_debug_printmodeline], Modeline 35:"640x480" 60 25200 640 656 752 800 480 490 492 525 0x40 0xa
[drm:drm_mode_debug_printmodeline], Modeline 36:"720x400" 70 28320 720 738 846 900 400 412 414 449 0x40 0x6
[drm:drm_mode_getconnector], connector id 8:
[drm:intel_mark_busy], disable memory self refresh on 945
[drm:intel_gpu_idle_timer], idle timer fired, downclocking
[drm:intel_idle_update], enable memory self refresh on 945
[drm:intel_crtc_idle_timer], idle timer fired, downclocking
[drm:intel_idle_update], enable memory self refresh on 945
[drm:intel_mark_busy], disable memory self refresh on 945
[drm:intel_mark_busy], disable memory self refresh on 945
[drm:intel_gpu_idle_timer], idle timer fired, downclocking
[drm:intel_idle_update], enable memory self refresh on 945
[drm:intel_crtc_idle_timer], idle timer fired, downclocking
[drm:intel_idle_update], enable memory self refresh on 945
[drm:drm_mode_getconnector], connector id 5:
[drm:drm_helper_probe_single_connector_modes], VGA-1
[drm:drm_helper_probe_single_connector_modes], VGA-1 is disconnected
[drm:drm_mode_getconnector], connector id 5:
[drm:drm_helper_probe_single_connector_modes], VGA-1
[drm:drm_helper_probe_single_connector_modes], VGA-1 is disconnected
[drm:drm_mode_getconnector], connector id 8:
[drm:drm_helper_probe_single_connector_modes], DVI-D-1
[drm:intel_sdvo_debug_write], SDVOB: W: 0B (SDVO_CMD_GET_ATTACHED_DISPLAYS)
[drm:intel_sdvo_debug_response], SDVOB: R: 01 00 (Success)
[drm:intel_sdvo_detect], SDVO response 1 0
[drm:intel_sdvo_debug_write], SDVOB: W: 7A 02 (SDVO_CMD_SET_CONTROL_BUS_SWITCH)
[drm:intel_sdvo_debug_write], SDVOB: W: 7A 02 (SDVO_CMD_SET_CONTROL_BUS_SWITCH)
[drm:intel_sdvo_debug_write], SDVOB: W: 7A 02 (SDVO_CMD_SET_CONTROL_BUS_SWITCH)
[drm:intel_sdvo_debug_write], SDVOB: W: 7A 02 (SDVO_CMD_SET_CONTROL_BUS_SWITCH)
[drm:intel_sdvo_debug_write], SDVOB: W: 7A 02 (SDVO_CMD_SET_CONTROL_BUS_SWITCH)
[drm:intel_sdvo_debug_write], SDVOB: W: 7A 02 (SDVO_CMD_SET_CONTROL_BUS_SWITCH)
[drm:drm_mode_debug_printmodeline], Modeline 46:"1920x1080i" 0 74250 1920 2008 2052 2200 1080 1084 1094 1125 0x40 0x15
[drm:drm_mode_prune_invalid], Not using 1920x1080i mode 7
[drm:drm_helper_probe_single_connector_modes], Probed modes for DVI-D-1
[drm:drm_mode_debug_printmodeline], Modeline 25:"1920x1200" 60 154000 1920 1968 2000 2080 1200 1203 1209 1235 0x48 0x9
[drm:drm_mode_debug_printmodeline], Modeline 26:"1920x1080" 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x40 0x5
[drm:drm_mode_debug_printmodeline], Modeline 31:"1600x1200" 60 162000 1600 1664 1856 2160 1200 1201 1204 1250 0x40 0x5
[drm:drm_mode_debug_printmodeline], Modeline 37:"1280x1024" 75 135000 1280 1296 1440 1688 1024 1025 1028 1066 0x40 0x5
[drm:drm_mode_debug_printmodeline], Modeline 30:"1280x1024" 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x40 0x5
[drm:drm_mode_debug_printmodeline], Modeline 32:"1152x864" 75 108000 1152 1216 1344 1600 864 865 868 900 0x40 0x5
[drm:drm_mode_debug_printmodeline], Modeline 28:"1280x720" 60 74250 1280 1390 1430 1650 720 725 730 750 0x40 0x5
[drm:drm_mode_debug_printmodeline], Modeline 38:"1024x768" 75 78800 1024 1040 1136 1312 768 769 772 800 0x40 0x5
[drm:drm_mode_debug_printmodeline], Modeline 39:"1024x768" 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
[drm:drm_mode_debug_printmodeline], Modeline 40:"800x600" 75 49500 800 816 896 1056 600 601 604 625 0x40 0x5
[drm:drm_mode_debug_printmodeline], Modeline 33:"800x600" 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
[drm:drm_mode_debug_printmodeline], Modeline 29:"720x480" 60 27000 720 736 798 858 480 489 495 525 0x40 0xa
[drm:drm_mode_debug_printmodeline], Modeline 34:"640x480" 75 31500 640 656 720 840 480 481 484 500 0x40 0xa
[drm:drm_mode_debug_printmodeline], Modeline 35:"640x480" 60 25200 640 656 752 800 480 490 492 525 0x40 0xa
[drm:drm_mode_debug_printmodeline], Modeline 36:"720x400" 70 28320 720 738 846 900 400 412 414 449 0x40 0x6
[drm:drm_mode_getconnector], connector id 8:
[drm:intel_mark_busy], disable memory self refresh on 945
[drm:i915_driver_irq_handler], pipe a underrun
[drm:i915_driver_irq_handler], pipe b underrun
[drm:intel_mark_busy], disable memory self refresh on 945
[drm:i915_driver_open],
[drm:i915_getparam], Unknown parameter 11
[drm:i915_getparam], Unknown parameter 12
[drm:i915_driver_open],
[drm:i915_getparam], Unknown parameter 11
[drm:i915_getparam], Unknown parameter 12
[drm:drm_mode_getconnector], connector id 5:
[drm:drm_helper_probe_single_connector_modes], VGA-1
[drm:drm_helper_probe_single_connector_modes], VGA-1 is disconnected
[drm:drm_mode_getconnector], connector id 5:
[drm:drm_helper_probe_single_connector_modes], VGA-1
[drm:drm_helper_probe_single_connector_modes], VGA-1 is disconnected
[drm:drm_mode_getconnector], connector id 8:
[drm:drm_helper_probe_single_connector_modes], DVI-D-1
[drm:intel_sdvo_debug_write], SDVOB: W: 0B (SDVO_CMD_GET_ATTACHED_DISPLAYS)
[drm:intel_sdvo_debug_response], SDVOB: R: 01 00 (Success)
[drm:intel_sdvo_detect], SDVO response 1 0
[drm:intel_sdvo_debug_write], SDVOB: W: 7A 02 (SDVO_CMD_SET_CONTROL_BUS_SWITCH)
[drm:intel_sdvo_debug_write], SDVOB: W: 7A 02 (SDVO_CMD_SET_CONTROL_BUS_SWITCH)
[drm:intel_sdvo_debug_write], SDVOB: W: 7A 02 (SDVO_CMD_SET_CONTROL_BUS_SWITCH)
[drm:intel_sdvo_debug_write], SDVOB: W: 7A 02 (SDVO_CMD_SET_CONTROL_BUS_SWITCH)
[drm:intel_sdvo_debug_write], SDVOB: W: 7A 02 (SDVO_CMD_SET_CONTROL_BUS_SWITCH)
[drm:intel_sdvo_debug_write], SDVOB: W: 7A 02 (SDVO_CMD_SET_CONTROL_BUS_SWITCH)
[drm:intel_gpu_idle_timer], idle timer fired, downclocking
[drm:intel_idle_update], enable memory self refresh on 945
[drm:drm_mode_debug_printmodeline], Modeline 46:"1920x1080i" 0 74250 1920 2008 2052 2200 1080 1084 1094 1125 0x40 0x15
[drm:drm_mode_prune_invalid], Not using 1920x1080i mode 7
[drm:drm_helper_probe_single_connector_modes], Probed modes for DVI-D-1
[drm:drm_mode_debug_printmodeline], Modeline 25:"1920x1200" 60 154000 1920 1968 2000 2080 1200 1203 1209 1235 0x48 0x9
[drm:drm_mode_debug_printmodeline], Modeline 26:"1920x1080" 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x40 0x5
[drm:drm_mode_debug_printmodeline], Modeline 31:"1600x1200" 60 162000 1600 1664 1856 2160 1200 1201 1204 1250 0x40 0x5
[drm:drm_mode_debug_printmodeline], Modeline 37:"1280x1024" 75 135000 1280 1296 1440 1688 1024 1025 1028 1066 0x40 0x5
[drm:drm_mode_debug_printmodeline], Modeline 30:"1280x1024" 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x40 0x5
[drm:drm_mode_debug_printmodeline], Modeline 32:"1152x864" 75 108000 1152 1216 1344 1600 864 865 868 900 0x40 0x5
[drm:drm_mode_debug_printmodeline], Modeline 28:"1280x720" 60 74250 1280 1390 1430 1650 720 725 730 750 0x40 0x5
[drm:drm_mode_debug_printmodeline], Modeline 38:"1024x768" 75 78800 1024 1040 1136 1312 768 769 772 800 0x40 0x5
[drm:drm_mode_debug_printmodeline], Modeline 39:"1024x768" 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
[drm:drm_mode_debug_printmodeline], Modeline 40:"800x600" 75 49500 800 816 896 1056 600 601 604 625 0x40 0x5
[drm:drm_mode_debug_printmodeline], Modeline 33:"800x600" 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
[drm:drm_mode_debug_printmodeline], Modeline 29:"720x480" 60 27000 720 736 798 858 480 489 495 525 0x40 0xa
[drm:drm_mode_debug_printmodeline], Modeline 34:"640x480" 75 31500 640 656 720 840 480 481 484 500 0x40 0xa
[drm:drm_mode_debug_printmodeline], Modeline 35:"640x480" 60 25200 640 656 752 800 480 490 492 525 0x40 0xa
[drm:drm_mode_debug_printmodeline], Modeline 36:"720x400" 70 28320 720 738 846 900 400 412 414 449 0x40 0x6
[drm:drm_mode_getconnector], connector id 8:
[drm:intel_mark_busy], disable memory self refresh on 945
[drm:intel_gpu_idle_timer], idle timer fired, downclocking
[drm:intel_idle_update], enable memory self refresh on 945
[drm:intel_mark_busy], disable memory self refresh on 945
[drm:intel_gpu_idle_timer], idle timer fired, downclocking
[drm:intel_idle_update], enable memory self refresh on 945
[drm:intel_mark_busy], disable memory self refresh on 945
[drm:intel_gpu_idle_timer], idle timer fired, downclocking
[drm:intel_idle_update], enable memory self refresh on 945
More information about the Intel-gfx
mailing list