[Intel-gfx] [PATCH 20/20] drm/i915: diasable clock gating for the panel power sequencer

[Jesse Barnes]

Needed on Ibex Peak and Cougar Point or the panel won't always come on.

Cc: stable at kernel.org
Signed-off-by: Jesse Barnes <jbarnes at virtuousgeek.org>
---
 drivers/gpu/drm/i915/i915_reg.h      |    3 +++
 drivers/gpu/drm/i915/intel_display.c |    7 +++++++
 2 files changed, 10 insertions(+), 0 deletions(-)

diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h
index 5a22887..8829289 100644
--- a/drivers/gpu/drm/i915/i915_reg.h
+++ b/drivers/gpu/drm/i915/i915_reg.h
@@ -2784,6 +2784,9 @@
 #define  FDI_RX_PHASE_SYNC_POINTER_ENABLE       (1)
 #define FDI_RX_CHICKEN(pipe) _PIPE(pipe, FDI_RXA_CHICKEN, FDI_RXB_CHICKEN)
 
+#define SOUTH_DSPCLK_GATE_D	0xc2020
+#define  PCH_DPLSUNIT_CLOCK_GATE_DISABLE (1<<29)
+
 /* CPU: FDI_TX */
 #define FDI_TXA_CTL             0x60100
 #define FDI_TXB_CTL             0x61100
diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c
index 09bc613..159dd01 100644
--- a/drivers/gpu/drm/i915/intel_display.c
+++ b/drivers/gpu/drm/i915/intel_display.c
@@ -5744,6 +5744,13 @@ void intel_init_clock_gating(struct drm_device *dev)
 		I915_WRITE(PCH_DSPCLK_GATE_D, dspclk_gate);
 
 		/*
+		 * On Ibex Peak and Cougar Point, we need to disable clock
+		 * gating for the panel power sequencer or it will fail to
+		 * start up when no ports are active.
+		 */
+		I915_WRITE(SOUTH_DSPCLK_GATE_D, PCH_DPLSUNIT_CLOCK_GATE_DISABLE);
+
+		/*
 		 * According to the spec the following bits should be set in
 		 * order to enable memory self-refresh
 		 * The bit 22/21 of 0x42004
-- 
1.7.0.4