[Intel-gfx] [PATCH] drm/i915: make sure hotpulg is enabled

[Yuanhan Liu]

Make sure hotplug is enabled, or the hotplug interrupt will not be
invoked. And, for sandybridge, the bit definition for hotplug on
SDE is changed. So, update the code to new definition.

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=30378

Cc: stable at kernel.org
Signed-off-by: Yuanhan Liu <yuanhan.liu at intel.com>
---
 drivers/gpu/drm/i915/i915_irq.c  |   19 ++++++++++++++++---
 drivers/gpu/drm/i915/i915_reg.h  |    4 ++++
 drivers/gpu/drm/i915/intel_crt.c |    3 ++-
 3 files changed, 22 insertions(+), 4 deletions(-)

diff --git a/drivers/gpu/drm/i915/i915_irq.c b/drivers/gpu/drm/i915/i915_irq.c
index 744225e..39a5456 100644
--- a/drivers/gpu/drm/i915/i915_irq.c
+++ b/drivers/gpu/drm/i915/i915_irq.c
@@ -310,6 +310,7 @@ irqreturn_t ironlake_irq_handler(struct drm_device *dev)
 	drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private;
 	int ret = IRQ_NONE;
 	u32 de_iir, gt_iir, de_ier, pch_iir;
+	u32 hotplug_mask;
 	struct drm_i915_master_private *master_priv;
 	struct intel_ring_buffer *render_ring = &dev_priv->render_ring;
 
@@ -325,6 +326,11 @@ irqreturn_t ironlake_irq_handler(struct drm_device *dev)
 	if (de_iir == 0 && gt_iir == 0 && pch_iir == 0)
 		goto done;
 
+	if (HAS_PCH_CPT(dev))
+		hotplug_mask = SDE_HOTPLUG_MASK_CPT;
+	else
+		hotplug_mask = SDE_HOTPLUG_MASK;
+
 	ret = IRQ_HANDLED;
 
 	if (dev->primary->master) {
@@ -367,7 +373,7 @@ irqreturn_t ironlake_irq_handler(struct drm_device *dev)
 
 	/* check event from PCH */
 	if ((de_iir & DE_PCH_EVENT) &&
-	    (pch_iir & SDE_HOTPLUG_MASK)) {
+	    (pch_iir & hotplug_mask)) {
 		queue_work(dev_priv->wq, &dev_priv->hotplug_work);
 	}
 
@@ -1424,8 +1430,7 @@ static int ironlake_irq_postinstall(struct drm_device *dev)
 	u32 display_mask = DE_MASTER_IRQ_CONTROL | DE_GSE | DE_PCH_EVENT |
 			   DE_PLANEA_FLIP_DONE | DE_PLANEB_FLIP_DONE;
 	u32 render_mask = GT_PIPE_NOTIFY | GT_BSD_USER_INTERRUPT;
-	u32 hotplug_mask = SDE_CRT_HOTPLUG | SDE_PORTB_HOTPLUG |
-			   SDE_PORTC_HOTPLUG | SDE_PORTD_HOTPLUG;
+	u32 hotplug_mask;
 
 	dev_priv->irq_mask_reg = ~display_mask;
 	dev_priv->de_irq_enable_reg = display_mask | DE_PIPEA_VBLANK | DE_PIPEB_VBLANK;
@@ -1450,6 +1455,14 @@ static int ironlake_irq_postinstall(struct drm_device *dev)
 	I915_WRITE(GTIER, dev_priv->gt_irq_enable_reg);
 	(void) I915_READ(GTIER);
 
+	if (HAS_PCH_CPT(dev)) {
+		hotplug_mask = SDE_CRT_HOTPLUG_CPT | SDE_PORTB_HOTPLUG_CPT  |
+			       SDE_PORTC_HOTPLUG_CPT | SDE_PORTD_HOTPLUG_CPT ;
+	} else {
+		hotplug_mask = SDE_CRT_HOTPLUG | SDE_PORTB_HOTPLUG |
+			       SDE_PORTC_HOTPLUG | SDE_PORTD_HOTPLUG;
+	}
+
 	dev_priv->pch_irq_mask_reg = ~hotplug_mask;
 	dev_priv->pch_irq_enable_reg = hotplug_mask;
 
diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h
index 4f5e155..412b38a 100644
--- a/drivers/gpu/drm/i915/i915_reg.h
+++ b/drivers/gpu/drm/i915/i915_reg.h
@@ -2551,6 +2551,10 @@
 #define SDE_PORTD_HOTPLUG_CPT	(1 << 23)
 #define SDE_PORTC_HOTPLUG_CPT	(1 << 22)
 #define SDE_PORTB_HOTPLUG_CPT	(1 << 21)
+#define SDE_HOTPLUG_MASK_CPT	(SDE_CRT_HOTPLUG_CPT |		\
+				 SDE_PORTD_HOTPLUG_CPT |	\
+				 SDE_PORTC_HOTPLUG_CPT |	\
+				 SDE_PORTB_HOTPLUG_CPT)
 
 #define SDEISR  0xc4000
 #define SDEIMR  0xc4004
diff --git a/drivers/gpu/drm/i915/intel_crt.c b/drivers/gpu/drm/i915/intel_crt.c
index 197d4f3..0f950e7 100644
--- a/drivers/gpu/drm/i915/intel_crt.c
+++ b/drivers/gpu/drm/i915/intel_crt.c
@@ -191,7 +191,8 @@ static bool intel_ironlake_crt_detect_hotplug(struct drm_connector *connector)
 		DRM_DEBUG_KMS("timed out waiting for FORCE_TRIGGER");
 
 	if (turn_off_dac) {
-		I915_WRITE(PCH_ADPA, temp);
+		/* Make sure hotplug is enabled */
+		I915_WRITE(PCH_ADPA, temp | ADPA_CRT_HOTPLUG_ENABLE);
 		(void)I915_READ(PCH_ADPA);
 	}
 
-- 
1.7.2.2